Aalianvari, Ali
Developing GEP tree‑based, Neuro‑swarm, and whale optimization models for evaluating Groundwater Seepage into Tunnels: A Case Study [(Articles in Press)]
Aali Anvari, Ali
Financial Risk Management Prediction of Mining and Industrial Projects using Combination of Artificial Intelligence and Simulation Methods [Volume 13, Issue 4, 2022, Pages 1211-1223]
Abbas, Kamran
Selection of Appropriate Probability Distributions for Rock Analysis using Laser-induced Breakdown Spectroscopy [Volume 13, Issue 4, 2022, Pages 997-1013]
Abbas, Naeem
Analysis of Granite Failure Modes and Energy Conversion under Uniaxial Compression at Various Temperatures [Volume 14, Issue 2, 2023, Pages 493-506]
Abbas, Naeem
Enhanced Geotechnical Methods for Evaluating Slope Stability in Unconsolidated Strata: A Comprehensive Analysis [(Articles in Press)]
Abbas, Naeem
Exploring Ground Behavior in Underground Excavations Under Squeezing Stress Conditions [(Articles in Press)]
Abbasi, F.
Support Analysis of Main Tunnels in Tabas Mechanized Parvadeh Mine at Intersection with Coal Seam [Volume 12, Issue 3, 2021, Pages 711-724]
Abbasi, S.
Integrating Geophysical Attributes with New Cuckoo Search Machine-Learning Algorithm to Estimate Silver Grade Values–Case Study: Zarshouran Gold Mine [Volume 11, Issue 3, 2020, Pages 865-879]
Abbasi Azghan, Roozbeh
Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]
Abbasi Gharaei, A.
X-Ray mapping and the mineralogy pattern of nickel laterite ore: Bavanat, Fars, Iran [Volume 10, Issue 3, 2019, Pages 811-820]
Abbaslou, H.
Mechanical Properties of Low Plasticity Clay Soil Stabilized with Iron Ore Mine Tailing and Portland Cement [Volume 11, Issue 3, 2020, Pages 837-853]
Abbaszade, S.
Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]
Abbaszadeh, malihehe
Developing GEP tree‑based, Neuro‑swarm, and whale optimization models for evaluating Groundwater Seepage into Tunnels: A Case Study [(Articles in Press)]
Abbaszadeh, S.
A fuzzy-based prognosis of ore mineralization potentials in Ramand region (Qazvin province) [Volume 8, Issue 3, 2017, Pages 403-418]
Abd El-Fatah, Ahmed Abd El-Dayiem
Integration of Landsat-8 and Reflectance Spectroscopy data for Mapping of Late Neoproterozoic Igneous Ring Complexes in an Arid Environment: a Case Study of Gebel El-Bakriyah Area, Eastern Desert, Egypt [Volume 14, Issue 1, 2023, Pages 13-31]
Abdelhalim, Ahmed
Implementation of Space-Borne Optical Data and Field Investigation for Geo-structural Mapping of an Interior Rift Basin: A Case Study from Kharit Area, Southeastern Desert, Egypt1037 [Volume 14, Issue 4, 2023, Pages 1037-1059]
Abdi, Salad Omar
Applications of GIS and Remote Sensing in Highway Project: a Review [Volume 14, Issue 2, 2023, Pages 375-388]
Abdolahzadeh, A. A.
Development of Geometallurgical Indices for Semi-Autogenous Grinding at Sarcheshmeh Porphyry Copper Mine [Volume 11, Issue 2, 2020, Pages 375-385]
Abdolghanizadeh, K.
Effects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar [Volume 10, Issue 4, 2019, Pages 967-978]
Abdollahei Sharif, J.
A Hybrid Fuzzy MCDM Approach to Determine an Optimal Block Size in Open-Pit Mine Modeling: a Case Study [Volume 11, Issue 2, 2020, Pages 611-627]
Abdollahei Sharif, J.
Investigating and Ranking Blasting Patterns to Reduce Ground Vibration using Soft Computing Approaches and MCDM Technique [Volume 11, Issue 3, 2020, Pages 881-897]
Abdollahi, H.
A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]
Abdollahi, H.
Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]
Abdollahi, H.
Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]
Abdollahi, H.
Effects of Flocculant, Surfactant, Coagulant, and Filter Aid on Efficiency of Filtration Processing of Copper Concentrate: Mechanism and Optimization [Volume 11, Issue 1, 2020, Pages 119-141]
Abdollahi, H.
Dissolution of Nickel and Cobalt from Iron-Rich Laterite Ores Using Different Organic Acids [Volume 11, Issue 3, 2020, Pages 779-797]
Abdollahi, H.
Modeling and Optimizing Aluminum Hydroxide Precipitation Process in Industrial Scale; case study: Iran Alumina Plant [Volume 12, Issue 1, 2021, Pages 235-251]
Abdollahi, H.
Direct and Indirect Bio-Leaching of Co and Ni from an Iron-Rich Laterite Ore using Delftia Acidovorans and Acidithiobacillus Ferrooxidans [Volume 12, Issue 2, 2021, Pages 471-489]
Abdollahi, Hadi
Mineralogy and Characterisation Studies Aimed at Coal Desulfurization Process on Iran’s Largest Coalfield [Volume 14, Issue 1, 2023, Pages 277-293]
Abdollahi, Hadi
Bioflotation and Bioleaching as an Alternative Method for Desulphurization and Ash Reduction in Tabas Coal [Volume 15, Issue 2, 2024, Pages 581-595]
Abdollahi, M.
Comparison of Copper Dissolution in Chalcopyrite Concentrate Bioleaching with Acidianus Brierleyi in Different Initial pH Values [Volume 11, Issue 3, 2020, Pages 753-764]
Abdollahi, M.
A Proposed Biochemical Protocol to Isolate and Characterize Acidophilic Bacteria from Tailings Soil [Volume 11, Issue 4, 2020, Pages 1157-1171]
Abdollahi, M.
Characterization of Leaching Feed and Residue of Mechanically Activated Sphalerite [Volume 12, Issue 4, 2021, Pages 1029-1040]
Abdollahi, Mahmood
Prediction of recovery of gold thiosulfate on activated carbon using artificial neural networks [Volume 5, Issue 1, 2014, Pages 55-66]
Abdollahi, Mohammad Sina
A New method for stability analysis of chain pillar in longwall mining by using Coulmann graphical method [(Articles in Press)]
Abdollahi Kamran, M.
Ranking sawability of dimension stone using PROMETHEE method [Volume 6, Issue 2, 2015, Pages 263-271]
Abdollahipour, A.
Numerical investigation of effect of crack geometrical parameters on hydraulic fracturing process of hydrocarbon reservoirs [Volume 7, Issue 2, 2016, Pages 205-214]
Abdollahipour, A.
Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]
Abdollahipour, A.
Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]
Abdollahipour, A.
Wellbore Trajectory Optimization of an Iranian Oilfield Based on Mud Pressure and Failure Zone [Volume 11, Issue 1, 2020, Pages 193-220]
Abdollahipour, A.
Calculation of Optimum Soil Conditioning in EPB Tunneling (Case Study: Ahwaz Metro Project, Line 1) [Volume 12, Issue 2, 2021, Pages 501-513]
Abdollahipour, A.
A Modified Indirect Boundary Element Analysis for Fatigue Behavior Assessment of Rock-Like Materials Based on Linear Elastic Fracture Mechanics [Volume 12, Issue 4, 2021, Pages 1189-1203]
Abdollahipour, A.
Cavity Growth in Underground Coal Gasification Method by Considering Cleat Length and Inclination of Coal with Elasto-Brittle Behavior [Volume 13, Issue 2, 2022, Pages 607-625]
Abdollahipour, Abolfazl
Simulation of Crack Propagation Mechanism in Porous Media using Modified linear Element Displacement Discontinuity Method [Volume 13, Issue 3, 2022, Pages 903-927]
Abdollahipour, Abolfazl
Analytical Solutions of First-order Displacement Discontinuity Elements in Poroelasticity [Volume 14, Issue 2, 2023, Pages 601-618]
Abdollahipour, Abolfazl
Coupling discontinuous deformation analysis and displacement discontinuity method for simulating failure mechanism in geomaterials [(Articles in Press)]
Abdollahisharif, J.
Monitoring and assessment of pollutants resulting from bench-blasting operations [Volume 7, Issue 1, 2016, Pages 109-118]
Abdollahi Sharif, J.
Determination of geochemical anomalies and gold mineralized stages based on litho-geochemical data for Zarshuran Carlin-like gold deposit (NW Iran) utilizing multi-fractal modeling and stepwise factor analysis [Volume 8, Issue 4, 2017, Pages 593-610]
Abdollahy, M.
An applied comparison between conventional pre-dispersed solvent extraction (PDSE) contactors and new dissolved nitrogen PDSE (DNPDSE) ones [Volume 6, Issue 2, 2015, Pages 159-168]
Abdollahy, M.
Prediction of effect of fine particle removal on efficiency of a spiral circuit by size-by-size partition curves [Volume 8, Issue 4, 2017, Pages 567-571]
Abdollahy, M.
Interactional effects of bubble size, particle size, and collector dosage on bubble loading in column flotation [Volume 9, Issue 1, 2018, Pages 107-116]
Abdollahy, M.
An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]
Abdollahy, M.
Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]
Abdollahy, M.
Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]
Abdollahy, M.
Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]
Abdollahy, M.
Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]
Abdollahy, M.
Investigation of Mechanism of Adsorption of Xanthate and Hydroxamate on Malachite [Volume 11, Issue 3, 2020, Pages 921-933]
Abdollahy, Mahmoud
Kinetics of chemical leaching of chalcocite from low-grade copper ore: size-distribution behavior [Volume 6, Issue 1, 2015, Pages 109-118]
Abdollahzadeh, A.
Estimation of Cadmium and Uranium in a stream sediment from Eshtehard region in Iran using an Artificial Neural Network [Volume 7, Issue 1, 2016, Pages 97-107]
Abdullah, Rini Asnida
3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]
Abedi, A.
GIS modelling for Au-Pb-Zn potential mapping in Torud-Chah Shirin area-Iran [Volume 1, Number 1, 2010]
Abedi, A.
Using Trifolium Alexanderium for Phytoremediation of some heavy metals in tailings dam in Anjir-Tange coal washing plant, Mazandaran, Iran [Volume 6, Issue 2, 2015, Pages 141-150]
Abedi, M.
Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]
Abedi, M.
Geostatistical Modeling of Electrical Resistivity Tomography for Imaging Porphyry Cu Mineralization in Takht-e-Gonbad Deposit, Iran [Volume 11, Issue 1, 2020, Pages 143-159]
Abedi, M.
An Optimum Selection of Simulated Geological Models by Multi-Point Geostatistics and Multi-Criteria Decision-Making Approaches; a Case Study in Sungun Porphyry-Cu deposit, Iran [Volume 11, Issue 2, 2020, Pages 481-503]
Abedi, M.
Stable Downward Continuation of Airborne Potential Field Geophysical Data: an Investigation of Stabilizer Family [Volume 12, Issue 2, 2021, Pages 547-567]
Abedi, Maysam
Approximate resistivity and susceptibility mapping from airborne electromagnetic and magnetic data, a case study for a geologically plausible porphyry copper unit in Iran [Volume 4, Issue 2, 2013, Pages 133-146]
Abedi, Maysam
Enhancing magnetic signals in unexploded ordnances (UXO) detection based on edge-preserved stable downward continuation method [Volume 5, Issue 1, 2014, Pages 13-24]
Abedi, Maysam
AN-EUL method for automatic interpretation of potential field data in unexploded ordnances (UXO) detection [Volume 5, Issue 2, 2014, Pages 67-77]
Abedi, Maysam
Application of Fuzzy Gamma Operator for Mineral Prospectivity Mapping, Case Study: Sonajil Area [Volume 14, Issue 3, 2023, Pages 981-997]
Abedini, M.
Porosity classification from thin sections using image analysis and neural networks including shallow and deep learning in Jahrum formation [Volume 9, Issue 2, 2018, Pages 513-525]
Abedi-Orang, B.
Experimental Studies, Response Surface Methodology and Molecular Modeling for Optimization and Mechanism Analysis of Methylene Blue Dye Removal by Different Clays [Volume 11, Issue 4, 2020, Pages 1079-1093]
Abkhoshk, E.
An investigation of the particle size effect on coal flotation kinetics using multivariable regression [Volume 1, Number 1, 2010]
Abubakar, Ozigi
Granite Downstream Production Dependent Size and Profitability Assessment: an application of Mathematical-based Artificial Intelligence Model and WipFrag Software [Volume 15, Issue 2, 2024, Pages 497-515]
Abubeker, Y.
Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]
Abuelella, Islam
Implementation of Space-Borne Optical Data and Field Investigation for Geo-structural Mapping of an Interior Rift Basin: A Case Study from Kharit Area, Southeastern Desert, Egypt1037 [Volume 14, Issue 4, 2023, Pages 1037-1059]
Abu El Ghar, M.
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Adamu, C. Iorfa
Chemical Characteristics of Discharges from Two Derelict Coal Mine Sites in Enugu Nigeria: Implication for Pollution and Acid Mine Drainage [Volume 12, Issue 1, 2021, Pages 89-111]
Adebayo, Babatunde
Improvement of Drill Bit-Button Performance and Efficiency during Drilling: an application of LSTM Model to Nigeria Southwest Mines [Volume 14, Issue 4, 2023, Pages 1121-1139]
Adediran, Oluwatomisin Victoria
Mine Geo-environment Assessment: Carbonate Rock Mine Waste as Construction Material Addictive and Coupled with Pollution Index Model [Volume 14, Issue 1, 2023, Pages 179-196]
Adeel, Muhammad Bilal
Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]
Adenikinju, A.
Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]
Aderoju, Raymond O
Mine Geo-environment Assessment: Carbonate Rock Mine Waste as Construction Material Addictive and Coupled with Pollution Index Model [Volume 14, Issue 1, 2023, Pages 179-196]
Adib, A.
Detection of Zones Based on Ore and Gangue Using Fractal and Multivariate Analysis in Chah Gaz Iron Ore Deposit, Central Iran [Volume 11, Issue 2, 2020, Pages 453-466]
Adib, A.
Delineation of Iron Alteration Zones using Spectrum-Area Fractal Model and TOPSIS Decision-Making Method in Tarom Metallogenic Zone, NW Iran [Volume 13, Issue 2, 2022, Pages 503-525]
Adil, M.
Rock Fall Hazard Assessment using GeoRock 2D along Swat Motorway, Pakistan [Volume 12, Issue 2, 2021, Pages 351-365]
Adjiski, V.
Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]
Adotey, Dennis Kpakpo
Radiological Baseline Assessment of a Naturally Occurring Radioactive Material (NORM) Waste Disposal Facility in Ghana [Volume 14, Issue 1, 2023, Pages 33-46]
Aduvire, O
Assessment of natural attenuation of acid mine drainage pollutants in El Bierzo and Odiel basins: A case study [Volume 2, Issue 2, 2011, Pages 78-85]
Advay, Mehran
Evaluation of the Slope Stability under Geological Conditions Using Multi-Factorial Fuzzy Classification System [(Articles in Press)]
Afayou, Afayou
Enhanced Geotechnical Methods for Evaluating Slope Stability in Unconsolidated Strata: A Comprehensive Analysis [(Articles in Press)]
AFENI, BUSUYI THOMAS
Improvement of Drill Bit-Button Performance and Efficiency during Drilling: an application of LSTM Model to Nigeria Southwest Mines [Volume 14, Issue 4, 2023, Pages 1121-1139]
Afradi, Alireza
Performance Prediction of a Hard Rock TBM using Statistical and Artificial Intelligence Methods [Volume 15, Issue 1, 2024, Pages 323-343]
Afrasiabian, Bijan
Evaluation of Effects of Parameters of Blast Damage Factor, Sub-drilling, Decoupling, and Inter-hole Delay Time on Peak Particle Velocity using Numerical Modeling [Volume 14, Issue 2, 2023, Pages 545-563]
Afzal, D.
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Afzal, P.
Determination of geochemical anomalies and gold mineralized stages based on litho-geochemical data for Zarshuran Carlin-like gold deposit (NW Iran) utilizing multi-fractal modeling and stepwise factor analysis [Volume 8, Issue 4, 2017, Pages 593-610]
Afzal, P.
Application of spectrum-volume fractal modeling for detection of mineralized zones [Volume 9, Issue 2, 2018, Pages 371-378]
Afzal, P.
Comparing ordinary kriging and advanced inverse distance squared methods based on estimating coal deposits; case study: East-Parvadeh deposit, central Iran [Volume 9, Issue 3, 2018, Pages 753-760]
Afzal, P.
Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]
Afzal, P.
Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]
Afzal, P.
Identification of Geochemical Anomalies Using Fractal and LOLIMOT Neuro-Fuzzy modeling in Mial Area, Central Iran [Volume 11, Issue 1, 2020, Pages 99-117]
Afzal, P.
Detection of Zones Based on Ore and Gangue Using Fractal and Multivariate Analysis in Chah Gaz Iron Ore Deposit, Central Iran [Volume 11, Issue 2, 2020, Pages 453-466]
Afzal, P.
A Comprehensive Study of Several Meta-Heuristic Algorithms for Open-Pit Mine Production Scheduling Problem Considering Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 721-736]
Afzal, P.
Delineation of Gas Content Zones Using N-S Fractal Model in Coking Coal Deposits [Volume 12, Issue 1, 2021, Pages 181-189]
Afzal, P.
Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]
Afzal, P.
Delineation of Iron Alteration Zones using Spectrum-Area Fractal Model and TOPSIS Decision-Making Method in Tarom Metallogenic Zone, NW Iran [Volume 13, Issue 2, 2022, Pages 503-525]
Afzal, Peyman
Compressional and Shear Interval Velocity Modeling to Determine Formation Pressures in an Oilfield of SW Iran [Volume 13, Issue 3, 2022, Pages 851-873]
Afzal, Peyman
Outlining of High-quality Parts of Coal by Concentration–Volume Fractal Model in North Kochakali Coal Deposit, Central Iran [Volume 15, Issue 2, 2024, Pages 557-579]
Agah, A.
Studying Effect of Modifying Nano-Mineral Adsorbents on Efficiency of Dye Removal from Industrial Effluents [Volume 12, Issue 1, 2021, Pages 219-233]
Agah, A.
Fe3O4@TiO2@V2O5 as an Efficient Magnetic Nanoparticle for Synthesis of Di-Indolyl Oxindole Derivatives [Volume 12, Issue 4, 2021, Pages 1041-1053]
Agah, Azadeh
2D Simulation of Dynamic Transportation of Volatile Hydrocarbons in Vadose Zone of Tehran Oil Refinery and Industrial area of Ray, Tehran, Iran [Volume 13, Issue 3, 2022, Pages 809-820]
Aghababaei, S.
Applying a Technical-Economic Approach to Calculate a Suitable Panel Width for Longwall Mining Method [Volume 12, Issue 1, 2021, Pages 113-126]
Aghababaei, Sajjad
Prediction of Roof Failure in Pre-driven Entries and Selecting a Suitable Type of Recovery Room Method in Longwall Mining [Volume 15, Issue 1, 2024, Pages 223-237]
Aghababaie, H.
Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]
Aghababaie, Hamid
A laboratory study of rock properties affecting the penetration rate of pneumatic top hammer drills [Volume 5, Issue 1, 2014, Pages 25-34]
Aghajani, H.
Subsurface modeling of mud volcanoes, using density model and analysis of seismic velocity [Volume 6, Issue 1, 2015, Pages 31-39]
Aghajani Bazzazi, A.
Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines [Volume 10, Issue 4, 2019, Pages 903-916]
Aghajani Bazzazi, A.
Prediction of Blasting Cost in Limestone Mines Using Gene Expression Programming Model and Artificial Neural Networks [Volume 11, Issue 1, 2020, Pages 281-300]
Aghajani Bazzazi, A.
A Comprehensive Study of Several Meta-Heuristic Algorithms for Open-Pit Mine Production Scheduling Problem Considering Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 721-736]
Aghajani Bazzazi, Abbas
Financial Risk Management Prediction of Mining and Industrial Projects using Combination of Artificial Intelligence and Simulation Methods [Volume 13, Issue 4, 2022, Pages 1211-1223]
Ahangari, K.
A field investigation of application of digital terrestrial photogrammetry to characterize geometric properties of discontinuities in open-pit slopes [Volume 8, Issue 3, 2017, Pages 455-465]
Ahangari, K.
Effect of segmental joint stiffness on tunnel lining internal forces under static conditions [Volume 10, Issue 4, 2019, Pages 1031-1043]
Ahangari, K.
Prediction of Blasting Cost in Limestone Mines Using Gene Expression Programming Model and Artificial Neural Networks [Volume 11, Issue 1, 2020, Pages 281-300]
Ahangari, K.
Effect of Segmental Joint on Internal Forces in Tunnel Lining under Seismic Loading by Numerical Method [Volume 11, Issue 3, 2020, Pages 737-751]
Ahangari, K.
