Enayatallah Emami Meybodi; Fatemeh Taajobian
Abstract
Due to the challenge of finding identical rock samples with varying grain sizes, investigating the impact of texture on rock material has been given less attention. However, macroscopic properties such as compressive strength, tensile strength, and modulus of elasticity can indicate microscopic properties ...
Read More
Due to the challenge of finding identical rock samples with varying grain sizes, investigating the impact of texture on rock material has been given less attention. However, macroscopic properties such as compressive strength, tensile strength, and modulus of elasticity can indicate microscopic properties like intergranular resistance properties influence rock fracture toughness. In this work, both the experimental and numerical methods are used to examine the effect of grain size on the mechanical properties of sandstone. Uniaxial compressive strength and indirect tensile tests are conducted on sandstone samples with varying grain sizes, and the particle flow code software is used to model the impact of grain dimensions on intergranular properties. Flat joint model is applied for numerical modeling in the particle flow code© software. The aim of this work is to validate the numerical model by peak strength failure and stress-strain curves to determine the effect of grain size on the mechanical behavior. The results show that increasing grain size significantly decrease compressive strength, tensile strength, and modulus of elasticity. The impact of the change in grain size is more significant on compressive strength than on the other two properties. The correlation coefficient for tensile strength and grain size is R2 = 0.57, while for modulus of elasticity and grain size, it is R2 = 0.79. The PFC software helps calibrate intergranular properties, and investigate the effect of changing grain size on these properties. Overall, this study offers valuable insights into the relationship between the grain size and the mechanical properties of sandstone, which can be useful in various engineering applications, especially in petroleum geo-mechanics.
M. Yazdi; A. Bahrami; Z. Alaminia; H. Jamali; M. A. Mackizadeh
Abstract
This research work introduces the Early Triassic, Late Triassic-Early Jurassic, and Early Cretaceous silica-rich sand levels at east and central Alborz, Kopeh-Dagh, and Central Iran, and compares them with the Permian silica-rich sand level in the Chirouk mine at east Iran. Ghoznavi and Gheshlaq loose ...
Read More
This research work introduces the Early Triassic, Late Triassic-Early Jurassic, and Early Cretaceous silica-rich sand levels at east and central Alborz, Kopeh-Dagh, and Central Iran, and compares them with the Permian silica-rich sand level in the Chirouk mine at east Iran. Ghoznavi and Gheshlaq loose sand in Alborz (Early Triassic-Early Jurassic), Soh quartzite in Central Iran (Early Triassic-Early Jurassic), Firuzeh sands with mud levels in Kopeh-Dagh (Early Cretaceous), and Sarnaza in Central Alborz (Late Triassic-Early Jurassic) silica-rich levels are studied in this work. Geochemical analysis and physical factors of the studied silica levels are checked regarding grain size, heat resistance, and steel molding. The laboratory and industrial methods used for washing, sieving, heating, molding, and controlling the purity of refractory sand levels show that the main difficulty of these levels within the molding process is intra-grain cracks, which spoils the alloy’s final product. The Early Triassic level in the Ghoznavi area has a high purity but the average grain size is below the steel molding standard. The Late Triassic to Early Jurassic levels in Alborz and Central Iran are oversize with grain cracks but can be fixed by the industrial refinery methods. The size of Early Cretaceous refractory sands of Firuzeh (Kopeh-Dagh) is below the standard molding process; it can be fixed by the washing and refinery methods. The systematic exploration methods show that all the studied silica-rich sand levels have an intra-grain collapse within the molding process. Final test shows that the Chirouk silica-rich levels can be used as refractory sand for cast and molding in the steel industry.
