Rock Mechanics
Ghorban Khandouzi; Mohammad Hossein Khosravi
Abstract
Granular materials used in engineering structures tend to experience arching under different geotechnical factors. Arching is a factor of load transfer from the destroyed zone to stable areas in these structures. Soil arching plays an important role in stress redistribution, settlement, and load on supports ...
Read More
Granular materials used in engineering structures tend to experience arching under different geotechnical factors. Arching is a factor of load transfer from the destroyed zone to stable areas in these structures. Soil arching plays an important role in stress redistribution, settlement, and load on supports in tunneling. This paper reviews the effect of various parameters on the development of soil arching and formation of expansion and contraction zones around the tunnel. A comprehensive literature review, analysis of new published papers, and investigations were conducted to study the effects of various parameters on soil arching. The results were obtained by studying the formation of shear bands, deformed zones, and their development. The achieved results of investigations show that soil arching and ground deformation around tunnels in sandy grounds are complex phenomena that require careful consideration during tunnel construction. Also the results reveal that despite the arching zone, a loosened zone with non-linear slip surfaces forms above the tunnel. With the onset of tunnel convergence, initial non-linear sliding surfaces appear, and the arching area forms above the tunnel. When tunnel convergence increases, a stable arch forms inside the arching zone, and a de-stressed area as a loosened zone is created under the stable arch. Understanding of soil arching, ground deformation, and the stable arch formed inside the arching zone around tunnels in sandy grounds is very important for the engineers evaluating stress redistribution and load on tunnel supports. Also understanding these issues can help the designers and practitioners make informed decisions during tunnel construction.
Gh. Khandouzi; H. Memarian; M. H. Khosravi
Abstract
The dynamic fracture characteristics of rock specimens play an important role in analyzing the fracture issues such as blasting, hydraulic fracturing, and design of supports. Several experimental methods have been developed for determining the dynamic fracture properties of the rock samples. However, ...
Read More
The dynamic fracture characteristics of rock specimens play an important role in analyzing the fracture issues such as blasting, hydraulic fracturing, and design of supports. Several experimental methods have been developed for determining the dynamic fracture properties of the rock samples. However, many used setups have been manufactured for metal specimens, and are not suitable and efficient for rocks. In this work, a new technique is developed to measure the dynamic fracture toughness of rock samples and fracture energy by modifying the drop weight test machine. The idea of wave transmission bar from the Hopkinson pressure bar test is applied to drop weight test. The intact samples of limestone are tested using the modified machine, and the results obtained are analyzed. The results indicate that the dynamic fracture toughness and dynamic fracture energy have a direct linear relationship with the loading rate. The dynamic fracture toughness and dynamic fracture energy of limestone core specimens under the loading rates of 0.12-0.56kN/µS are measured between 9.6-18.51MPa√m and 1249.73-4646.08J/m2, respectively. In order to verify the experimental results, a series of numerical simulation are conducted in the ABAQUS software. Comparison of the results show a good agreement where the difference between the numerical and experimental outputs is less than 4%. It can be concluded that the new technique on modifying the drop weight test can be applicable for measurement of the dynamic behavior of rock samples. However, more tests on different rock types are recommended for confirmation of the application of the developed technique for a wider range of rocks.