Copper Price Prediction using Wave Count with Contribution of Elliott Waves [Volume 11, Issue 3, 2020, Pages 825-835]
Ahangari, K.
A Numerical Investigation of TBM Disc Cutter Life Prediction in Hard Rocks [Volume 11, Issue 4, 2020, Pages 1095-1113]
Ahangari, K.
Analysis of Grinding and Chipping Processes beneath Disc Cutters of Hard Rock Tunnel Boring Machines (Case study: Uma-Oya water Conveyance Tunnel, SriLanka) [Volume 12, Issue 1, 2021, Pages 281-297]
Ahangari, Kaveh
An Investigation into Bench Health Monitoring under Blast Loading in Hoek-Brown Failure Criterion using Finite Difference Method [Volume 13, Issue 3, 2022, Pages 875-889]
Ahangari, Kaveh
Evaluation of Effects of Parameters of Blast Damage Factor, Sub-drilling, Decoupling, and Inter-hole Delay Time on Peak Particle Velocity using Numerical Modeling [Volume 14, Issue 2, 2023, Pages 545-563]
Ahmad, I.
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Ahmad, Z.
Optimization of Process Parameters for Enhanced Up-gradation of Qilla Saifullah Copper ore through Froth Floatation Technique [Volume 12, Issue 3, 2021, Pages 633-649]
Ahmadi, A. R.
Extension of Excavation Damaged Zone Due to Longwall Working Effect [Volume 7, Issue 1, 2016, Pages 13-24]
Ahmadi, M.
A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]
Ahmadi, M.
Study of Damaged Zone around Circular Opening Using Acoustic Emission Technique [Volume 11, Issue 2, 2020, Pages 433-451]
Ahmadi, Mohammad Hossein
Box-Behnken Design of Experiments Investigation forAdsorption of Cd2+ onto carboxymethyl Chitosan Magnetic Nanoparticles [Volume 3, Issue 1, 2012, Pages 51-59]
Ahmadi, N. R.
Application of Power-Law Frequency Fractal Model for Recognition of Vertical Cu Distribution in Milloieh Porphyry Deposit, SE Iran [Volume 11, Issue 2, 2020, Pages 555-562]
Ahmadi, N. R.
Delineation of Gas Content Zones Using N-S Fractal Model in Coking Coal Deposits [Volume 12, Issue 1, 2021, Pages 181-189]
Ahmadi, R.
Effect of thermal treatment on specific rate of breakage of manganese ore [Volume 9, Issue 2, 2018, Pages 339-348]
Ahmadi, R.
Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]
Ahmadi, R.
Exploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study [Volume 9, Issue 4, 2018, Pages 1009-1018]
Ahmadi Azqhandi, Mohammad Hossein
Box-Behnken Design of Experiments Investigation forAdsorption of Cd2+ onto carboxymethyl Chitosan Magnetic Nanoparticles [Volume 3, Issue 1, 2012, Pages 51-59]
Ahmed, Nasar Male
Selection of Appropriate Probability Distributions for Rock Analysis using Laser-induced Breakdown Spectroscopy [Volume 13, Issue 4, 2022, Pages 997-1013]
Akbari, A.
Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade [Volume 8, Issue 4, 2017, Pages 539-544]
Akbari, S.
A 3D Finite-Difference Analysis of Interaction between a Newly-Driven Large Tunnel with Twin Tunnels in Urban Areas [Volume 11, Issue 3, 2020, Pages 809-823]
Akbari Dehkharghani, A.
Copper Price Prediction using Wave Count with Contribution of Elliott Waves [Volume 11, Issue 3, 2020, Pages 825-835]
Akbari Dehkharghani, A.
A New Technical and Economic Model to Calculate Specific Charge and Specific Drilling Using Hole Diameter, Bench Height, Uniaxial Compressive Strength, and Joint Set Orientation [Volume 11, Issue 4, 2020, Pages 991-1005]
Akbari Noghabi, K.
A Proposed Biochemical Protocol to Isolate and Characterize Acidophilic Bacteria from Tailings Soil [Volume 11, Issue 4, 2020, Pages 1157-1171]
Akhyani, M.
Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process [Volume 10, Issue 3, 2019, Pages 559-574]
Akinlabi, Adams Abiodun
Granite Downstream Production Dependent Size and Profitability Assessment: an application of Mathematical-based Artificial Intelligence Model and WipFrag Software [Volume 15, Issue 2, 2024, Pages 497-515]
Akintola, George O
A Rule-based Expert System for Selection of Rehabilitation Strategies for Abandoned Mines in South Africa [Volume 14, Issue 4, 2023, Pages 1171-1181]
Akintunde, E. A.
Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]
Akni, A.
A Safe and Sustainable Development in a Hygiene and Healthy Company Using Decision Matrix Risk Assessment Technique: a case study [Volume 11, Issue 2, 2020, Pages 363-373]
Akpan, L.
Chemical Characteristics of Discharges from Two Derelict Coal Mine Sites in Enugu Nigeria: Implication for Pollution and Acid Mine Drainage [Volume 12, Issue 1, 2021, Pages 89-111]
Akrami, A.
Numerical modeling of hydraulic fracturing in carbonate rocks of Bangestan reservoir [Volume 9, Issue 1, 2018, Pages 117-126]
Alamdar, K.
An improved method for geological boundary detection of potential field anomalies [Volume 1, Number 2, 2010]
Alamdari, E. K.
Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]
Alamdari, S.
Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]
Alaminia, Z.
Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]
Alavi, D.
Mechanism of Zinc Complexation by Alkaline Ligands: A Molecular Modelling Study [Volume 13, Issue 2, 2022, Pages 421-430]
Alavi, Iraj
A New Technical and Economic Approach to Aptimal Plant Species Selection for Open-pit Mine Reclamation Process [Volume 13, Issue 4, 2022, Pages 1091-1105]
Aleali, Mohsen
Outlining of High-quality Parts of Coal by Concentration–Volume Fractal Model in North Kochakali Coal Deposit, Central Iran [Volume 15, Issue 2, 2024, Pages 557-579]
Al Faisal, Sh.
A review of Rock Burst’s Experimental Progress, Warning, Prediction, Control and Damage Potential Measures [Volume 11, Issue 1, 2020, Pages 31-48]
Ali, Faissal
Prediction of Iron Ore Grade using Artificial Neural Network, Computational Method, and Geostatistical Technique at El-Gezera Area, Western Desert, Egypt [(Articles in Press)]
Ali, M.
Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]
Ali, Muhammad
The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]
Ali, Wahid
The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]
Ali, Wahid
3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]
Ali, Wahid
Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]
Alikhani, A.
Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]
Alikhani, A.
Investigation of Bishop’s and Janbu’s Models Capabilities on Slope Stability Problems with Special Consideration to Open-Pit Mining Operations [Volume 11, Issue 1, 2020, Pages 161-170]
Alilou, S. K.
Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]
Ali Madadi, S.
Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]
Alimoradi, A.
Integrating Geophysical Attributes with New Cuckoo Search Machine-Learning Algorithm to Estimate Silver Grade Values–Case Study: Zarshouran Gold Mine [Volume 11, Issue 3, 2020, Pages 865-879]
Alimoradi, A.
Optimizing Extreme Learning Machine Algorithm using Particle Swarm Optimization to Estimate Iron Ore Grade [Volume 12, Issue 2, 2021, Pages 397-411]
Alimoradi, A.
Mineral Potential Modeling of Porphyry Copper Deposits using Continuously-Weighted Spatial Evidence Layers and Union Score Integration Method [Volume 12, Issue 3, 2021, Pages 743-751]
Alimoradi, Andisheh
Application of Artificial Neural Networks and Support Vector Machines for carbonate pores size estimation from 3D seismic data [Volume 4, Issue 1, 2013, Pages 1-14]
Alinia, F.
Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]
Alipenhani, B.
Support Analysis of Main Tunnels in Tabas Mechanized Parvadeh Mine at Intersection with Coal Seam [Volume 12, Issue 3, 2021, Pages 711-724]
Alipenhani, B.
Determination of Caving Hydraulic Radius of Rock Mass in Block Caving Method using Numerical Modeling and Multivariate Regression [Volume 13, Issue 1, 2022, Pages 217-233]
Alipenhani, B.
Cavability Assessment of Rock Mass in Block Caving Mining Method based on Numerical Simulation and Response Surface Methodology [Volume 13, Issue 2, 2022, Pages 579-606]
Alipenhani, Behnam
Determination of the caving zone height using numerical and physical modeling based on the undercutting method, joint dip, and spacing [(Articles in Press)]
Alipour, A.
Robust production scheduling in open-pit mining under uncertainty: a box counterpart approach [Volume 8, Issue 2, 2017, Pages 255-267]
Alipour, S.
Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]
Alipour, S.
Metal(loid) uptake of Sonchus oleraceus grown around Cheshmeh-Konan copper deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 517-528]
Alipour Shahsavari, M.
Identification of Geochemical Anomalies Using Fractal and LOLIMOT Neuro-Fuzzy modeling in Mial Area, Central Iran [Volume 11, Issue 1, 2020, Pages 99-117]
Alishahi, Saeed
Prediction of recovery of gold thiosulfate on activated carbon using artificial neural networks [Volume 5, Issue 1, 2014, Pages 55-66]
Aliyari, F.
Determination of geochemical anomalies and gold mineralized stages based on litho-geochemical data for Zarshuran Carlin-like gold deposit (NW Iran) utilizing multi-fractal modeling and stepwise factor analysis [Volume 8, Issue 4, 2017, Pages 593-610]
Aliyari, F.
Application of Fuzzy Gamma Operator to Generate Mineral Prospectivity Mapping for Cu-Mo Porphyry Deposits (Case Study: Kighal-Bourmolk Area, Northwestern Iran) [Volume 13, Issue 1, 2022, Pages 129-153]
Alizadeh, Hasan
Investigation of Fractures Effect on Building Stone Utilization: a Case Study [Volume 14, Issue 2, 2023, Pages 565-576]
Alizadeh, M.
Mineralogical and physical beneficiation studies for iron extraction from Bardaskan titanomagnetite placer deposit [Volume 8, Issue 2, 2017, Pages 191-201]
Alizadeh, R.
A Modified Indirect Boundary Element Analysis for Fatigue Behavior Assessment of Rock-Like Materials Based on Linear Elastic Fracture Mechanics [Volume 12, Issue 4, 2021, Pages 1189-1203]
Alizadeh Sevary, B.
The use of analytic hierarchy process in the selection of suitable excavation machine for Dez - Qomroud water conveyance tunnel (lot 1&2), Iran [Volume 2, Issue 1, 2011]
Alonso-Gonzalez, O.
Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]
Alorro, R. D.
Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]
Altaf, Sehla
Sustainable Utilization of Waste Foundry Sand and Sodium Chloride in Soil Stabilization [Volume 14, Issue 3, 2023, Pages 897-908]
Amani, H.
Gallium extraction from Jajarm Bayer process liquor using micro-emulsions [Volume 8, Issue 2, 2017, Pages 269-276]
Ameri Shahrabi, M. J.
A New 3D Model for Shear Wave Velocity by Utilizing Conventional Petrophysical Logs and Geostatistical Method [Volume 13, Issue 2, 2022, Pages 431-447]
Amin, I.
Rock Fall Hazard Assessment using GeoRock 2D along Swat Motorway, Pakistan [Volume 12, Issue 2, 2021, Pages 351-365]
Amini, A.
Iron leaching from bauxite ore in hydrochloric acid using response surface methodology [Volume 6, Issue 1, 2015, Pages 103-108]
Amini, Erfan
Block Toppling Stability of Rock Block with Rounded Edges using Sarma Approach [Volume 14, Issue 1, 2023, Pages 341-353]
Amini, Erfan
Identifying Corresponding Earthquake of Mobarak Abad Landslide, Northeast Tehran, Iran [Volume 14, Issue 4, 2023, Pages 1343-1359]
Amini, M.
Influence of modeling material on undercut slope failure mechanism [Volume 8, Issue 4, 2017, Pages 645-662]
Amini, M.
Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]
Amini, M.
Numerical analysis of slide-head-toppling failure [Volume 10, Issue 4, 2019, Pages 1001-1011]
Amini, M.
Numerical Modeling of Rock Slopes with a Potential of Block-Flexural Toppling Failure [Volume 11, Issue 1, 2020, Pages 247-259]
Amini, M.
First Finding of Satin Spar Gemstone in Iran, Folded Zagros Zone, Fars Region [Volume 11, Issue 4, 2020, Pages 1039-1046]
Amini, M.
Semi-Analytical Study of Settlement of Two Interfering Foundations Placed on a Slope [Volume 12, Issue 2, 2021, Pages 457-470]
Amini, M. S.
Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]
Amini, R.
Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]
Amini Khoshalan, H.
Developing New Models for Flyrock Distance Assessment in Open-Pit Mines [Volume 13, Issue 2, 2022, Pages 375-389]
Amini Khoshalan, Hasel
Evaluation the Effect of Blast Pattern on Post-Failure Rate around the Miyaneh-Ardabil Railway Tunnel [(Articles in Press)]
Amir Afshar, H.
Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium [Volume 1, Number 1, 2010]
Amiri, A.
Sub-pixel classification of hydrothermal alteration zones using a kernel-based method and hyperspectral data; A case study of Sarcheshmeh Porphyry Copper Mine and surrounding area, Kerman, Iran [Volume 8, Issue 4, 2017, Pages 555-565]
Amiri Hossaini, M.
Estimation of In-Situ Block Size Distribution in Jointed Rock Masses using Combined Photogrammetry and Discrete Fracture Network [Volume 13, Issue 1, 2022, Pages 175-184]
Amiri Shiraz, E.
Evaluating performance of natural sepiolite and zeolite nanoparticles for nickel, antimony, and arsenic removal from synthetic wastewater [Volume 9, Issue 4, 2018, Pages 1049-1064]
Amirkhani Shiraz, F.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Amoatey, Edith Amoakie
Radiological Baseline Assessment of a Naturally Occurring Radioactive Material (NORM) Waste Disposal Facility in Ghana [Volume 14, Issue 1, 2023, Pages 33-46]
Amoun, sadegh
Investigating Effect of Soil Grading Parameters on Tool Wear in Mechanized Tunneling using EPB-TBM Machine [Volume 15, Issue 1, 2024, Pages 301-321]
Amoun, sadegh
Cutting Tools Wear in Soft Ground Tunneling: Field and Experimental Insights [(Articles in Press)]
Amponsah, Prince Ofori
Mineral prospectivity modeling over the Julie Tenement of Northwestern (NW) Ghana using geophysical datasets [(Articles in Press)]
An, H.J.
Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]
Anemangely, M.
Determination of constant coefficients of Bourgoyne and Young drilling rate model using a novel evolutionary algorithm [Volume 8, Issue 4, 2017, Pages 693-702]
Angesom, Gebretsadik
Artificial Neural Network Modeling as an Approach to Limestone Blast Production Rate Prediction: a Comparison of PI-BANN and MVR Models [Volume 14, Issue 2, 2023, Pages 375-388]
Ansari, A. H.
An improved method for geological boundary detection of potential field anomalies [Volume 1, Number 2, 2010]
Ansari, Emad
Investigating Effect of Induced Stresses due to Coal Panel Extraction on Next Panel Strata behavior during Mechanized Longwall Mining: a Case Study [Volume 15, Issue 1, 2024, Pages 381-399]
Ansari, M.
A Correlation for Estimating LCPC Abrasivity Coefficient using Rock Properties [Volume 11, Issue 3, 2020, Pages 799-808]
Ansari, Taha
Investigating Effect of Soil Grading Parameters on Tool Wear in Mechanized Tunneling using EPB-TBM Machine [Volume 15, Issue 1, 2024, Pages 301-321]
Ansari Jafari, M.
Developing a method for identification of net zones using log data and diffusivity equation [Volume 2, Issue 1, 2011]
Anselme Kamga, M.
Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]
Arab Amiri, Alireza
Forward Modeling of Frequency-domain Helicopter-borne Electromagnetic Data using an Improved Finite Difference Method [Volume 13, Issue 4, 2022, Pages 1067-1089]
Arab Amiri, A.R.
Using a combination of genetic algorithm and particle swarm optimization algorithm for GEMTIP modeling of spectral-induced polarization data [Volume 10, Issue 2, 2019, Pages 493-505]
Arab Amiri, A.R.
An Exploration Model for A Gold Deposit in Kervian Area, Kurdistan Province, Iran, using a Combination of Geophysical Results with Geological Information and Other Exploratory Data [Volume 12, Issue 2, 2021, Pages 413-424]
Arab Amiri, A.R.
Modeling of Induced Polarization and Resistivity Data for Prospecting and Exploration of Polymetallic Deposit in Kaboudan Area, East of Iran [Volume 12, Issue 3, 2021, Pages 693-710]
Arab-Amiri, Alireza
Karstic water exploration using the Schlumberger VES and dipole–dipole resistivity profiling surveys in the Tepal area, west of Shahrood, Iran [Volume 5, Issue 1, 2014, Pages 1-12]
Arab-Amiri, A. R.
Inverse modeling of HEM data using a new inversion algorithm [Volume 1, Number 2, 2010]
Arab-Amiri, A.R.
A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]
Arabzadeh, Bahareh
Back-calculation of mechanical parameters of shell and balls materials from discrete element method simulations [Volume 3, Issue 1, 2012, Pages 33-40]
Aram, R.
Characterization of Leaching Feed and Residue of Mechanically Activated Sphalerite [Volume 12, Issue 4, 2021, Pages 1029-1040]
Arashi, M.
Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]
Arceo-Olague, J. G
Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]
Arefi, H.
Investigating Alteration Zone Mapping Using EO-1 Hyperion Imagery and Airborne Geophysics Data [Volume 11, Issue 2, 2020, Pages 405-417]
Arefnia, Ali
Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]
Arghavani, E.
Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade [Volume 8, Issue 4, 2017, Pages 539-544]
Arghavani, E.
Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]
Arghavani, E.
Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]
Arian, M. A.
Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]
Arian, Mehran
Geometrical Analysis of Fractures and Mineralized Veins of Gazkhizan Copper Deposit in Semnan Province, Iran [Volume 14, Issue 1, 2023, Pages 197-216]
Arian, Mehran
Multifractal modelling of gold mineralization and lineaments in the 1:100,000 Chaapaan sheet (NW IRAN) [Volume 14, Issue 3, 2023, Pages 973-980]
Arian, Mehran
Outlining of High-quality Parts of Coal by Concentration–Volume Fractal Model in North Kochakali Coal Deposit, Central Iran [Volume 15, Issue 2, 2024, Pages 557-579]
Ariffin, Kamar shah bin
Evaluating Microscale Failure Response of Various Weathering Grade Sandstones Based on Micro-Scale Observation and Micro-Structural Modelling Subjected to Wet and Dry Cycles [Volume 13, Issue 2, 2022, Pages 341-355]
Ariffin, K. S. bin
Application of Stochastic Simulation in Assessing Effect of Particle Morphology on Fracture Characteristics of Sandstone [Volume 12, Issue 4, 2021, Pages 969-986]
Ariffin, K.S.
A Preliminary Assessment of Rock Slope Stability in Tropical Climates: A Case Study at Lafarge Quarry, Perak, Malaysia [Volume 11, Issue 3, 2020, Pages 661-673]
Ariffin, K. Sh. Bin
Monte Carlo Simulation-Based Uncertainty Integration into Rock Particle Shape Descriptor Distributions [Volume 12, Issue 2, 2021, Pages 299-311]
Arjmand, R.
Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]
Aryafar, A.
Local multivariate outliers as geochemical anomaly halos indicators, a case study: Hamich area, Southern Khorasan, Iran [Volume 8, Issue 2, 2017, Pages 179-189]
Aryafar, A.
Application of continuous restricted Boltzmann machine to detect multivariate anomalies from stream sediment geochemical data, Korit, East of Iran [Volume 8, Issue 4, 2017, Pages 673-682]
Aryafar, A.
Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]
Aryafar, A.
Cadmium Oxide Nanoparticles as A Novel Photo-Catalyst for Degradation of Ciprofloxacin Antibiotic in Aqueous Media [Volume 13, Issue 1, 2022, Pages 155-164]
Aryanmehr, H.
Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]
Asadi Haroni, H.
Prediction of mineral deposit model and identification of mineralization trend in depth using frequency domain of surface geochemical data in Dalli Cu-Au porphyry deposit [Volume 6, Issue 2, 2015, Pages 225-236]
Asadizadeh, M.
Predicting Unconfined Compressive Strength of Intact Rock Using New Hybrid Intelligent Models [Volume 11, Issue 1, 2020, Pages 231-246]
Asadollahfardi, Gh.R.
A Proposed Biochemical Protocol to Isolate and Characterize Acidophilic Bacteria from Tailings Soil [Volume 11, Issue 4, 2020, Pages 1157-1171]
Asare, Joshua
Numerical Study of Behavior of Eccentric-inclined Loaded Strip Footing Resting above a Soil Mass Containing a Void [Volume 14, Issue 3, 2023, Pages 909-927]
Asgari, A.
Stability Analysis of Salt Cavern Gas Storage Using 2D Thermo-Hydro-Mechanical Finite-Element Software [Volume 11, Issue 1, 2020, Pages 77-97]
Asgari, K.
Study of Rock Pillar Failure Consisting of Non-Persistent Joint using Experimental Test and Fracture Analysis Code in Two Dimensions [Volume 12, Issue 1, 2021, Pages 163-179]
Asgari, K.
Interaction between Tunnel and Surface Foundation using PFC2D [Volume 12, Issue 3, 2021, Pages 785-798]
Asgari, K.
Effect of Confining Pressure on Is(50) Obtained by Point Load Test [Volume 12, Issue 4, 2021, Pages 1019-1028]
Asgari, K.
Influence of Single Tunnel and Twin Tunnel on Collapse Pattern and Maximum Ground Movement [Volume 13, Issue 1, 2022, Pages 117-128]
Asgari, K.
Interaction between One Internal Hole and Two Neighboring Joints under Uniaxial Compression using an Experimental Test and a Numerical Simulation [Volume 13, Issue 2, 2022, Pages 407-420]
Asgari Nezhad, Y.
Facies Quality Zoning in Shale Gas by Deep Learning Method [Volume 12, Issue 1, 2021, Pages 271-280]
Asghari, H.
Using Trifolium Alexanderium for Phytoremediation of some heavy metals in tailings dam in Anjir-Tange coal washing plant, Mazandaran, Iran [Volume 6, Issue 2, 2015, Pages 141-150]
Asghari, O.
On the reduction of the ordinary kriging smoothing effect [Volume 2, Issue 2, 2011, Pages 102-117]
Asghari, O.
Estimation of groundwater inflow situation using fuzzy logic: a case study (Beheshtabad water conveying tunnel, Iran) [Volume 7, Issue 2, 2016, Pages 229-238]
Asghari, O.
Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]
Asghari, O.
Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]
Asghari, O.
Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]
Asghari, O.
Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]
Asghari, O.
An Optimum Selection of Simulated Geological Models by Multi-Point Geostatistics and Multi-Criteria Decision-Making Approaches; a Case Study in Sungun Porphyry-Cu deposit, Iran [Volume 11, Issue 2, 2020, Pages 481-503]
Asghari, O.
Adaptive Multi-Size Block Modeling for Mineral Resources and Ore Reserves Evaluation [Volume 12, Issue 2, 2021, Pages 339-350]
Asghari, Omid
Geostatistical simulation of dyke systems in Sungun porphyry copper deposit, Iran [Volume 6, Issue 1, 2015, Pages 1-10]
Ashoogh, Masoud
Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]
Ashoor, Fatemeh
Block Toppling Stability of Rock Block with Rounded Edges using Sarma Approach [Volume 14, Issue 1, 2023, Pages 341-353]
Ashtari, Pedram
A Hybrid Model for Back-Break Prediction using XGBoost Machine learning and Metaheuristic Algorithms in Chadormalu Iron Mine [Volume 14, Issue 2, 2023, Pages 689-712]
Ashtari, Pedram
Reductive leaching of pyrolusite using orange peel as a reducing agent [Volume 14, Issue 4, 2023, Pages 1307-1319]
Askarbioki, M. H.
Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]
Aslani, S.
Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district [Volume 6, Issue 2, 2015, Pages 237-249]
Aslani, Soheila
A developed approach based on grinding time to determine ore comminution properties [Volume 4, Issue 2, 2013, Pages 105-112]
Assi, H.
Dimensionality analysis of subsurface structures in magnetotellurics using different methods (a case study: oil field in Southwest of Iran) [Volume 7, Issue 1, 2016, Pages 119-126]
Ataee-pour, M.
Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]
Ataee-pour, M.
A New Mathematical Model for Production Scheduling in Sub-level Caving Mining Method [Volume 11, Issue 3, 2020, Pages 765-778]
Ataee-pour, M.
Evaluation of Underground Mineable Reserve in Presence of Grade and Commodity Price Uncertainties [Volume 12, Issue 2, 2021, Pages 385-396]
Ataee-pour, M.
CFD Modeling of Impact of Gas Content Uncertainty on Methane Distribution in Underground Coal Mine Roadways [Volume 13, Issue 2, 2022, Pages 493-502]
Ataei, M.
Application of Schmidt rebound number for estimating rock strength under specific geological conditions [Volume 1, Number 2, 2010]
Ataei, M.
The use of analytic hierarchy process in the selection of suitable excavation machine for Dez - Qomroud water conveyance tunnel (lot 1&2), Iran [Volume 2, Issue 1, 2011]
Ataei, M.
Selection of the best strategy for Iran's quarries: SWOT-FAHP method [Volume 3, Issue 1, 2012, Pages 1-13]
Ataei, M.
Comparison of golden section search method and imperialist competitive algorithm for optimization cut-off grade- case study: Mine No. 1 of Golgohar [Volume 6, Issue 1, 2015, Pages 63-71]
Ataei, M.
Ranking sawability of dimension stone using PROMETHEE method [Volume 6, Issue 2, 2015, Pages 263-271]
Ataei, M.
Risk prediction based on a time series case study: Tazareh coal mine [Volume 7, Issue 1, 2016, Pages 127-134]
Ataei, M.
Semi-quantitative environmental impact assessment and sustainability level determination of coal mining using a mathematical model [Volume 7, Issue 2, 2016, Pages 185-193]
Ataei, M.
Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm [Volume 8, Issue 2, 2017, Pages 291-304]
Ataei, M.
Maintainability measure based on operating environment, a case study: Sungun copper mine [Volume 8, Issue 3, 2017, Pages 511-521]
Ataei, M.
A quantitative model for evaluation and classification of blastings in open-pit mines [Volume 9, Issue 1, 2018, Pages 127-141]
Ataei, M.
Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]
Ataei, M.
Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]
Ataei, M.
A practical approach to open-pit mine planning under price uncertainty using information gap decision theory [Volume 9, Issue 2, 2018, Pages 527-537]
Ataei, M.
Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]
Ataei, M.
Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]
Ataei, M.
A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]
Ataei, M.
Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]
Ataei, M.
Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]
Ataei, M.
Studying Relationship between Coal Intrinsic Characteristics in Spontaneous Combustion of Coal Potential Using Crossing Point Temperature Test Method [Volume 11, Issue 1, 2020, Pages 315-333]
Ataei, M.
Application of Sequential Gaussian Conditional Simulation to Underground Mine Design Under Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 695-709]
Ataei, M.
Dilution Risk Ranking in Underground Metal Mines using Multi-Attributive Approximation Area Comparison [Volume 11, Issue 4, 2020, Pages 977-989]
Ataei, M.
Risk assessment of Flyrock in Surface Mines using a FFTA-MCDM Combination [Volume 12, Issue 1, 2021, Pages 191-203]
Ataei, M.
Evaluation of Mine Reclamation Criteria using Delphi-Fuzzy Approach [Volume 12, Issue 2, 2021, Pages 367-384]
Ataei, M.
Quantifying Roof Falling Potential based on CMRR Method by Incorporating DEMATEL-MABAC Method; A Case Study [Volume 12, Issue 1, 2021, Pages 151-162]
Ataei, M.
Expected Proportional Hazard Model in Preventive Maintenance [Volume 12, Issue 3, 2021, Pages 753-767]
Ataei, M.
Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]
Ataei, Mohammad
Sustainability Analysis of Waste Dump in Mine No. 4 of Golgohar, Sirjan, for Purpose of Increasing Waste Dump Volume [Volume 14, Issue 4, 2023, Pages 1373-1391]
Ataei, Mohammad
Investigating Effect of Induced Stresses due to Coal Panel Extraction on Next Panel Strata behavior during Mechanized Longwall Mining: a Case Study [Volume 15, Issue 1, 2024, Pages 381-399]
Ataei, Mohammad
Multi-criteria Decision-making Methods for Sustainable Decision-making in the Mining Industry (A Comprehensive Study) [Volume 15, Issue 2, 2024, Pages 683-706]
Ataie, Mohammad
A laboratory study of rock properties affecting the penetration rate of pneumatic top hammer drills [Volume 5, Issue 1, 2014, Pages 25-34]
Atef, Abdallah
A Predictive GIS Model for Mapping Gold and Copper-bearing Alteration zones at South Gabal Um Monqul and Gabal Al Kharaza Prospects, North Eastern Desert, Egypt [Volume 14, Issue 4, 2023, Pages 1239-1260]
Atkins, A.S.
Determination of ground water quality associated with lignite mining in arid climate [Volume 1, Number 1, 2010]
Atrafi, A
Implementation of flotation and gravity separation, to process Changarzeh sulfide-oxide lead ore [Volume 3, Issue 2, 2012, Pages 79-87]
Attia, Osama E.A.
Geological Mapping and Facies Characterization of Miocene Evaporites along Central-eastern Margin of Gulf of Suez Rift by Remote Sensing Techniques [Volume 15, Issue 1, 2024, Pages 151-173]
Aubynn, A.
Operational dynamics of “Galamsey” within eleven selected districts of western region of Ghana [Volume 8, Issue 1, 2017, Pages 11-34]
Avendaño, Eslainer
ASSESSING THE OPERATIONAL DAMAGE IMPACT ON MINING TIRES (CASE STUDY) [(Articles in Press)]
Ayad, Abderrahim
Economic impact of derangements on mining process – Case study: Sidi Chennane [Volume 13, Issue 4, 2022, Pages 989-996]
Azad, M. R.
Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]
Azadi, M.
Stable Downward Continuation of Airborne Potential Field Geophysical Data: an Investigation of Stabilizer Family [Volume 12, Issue 2, 2021, Pages 547-567]
Azadi, M. R.
Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]
Azadmehr, A. R.
Field study on Re and heavy metal phytoextraction and phytomining potentials by native plant species growing at Sarcheshmeh copper mine tailings, SE Iran [Volume 9, Issue 1, 2018, Pages 183-194]
Azadmehr, A. R.
Comparative and Competitive Study of LDH/Diatomite and Chitosan/Diatomite for Adsorptive Removal of Chloride Ion from Aqueous Solution [Volume 11, Issue 1, 2020, Pages 261-279]
Azadmehr, A.R.
Phytoextraction-based process of metal absorption from soil in mining areas (tailing dams) by Medicago sativa L. (Alfalfa) (Case study: Sarcheshmeh porphyry copper mine, SE of Iran) [Volume 8, Issue 3, 2017, Pages 419-431]
Azarfar, A.
Improvement of coal mine roof rating classification using fuzzy type-2 [Volume 9, Issue 3, 2018, Pages 691-701]
Azer, Mokhles K.
A Predictive GIS Model for Mapping Gold and Copper-bearing Alteration zones at South Gabal Um Monqul and Gabal Al Kharaza Prospects, North Eastern Desert, Egypt [Volume 14, Issue 4, 2023, Pages 1239-1260]
Azer, Mokles Kamal
Integration of Landsat-8 and Reflectance Spectroscopy data for Mapping of Late Neoproterozoic Igneous Ring Complexes in an Arid Environment: a Case Study of Gebel El-Bakriyah Area, Eastern Desert, Egypt [Volume 14, Issue 1, 2023, Pages 13-31]
Azghadi, M.
Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]
Azimi, A.
Application of stochastic programming for iron ore quality control [Volume 9, Issue 2, 2018, Pages 331-338]
Azinfar, Mohamad Javad
2D Simulation of Dynamic Transportation of Volatile Hydrocarbons in Vadose Zone of Tehran Oil Refinery and Industrial area of Ray, Tehran, Iran [Volume 13, Issue 3, 2022, Pages 809-820]
Aziz, N.
Effect of air column in transport canisters on measured gas contents of coal [Volume 8, Issue 1, 2017, Pages 1-9]
Aziz, N.
An experimental study of axial load transfer mechanisms of cable bolts using axially split embedment apparatus [Volume 8, Issue 2, 2017, Pages 131-137]
Aziz, N.
Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]
Aziz, N. I.
Impacts of coal shrinkage, permeability and petrography on gas regime in mines Case study: Tahmoor coal mine, NSW, Australia [Volume 1, Number 1, 2010]
Azizi, A.
Investigation of leaching kinetics of zinc from a low-grade ore in organic and inorganic acids [Volume 8, Issue 4, 2017, Pages 579-591]
Azizi, A.
Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]
Azizi, A.
Solvent extraction of copper from an industrial sulfate liquor using Chemorex CP-150 [Volume 9, Issue 4, 2018, Pages 905-916]
Azizi, Asghar
Influence of operating parameters on the Apatite flotation kinetics [Volume 4, Issue 1, 2013, Pages 45-55]
Azizi, Asghar
Extracting alumina from a low-grade (shale) bauxite ore using a sintering process with lime-soda followed by alkali leaching [(Articles in Press)]
Azizi, Dariush
A developed approach based on grinding time to determine ore comminution properties [Volume 4, Issue 2, 2013, Pages 105-112]
Azizi, H.
A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]
Azizi, H.
Bayesian Data Fusion: a Reliable Approach for Descriptive Modeling of Ore Deposits [Volume 11, Issue 1, 2020, Pages 63-76]
Azmi, H.
Geostatistical estimation to delineate oxide and sulfide zones using geophysical data; a case study of Chahar Bakhshi vein-type gold deposit, NE Iran [Volume 10, Issue 3, 2019, Pages 679-694]
B
Babaei, M.
Geostatistical Modeling of Electrical Resistivity Tomography for Imaging Porphyry Cu Mineralization in Takht-e-Gonbad Deposit, Iran [Volume 11, Issue 1, 2020, Pages 143-159]
Babaei, M. J.
Estimating the function of copper consumption in Iran between 1991- 2011 using Johansen model [Volume 6, Issue 2, 2015, Pages 183-189]
Babaeian, M.
Quantifying Roof Falling Potential based on CMRR Method by Incorporating DEMATEL-MABAC Method; A Case Study [Volume 12, Issue 1, 2021, Pages 151-162]
Babajić, E.
Gold, Silver and Iron in Iron Oxy-hydroxide Precipitate Formed in Process of Acid Mine Drainage [Volume 11, Issue 2, 2020, Pages 335-346]
Babakan, S.
Role of smile correction in mineral detection on hyperion data [Volume 7, Issue 2, 2016, Pages 261-272]
Babanouri, N.
Predicting tensile strength of rocks from physical properties based on support vector regression optimized by cultural algorithm [Volume 8, Issue 3, 2017, Pages 467-474]
Babanouri, N.
A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]
Babanouri, Nima
Investigation of Fracture Toughness of Shotcrete using Semi-Circular Bend Test and Notched Brazilian Disc test; Experimental Test and Numerical Approach [Volume 14, Issue 1, 2023, Pages 233-242]
Babanouri, Nima
Investigation of External Work, Fracture Energy, and Fracture Toughness of Oil Well Cement Sheath using HCCD Test and CSTBD Test [Volume 14, Issue 2, 2023, Pages 619-634]
Babanouri, Nima
Failure Mechanism of Rock Pillar Containing Two Edge Notches: Experimental Test and Numerical Simulation [Volume 14, Issue 3, 2023, Pages 961-971]
Babu, T S Ramesh
Impact on Mechanical and Durable Properties of Rubber and Copper Slag-based Geo-polymer Mortar using Various Sodium Hydroxide Molarities and Proportions of Alkali Activator Solutions [Volume 14, Issue 3, 2023, Pages 853-870]
Bacha, Sh.
A review of Rock Burst’s Experimental Progress, Warning, Prediction, Control and Damage Potential Measures [Volume 11, Issue 1, 2020, Pages 31-48]
Bacha, Sh.
A Stochastic Model Upgrading Gold Content in Cyanide Leaching using Monte Carlo Simulation [Volume 12, Issue 3, 2021, Pages 619-631]
Bacha, Sh.
Optimization of Process Parameters for Enhanced Up-gradation of Qilla Saifullah Copper ore through Froth Floatation Technique [Volume 12, Issue 3, 2021, Pages 633-649]
Badri, M.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Badv, Kazem
Cyanide Removal from Tailing Slurry of Gold Processing Plant using Surfactant-modified Zeolite [Volume 15, Issue 1, 2024, Pages 285-300]
Baghbanan, A.
Extended finite element simulation of crack propagation in cracked Brazilian disc [Volume 6, Issue 1, 2015, Pages 95-102]
Baghban Golpasand, Mohammad-Reza
Urban Tunneling Risk Management: Ground Settlement Assessment through Proportional Hazards Modeling [(Articles in Press)]
Bagheri, Fereshteh
PFC Simulation of Brazilian Tensile Strength Test in Geomaterials’ Specimens with T-shaped Non-persistent Joints [Volume 13, Issue 4, 2022, Pages 1189-1209]
Baghernia, Kh.
Calculation of Optimum Soil Conditioning in EPB Tunneling (Case Study: Ahwaz Metro Project, Line 1) [Volume 12, Issue 2, 2021, Pages 501-513]
Bagherpour, R.
Study of Effect of Cooling/Lubricating Fluids, Machining Parameters, and Rock Mechanical Properties on Penetration Rate in Rock Drilling Process [Volume 12, Issue 3, 2021, Pages 825-843]
Bagherpour, Raheb
Studying Effects of Cooling/Lubricating Fluids, Machining Parameters, and Rock Mechanical Properties on Specific Energy in Rock Drilling Process [Volume 15, Issue 2, 2024, Pages 613-636]
Baghzendani, H.R
Subsurface modeling of mud volcanoes, using density model and analysis of seismic velocity [Volume 6, Issue 1, 2015, Pages 31-39]
Bahaaddini, HamidReza
Prediction of the deformation modulus of rock masses using Artificial Neural Networks and Regression methods [Volume 4, Issue 1, 2013, Pages 35-43]
Bahaaddini, M.
Optimal Earthmoving Fleet Size for Minimising Emissions and Cost [Volume 11, Issue 4, 2020, Pages 949-965]
Bahaaddini, M.
Physical modelling of caving propagation process and damage profile ahead of the cave-back [Volume 11, Issue 4, 2020, Pages 1047-1058]
Bahaaddini, M.
Estimation of In-Situ Block Size Distribution in Jointed Rock Masses using Combined Photogrammetry and Discrete Fracture Network [Volume 13, Issue 1, 2022, Pages 175-184]
Bahaaddini, M.
Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]
Bahrami, A.
Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]
Bahrami, A.
Modeling of Induced Polarization and Resistivity Data for Prospecting and Exploration of Polymetallic Deposit in Kaboudan Area, East of Iran [Volume 12, Issue 3, 2021, Pages 693-710]
Bahrami, A.R.
Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods [Volume 13, Issue 1, 2022, Pages 269-280]
Bahrami, Ataallah
A Process Mineralogy Based Approach for Arsenic Removal from Copper Concentrate in Cu – Mo Flotation Circuit [Volume 14, Issue 3, 2023, Pages 929-944]
Bahrami, S.
Application of artificial neural network and genetic algorithm to modelling the groundwater inflow to an advancing open pit mine [Volume 6, Issue 1, 2015, Pages 21-30]
Bahrammanesh, M.
Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]
Bahri, E.
Mineral Potential Modeling of Porphyry Copper Deposits using Continuously-Weighted Spatial Evidence Layers and Union Score Integration Method [Volume 12, Issue 3, 2021, Pages 743-751]
Bahri, Z.
Processing of Alborz Markazi coal tailings using column flotation [Volume 2, Issue 1, 2011]
Bahroudi, A.
Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]
Bahroudi, A.
Investigating Alteration Zone Mapping Using EO-1 Hyperion Imagery and Airborne Geophysics Data [Volume 11, Issue 2, 2020, Pages 405-417]
Bakhshandeh Amnieh, H.
Numerical analysis of energy transmission through discontinuities and fillings in Kangir Dam [Volume 7, Issue 2, 2016, Pages 251-259]
Bakhshandeh Amnieh, H.
Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines [Volume 10, Issue 4, 2019, Pages 903-916]
Bakhshandeh Amnieh, H.
Determination of Caving Hydraulic Radius of Rock Mass in Block Caving Method using Numerical Modeling and Multivariate Regression [Volume 13, Issue 1, 2022, Pages 217-233]
Bakhshandeh Amnieh, H.
Cavability Assessment of Rock Mass in Block Caving Mining Method based on Numerical Simulation and Response Surface Methodology [Volume 13, Issue 2, 2022, Pages 579-606]
Bakhshandeh Amnieh, Hassan
Determination of the caving zone height using numerical and physical modeling based on the undercutting method, joint dip, and spacing [(Articles in Press)]
Bakhshi, E.
Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]
Bakhshi Mazdeh, M.
Heavy metal pollution and identification of their sources in soil over Sangan iron-mining region, NE Iran [Volume 8, Issue 2, 2017, Pages 277-289]
Bakhtavar, E.
Monitoring and assessment of pollutants resulting from bench-blasting operations [Volume 7, Issue 1, 2016, Pages 109-118]
Bakhtavar, E.
Optimal production strategy of bimetallic deposits under technical and economic uncertainties using stochastic chance-constrained programming [Volume 8, Issue 3, 2017, Pages 475-485]
Bakhtavar, E.
Design of Loading and Transportation Fleet in Open-Pit Mines using Simulation Approach and Metaheuristic Algorithms [Volume 12, Issue 4, 2021, Pages 1177-1188]
Bakhtiari, Mohammad Reza
Application of Artificial Neural Networks and Support Vector Machines for carbonate pores size estimation from 3D seismic data [Volume 4, Issue 1, 2013, Pages 1-14]
Bakkali, Saad
Economic impact of derangements on mining process – Case study: Sidi Chennane [Volume 13, Issue 4, 2022, Pages 989-996]
Balaraju, J.
Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]
Balesini, A.A.
Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]
Balusu, R.
Fundamental understanding of goaf gas displacement in longwall goaf [Volume 6, Issue 2, 2015, Pages 191-203]
Balusu, R.S.
Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution [Volume 9, Issue 3, 2018, Pages 547-557]
Bamidele, H A
Mine Geo-environment Assessment: Carbonate Rock Mine Waste as Construction Material Addictive and Coupled with Pollution Index Model [Volume 14, Issue 1, 2023, Pages 179-196]
Bangian Tabrizi, A. H.
Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]
Bangian Tabrizi, A. H.
A 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks [Volume 11, Issue 2, 2020, Pages 467-480]
Bangian Tabrizi, A.H.
A Comprehensive Study of Several Meta-Heuristic Algorithms for Open-Pit Mine Production Scheduling Problem Considering Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 721-736]
Banisi, S.
Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade [Volume 8, Issue 4, 2017, Pages 539-544]
Banisi, S.
Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]
Banisi, S.
Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]
Banisi, S.
Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]
Banisi, S.
Accuracy of Discrete Element Method Simulations: Rolling and Sliding Frictions Effects-Case study: Iron Ore Pellets [Volume 11, Issue 4, 2020, Pages 1205-1216]
Bansal, Vijay Kumar
Spatial Prediction of Landslide Hazard using GIS-multi-criteria Decision Analysis in Kullu District of Himachal Pradesh, India [Volume 13, Issue 4, 2022, Pages 943-956]
Barabadi, Abbas
Operating Environmental Condition Effect on Reliability-Centred Maintenance [Volume 14, Issue 2, 2023, Pages 667-688]
Barabadi, Abbas
Multi-criteria Decision-making Methods for Sustainable Decision-making in the Mining Industry (A Comprehensive Study) [Volume 15, Issue 2, 2024, Pages 683-706]
Barak, S.
Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]
Barak, Samaneh
Should Geochemical Indicators Be Integrated to Produce Enhanced Signatures of Mineral Deposits? A Discussion with Regard to Exploration Scale [Volume 14, Issue 3, 2023, Pages 1011-1018]
Barak, Samaneh
Application of Fuzzy Gamma Operator for Mineral Prospectivity Mapping, Case Study: Sonajil Area [Volume 14, Issue 3, 2023, Pages 981-997]
Barani, K.
Production of artificial stone slabs using waste granite and marble stone sludge samples [Volume 7, Issue 1, 2016, Pages 135-141]
Barani, K.
Application of perfect mixing model for simulation of vertical roller mills [Volume 8, Issue 4, 2017, Pages 545-553]
Barani, K.
Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]
Barri, Faezeh
The effect of soil and grout mixture on the ground surface settlement in mechanized excavation [(Articles in Press)]
Barzegar, N.
First Finding of Satin Spar Gemstone in Iran, Folded Zagros Zone, Fars Region [Volume 11, Issue 4, 2020, Pages 1039-1046]
Bascompta, M.
Developing New Models for Flyrock Distance Assessment in Open-Pit Mines [Volume 13, Issue 2, 2022, Pages 375-389]
Bascompta, M.
Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]
Bashari, Ali
Support Analysis of Main Tunnels in Tabas Mechanized Parvadeh Mine at Intersection with Coal Seam [Volume 12, Issue 3, 2021, Pages 711-724]
Bashir, Mounius
Behavior of Horizontally Reinforced Stone Column in a Layered Soil: Enhancing Ground Improvement [Volume 15, Issue 2, 2024, Pages 537-555]
Basiri, M.H.
Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]
Basirifar, F.
Prediction of effect of fine particle removal on efficiency of a spiral circuit by size-by-size partition curves [Volume 8, Issue 4, 2017, Pages 567-571]
Başpınar Tuncay, E.
A Probability-Based Evaluation on Andesites for Their Use as Cladding Stone [Volume 13, Issue 1, 2022, Pages 1-13]
Bastami, R.
Prediction of Blasting Cost in Limestone Mines Using Gene Expression Programming Model and Artificial Neural Networks [Volume 11, Issue 1, 2020, Pages 281-300]
Basu, Debasmita
A Comprehensive Literature Review Approach for Assessing Probable Impact of Post-reclamation Strategies Applied to Abandoned Mines [Volume 14, Issue 3, 2023, Pages 871-896]
Basu, Debasmita
Review of mining tourism and destination image positioning – Case study: India [Volume 14, Issue 4, 2023, Pages 1081-1104]
Batmunkh, B.
Measurement, Prediction, and Modeling of Bit Wear During Drilling Operations [Volume 12, Issue 1, 2021, Pages 15-30]
Bavand Savadkoohi, M.
A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]
Bayatzadeh Fard, Z.
Use of artificial intelligence techniques to predict distribution of heavy metals in groundwater of Lakan lead-zinc mine in Iran [Volume 8, Issue 1, 2017, Pages 35-48]
Bazargani Golshan, Mojtaba
Outlining of High-quality Parts of Coal by Concentration–Volume Fractal Model in North Kochakali Coal Deposit, Central Iran [Volume 15, Issue 2, 2024, Pages 557-579]
Behnamfard, A.
Beneficiation of a low-grade iron ore by combination of wet low-intensity magnetic separation and reverse flotation methods [Volume 10, Issue 1, 2019, Pages 197-212]
Behnamfard, A.
Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]
Behnia, M.
On the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method [Volume 2, Issue 1, 2011]
Bejari, H.
Selection of chromite processing plant site using fuzzy analytic hierarchy process (FAHP) [Volume 8, Issue 2, 2017, Pages 155-162]
Bejari, Hadi
An Experimental Study on Water Saturation Effect on Rock Cutting Force of a Chisel Pick [Volume 14, Issue 2, 2023, Pages 577-600]
Bello-Teodoro, S.
Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]
Bempah, C.
Impact of mining on groundwater quality in SW Ashanti, Ghana: a preliminary study [Volume 7, Issue 1, 2016, Pages 81-95]
Benoune, Khadidja
Influence of Red Clay Minerals on Lead-induced Liver and Testicular Oxidative Stress and Histological Alteration in Rats [Volume 14, Issue 1, 2023, Pages 1-11]
Benzakour, I.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Berber, Samet
Soil liquefaction susceptibility of Akcay residential area (Biga Peninsula, Turkey) close to North Anatolian Fault Zone [Volume 14, Issue 4, 2023, Pages 1141-1153]
Berhe, G.G.
Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]
Bhagat, Monu
A Deep Neural Network for Classification of Land Use Satellite Datasets in Mining Environments [Volume 13, Issue 3, 2022, Pages 797-808]
Bhagat, N.K
Magnitude of vibration triggering component determines safety of structures [Volume 5, Issue 1, 2014, Pages 35-46]
Bhardwaj, Ajay
Stability Analysis and Construction of Highest Gabion Wall of its own Kind in India - a Case Study [Volume 15, Issue 1, 2024, Pages 191-202]
Bhardwaj, Avinash
Stability Analysis and Construction of Highest Gabion Wall of its own Kind in India - a Case Study [Volume 15, Issue 1, 2024, Pages 191-202]
Bhardwaj, Vanshika
Landslide Susceptibility Assessment using Remote Sensing and GIS-a Review [Volume 14, Issue 1, 2023, Pages 133-154]
Bichewar, Namrata
Stability Analysis and Construction of Highest Gabion Wall of its own Kind in India - a Case Study [Volume 15, Issue 1, 2024, Pages 191-202]
Bima, Bima
The Impact of Mine Opening Expansion on Slope Stability: A Case Study in North Konawe, Southeast Sulawesi Province, Indonesia [(Articles in Press)]
Bizhani, H.
An Exploration Model for A Gold Deposit in Kervian Area, Kurdistan Province, Iran, using a Combination of Geophysical Results with Geological Information and Other Exploratory Data [Volume 12, Issue 2, 2021, Pages 413-424]
Bogale, T.
Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]
Borg, G.
Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]
Bour, K.
Study of convergence confinement method curves considering pore-pressure effect [Volume 10, Issue 2, 2019, Pages 479-492]
Boussetta, A.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Bowa, V. Mwango
Wedge Failure Analysis of the Slope Subjected to Uplift Forces by Analytical Method at Chingola Open Pits F & D [Volume 12, Issue 4, 2021, Pages 941-952]
Bozorgi, E.
Development of a mechanical earth model in an Iranian off-shore gas field [Volume 7, Issue 1, 2016, Pages 37-46]
Brouard, B.
Stability Analysis of Salt Cavern Gas Storage Using 2D Thermo-Hydro-Mechanical Finite-Element Software [Volume 11, Issue 1, 2020, Pages 77-97]
Bulut, G.
Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash [Volume 9, Issue 2, 2018, Pages 319-330]
Burak Küçüksütçü, C.
A New Stability Approach using Probabilistic Profile along Direction of Excavation [Volume 11, Issue 1, 2020, Pages 1-20]
Burdeina, Nataliia
Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]
Butt, S. D.
Feasibility study of underground salt caverns in Western Newfoundland: experimental and finite element investigation of creep-induced damage [Volume 6, Issue 2, 2015, Pages 205-224]
C
Capik, M.
Measurement, Prediction, and Modeling of Bit Wear During Drilling Operations [Volume 12, Issue 1, 2021, Pages 15-30]
Careddu, N.
Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]
Careddu, Nicola
An Experimental-Intelligent Method to Predict Noise Value of Drilling in Dimension Stone Industry [Volume 13, Issue 3, 2022, Pages 693-713]
Cavusoglu, Ibrahim
Evaluation of Pozzolanic Activity of Two Different Types of C and F Fly Ashes with Fineness Factor [Volume 14, Issue 2, 2023, Pages 435-448]
Celik, T.
A Comparative Study on Machine Learning Algorithms for Geochemical Prediction Using Sentinel-2 Reflectance Spectroscopy [Volume 12, Issue 4, 2021, Pages 987-1001]
Ceryan, Nurcihan
Soil liquefaction susceptibility of Akcay residential area (Biga Peninsula, Turkey) close to North Anatolian Fault Zone [Volume 14, Issue 4, 2023, Pages 1141-1153]
Ceryan, Şener
Soil liquefaction susceptibility of Akcay residential area (Biga Peninsula, Turkey) close to North Anatolian Fault Zone [Volume 14, Issue 4, 2023, Pages 1141-1153]
Chaib, R.
A Safe and Sustainable Development in a Hygiene and Healthy Company Using Decision Matrix Risk Assessment Technique: a case study [Volume 11, Issue 2, 2020, Pages 363-373]
Chakeri, H.
A 3D Finite-Difference Analysis of Interaction between a Newly-Driven Large Tunnel with Twin Tunnels in Urban Areas [Volume 11, Issue 3, 2020, Pages 809-823]
Chakeri, Hamid
Investigating Effect of Soil Grading Parameters on Tool Wear in Mechanized Tunneling using EPB-TBM Machine [Volume 15, Issue 1, 2024, Pages 301-321]
Chakeri, Hamid
Cutting Tools Wear in Soft Ground Tunneling: Field and Experimental Insights [(Articles in Press)]
Chakeri, Hamid
The effect of soil and grout mixture on the ground surface settlement in mechanized excavation [(Articles in Press)]
Chamani, A
Wellbore associated problems due to gas injection into non-horizontal structures [Volume 3, Issue 2, 2012, Pages 113-119]
Chamanzad, M.A.
Sensitivity Analysis of Stress and Cracking in Rock Mass Blasting using Numerical Modelling [Volume 11, Issue 4, 2020, Pages 1141-1155]
Chand, Kapoor
Internal Mine Dump Slope Stability and Failure Zone Identification using 3D Modelling [Volume 14, Issue 4, 2023, Pages 1105-1119]
Chandan, Avinash
Sub-grade Characteristics of Flexible Pavements Incorporating Shredded Face Mask in Clayey Soil [Volume 14, Issue 3, 2023, Pages 789-797]
Chandel, Naman
Ground Water Quality Analysis using Machine Learning Techniques: a Critical Appraisal [Volume 15, Issue 2, 2024, Pages 419-426]
Chaudhari, Sumit kumar
Detection of Surface and Sub-surface Coal Mine Fire of Jharia Coalfields using Remotely Sensed and Ground Thermal Data [Volume 15, Issue 1, 2024, Pages 1-19]
Cheraghi Seifabad, M.
Study of Effect of Cooling/Lubricating Fluids, Machining Parameters, and Rock Mechanical Properties on Penetration Rate in Rock Drilling Process [Volume 12, Issue 3, 2021, Pages 825-843]
Cheraghi Seifabad, Masoud
Studying Effects of Cooling/Lubricating Fluids, Machining Parameters, and Rock Mechanical Properties on Specific Energy in Rock Drilling Process [Volume 15, Issue 2, 2024, Pages 613-636]
Chiles, Jean-Paul
Modelling of the kaolin deposits and reserve classification challenges of Charentes Basin, France [Volume 1, Number 1, 2010]
Chinaei, Farhad
Prediction of Roof Failure in Pre-driven Entries and Selecting a Suitable Type of Recovery Room Method in Longwall Mining [Volume 15, Issue 1, 2024, Pages 223-237]
Chinyanta, S.
Wedge Failure Analysis of the Slope Subjected to Uplift Forces by Analytical Method at Chingola Open Pits F & D [Volume 12, Issue 4, 2021, Pages 941-952]
Choudary, Yeluri Sesha
Impact on Mechanical and Durable Properties of Rubber and Copper Slag-based Geo-polymer Mortar using Various Sodium Hydroxide Molarities and Proportions of Alkali Activator Solutions [Volume 14, Issue 3, 2023, Pages 853-870]
Choudhary, B. Singh
A Comparative Study of Machine Learning Methods for Prediction of Blast-Induced Ground Vibration [Volume 12, Issue 3, 2021, Pages 667-677]
Cotrina Teatino, Marco Antonio
Copper ore grade prediction using Machine Learning techniques in a copper deposit [(Articles in Press)]
Crotogino, F
Development of a new creep testing equipment to obtain long-term deformation parameters of salt rocks [Volume 3, Issue 1, 2012, Pages 27-32]
Cruz Pestana, R.
An improvement in RTM method to image steep dip petroleum bearing structures and its superiority to other methods [Volume 8, Issue 4, 2017, Pages 573-578]
D
D, Natarajan
Metal extraction competence of plants on waste dumps of magnesite mine, Salem District, South India [Volume 4, Issue 2, 2013, Pages 113-124]
Dabiri, R.
Geochemical and environmental assessment of heavy metals in soils and sediments of Forumad Chromite mine, NE of Iran [Volume 6, Issue 2, 2015, Pages 251-261]
Dabiri, R.
Heavy metal pollution and identification of their sources in soil over Sangan iron-mining region, NE Iran [Volume 8, Issue 2, 2017, Pages 277-289]
Dabiri, R.
Evaluating performance of natural sepiolite and zeolite nanoparticles for nickel, antimony, and arsenic removal from synthetic wastewater [Volume 9, Issue 4, 2018, Pages 1049-1064]
Dachri, K.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Dacosta, Francis Amphose
A Rule-based Expert System for Selection of Rehabilitation Strategies for Abandoned Mines in South Africa [Volume 14, Issue 4, 2023, Pages 1171-1181]
Dadashi, E.
An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]
Dadi-givshad, A.
Study of Damaged Zone around Circular Opening Using Acoustic Emission Technique [Volume 11, Issue 2, 2020, Pages 433-451]
Dadkhah Tehrani, Ali
Design, Manufacture, and Perform of First Electronic Seismic Sensor Dilatometer in Project of Tehran Metro line 6 as a Rapid Environmentally Friendly in-situ Test with Less Soil Disturbance [Volume 13, Issue 4, 2022, Pages 1107-1118]
Dahrazma, B.
Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]
Daneshvar Saein, L.
Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]
Daneshvar Saein, L.
Recognition of Gold Mineralization Potentials Based on Rock Samples Utilizing Staged Factor and Fractal Models, Bardaskan District (NE Iran) [Volume 12, Issue 4, 2021, Pages 1077-1088]
Daneshvar Saein, Lili
Outlining of High-quality Parts of Coal by Concentration–Volume Fractal Model in North Kochakali Coal Deposit, Central Iran [Volume 15, Issue 2, 2024, Pages 557-579]
Dao, H.
Study on an Online Vibration Measurement System for Seismic Waves Caused by Blasting for Mining in Vietnam [Volume 12, Issue 2, 2021, Pages 313-325]
Daramola, Sunday Olabisi
Geotechnical Evaluation of Mine Wastes for Utilization in Embarkment Construction in Jos, Central Nigeria [Volume 15, Issue 2, 2024, Pages 427-438]
Darban, Ahmad
Prediction of recovery of gold thiosulfate on activated carbon using artificial neural networks [Volume 5, Issue 1, 2014, Pages 55-66]
Darbani, H.
A three dimensional geometrical model for calculation of induced stresses surrounding longwall working [Volume 9, Issue 3, 2018, Pages 727-740]
Darbor, Mohammad
Investigating Effect of Soil Grading Parameters on Tool Wear in Mechanized Tunneling using EPB-TBM Machine [Volume 15, Issue 1, 2024, Pages 301-321]
Darbor, Mohammad
The effect of soil and grout mixture on the ground surface settlement in mechanized excavation [(Articles in Press)]
Darvishi, Mohammad Amin
Alumina Extraction by Lime-soda Sinter Process from Low-grade Bauxite Soil of Semirom Mine [Volume 13, Issue 4, 2022, Pages 1159-1169]
DarvishTafvisi, S.
Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade [Volume 8, Issue 4, 2017, Pages 539-544]
Darwish, Yehia
Predicting Gabal Gattar Uranium Content as a Function of Total Gamma-ray and Thorium Contents using an Artificial Neural Network in Northeastern Desert, Egypt [Volume 15, Issue 1, 2024, Pages 175-189]
Daya, A. A.
Selection of chromite processing plant site using fuzzy analytic hierarchy process (FAHP) [Volume 8, Issue 2, 2017, Pages 155-162]
Deepthi, Garikapati
Impact on Mechanical and Durable Properties of Rubber and Copper Slag-based Geo-polymer Mortar using Various Sodium Hydroxide Molarities and Proportions of Alkali Activator Solutions [Volume 14, Issue 3, 2023, Pages 853-870]
Dehgani, E.
Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]
Dehghan, R.
Use of density tracers in evaluating performance of Tri-Flo circuits Case study: Tabas (Iran) coal preparation plant [Volume 10, Issue 2, 2019, Pages 441-450]
Dehghani, A.
Estimating the function of copper consumption in Iran between 1991- 2011 using Johansen model [Volume 6, Issue 2, 2015, Pages 183-189]
Dehghani, Ali
Influence of operating parameters on the Apatite flotation kinetics [Volume 4, Issue 1, 2013, Pages 45-55]
Dehghani, H.
Estimation of penetration rate of tunnel boring machines using Monte-Carlo simulation method [Volume 7, Issue 2, 2016, Pages 175-184]
Dehghani, H.
A new model for mining method selection based on grey and TODIM methods [Volume 8, Issue 1, 2017, Pages 49-60]
Dehghani, H.
Forecasting copper price using gene expression programming [Volume 9, Issue 2, 2018, Pages 349-360]
Dehghani, H.
Prediction of Acid Mine Drainage Generation Potential of A Copper Mine Tailings Using Gene Expression Programming-A Case Study [Volume 11, Issue 4, 2020, Pages 1127-1140]
Dehghani, H.
Design of Loading and Transportation Fleet in Open-Pit Mines using Simulation Approach and Metaheuristic Algorithms [Volume 12, Issue 4, 2021, Pages 1177-1188]
Dehghani, H.
Developing New Models for Flyrock Distance Assessment in Open-Pit Mines [Volume 13, Issue 2, 2022, Pages 375-389]
Dehghani, H.
Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]
Dehghani, Hamid
Enhancing magnetic signals in unexploded ordnances (UXO) detection based on edge-preserved stable downward continuation method [Volume 5, Issue 1, 2014, Pages 13-24]
Dehghani, Hamid
AN-EUL method for automatic interpretation of potential field data in unexploded ordnances (UXO) detection [Volume 5, Issue 2, 2014, Pages 67-77]
Dehghani, Hesam
Reliability-based maintenance scheduling of powered supports in Tabas mechanized coal mine [Volume 5, Issue 2, 2014, Pages 113-120]
Dehghani, Hesam
A Hybrid Model for Back-Break Prediction using XGBoost Machine learning and Metaheuristic Algorithms in Chadormalu Iron Mine [Volume 14, Issue 2, 2023, Pages 689-712]
Dehghani Firoozabadi, Mohammadhosein
Simulation of Crack Propagation Mechanism in Porous Media using Modified linear Element Displacement Discontinuity Method [Volume 13, Issue 3, 2022, Pages 903-927]
Dehghani Firoozabadi, Mohammadhossein
Analytical Solutions of First-order Displacement Discontinuity Elements in Poroelasticity [Volume 14, Issue 2, 2023, Pages 601-618]
Dehvedar, M.
Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]
Demir Sahin, Demet
Evaluation of Pozzolanic Activity of Two Different Types of C and F Fly Ashes with Fineness Factor [Volume 14, Issue 2, 2023, Pages 435-448]
Derdour, Fatima.Z
Statistical Analysis and Optimization of Drilling Process using Response Surface Methodology and Experimental Data [Volume 15, Issue 1, 2024, Pages 55-71]
Derouiche, Samir
Influence of Red Clay Minerals on Lead-induced Liver and Testicular Oxidative Stress and Histological Alteration in Rats [Volume 14, Issue 1, 2023, Pages 1-11]
Despodov, Z.
Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]
Dezhpasand, S.
Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method [Volume 8, Issue 1, 2017, Pages 103-110]
Dhakal, Devraj
Applications of GIS and Remote Sensing in Highway Project: a Review [Volume 14, Issue 2, 2023, Pages 375-388]
Dharmendra, Dr
Seasonal Variation in Physico-chemical Characteristics of Domestic Wastewater in Himachal Pradesh: a Case Study [Volume 14, Issue 3, 2023, Pages 771-787]
Diab, M.
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Dilta, Lokeshwar Singh
Numerical Analysis of Strip Footing Behaviour on a Hollow Pile Stabilized Clay Slope [Volume 14, Issue 3, 2023, Pages 799-811]
Dolatshahi, Alireza
Pre-existing Crack Effect on Damage of Inner Concrete Lining under an Internal Explosion: A Numerical Study [Volume 14, Issue 3, 2023, Pages 945-960]
Dolatshahi, Alireza
Effect of Acidic Water on Physico-Mechanical Properties of Concrete Containing Micro-Silica [Volume 14, Issue 2, 2023, Pages 653-666]
Dolatshahi, Alireza
Specimens Size Effect on Mechanical and Fracture Properties of Rocks: a Review [Volume 14, Issue 4, 2023, Pages 1273-1293]
Dolatshahi, A.R.
Effect of Acid Rain on Physical and Mechanical Properties of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 1, 2022, Pages 185-200]
Doneva, Nikolinka
Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]
Dormishi, A.R.
Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]
Doulati Ardejani, F
Environmental Impact Assessment of Coal Washing Plant
(Alborz- Sharghi –Iran) [Volume 3, Issue 2, 2012, Pages 69-77]
Doulati Ardejani, F.
Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium [Volume 1, Number 1, 2010]
Doulati Ardejani, F.
Application of artificial neural network and genetic algorithm to modelling the groundwater inflow to an advancing open pit mine [Volume 6, Issue 1, 2015, Pages 21-30]
Doulati Ardejani, F.
Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]
Doulati Ardejani, F.
A new stochastic 3D seismic inversion using direct sequential simulation and co-simulation in a genetic algorithm framework [Volume 8, Issue 3, 2017, Pages 321-335]
Doulati Ardejani, F.
Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]
Doulati Ardejani, F.
Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review [Volume 11, Issue 2, 2020, Pages 517-537]
Doulati Ardejani, F.
Probabilistic Prediction of Acid Mine Drainage Generation Risk Based on Pyrite Oxidation Process in Coal Washery Rejects - A Case Study [Volume 12, Issue 1, 2021, Pages 127-137]
Doulati Ardejani, F.
Prediction of Acid Mine Drainage Generation Potential of A Copper Mine Tailings Using Gene Expression Programming-A Case Study [Volume 11, Issue 4, 2020, Pages 1127-1140]
Doulati Ardejani, F.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Doulati Ardejani, Faramarz
2D Simulation of Dynamic Transportation of Volatile Hydrocarbons in Vadose Zone of Tehran Oil Refinery and Industrial area of Ray, Tehran, Iran [Volume 13, Issue 3, 2022, Pages 809-820]
Doulati Ardejani, Sh.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Doustmohammadi, M.
Estimation of groundwater inflow situation using fuzzy logic: a case study (Beheshtabad water conveying tunnel, Iran) [Volume 7, Issue 2, 2016, Pages 229-238]
E
Ebadi, H.
Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]
Ebadi, H.
Characterization of microstructural changes of mechanically activated ilmenite [Volume 12, Issue 2, 2021, Pages 515-528]
Ebadi, M
Estimating the deformation modulus of jointed rock mass under multilateral loading condition using analytical methods [Volume 2, Issue 2, 2011, Pages 146-156]
Ebrahimabadi, A.
A New Semi-Quantitative Approach to Open-Pit Mine Sustainability Assessment [Volume 11, Issue 4, 2020, Pages 1191-1203]
Ebrahimabadi, Arash
A New Technical and Economic Approach to Aptimal Plant Species Selection for Open-pit Mine Reclamation Process [Volume 13, Issue 4, 2022, Pages 1091-1105]
Ebrahimabadi, Arash
Performance Prediction of a Hard Rock TBM using Statistical and Artificial Intelligence Methods [Volume 15, Issue 1, 2024, Pages 323-343]
Ebrahimi, Ehsan
Bioflotation and Bioleaching as an Alternative Method for Desulphurization and Ash Reduction in Tabas Coal [Volume 15, Issue 2, 2024, Pages 581-595]
Ebrahimi, M.
Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method [Volume 8, Issue 1, 2017, Pages 103-110]
Ebrahimi, S.
Bayesian Data Fusion: a Reliable Approach for Descriptive Modeling of Ore Deposits [Volume 11, Issue 1, 2020, Pages 63-76]
Ebrahimi Farsangi, M. A.
Extension of Excavation Damaged Zone Due to Longwall Working Effect [Volume 7, Issue 1, 2016, Pages 13-24]
Ebrahimi Farsangi, M. A.
Blast vibration modeling using linear superposition method [Volume 6, Issue 2, 2015, Pages 125-140]
Eftekhari, M.
Extended finite element simulation of crack propagation in cracked Brazilian disc [Volume 6, Issue 1, 2015, Pages 95-102]
Eftekhari, Seyed M.
Analysis of Grinding and Chipping Processes beneath Disc Cutters of Hard Rock Tunnel Boring Machines (Case study: Uma-Oya water Conveyance Tunnel, SriLanka) [Volume 12, Issue 1, 2021, Pages 281-297]
Ehsani, Seyedeh M.
Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]
Eid, Mohamed R.
Statistical Analysis and Optimization of Drilling Process using Response Surface Methodology and Experimental Data [Volume 15, Issue 1, 2024, Pages 55-71]
El Amari, Kh.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
El-Barkooky, Ahmed Niazy
Application of Remote Sensing in Lithological Mapping of Umm Tawat Precambrian Rock Assemblage, North Eastern Desert, Egypt [Volume 14, Issue 2, 2023, Pages 473-491]
Elci, Hakan
Soil liquefaction susceptibility of Akcay residential area (Biga Peninsula, Turkey) close to North Anatolian Fault Zone [Volume 14, Issue 4, 2023, Pages 1141-1153]
El-Rammah, Shady Galal
Rate of Penetration Prediction in Drilling Operation in Oil and Gas Wells by K-nearest Neighbors and Multi-layer Perceptron Algorithms [Volume 14, Issue 3, 2023, Pages 755-770]
El-Sharkawi, Mohamed
Application of Remote Sensing in Lithological Mapping of Umm Tawat Precambrian Rock Assemblage, North Eastern Desert, Egypt [Volume 14, Issue 2, 2023, Pages 473-491]
Elwageeh, Mohamed
Prediction of Iron Ore Grade using Artificial Neural Network, Computational Method, and Geostatistical Technique at El-Gezera Area, Western Desert, Egypt [(Articles in Press)]
Emami Meybodi, E.
Application of Machine Learning Models for Predicting Rock Fracture Toughness Mode-I and Mode-II [Volume 13, Issue 2, 2022, Pages 465-480]
Emami Meybodi, Enayatallah
Experimental Evaluation and Discrete Element Modeling of Shale Delamination Mechanism [Volume 14, Issue 1, 2023, Pages 259-276]
Emami Meybodi, Enayatallah
Analysis of Grain Size Effect on Mechanical Properties of Sandstone with Experimental and Numerical Methods [Volume 14, Issue 2, 2023, Pages 713-730]
Embaby, Abdelrahem Khalefa
Predicting Gabal Gattar Uranium Content as a Function of Total Gamma-ray and Thorium Contents using an Artificial Neural Network in Northeastern Desert, Egypt [Volume 15, Issue 1, 2024, Pages 175-189]
Embaby, Abdelrahem Khalefa
Prediction of Iron Ore Grade using Artificial Neural Network, Computational Method, and Geostatistical Technique at El-Gezera Area, Western Desert, Egypt [(Articles in Press)]
Emery, X. M.
Adaptive Multi-Size Block Modeling for Mineral Resources and Ore Reserves Evaluation [Volume 12, Issue 2, 2021, Pages 339-350]
Emtiazi, G.
XRF analysis of coal bioleaching by chemolithoheterotrophic Alicyclobacillus HRM5 and chemolithoautotrophic Acidithiobacillus ferrooxidans [Volume 9, Issue 3, 2018, Pages 559-566]
Entezam, Sh.
Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]
Entezari, Ali
Investigation on selective rhenium leaching from molybdenite roasting flue dusts [Volume 4, Issue 2, 2013, Pages 77-82]
Entezari Harsini, A.
Geochemistry, petrology, and mineralization in volcanic rocks located in south Neyshabour, NE Iran [Volume 8, Issue 2, 2017, Pages 139-154]
Eskandari Nasab, M
Investigation on selective rhenium leaching from molybdenite roasting flue dusts [Volume 4, Issue 2, 2013, Pages 77-82]
Eskanlou, A.
Interactional effects of bubble size, particle size, and collector dosage on bubble loading in column flotation [Volume 9, Issue 1, 2018, Pages 107-116]
Eslami Andargoli, M. B.
Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]
Esmaeilzadeh, A.
Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]
Esmaeilzadeh, Akbar
Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]
Esmaeilzadeh, Akbar
-Permeability Tensor Calculation of Pumped Storage Power Plant Cavern of Rudbar Lorestan Dam using Crack Tensor [Volume 14, Issue 4, 2023, Pages 1261-1272]
Esmaili, H.
Production of artificial stone slabs using waste granite and marble stone sludge samples [Volume 7, Issue 1, 2016, Pages 135-141]
Esmailzadeh, M.
Application of Fuzzy Gamma Operator to Generate Mineral Prospectivity Mapping for Cu-Mo Porphyry Deposits (Case Study: Kighal-Bourmolk Area, Northwestern Iran) [Volume 13, Issue 1, 2022, Pages 129-153]
Espahbod, M. R.
Application of Power-Law Frequency Fractal Model for Recognition of Vertical Cu Distribution in Milloieh Porphyry Deposit, SE Iran [Volume 11, Issue 2, 2020, Pages 555-562]
Etemadifar, Z.
XRF analysis of coal bioleaching by chemolithoheterotrophic Alicyclobacillus HRM5 and chemolithoautotrophic Acidithiobacillus ferrooxidans [Volume 9, Issue 3, 2018, Pages 559-566]
Etemadzadeh, Sh. Sadat
XRF analysis of coal bioleaching by chemolithoheterotrophic Alicyclobacillus HRM5 and chemolithoautotrophic Acidithiobacillus ferrooxidans [Volume 9, Issue 3, 2018, Pages 559-566]
Ewusi, A.
Impact of mining on groundwater quality in SW Ashanti, Ghana: a preliminary study [Volume 7, Issue 1, 2016, Pages 81-95]
F
Fakhrerad, M.
Underground contour (UGC) mapping using potential field, well log and comparing with seismic interpretation in Lavarestan area [Volume 6, Issue 1, 2015, Pages 55-62]
Fakhri, D.
Experimental Study of Effect of Glass Fibres on Properties of Concrete Containing Micro-silica and Limestone Powder [Volume 12, Issue 3, 2021, Pages 895-906]
Fakhri, D.
Effect of Glass and Polypropylene Hybrid Fibers on Mode I, Mode II, and Mixed-Mode Fracture Toughness of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 2, 2022, Pages 559-577]
Falade, Olutosin Mojisola
Mine Geo-environment Assessment: Carbonate Rock Mine Waste as Construction Material Addictive and Coupled with Pollution Index Model [Volume 14, Issue 1, 2023, Pages 179-196]
Falahati, N.
Studying Effect of Modifying Nano-Mineral Adsorbents on Efficiency of Dye Removal from Industrial Effluents [Volume 12, Issue 1, 2021, Pages 219-233]
Faluyi, Joshua Oluwaseyi
Improvement of Drill Bit-Button Performance and Efficiency during Drilling: an application of LSTM Model to Nigeria Southwest Mines [Volume 14, Issue 4, 2023, Pages 1121-1139]
Famobuwa, Oluwaseun Victor
Granite Downstream Production Dependent Size and Profitability Assessment: an application of Mathematical-based Artificial Intelligence Model and WipFrag Software [Volume 15, Issue 2, 2024, Pages 497-515]
Faqir, H.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Farag, Hussin
Prediction of Iron Ore Grade using Artificial Neural Network, Computational Method, and Geostatistical Technique at El-Gezera Area, Western Desert, Egypt [(Articles in Press)]
Farahbakhsh, E.
A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]
Farahbakhsh, E.
A comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran [Volume 9, Issue 4, 2018, Pages 917-940]
Farahbakhsh, M.
Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review [Volume 11, Issue 2, 2020, Pages 517-537]
Farrokh, E.
Introducing hard rock TBMs’ downtime analysis model with reference to past case histories’ data [Volume 9, Issue 2, 2018, Pages 457-472]
Farrokh, E.
TBM Tunneling Construction Time with Respect to Learning Phase Period and Normal Phase Period [Volume 11, Issue 2, 2020, Pages 539-554]
Farrokhi, N.
Bayesian Data Fusion: a Reliable Approach for Descriptive Modeling of Ore Deposits [Volume 11, Issue 1, 2020, Pages 63-76]
Farzanegan, A.
Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills [Volume 2, Issue 1, 2011]
Farzanegan, Akbar
Multiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics [Volume 4, Issue 1, 2013, Pages 67-76]
Farzaneh Bahalgardi, N.
Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]
Fatehi, Mohammad
Relationship between fracture dip angle, aperture and fluid flow in the fractured rock masses [Volume 2, Issue 2, 2011, Pages 136-145]
Fatehi Marji, M.
On the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method [Volume 2, Issue 1, 2011]
Fatehi Marji, M.
A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [Volume 6, Issue 1, 2015, Pages 73-93]
Fatehi Marji, M.
Numerical investigation of effect of crack geometrical parameters on hydraulic fracturing process of hydrocarbon reservoirs [Volume 7, Issue 2, 2016, Pages 205-214]
Fatehi Marji, M.
Rock mass structural data analysis using image processing techniques (Case study: Choghart iron ore mine northern slopes) [Volume 8, Issue 1, 2017, Pages 61-74]
Fatehi Marji, M.
A boundary element/finite difference analysis of subsidence phenomenon due to underground structures [Volume 8, Issue 2, 2017, Pages 237-253]
Fatehi Marji, M.
Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]
Fatehi Marji, M.
Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]
Fatehi Marji, M.
Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]
Fatehi Marji, M.
Wellbore Trajectory Optimization of an Iranian Oilfield Based on Mud Pressure and Failure Zone [Volume 11, Issue 1, 2020, Pages 193-220]
Fatehi Marji, M.
On Direct Tensile Strength Measuring of Anisotropic Rocks [Volume 12, Issue 2, 2021, Pages 491-499]
Fatehi Marji, M.
Compressive Failure Analyses of Rock-Like Materials by Experimental and Numerical Methods [Volume 12, Issue 3, 2021, Pages 769-783]
Fatehi Marji, M.
On Propagation Mechanism of Cracks Emanating from Two Neighboring Holes in Cubic Concrete Specimens under Various Lateral Confinements [Volume 12, Issue 4, 2021, Pages 1003-1017]
Fatehi Marji, M.
A Modified Indirect Boundary Element Analysis for Fatigue Behavior Assessment of Rock-Like Materials Based on Linear Elastic Fracture Mechanics [Volume 12, Issue 4, 2021, Pages 1189-1203]
Fatehi Marji, M.
Application of Machine Learning Models for Predicting Rock Fracture Toughness Mode-I and Mode-II [Volume 13, Issue 2, 2022, Pages 465-480]
Fatehi Marji, M.
Cavity Growth in Underground Coal Gasification Method by Considering Cleat Length and Inclination of Coal with Elasto-Brittle Behavior [Volume 13, Issue 2, 2022, Pages 607-625]
Fatehi Marji, Mohammad
Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]
Fatehi Marji, Mohammad
Simulation of Crack Propagation Mechanism in Porous Media using Modified linear Element Displacement Discontinuity Method [Volume 13, Issue 3, 2022, Pages 903-927]
Fatehi Marji, Mohammad
PFC Simulation of Brazilian Tensile Strength Test in Geomaterials’ Specimens with T-shaped Non-persistent Joints [Volume 13, Issue 4, 2022, Pages 1189-1209]
Fatehi Marji, Mohammad
Experimental Evaluation and Discrete Element Modeling of Shale Delamination Mechanism [Volume 14, Issue 1, 2023, Pages 259-276]
Fatehi Marji, Mohammad
Analytical Solutions of First-order Displacement Discontinuity Elements in Poroelasticity [Volume 14, Issue 2, 2023, Pages 601-618]
Fatehi Marji, Mohammad
Investigation of Shear Properties of Open Non-persistent Latitudinal Discontinuities of Same Level [Volume 14, Issue 4, 2023, Pages 1361-1371]
Fatehi Marji, Mohammad
Coupling discontinuous deformation analysis and displacement discontinuity method for simulating failure mechanism in geomaterials [(Articles in Press)]
Fatehi Marji, Mohammad
On the 2D discrete element analyses of the transversely isotropic elastic geo-materials; insight to scale effects and loading rate [(Articles in Press)]
Fatehi Marji, Mohammad
Discrete elements analysis of sand production mechanism in oil well considering effects of in situ stress and fluid pressure [(Articles in Press)]
Fatemi Aghda, Seyed M.
Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]
Fathi, M.
Optimizing Extreme Learning Machine Algorithm using Particle Swarm Optimization to Estimate Iron Ore Grade [Volume 12, Issue 2, 2021, Pages 397-411]
Fathi, M. B.
Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]
Fathianpour, N.
Inverse modeling of HEM data using a new inversion algorithm [Volume 1, Number 2, 2010]
Fathianpour, Nader
Approximate resistivity and susceptibility mapping from airborne electromagnetic and magnetic data, a case study for a geologically plausible porphyry copper unit in Iran [Volume 4, Issue 2, 2013, Pages 133-146]
Fathzade, A.
Comparison between Helical and Elliptical Static Mixers Performance in Column Flotation of Sungun Copper Plant [Volume 11, Issue 1, 2020, Pages 221-230]
Fathzadeh, Ahmad
A Process Mineralogy Based Approach for Arsenic Removal from Copper Concentrate in Cu – Mo Flotation Circuit [Volume 14, Issue 3, 2023, Pages 929-944]
Fattahi, H.
Use of artificial intelligence techniques to predict distribution of heavy metals in groundwater of Lakan lead-zinc mine in Iran [Volume 8, Issue 1, 2017, Pages 35-48]
Fattahi, H.
Prediction of slope stability using adaptive neuro-fuzzy inference system based on clustering methods [Volume 8, Issue 2, 2017, Pages 163-177]
Fattahi, H.
Predicting tensile strength of rocks from physical properties based on support vector regression optimized by cultural algorithm [Volume 8, Issue 3, 2017, Pages 467-474]
Fattahi, H.
A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]
Fattahi, H.
Bayesian prediction of rotational torque to operate horizontal drilling [Volume 10, Issue 2, 2019, Pages 507-515]
Fattahi, H.
A New Method for Predicting Indirect Tensile Strength of Sandstone Rock Samples [Volume 11, Issue 3, 2020, Pages 899-908]
Fattahi, H.
Investigating Correlation of Physico-Mechanical Parameters and P-Wave Velocity of Rocks: a Comparative Intelligent Study [Volume 12, Issue 3, 2021, Pages 863-875]
Fattahi, H.
Reliability Analysis of Surface Settlement caused by Mechanized Tunneling-a Case Study [Volume 13, Issue 1, 2022, Pages 201-216]
Fattahi, Hadi
A New Method for Forecasting Uniaxial Compressive Strength of Weak Rocks [Volume 11, Issue 2, 2020, Pages 505-515]
Fattahi, Hadi
Enhancing Energy Efficiency in Stone Cutting: Utilizing Rock Engineering System Method for Precise Maximum Energy Consumption Prediction [Volume 15, Issue 1, 2024, Pages 345-364]
Fawzy, M. Mohamed
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Fayiah, M.
Mining and Environmental Degradation: a Gift Brings Grief Scenario for Mining Communities in Sierra Leone [Volume 11, Issue 2, 2020, Pages 347-361]
Fazlavi, Ali
Box-Behnken Design of Experiments Investigation forAdsorption of Cd2+ onto carboxymethyl Chitosan Magnetic Nanoparticles [Volume 3, Issue 1, 2012, Pages 51-59]
Feizollahi, S.
Solvent extraction of copper from an industrial sulfate liquor using Chemorex CP-150 [Volume 9, Issue 4, 2018, Pages 905-916]
Feroze, Navid
Selection of Appropriate Probability Distributions for Rock Analysis using Laser-induced Breakdown Spectroscopy [Volume 13, Issue 4, 2022, Pages 997-1013]
Fesenko, E. Viktorovych
Substantiating Parameters of Reinforced Rock Supports [Volume 12, Issue 4, 2021, Pages 953-967]
Filbandi Kashkouli, M.
Dimensionality analysis of subsurface structures in magnetotellurics using different methods (a case study: oil field in Southwest of Iran) [Volume 7, Issue 1, 2016, Pages 119-126]
Fissha, Yewuhalashet
Mine Geo-environment Assessment: Carbonate Rock Mine Waste as Construction Material Addictive and Coupled with Pollution Index Model [Volume 14, Issue 1, 2023, Pages 179-196]
Fissha, Yewuhalashet
Artificial Neural Network Modeling as an Approach to Limestone Blast Production Rate Prediction: a Comparison of PI-BANN and MVR Models [Volume 14, Issue 2, 2023, Pages 375-388]
Fissha, Yewuhalashet
Granite Downstream Production Dependent Size and Profitability Assessment: an application of Mathematical-based Artificial Intelligence Model and WipFrag Software [Volume 15, Issue 2, 2024, Pages 497-515]
Fooladi, M.
Influence of Physical and Chemical Material Properties on Mining Soil Erosion Processes Around Mineral Salts Company in Mighan playa, Arak, Iran [Volume 12, Issue 3, 2021, Pages 725-741]
Forson, Eric Dominic
Mineral prospectivity modeling over the Julie Tenement of Northwestern (NW) Ghana using geophysical datasets [(Articles in Press)]
Frough, Omid
Evaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2) [Volume 3, Issue 2, 2012, Pages 89-98]
Fu, Jinwei
Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]
Fuanya, C.
Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]
G
Galvan-Tejada, J. I
Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]
Gang, H.
Ultimate Pit Limit Optimization using Boykov-Kolmogorov Maximum Flow Algorithm [Volume 12, Issue 1, 2021, Pages 1-13]
Ganjeh, M.
Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]
Gao, M.S.
Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]
Garmsiri, Mohammad Reza
A new approach to define batch settling curves for analyzing the sedimentation characteristics [Volume 3, Issue 2, 2012, Pages 103-111]
Genc, B.
A Comparative Study on Machine Learning Algorithms for Geochemical Prediction Using Sentinel-2 Reflectance Spectroscopy [Volume 12, Issue 4, 2021, Pages 987-1001]
Geranian, H.
Application of Probabilistic Clustering Algorithms to Determine Mineralization Areas in Regional-Scale Exploration Studies [Volume 11, Issue 4, 2020, Pages 1059-1078]
Ghadernejad, S.
A Modified Schimazek’s F-abrasiveness Factor for Evaluating Abrasiveness of Andesite Rocks in Rock Sawing Process [Volume 11, Issue 2, 2020, Pages 563-575]
Ghadimi, F.
Use of artificial intelligence techniques to predict distribution of heavy metals in groundwater of Lakan lead-zinc mine in Iran [Volume 8, Issue 1, 2017, Pages 35-48]
Ghadimi, F.
Application of alteration index and zoning for Pb-Znexploration in Haft-Savaran area, Khomein, Iran [Volume 9, Issue 1, 2018, Pages 229-242]
Ghadimi, F.
Assessment of Heavy Metal Contamination in Waters due to Mineral Salts Company from Mighan playa/lake, Arak, Iran [Volume 11, Issue 1, 2020, Pages 171-184]
Ghadimi, F.
Influence of Physical and Chemical Material Properties on Mining Soil Erosion Processes Around Mineral Salts Company in Mighan playa, Arak, Iran [Volume 12, Issue 3, 2021, Pages 725-741]
Ghadiri-Sufi, E.
Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]
Ghaedi, Hossein
Enhancing Energy Efficiency in Stone Cutting: Utilizing Rock Engineering System Method for Precise Maximum Energy Consumption Prediction [Volume 15, Issue 1, 2024, Pages 345-364]
Ghaedi Ghalini, M.
Estimation of In-Situ Block Size Distribution in Jointed Rock Masses using Combined Photogrammetry and Discrete Fracture Network [Volume 13, Issue 1, 2022, Pages 175-184]
Ghaemmaghami, Elahe
Alumina Extraction by Lime-soda Sinter Process from Low-grade Bauxite Soil of Semirom Mine [Volume 13, Issue 4, 2022, Pages 1159-1169]
Ghanbari, K.
Semi-quantitative environmental impact assessment and sustainability level determination of coal mining using a mathematical model [Volume 7, Issue 2, 2016, Pages 185-193]
Ghanbari, K.
Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]
Ghanbari, K.
Quantifying Roof Falling Potential based on CMRR Method by Incorporating DEMATEL-MABAC Method; A Case Study [Volume 12, Issue 1, 2021, Pages 151-162]
Ghanbari, M.
Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]
Ghanizadeh, A. R.
Mechanical Properties of Low Plasticity Clay Soil Stabilized with Iron Ore Mine Tailing and Portland Cement [Volume 11, Issue 3, 2020, Pages 837-853]
Ghanizadeh Zarghami, A.
A New Technical and Economic Model to Calculate Specific Charge and Specific Drilling Using Hole Diameter, Bench Height, Uniaxial Compressive Strength, and Joint Set Orientation [Volume 11, Issue 4, 2020, Pages 991-1005]
Ghannadpour, Seyyed S.
Investigation of Geochemical Correlation Between Radioactive and Rare Earth Elements: Case Study of Baghak Mine, NE Iran [Volume 12, Issue 2, 2021, Pages 569-587]
Ghannadpour, Seyyed Saeed
Satellite Image Processing: Application for Alteration Separation based on U-Statistic Method in Zafarghand Porphyry System (Iran) [Volume 15, Issue 2, 2024, Pages 667-681]
Gharabaghi, M.
Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district [Volume 6, Issue 2, 2015, Pages 237-249]
Gharabaghi, M.
Concentration and recycling of rare earth elements (REEs) from iron mine waste using a combination of physical separation methods [Volume 7, Issue 2, 2016, Pages 195-203]
Gharabaghi, M.
Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]
Gharabaghi, M.
Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]
Gharabaghi, M.
Effects of Flocculant, Surfactant, Coagulant, and Filter Aid on Efficiency of Filtration Processing of Copper Concentrate: Mechanism and Optimization [Volume 11, Issue 1, 2020, Pages 119-141]
Gharanjik, Sh.
Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching [Volume 8, Issue 4, 2017, Pages 523-537]
Gharibie, Kh.
An investigation of the particle size effect on coal flotation kinetics using multivariable regression [Volume 1, Number 1, 2010]
Ghasemi, A.R.
Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]
Ghasemi, A.R.
Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]
Ghasemi, A.R.
Accuracy of Discrete Element Method Simulations: Rolling and Sliding Frictions Effects-Case study: Iron Ore Pellets [Volume 11, Issue 4, 2020, Pages 1205-1216]
Ghasemi, E.
Development of a site-specific regression model for assessment of road-header cutting performance of Tabas coal mine based on rock properties [Volume 8, Issue 4, 2017, Pages 663-672]
Ghasemi, E.
Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties [Volume 10, Issue 4, 2019, Pages 917-928]
Ghasemi, Milad
An Integrated Geo-Statistical Methodology for an Optimum Resource Estimation of Angouran Underground Mine [Volume 14, Issue 2, 2023, Pages 635-651]
Ghasemi, R.
Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]
Ghasemi, S.
Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]
Ghasemi, Sina
Role of Functional Groups in Selective Adsorption of Gold over Copper Cyano complexes by Activated Carbon: A DFT Study [Volume 13, Issue 3, 2022, Pages 891-901]
Ghasemloonia, A.
Feasibility study of underground salt caverns in Western Newfoundland: experimental and finite element investigation of creep-induced damage [Volume 6, Issue 2, 2015, Pages 205-224]
Ghasemzadeh, S.
Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]
Ghasvareh, M. A.
Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]
Ghavami Riabi, R.
Prediction of mineral deposit model and identification of mineralization trend in depth using frequency domain of surface geochemical data in Dalli Cu-Au porphyry deposit [Volume 6, Issue 2, 2015, Pages 225-236]
Ghavami Riabi, Seyed R.
Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]
Ghavami Riabi, Seyed R.
Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]
Ghavami-Riabi, R.
Geochemical and mineralogical characteristic of the VHMS alteration pipe, major elements variations and peraluminous ratio, in high grade metamorphosed rocks [Volume 1, Number 2, 2010]
Ghavami-Riabi, Reza
Investigation of blind massive sulphide deposit signatures in the calcrete layers as a geochemical barrier: A case study of Areachap, Kantienpan and Copperton deposits [Volume 2, Issue 2, 2011, Pages 86-101]
Ghavami-Riabi, Seyed R.
Bayesian Data Fusion: a Reliable Approach for Descriptive Modeling of Ore Deposits [Volume 11, Issue 1, 2020, Pages 63-76]
Ghaziania, H. hadizadeh
Design of Loading and Transportation Fleet in Open-Pit Mines using Simulation Approach and Metaheuristic Algorithms [Volume 12, Issue 4, 2021, Pages 1177-1188]
Ghazizadeh, Z.
Design of An Intelligent Model for Strategic Planning in Mineral Holding: Case study, Shahab-Sang Holding [Volume 11, Issue 4, 2020, Pages 1115-1126]
Ghazvinian, A.
On Applicability of Some Indirect Tests for Estimation of Tensile Strength of Anisotropic Rocks [Volume 11, Issue 3, 2020, Pages 711-720]
Ghiasi-Freez, J.
Porosity classification from thin sections using image analysis and neural networks including shallow and deep learning in Jahrum formation [Volume 9, Issue 2, 2018, Pages 513-525]
Ghiasi-Freez, J.
Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]
Ghobadi, Bahman
Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill [Volume 5, Issue 2, 2014, Pages 121-128]
Ghobadi Samani, M.
A Mathematical Model to Optimize Allocation Sequence in Dispatching Problem [Volume 11, Issue 1, 2020, Pages 185-192]
Ghoddocy Nejad, D.
Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]
Ghodrati, B.
Maintainability measure based on operating environment, a case study: Sungun copper mine [Volume 8, Issue 3, 2017, Pages 511-521]
Ghodrati, B.
Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]
Gholami, Ali
Approximate resistivity and susceptibility mapping from airborne electromagnetic and magnetic data, a case study for a geologically plausible porphyry copper unit in Iran [Volume 4, Issue 2, 2013, Pages 133-146]
Gholami, Morteza
Multiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics [Volume 4, Issue 1, 2013, Pages 67-76]
Gholami, R.
Support vector regression for prediction of gas reservoirs permeability [Volume 2, Issue 1, 2011]
Gholami, R.
The impact of poor cementing casing damage: A numerical simulation study [Volume 6, Issue 1, 2015, Pages 41-53]
Gholamnejad, J.
Determination of the largest pit with the non-negative net profit in the open pit mines [Volume 1, Number 2, 2010]
Gholamnejad, J.
Numerical investigation of effect of crack geometrical parameters on hydraulic fracturing process of hydrocarbon reservoirs [Volume 7, Issue 2, 2016, Pages 205-214]
Gholamnejad, J.
Rock mass structural data analysis using image processing techniques (Case study: Choghart iron ore mine northern slopes) [Volume 8, Issue 1, 2017, Pages 61-74]
Gholamnejad, J.
A boundary element/finite difference analysis of subsidence phenomenon due to underground structures [Volume 8, Issue 2, 2017, Pages 237-253]
Gholamnejad, J.
Application of stochastic programming for iron ore quality control [Volume 9, Issue 2, 2018, Pages 331-338]
Gholamnejad, Javad
Relationship between fracture dip angle, aperture and fluid flow in the fractured rock masses [Volume 2, Issue 2, 2011, Pages 136-145]
Gholamnejad, Javad
Prediction of the deformation modulus of rock masses using Artificial Neural Networks and Regression methods [Volume 4, Issue 1, 2013, Pages 35-43]
Gholampour, O.
Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]
Gholinejad, M.
Delineation of Iron Alteration Zones using Spectrum-Area Fractal Model and TOPSIS Decision-Making Method in Tarom Metallogenic Zone, NW Iran [Volume 13, Issue 2, 2022, Pages 503-525]
Ghomi, M.
Application of alteration index and zoning for Pb-Znexploration in Haft-Savaran area, Khomein, Iran [Volume 9, Issue 1, 2018, Pages 229-242]
Ghomi, Mohammad
Identification of groundwater contamination sources of Lakan lead and zinc mine, Khomain, Iran [Volume 3, Issue 2, 2012, Pages 121-134]
Ghomi, S.
Underground contour (UGC) mapping using potential field, well log and comparing with seismic interpretation in Lavarestan area [Volume 6, Issue 1, 2015, Pages 55-62]
Ghoorchi, M.
Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]
Ghorbani, A
Implementation of flotation and gravity separation, to process Changarzeh sulfide-oxide lead ore [Volume 3, Issue 2, 2012, Pages 79-87]
Ghorbani, A.
Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]
Ghorbani, H.
A new method to consider spatial risk assessment of cross-correlated heavy metals using geo-statistical simulation [Volume 8, Issue 3, 2017, Pages 373-391]
Ghorbani, Yousef
A Process Mineralogy Based Approach for Arsenic Removal from Copper Concentrate in Cu – Mo Flotation Circuit [Volume 14, Issue 3, 2023, Pages 929-944]
Ghotbi-Ravandi, E.
Analytical analysis of ultimate ground pressure on tunnel support system [Volume 6, Issue 2, 2015, Pages 151-157]
Giadom, F. dumbari
Chemical Characteristics of Discharges from Two Derelict Coal Mine Sites in Enugu Nigeria: Implication for Pollution and Acid Mine Drainage [Volume 12, Issue 1, 2021, Pages 89-111]
Girma, W.
Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]
Gloaguen, E.
A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]
Glover, Eric Tetteh
Radiological Baseline Assessment of a Naturally Occurring Radioactive Material (NORM) Waste Disposal Facility in Ghana [Volume 14, Issue 1, 2023, Pages 33-46]
Glyva, Valentyn Anatolyovich
Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]
Godbole, A.
DPM flow pattern of LHD in underground mines with different ventilation conditions [Volume 10, Issue 2, 2019, Pages 315-326]
Goharkhah, M.
An Investigation on Tailing Slurry Transport in Kooshk lead-Zinc Mine in Iran Based on Non-Newtonian Fluid Rheology: an Experimental Study [Volume 12, Issue 3, 2021, Pages 877-893]
Golizadeh, B.
Comparison between Helical and Elliptical Static Mixers Performance in Column Flotation of Sungun Copper Plant [Volume 11, Issue 1, 2020, Pages 221-230]
Golmohammadi, A.
Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]
Golomeov, Blagoj
Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]
Golomeova, Mirjana
Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]
Golshani, A.
On the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method [Volume 2, Issue 1, 2011]
Gomaa, Sayed
Predicting Gabal Gattar Uranium Content as a Function of Total Gamma-ray and Thorium Contents using an Artificial Neural Network in Northeastern Desert, Egypt [Volume 15, Issue 1, 2024, Pages 175-189]
Gomaa, Sayed
Prediction of Iron Ore Grade using Artificial Neural Network, Computational Method, and Geostatistical Technique at El-Gezera Area, Western Desert, Egypt [(Articles in Press)]
Goshtasbi, K.
On the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method [Volume 2, Issue 1, 2011]
Goshtasbi, K.
Prediction of ultimate strength of shale using artificial neural network [Volume 9, Issue 1, 2018, Pages 91-105]
Goshtasbi, K.
New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]
Goshtasbi, K.
Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]
Goshtasbi, K.
An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]
Goshtasbi, K.
Study of convergence confinement method curves considering pore-pressure effect [Volume 10, Issue 2, 2019, Pages 479-492]
Goshtasbi, K.
A New Technical and Economic Model to Calculate Specific Charge and Specific Drilling Using Hole Diameter, Bench Height, Uniaxial Compressive Strength, and Joint Set Orientation [Volume 11, Issue 4, 2020, Pages 991-1005]
Goshtasbi, K.
A Numerical Investigation of TBM Disc Cutter Life Prediction in Hard Rocks [Volume 11, Issue 4, 2020, Pages 1095-1113]
Goshtasbi, Kamran
An Investigation into Bench Health Monitoring under Blast Loading in Hoek-Brown Failure Criterion using Finite Difference Method [Volume 13, Issue 3, 2022, Pages 875-889]
Goudarzi, N.
Investigation of performances of solvents D2EHPA, Cyanex272, and their mixture system in separation of some rare earth elements from a Nitric Acid solution [Volume 7, Issue 2, 2016, Pages 143-148]
Govinda Raj, M.
Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]
Grandchamp, C.A.P.
Formation of a deep pit lake: case study of Aguas Claras, Brazil [Volume 1, Number 1, 2010]
Guido, Giuseppe
Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]
Guleria, Kashitij
Improvement of Geotechnical Properties of Soil using Calcium Carbide, Waste Foundry Sand and Polypropylene Fibre [Volume 14, Issue 2, 2023, Pages 449-471]
Gupta, Aditya
A Deep Neural Network for Classification of Land Use Satellite Datasets in Mining Environments [Volume 13, Issue 3, 2022, Pages 797-808]
Gupta, Sushindra Kumar
Estimation of Land Surface Temperature of Sahibzada Ajit Singh Nagar, Punjab, India [Volume 14, Issue 2, 2023, Pages 527-544]
Gupta, Sushindra Kumar
Ground Water Quality Analysis using Machine Learning Techniques: a Critical Appraisal [Volume 15, Issue 2, 2024, Pages 419-426]
H
Habashi, F.
Pollution problems in the metallurgical industry: A review [Volume 2, Issue 1, 2011, Pages 17-26]
Habashi, Jabar
Classification of ASTER Data by Neural Network to Mapping Alterations Related to Copper and Iron Mineralization in Birjand [Volume 15, Issue 2, 2024, Pages 649-665]
Habibkhah, N.
Robust Principal Component Analysis and Fractal Methods to Delineate Mineralization-Related Hydrothermally-Altered Zones from ASTER Data: A Case Study of Dehaj Terrain, Central Iran [Volume 11, Issue 4, 2020, Pages 1023-1037]
Habibnia, A.
Anomaly delineation of porphyry copper deposits of Hanza Region through geochemical data analyses and multispectral remote sensing [Volume 10, Issue 3, 2019, Pages 747-762]
Hadadi, F.
Probabilistic Prediction of Acid Mine Drainage Generation Risk Based on Pyrite Oxidation Process in Coal Washery Rejects - A Case Study [Volume 12, Issue 1, 2021, Pages 127-137]
Hadei, M. R.
On Applicability of Some Indirect Tests for Estimation of Tensile Strength of Anisotropic Rocks [Volume 11, Issue 3, 2020, Pages 711-720]
Hadzi-Nikolova, Marija
Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]
Haeri, H.
A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [Volume 6, Issue 1, 2015, Pages 73-93]
Haeri, H.
On Direct Tensile Strength Measuring of Anisotropic Rocks [Volume 12, Issue 2, 2021, Pages 491-499]
Haeri, H.
Compressive Failure Analyses of Rock-Like Materials by Experimental and Numerical Methods [Volume 12, Issue 3, 2021, Pages 769-783]
Haeri, H.
On Propagation Mechanism of Cracks Emanating from Two Neighboring Holes in Cubic Concrete Specimens under Various Lateral Confinements [Volume 12, Issue 4, 2021, Pages 1003-1017]
Haeri, Hadi
Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]
Haeri, Hadi
PFC Simulation of Brazilian Tensile Strength Test in Geomaterials’ Specimens with T-shaped Non-persistent Joints [Volume 13, Issue 4, 2022, Pages 1189-1209]
Haeri, Hadi
Investigation of Shear Properties of Open Non-persistent Latitudinal Discontinuities of Same Level [Volume 14, Issue 4, 2023, Pages 1361-1371]
Haeri, Hadi
On the 2D discrete element analyses of the transversely isotropic elastic geo-materials; insight to scale effects and loading rate [(Articles in Press)]
Haghdadi, Aghil
Role of Glycine in Cyanidation of Copper Bearing Gold Ores: an Experimental and Molecular Modeling Study [Volume 14, Issue 3, 2023, Pages 999-1009]
Haghgouei, H.
Semi-Analytical Study of Settlement of Two Interfering Foundations Placed on a Slope [Volume 12, Issue 2, 2021, Pages 457-470]
Haghi, P.
A new model for mining method selection based on grey and TODIM methods [Volume 8, Issue 1, 2017, Pages 49-60]
Haghkish, Hamed
The effect of soil and grout mixture on the ground surface settlement in mechanized excavation [(Articles in Press)]
Haghnazar, H.
Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]
Haile, Kiross
Artificial Neural Network Modeling as an Approach to Limestone Blast Production Rate Prediction: a Comparison of PI-BANN and MVR Models [Volume 14, Issue 2, 2023, Pages 375-388]
Hajati, A.
Assessment of Heavy Metal Contamination in Waters due to Mineral Salts Company from Mighan playa/lake, Arak, Iran [Volume 11, Issue 1, 2020, Pages 171-184]
Hajati, Abdolmotaleb
Identification of groundwater contamination sources of Lakan lead and zinc mine, Khomain, Iran [Volume 3, Issue 2, 2012, Pages 121-134]
Hajializadeh, S.
Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]
Haji Amin Shirazi, Hassan
A new approach to define batch settling curves for analyzing the sedimentation characteristics [Volume 3, Issue 2, 2012, Pages 103-111]
Hajilou, S.
Comparison between Helical and Elliptical Static Mixers Performance in Column Flotation of Sungun Copper Plant [Volume 11, Issue 1, 2020, Pages 221-230]
Hajizadeh, A.
Prediction of effect of fine particle removal on efficiency of a spiral circuit by size-by-size partition curves [Volume 8, Issue 4, 2017, Pages 567-571]
Hajizadeh, F.
Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]
Haji-Zadeh, A.
Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]
Hajkazemiha, N.
Evaluation of Mine Reclamation Criteria using Delphi-Fuzzy Approach [Volume 12, Issue 2, 2021, Pages 367-384]
Hakimiyan Bidgoli, M.
Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines [Volume 10, Issue 4, 2019, Pages 903-916]
Hamidian, H.
Comparative and Competitive Study of LDH/Diatomite and Chitosan/Diatomite for Adsorptive Removal of Chloride Ion from Aqueous Solution [Volume 11, Issue 1, 2020, Pages 261-279]
Hamidian, H.
A New Semi-Quantitative Approach to Open-Pit Mine Sustainability Assessment [Volume 11, Issue 4, 2020, Pages 1191-1203]
Hamidian, Hadi
A New Technical and Economic Approach to Aptimal Plant Species Selection for Open-pit Mine Reclamation Process [Volume 13, Issue 4, 2022, Pages 1091-1105]
Hamidian Shoormasti, H.
X-Ray mapping and the mineralogy pattern of nickel laterite ore: Bavanat, Fars, Iran [Volume 10, Issue 3, 2019, Pages 811-820]
Hamidian Shoormasti, H.
Prediction of Blasting Cost in Limestone Mines Using Gene Expression Programming Model and Artificial Neural Networks [Volume 11, Issue 1, 2020, Pages 281-300]
Hammed, Mohamed Saleh Hassan
Implementation of Remote Sensing Techniques in Structural and Lithological Mapping of Northwestern Margin of Red Sea, Egypt [Volume 14, Issue 2, 2023, Pages 389-411]
Hammed, Mohamed Saleh Hassan
Application of Remote Sensing in Lithological Mapping of Umm Tawat Precambrian Rock Assemblage, North Eastern Desert, Egypt [Volume 14, Issue 2, 2023, Pages 473-491]
Hammed, Mohamed S.H.
Geological Mapping and Facies Characterization of Miocene Evaporites along Central-eastern Margin of Gulf of Suez Rift by Remote Sensing Techniques [Volume 15, Issue 1, 2024, Pages 151-173]
Hamzaban, M. T.
Determination of scratching energy index for Cerchar abrasion test [Volume 9, Issue 1, 2018, Pages 73-89]
Han, Tok Hyong
Platform Motion at Lower Loading Station in Trucklift Slope Hoisting System with Varying Profile of Track [Volume 14, Issue 1, 2023, Pages 66-77]
Han, Un Chol
Suitable Mining Method Selection using HFGDM-TOPSIS Method: a Case Study of an Apatite Mine [Volume 13, Issue 2, 2022, Pages 357-374]
Han, Un Chol
Platform Motion at Lower Loading Station in Trucklift Slope Hoisting System with Varying Profile of Track [Volume 14, Issue 1, 2023, Pages 66-77]
Han, Un Chol
Determination of Mechanical Parameters of Anthracite Coal using Flying Squirrel Search Algorithm with Timber Load and Displacement Data [Volume 15, Issue 1, 2024, Pages 21-40]
Han, Un Chol
Simulation of Pyrrhotite Removal from Scheelite Ore by Magnetic Force in Table Concentration [Volume 14, Issue 4, 2023, Pages 1219-1237]
Hasani, M.
Kinetics of Sphalerite Leaching by Sodium Nitrate in Sulfuric Acid [Volume 7, Issue 1, 2016, Pages 1-12]
Hasani, M.
Selective Recovery of Pt, Pd, and Rh from Spent Catalysts by Functionalized Magnetite Nanoparticles [Volume 13, Issue 2, 2022, Pages 481-491]
Hasanipanah, M.
Investigating Correlation of Physico-Mechanical Parameters and P-Wave Velocity of Rocks: a Comparative Intelligent Study [Volume 12, Issue 3, 2021, Pages 863-875]
Hasankhoei, A. R.
Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]
Hasankhoei, A.R.
Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]
Hasanpour, R.
Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]
Hasanzadeh, Vahid
Back-calculation of mechanical parameters of shell and balls materials from discrete element method simulations [Volume 3, Issue 1, 2012, Pages 33-40]
Hasanzadeh_Sablouei, A.
Copper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study [Volume 10, Issue 4, 2019, Pages 1013-1029]
Hashemolhosseini, H.
Extended finite element simulation of crack propagation in cracked Brazilian disc [Volume 6, Issue 1, 2015, Pages 95-102]
Hashemolhosseini, Hamid
An Experimental-Intelligent Method to Predict Noise Value of Drilling in Dimension Stone Industry [Volume 13, Issue 3, 2022, Pages 693-713]
Hashemzadeh Ansar, B.
Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]
Hasiri, Morteza
Satellite Image Processing: Application for Alteration Separation based on U-Statistic Method in Zafarghand Porphyry System (Iran) [Volume 15, Issue 2, 2024, Pages 667-681]
Hassan, Murtaza
Analysis of Land Subsidence in Joshimath Township using GIS and Remote Sensing [(Articles in Press)]
Hassani, H.
Phytoextraction-based process of metal absorption from soil in mining areas (tailing dams) by Medicago sativa L. (Alfalfa) (Case study: Sarcheshmeh porphyry copper mine, SE of Iran) [Volume 8, Issue 3, 2017, Pages 419-431]
Hassani, H.
Field study on Re and heavy metal phytoextraction and phytomining potentials by native plant species growing at Sarcheshmeh copper mine tailings, SE Iran [Volume 9, Issue 1, 2018, Pages 183-194]
Hassani, H.
Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]
Hassani, H.
Robust Principal Component Analysis and Fractal Methods to Delineate Mineralization-Related Hydrothermally-Altered Zones from ASTER Data: A Case Study of Dehaj Terrain, Central Iran [Volume 11, Issue 4, 2020, Pages 1023-1037]
Hassani, H.
Fe3O4@TiO2@V2O5 as an Efficient Magnetic Nanoparticle for Synthesis of Di-Indolyl Oxindole Derivatives [Volume 12, Issue 4, 2021, Pages 1041-1053]
Hassanpour, J.
Analysis of Grinding and Chipping Processes beneath Disc Cutters of Hard Rock Tunnel Boring Machines (Case study: Uma-Oya water Conveyance Tunnel, SriLanka) [Volume 12, Issue 1, 2021, Pages 281-297]
Hayati, Erfan
Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]
Hazrati Aghchai, M.
On Analytic Solutions of Elastic Net Displacements around a Circular Tunnel [Volume 11, Issue 2, 2020, Pages 419-432]
Hebblewhite, B.
Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]
Hedayatzadeh, Mansour
Performance Prediction of a Hard Rock TBM using Statistical and Artificial Intelligence Methods [Volume 15, Issue 1, 2024, Pages 323-343]
Heidarnia, A.
Iron leaching from bauxite ore in hydrochloric acid using response surface methodology [Volume 6, Issue 1, 2015, Pages 103-108]
Hekmatnejad, A.
Identification of Geochemical Anomalies Using Fractal and LOLIMOT Neuro-Fuzzy modeling in Mial Area, Central Iran [Volume 11, Issue 1, 2020, Pages 99-117]
Hemati Ahooi, H.R.
Optimizing Extreme Learning Machine Algorithm using Particle Swarm Optimization to Estimate Iron Ore Grade [Volume 12, Issue 2, 2021, Pages 397-411]
Hemmatian, M.
The impact of poor cementing casing damage: A numerical simulation study [Volume 6, Issue 1, 2015, Pages 41-53]
Hemmati Chegeni, M.
Interactional effects of bubble size, particle size, and collector dosage on bubble loading in column flotation [Volume 9, Issue 1, 2018, Pages 107-116]
Heshami, M.
Effect of thermal treatment on specific rate of breakage of manganese ore [Volume 9, Issue 2, 2018, Pages 339-348]
Heydarnoori, V.
Physical modelling of caving propagation process and damage profile ahead of the cave-back [Volume 11, Issue 4, 2020, Pages 1047-1058]
Heydartaemeh, M. R.
An innovative application of (NiXZnX–X Fe2O4) Mineral nanoparticles for adsorption of Malachite green dye from wastewater effluents [Volume 9, Issue 1, 2018, Pages 143-152]
Hezarkhani, A.
Selection of new exploration targets using lithogeochemical data obtained for Taknar deposit located in NE of Iran [Volume 6, Issue 1, 2015, Pages 11-20]
Hezarkhani, A.
A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]
Hezarkhani, A.
A comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran [Volume 9, Issue 4, 2018, Pages 917-940]
Hezarkhani, A.
Identification of geochemical anomalies associated with Cu mineralization by applying spectrum-area multi-fractal and wavelet neural network methods in Shahr-e-Babak mining area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 49-73]
Hezarkhani, A.
Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]
Hezarkhani, A.
Application of fractal modeling to delineate alteration zones and lithological units in Masjed-Daghi Cu-Au porphyry deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 339-356]
Hezarkhani, A.
Delineation of alteration zones based on artificial neural networks and concentration-volume fractal methods in the hypogene zone of porphyry copper-gold deposit, Masjed-Daghi, East Azerbaijan Province, Iran [Volume 10, Issue 4, 2019, Pages 883-901]
Hezarkhani, A.
A Comparative Study of SVM and RF Methods for Classification of Alteration Zones Using Remotely Sensed Data [Volume 11, Issue 1, 2020, Pages 49-61]
Hezarkhani, A.
Delineation of Alteration Zones Based on Wavelet Neural Network (WNN) and Concentration–Volume (C-V) Fractal Methods in the Hypogene Zone of Porphyry Copper Deposit, Shahr-e-Babak District, SE Iran [Volume 11, Issue 4, 2020, Pages 1173-1190]
Hezarkhani, A.
Investigation of Geochemical Correlation Between Radioactive and Rare Earth Elements: Case Study of Baghak Mine, NE Iran [Volume 12, Issue 2, 2021, Pages 569-587]
Hezarkhani, Ardeshir
A Comparative Analysis of Artificial Neural Network (ANN) and Gene Expression Programming (GEP) Data-driven Models for Prospecting Porphyry Cu Mineralization; Case Study of Shahr-e-Babak Area, Kerman Province, SE Iran [Volume 15, Issue 2, 2024, Pages 761-790]
Hibti, M.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Hodjatoleslami, H
Implementation of flotation and gravity separation, to process Changarzeh sulfide-oxide lead ore [Volume 3, Issue 2, 2012, Pages 79-87]
Honarmand, M.
Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]
Honarmand, M.
Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]
Honarmand, M.
Robust Principal Component Analysis and Fractal Methods to Delineate Mineralization-Related Hydrothermally-Altered Zones from ASTER Data: A Case Study of Dehaj Terrain, Central Iran [Volume 11, Issue 4, 2020, Pages 1023-1037]
Honarmand, M.
Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]
Honarmand, M.
Cadmium Oxide Nanoparticles as A Novel Photo-Catalyst for Degradation of Ciprofloxacin Antibiotic in Aqueous Media [Volume 13, Issue 1, 2022, Pages 155-164]
Honarvar, M.
Evaluation of Fractal Variance-Distance Model in Identifying Geochemical Anomalies of Calamine Mehdiabad Mining Complex, Central Iran [Volume 12, Issue 1, 2021, Pages 45-62]
Hong, Ryo Myong
Platform Motion at Lower Loading Station in Trucklift Slope Hoisting System with Varying Profile of Track [Volume 14, Issue 1, 2023, Pages 66-77]
Hood, M.
A state-of-the-art review of mechanical rock excavation technologies [Volume 1, Number 1, 2010]
Hoseein Morshedy, A.
Adaptive Multi-Size Block Modeling for Mineral Resources and Ore Reserves Evaluation [Volume 12, Issue 2, 2021, Pages 339-350]
Hoseini, Seyyed M.
A quantitative model for evaluation and classification of blastings in open-pit mines [Volume 9, Issue 1, 2018, Pages 127-141]
Hoseinie, Seyed H.
Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]
Hoseinie, Seyed Hadi
Reliability-based maintenance scheduling of powered supports in Tabas mechanized coal mine [Volume 5, Issue 2, 2014, Pages 113-120]
Hossaini, M. F.
Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]
Hosseini, A.
Determination of a suitable extraction equipment in mechanized longwall mining in steeply inclined coal seams using fuzzy analytical hierarchy method (Case study: Hamkar coal mine, Iran) [Volume 8, Issue 3, 2017, Pages 487-499]
Hosseini, A.
Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]
Hosseini, A.
Applying a Technical-Economic Approach to Calculate a Suitable Panel Width for Longwall Mining Method [Volume 12, Issue 1, 2021, Pages 113-126]
Hosseini, Ali
Prediction of Roof Failure in Pre-driven Entries and Selecting a Suitable Type of Recovery Room Method in Longwall Mining [Volume 15, Issue 1, 2024, Pages 223-237]
Hosseini, M.
Effect of temperature as well as heating and cooling cycles on rock properties [Volume 8, Issue 4, 2017, Pages 631-644]
Hosseini, M.
Numerical modeling of hydraulic fracturing in carbonate rocks of Bangestan reservoir [Volume 9, Issue 1, 2018, Pages 117-126]
Hosseini, M.
Effects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone) [Volume 9, Issue 2, 2018, Pages 379-391]
Hosseini, M.
Effect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study) [Volume 10, Issue 1, 2019, Pages 257-270]
Hosseini, M.
Effects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar [Volume 10, Issue 4, 2019, Pages 967-978]
Hosseini, M.
Method of Grading Subway Stations Based on Evacuation Capability: A Quantitative Method [Volume 11, Issue 2, 2020, Pages 587-609]
Hosseini, M.
A Correlation for Estimating LCPC Abrasivity Coefficient using Rock Properties [Volume 11, Issue 3, 2020, Pages 799-808]
Hosseini, M.
Experimental Study of Effect of Glass Fibres on Properties of Concrete Containing Micro-silica and Limestone Powder [Volume 12, Issue 3, 2021, Pages 895-906]
Hosseini, M.
Effect of Acid Rain on Physical and Mechanical Properties of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 1, 2022, Pages 185-200]
Hosseini, M.
CFD-based Modeling of Sarin Gas Dispersion in a Subway Station–A Hypothetical Scenario [Volume 13, Issue 1, 2022, Pages 235-251]
Hosseini, M.
Effect of Glass and Polypropylene Hybrid Fibers on Mode I, Mode II, and Mixed-Mode Fracture Toughness of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 2, 2022, Pages 559-577]
Hosseini, Mehdi
Effect of Acidic Water on Physico-Mechanical Properties of Concrete Containing Micro-Silica [Volume 14, Issue 2, 2023, Pages 653-666]
Hosseini, N.
A field investigation of application of digital terrestrial photogrammetry to characterize geometric properties of discontinuities in open-pit slopes [Volume 8, Issue 3, 2017, Pages 455-465]
Hosseini, Seyed Aliakbar
Compressional and Shear Interval Velocity Modeling to Determine Formation Pressures in an Oilfield of SW Iran [Volume 13, Issue 3, 2022, Pages 851-873]
Hosseini, Seyyede Atefeh
Reductive leaching of pyrolusite using orange peel as a reducing agent [Volume 14, Issue 4, 2023, Pages 1307-1319]
Hosseini, S. Hadi
A laboratory study of rock properties affecting the penetration rate of pneumatic top hammer drills [Volume 5, Issue 1, 2014, Pages 25-34]
Hosseini, S.M.A
Development of a new creep testing equipment to obtain long-term deformation parameters of salt rocks [Volume 3, Issue 1, 2012, Pages 27-32]
Hosseini Alaee, N.
A 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks [Volume 11, Issue 2, 2020, Pages 467-480]
Hosseini Nasab, M.
A New Approach for Obtaining Settling Velocity in a Thickener Using Statistical Regression: A Case Study [Volume 7, Issue 1, 2016, Pages 47-56]
Hosseini Nasab, M.
Dissolution of Nickel and Cobalt from Iron-Rich Laterite Ores Using Different Organic Acids [Volume 11, Issue 3, 2020, Pages 779-797]
Hosseini Nasab, M.
Direct and Indirect Bio-Leaching of Co and Ni from an Iron-Rich Laterite Ore using Delftia Acidovorans and Acidithiobacillus Ferrooxidans [Volume 12, Issue 2, 2021, Pages 471-489]
Hosseinjanizadeh, M.
Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]
Hosseinjani Zadeh, M.
Sub-pixel classification of hydrothermal alteration zones using a kernel-based method and hyperspectral data; A case study of Sarcheshmeh Porphyry Copper Mine and surrounding area, Kerman, Iran [Volume 8, Issue 4, 2017, Pages 555-565]
Hosseinzadeh, M.
Mineralogical and physical beneficiation studies for iron extraction from Bardaskan titanomagnetite placer deposit [Volume 8, Issue 2, 2017, Pages 191-201]
Hung, N. Ph.
Study on an Online Vibration Measurement System for Seismic Waves Caused by Blasting for Mining in Vietnam [Volume 12, Issue 2, 2021, Pages 313-325]
Hussain, S.
Analysis and Forecast of Mining Accidents in Pakistan [Volume 11, Issue 4, 2020, Pages 967-976]
Hussain, S.
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Hussain, Syed Kh.
Application of Machine Learning Models for Predicting Rock Fracture Toughness Mode-I and Mode-II [Volume 13, Issue 2, 2022, Pages 465-480]
Hussain, Syed Khaliq
Experimental Evaluation and Discrete Element Modeling of Shale Delamination Mechanism [Volume 14, Issue 1, 2023, Pages 259-276]
Hussein, Ahmed Wagih
Implementation of Remote Sensing Techniques in Structural and Lithological Mapping of Northwestern Margin of Red Sea, Egypt [Volume 14, Issue 2, 2023, Pages 389-411]
I
Ibrahim, M.
Optimization of Process Parameters for Enhanced Up-gradation of Qilla Saifullah Copper ore through Froth Floatation Technique [Volume 12, Issue 3, 2021, Pages 633-649]
Idris, M. Adebayo
Stochastic Stability Analysis of Tunnels Considering Randomness of Rock Mass Properties [Volume 12, Issue 4, 2021, Pages 1123-1141]
Ifelola, O.E.
Evaluation of background geochemical speciation of heavy metals in overburden topsoil of bituminous sand deposit area, Ondo state, Nigeria [Volume 10, Issue 4, 2019, Pages 869-882]
Igder, A
Box-Behnken Design of Experiments Investigation forAdsorption of Cd2+ onto carboxymethyl Chitosan Magnetic Nanoparticles [Volume 3, Issue 1, 2012, Pages 51-59]
Imamalipour, A.
Application of Fuzzy Gamma Operator to Generate Mineral Prospectivity Mapping for Cu-Mo Porphyry Deposits (Case Study: Kighal-Bourmolk Area, Northwestern Iran) [Volume 13, Issue 1, 2022, Pages 129-153]
Imamalipour, Ali
Application of Fuzzy Gamma Operator for Mineral Prospectivity Mapping, Case Study: Sonajil Area [Volume 14, Issue 3, 2023, Pages 981-997]
Imam Ali Pour, A.
Estimation of Pb and Zn Elements using Adaptive Neuro-Fuzzy Inference System (Case study: Gerde Kooh area, north of Yazd) [Volume 13, Issue 2, 2022, Pages 449-464]
Islam, Amber
3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]
Ismael, Ashraf
Prediction of Iron Ore Grade using Artificial Neural Network, Computational Method, and Geostatistical Technique at El-Gezera Area, Western Desert, Egypt [(Articles in Press)]
J
Jadoon, Khan Gul
Analysis of Granite Failure Modes and Energy Conversion under Uniaxial Compression at Various Temperatures [Volume 14, Issue 2, 2023, Pages 493-506]
Jafari, A.
Estimation of groundwater inflow situation using fuzzy logic: a case study (Beheshtabad water conveying tunnel, Iran) [Volume 7, Issue 2, 2016, Pages 229-238]
Jafari, A.
Robust production scheduling in open-pit mining under uncertainty: a box counterpart approach [Volume 8, Issue 2, 2017, Pages 255-267]
Jafari, A.
Support Analysis of Main Tunnels in Tabas Mechanized Parvadeh Mine at Intersection with Coal Seam [Volume 12, Issue 3, 2021, Pages 711-724]
Jafari, H.
Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]
Jafari, M. R.
Application of Power-Law Frequency Fractal Model for Recognition of Vertical Cu Distribution in Milloieh Porphyry Deposit, SE Iran [Volume 11, Issue 2, 2020, Pages 555-562]
Jafari, M.R.
Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]
Jafarnejad, A
The effect of price changes on optimum cut-off grade of different open-pit mines [Volume 3, Issue 1, 2012, Pages 61-68]
Jafarpour, A.
Optimal production strategy of bimetallic deposits under technical and economic uncertainties using stochastic chance-constrained programming [Volume 8, Issue 3, 2017, Pages 475-485]
Jafarpour, A.
Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]
Jafarpour, A.
A Modified Schimazek’s F-abrasiveness Factor for Evaluating Abrasiveness of Andesite Rocks in Rock Sawing Process [Volume 11, Issue 2, 2020, Pages 563-575]
Jafarpour, A.
A Hybrid Fuzzy MCDM Approach to Determine an Optimal Block Size in Open-Pit Mine Modeling: a Case Study [Volume 11, Issue 2, 2020, Pages 611-627]
Jafarpour, Amir
Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]
Jahangiri, M.
Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]
Jahangiri, Moharram
Machine Learning Predictive Approaches for Cu-Au Mineral prospectivity Map in Sonajil, NW of Iran: an Improvement by a Bayesian Semi-supervised Algorithm [Volume 14, Issue 4, 2023, Pages 1321-1342]
Jahani, M.
Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills [Volume 2, Issue 1, 2011]
Jahani Chegeni, M.
Combined DEM and SPH simulation of ball milling [Volume 10, Issue 1, 2019, Pages 151-161]
Jahani Chegeni, M.
An Investigation on Effect of Shell Liner Type on Performance of Industrial SAG Mills Using DEM [Volume 11, Issue 2, 2020, Pages 387-404]
Jahani Chegeni, M.
Investigation of Effect of Number of Lifters on Performance of Pilot-Scale SAG Mills Using Discrete Element Method [Volume 11, Issue 3, 2020, Pages 675-693]
Jahani Chegeni, M.
Determining an Appropriate range for the Number of Cuboid Lifters in Ball Mills using DEM [Volume 12, Issue 3, 2021, Pages 845-862]
Jahani Chegeni, Mohammad
Bio-flotation of Chalcopyrite using Halophilic Bacteria Separately and Their Combination as Pyrite bio-Depressant [Volume 13, Issue 4, 2022, Pages 1119-1138]
Jahani Chegeni, Mohammad
Investigating possibility of replacing some chemical reagents used in sulfide copper flotation with halophilic bacteria [Volume 14, Issue 1, 2023, Pages 243-258]
Jahani Chegeni, Mohammad
Effect of Stable Nano-microbubbles on Sulfide Copper Flotation and Reduction of Chemicals Dosage [Volume 15, Issue 1, 2024, Pages 261-283]
Jahankhah, H.
A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]
Jahanmiri, shirin
Developing GEP tree‑based, Neuro‑swarm, and whale optimization models for evaluating Groundwater Seepage into Tunnels: A Case Study [(Articles in Press)]
Jahanmiri, Shirin
Failure Mechanism of Rock Pillar Containing Two Edge Notches: Experimental Test and Numerical Simulation [Volume 14, Issue 3, 2023, Pages 961-971]
Jahantigh, Moslem
Mineral Prospectivity modeling with airborne geophysics and geochemistry data, A case study of Shahr-e-Babak study area, southeastern Iran [(Articles in Press)]
Jalali, Seyed M. E
3D stochastic rock fracture modeling related to strike-slip faults [Volume 6, Issue 2, 2015, Pages 169-181]
Jalali, Seyed M. E.
Probabilistic analysis of stability of chain pillars in Tabas coal mine in Iran using Monte Carlo simulation [Volume 7, Issue 1, 2016, Pages 25-35]
Jalali, Seyed M. E.
Airflow inside tunnel boring machine: A numerical study and an experimental verification [Volume 10, Issue 3, 2019, Pages 623-632]
Jalali, Seyed M. E.
Stability Analysis of Salt Cavern Gas Storage Using 2D Thermo-Hydro-Mechanical Finite-Element Software [Volume 11, Issue 1, 2020, Pages 77-97]
Jalali, Seyed Mohammad Esmaeil
Numerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: A case study of Bakhtiary Dam of Iran [Volume 4, Issue 1, 2013, Pages 15-26]
Jalali, S.M.E
Development of a new creep testing equipment to obtain long-term deformation parameters of salt rocks [Volume 3, Issue 1, 2012, Pages 27-32]
Jalalifar, H
Estimating the deformation modulus of jointed rock mass under multilateral loading condition using analytical methods [Volume 2, Issue 2, 2011, Pages 146-156]
Jalalifar, H.
Extension of Excavation Damaged Zone Due to Longwall Working Effect [Volume 7, Issue 1, 2016, Pages 13-24]
Jalalifar, H.
Applying a Technical-Economic Approach to Calculate a Suitable Panel Width for Longwall Mining Method [Volume 12, Issue 1, 2021, Pages 113-126]
Jalalifar, Hossein
Prediction of Roof Failure in Pre-driven Entries and Selecting a Suitable Type of Recovery Room Method in Longwall Mining [Volume 15, Issue 1, 2024, Pages 223-237]
Jalili, Hadi
Satellite Image Processing: Application for Alteration Separation based on U-Statistic Method in Zafarghand Porphyry System (Iran) [Volume 15, Issue 2, 2024, Pages 667-681]
Jamali, F.
Modeling of Induced Polarization and Resistivity Data for Prospecting and Exploration of Polymetallic Deposit in Kaboudan Area, East of Iran [Volume 12, Issue 3, 2021, Pages 693-710]
Jamali, H.
Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]
Jamshidi, M.
UPL determination of multi-element deposits with grade uncertainty using a new block economic value calculation approach [Volume 9, Issue 1, 2018, Pages 61-72]
Jamshid Moghadam, Hadi
Classification of ASTER Data by Neural Network to Mapping Alterations Related to Copper and Iron Mineralization in Birjand [Volume 15, Issue 2, 2024, Pages 649-665]
Janfada, M.
Investigation of parameters affecting desilication of diasporic bauxite in Jajarm mine by thermo-chemical treatment [Volume 8, Issue 1, 2017, Pages 75-81]
Jannesar Malakooti, Sajjad
Mineralogy and Characterisation Studies Aimed at Coal Desulfurization Process on Iran’s Largest Coalfield [Volume 14, Issue 1, 2023, Pages 277-293]
Jannesar Malakooti, Sajjad
Bioflotation and Bioleaching as an Alternative Method for Desulphurization and Ash Reduction in Tabas Coal [Volume 15, Issue 2, 2024, Pages 581-595]
Javadi, A.R.
Carnallite Flotation of Khur Biabanak Potash Complex using Kimiaflot619 as a New Collector [Volume 12, Issue 3, 2021, Pages 815-823]
Javadi, Morteza
Effect of Tunnel Location Related to Inclined Coal Strata on Excavation-Induced Displacements of Mine Tunnel: Application of Calibrated Numerical Model [Volume 15, Issue 1, 2024, Pages 203-221]
Javadi, Morteza
Sustainability Analysis of Waste Dump in Mine No. 4 of Golgohar, Sirjan, for Purpose of Increasing Waste Dump Volume [Volume 14, Issue 4, 2023, Pages 1373-1391]
Javaheri, A.
Extension of Excavation Damaged Zone Due to Longwall Working Effect [Volume 7, Issue 1, 2016, Pages 13-24]
Javani, D.
Development of a mechanical earth model in an Iranian off-shore gas field [Volume 7, Issue 1, 2016, Pages 37-46]
Javanshir, M.
Application of Schmidt rebound number for estimating rock strength under specific geological conditions [Volume 1, Number 2, 2010]
Javanshir, S.
Solvent Extraction of Zinc from a Bioleaching Solution by Modification of D2EHPA: Optimization and Thermodynamic Studies [Volume 12, Issue 1, 2021, Pages 253-269]
Javed, A.
A review of Rock Burst’s Experimental Progress, Warning, Prediction, Control and Damage Potential Measures [Volume 11, Issue 1, 2020, Pages 31-48]
Javid, Mostafa
Formation interface detection using Gamma Ray log: A novel approach [Volume 3, Issue 1, 2012, Pages 41-50]
Jayanthu, Singam
Application of machine learning techniques in slope stability analysis: A comprehensive overview [(Articles in Press)]
Jayanthu, Singam
Applications of IoT Framework for Underground Mine Safety: Limitations and Solutions [(Articles in Press)]
Jebutu, Victor Afolabi
Granite Downstream Production Dependent Size and Profitability Assessment: an application of Mathematical-based Artificial Intelligence Model and WipFrag Software [Volume 15, Issue 2, 2024, Pages 497-515]
Jennifer, Praveena Das
Finite Element Analysis of Seismic Hazard in Post-mining Environments of Closed Underground Hard Rock Mines [Volume 15, Issue 1, 2024, Pages 73-96]
Jha, S. Kumar
Impact Assessment of Mining Activities on Surface and Sub-Surface Water Condition of Ramgarh, Jharkhand, India using Geospatial Techniques [Volume 12, Issue 3, 2021, Pages 651-665]
Jianhua, Z.
Ultimate Pit Limit Optimization using Boykov-Kolmogorov Maximum Flow Algorithm [Volume 12, Issue 1, 2021, Pages 1-13]
Jiryaee, F.
Reliability Analysis of Surface Settlement caused by Mechanized Tunneling-a Case Study [Volume 13, Issue 1, 2022, Pages 201-216]
Jiskani, I. M.
Fault orientation modeling of Sonda- Jherruck coalfield, Pakistan [Volume 10, Issue 2, 2019, Pages 305-313]
Jiskani, I. M.
Comparative Analysis of Coal Miner’s Fatalities by Fuzzy Logic [Volume 12, Issue 1, 2021, Pages 77-87]
Jodeiri Shokri, B.
Probabilistic Prediction of Acid Mine Drainage Generation Risk Based on Pyrite Oxidation Process in Coal Washery Rejects - A Case Study [Volume 12, Issue 1, 2021, Pages 127-137]
Jodeiri Shokri, B.
Prediction of Acid Mine Drainage Generation Potential of A Copper Mine Tailings Using Gene Expression Programming-A Case Study [Volume 11, Issue 4, 2020, Pages 1127-1140]
Jodeiri Shokri, B.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Jodeiri Shokri, B.
Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]
Jon, Sung Il
Determination of Mechanical Parameters of Anthracite Coal using Flying Squirrel Search Algorithm with Timber Load and Displacement Data [Volume 15, Issue 1, 2024, Pages 21-40]
Jozanikohan, G.
Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]
Jozanikohan, G.
Geochemical Study of Rare Earth Elements Content in Tabas Coal Ash, Parvadeh Coal Mine [Volume 12, Issue 4, 2021, Pages 1143-1153]
Junaid, Muhammad
The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]
Junaid, Muhammad
3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]
Junaid, Muhammad
Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]
Juneja, Gaurav
Numerical Analysis of Square and Circular Skirted Footings Placed on Sand using PLAXIS 3D Software [Volume 13, Issue 4, 2022, Pages 1049-1066]
Jurković, J.
Gold, Silver and Iron in Iron Oxy-hydroxide Precipitate Formed in Process of Acid Mine Drainage [Volume 11, Issue 2, 2020, Pages 335-346]
K
Kaboli, Seyed A.R.
Optimal Earthmoving Fleet Size for Minimising Emissions and Cost [Volume 11, Issue 4, 2020, Pages 949-965]
Kaboli, Seyed M.
Optimal Earthmoving Fleet Size for Minimising Emissions and Cost [Volume 11, Issue 4, 2020, Pages 949-965]
Kadioğlu, S.
Evaluation of Fractal Variance-Distance Model in Identifying Geochemical Anomalies of Calamine Mehdiabad Mining Complex, Central Iran [Volume 12, Issue 1, 2021, Pages 45-62]
Kadkhodaei, M. H.
Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties [Volume 10, Issue 4, 2019, Pages 917-928]
Kadyamatimba, Armstrong
A Rule-based Expert System for Selection of Rehabilitation Strategies for Abandoned Mines in South Africa [Volume 14, Issue 4, 2023, Pages 1171-1181]
Kafilzadeh, F.
Optimization of Chalcopyrite Bioleaching using Two Different Adaptation Methods: Top-Down and Bottom-Up [Volume 12, Issue 4, 2021, Pages 1055-1064]
Kakaie, R.
3D stochastic rock fracture modeling related to strike-slip faults [Volume 6, Issue 2, 2015, Pages 169-181]
Kakaie, R.
Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]
Kakaie, R.
Application of Sequential Gaussian Conditional Simulation to Underground Mine Design Under Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 695-709]
Kakaie, Reza
A new algorithm for optimum open pit design: Floating cone method III [Volume 2, Issue 2, 2011, Pages 118-125]
Kamali, Gh.R.
Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]
Kamel, Eman M.
Geological Mapping and Facies Characterization of Miocene Evaporites along Central-eastern Margin of Gulf of Suez Rift by Remote Sensing Techniques [Volume 15, Issue 1, 2024, Pages 151-173]
Kamkar Rohani, A.
Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method [Volume 8, Issue 1, 2017, Pages 103-110]
Kamkar Rouhani, A.
GIS modelling for Au-Pb-Zn potential mapping in Torud-Chah Shirin area-Iran [Volume 1, Number 1, 2010]
Kamkar Rouhani, A.
Dimensionality analysis of subsurface structures in magnetotellurics using different methods (a case study: oil field in Southwest of Iran) [Volume 7, Issue 1, 2016, Pages 119-126]
Kamkar Rouhani, A.
Using a combination of genetic algorithm and particle swarm optimization algorithm for GEMTIP modeling of spectral-induced polarization data [Volume 10, Issue 2, 2019, Pages 493-505]
Kamkar Rouhani, A.
Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]
Kamkar Rouhani, A.
An Exploration Model for A Gold Deposit in Kervian Area, Kurdistan Province, Iran, using a Combination of Geophysical Results with Geological Information and Other Exploratory Data [Volume 12, Issue 2, 2021, Pages 413-424]
Kamkar Rouhani, A.
Modeling of Induced Polarization and Resistivity Data for Prospecting and Exploration of Polymetallic Deposit in Kaboudan Area, East of Iran [Volume 12, Issue 3, 2021, Pages 693-710]
Kamkar Rouhani, Abolghasem
Forward Modeling of Frequency-domain Helicopter-borne Electromagnetic Data using an Improved Finite Difference Method [Volume 13, Issue 4, 2022, Pages 1067-1089]
Kamkar Rouhani, Abulghasem
A GIS-based weights-of-evidence model for mineral potential mapping of hydrothermal gold deposits in Torbat-e-Heydarieh area [Volume 5, Issue 2, 2014, Pages 79-89]
Kamkar-Rouhani, Abolghasem
Karstic water exploration using the Schlumberger VES and dipole–dipole resistivity profiling surveys in the Tepal area, west of Shahrood, Iran [Volume 5, Issue 1, 2014, Pages 1-12]
Kamkar Ruhani, A.
Prediction of mineral deposit model and identification of mineralization trend in depth using frequency domain of surface geochemical data in Dalli Cu-Au porphyry deposit [Volume 6, Issue 2, 2015, Pages 225-236]
Kamran, M.
A Probabilistic Approach for Prediction of Drilling Rate Index using Ensemble Learning Technique [Volume 12, Issue 2, 2021, Pages 327-337]
Kamran, M.
A Stochastic Model Upgrading Gold Content in Cyanide Leaching using Monte Carlo Simulation [Volume 12, Issue 3, 2021, Pages 619-631]
Kamran, M.
A State of the art Catboost-Based T-Distributed Stochastic Neighbor Embedding Technique to Predict Back-break at Dewan Cement Limestone Quarry [Volume 12, Issue 3, 2021, Pages 679-691]
Kamran, Muhammad
The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]
Karami, Morteza
Real-Scale Numerical Analyzing Dynamic Process of TBM Boring in Jointed Rock; a Case Study: Kerman Water Conveyance Tunnel in Iran [Volume 13, Issue 3, 2022, Pages 643-666]
Karamoozian, M.
Processing of Alborz Markazi coal tailings using column flotation [Volume 2, Issue 1, 2011]
Karamoozian, M.
Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching [Volume 8, Issue 4, 2017, Pages 523-537]
Karamoozian, M.
Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]
Karamoozian, M.
Modelling and optimization of digestion efficiency of bauxite in Bayer process: Iran Alumina company [Volume 10, Issue 3, 2019, Pages 799-809]
Karamoozian, M.
An Experimental and CFD Investigation on Effect of Initial Bubble Diameter on its Rise Velocity Profile in A Laboratory-Scale Flotation Column Cell [Volume 12, Issue 4, 2021, Pages 1089-1102]
Karamoozian, Mohammad
Investigation on selective rhenium leaching from molybdenite roasting flue dusts [Volume 4, Issue 2, 2013, Pages 77-82]
Karamoozian, Mohammad
Recovery of Iron from Bauxite Red Mud by Reduction Roasting Method [Volume 14, Issue 4, 2023, Pages 1295-1305]
Karamoozian, Mohammad
Effect of Stable Nano-microbubbles on Sulfide Copper Flotation and Reduction of Chemicals Dosage [Volume 15, Issue 1, 2024, Pages 261-283]
Karamouzian, M.
Pre-treatment of toxic element and cationic dye onto natural biomass: characterization and optimization [Volume 10, Issue 3, 2019, Pages 649-658]
Karekal, Sh.
DPM flow pattern of LHD in underground mines with different ventilation conditions [Volume 10, Issue 2, 2019, Pages 315-326]
Kargar, A.
Analytical analysis of ultimate ground pressure on tunnel support system [Volume 6, Issue 2, 2015, Pages 151-157]
Kargar, A. Reza
Semi-Analytical Study of Settlement of Two Interfering Foundations Placed on a Slope [Volume 12, Issue 2, 2021, Pages 457-470]
Kargar, A.R.
Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]
Kargar, M.
Optimization of Chalcopyrite Bioleaching using Two Different Adaptation Methods: Top-Down and Bottom-Up [Volume 12, Issue 4, 2021, Pages 1055-1064]
Kargaran Bafghi, F.
Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]
Karimi, A.
Integrating Geophysical Attributes with New Cuckoo Search Machine-Learning Algorithm to Estimate Silver Grade Values–Case Study: Zarshouran Gold Mine [Volume 11, Issue 3, 2020, Pages 865-879]
Karimi, P.
A finite element model to simulate magnetic field distribution and laboratory studies in wet low-intensity magnetic separator [Volume 10, Issue 3, 2019, Pages 717-727]
Karimi, Saeid
Reductive leaching of pyrolusite using orange peel as a reducing agent [Volume 14, Issue 4, 2023, Pages 1307-1319]
Karimi Gogheri, Valiallah
Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]
Karimi Javid, H.
Study of Rock Pillar Failure Consisting of Non-Persistent Joint using Experimental Test and Fracture Analysis Code in Two Dimensions [Volume 12, Issue 1, 2021, Pages 163-179]
Karimi Nasab, Saeed
Estimating the deformation modulus of jointed rock mass under multilateral loading condition using analytical methods [Volume 2, Issue 2, 2011, Pages 146-156]
Karimi Shahraki, Behrouz
Mineralogy and Characterisation Studies Aimed at Coal Desulfurization Process on Iran’s Largest Coalfield [Volume 14, Issue 1, 2023, Pages 277-293]
Karra, Ramchandar
Analysis of concentration of ambient particulate matter in the surrounding area of an opencast coal mine using machine learning techniques [(Articles in Press)]
Karrech, A.
Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]
Kashani, Reza Hassanpour
A Process Mineralogy Based Approach for Arsenic Removal from Copper Concentrate in Cu – Mo Flotation Circuit [Volume 14, Issue 3, 2023, Pages 929-944]
Kasomo, R. Muthui
Ultimate Pit Limit Optimization using Boykov-Kolmogorov Maximum Flow Algorithm [Volume 12, Issue 1, 2021, Pages 1-13]
Kaunda, R.
Blast Design for Improved Productivity using a Modified Available Energy Method [Volume 11, Issue 3, 2020, Pages 643-659]
Kazem Alilou, S.
Geostatistical Modeling of Electrical Resistivity Tomography for Imaging Porphyry Cu Mineralization in Takht-e-Gonbad Deposit, Iran [Volume 11, Issue 1, 2020, Pages 143-159]
Kazemi, Fatemeh
A Process Mineralogy Based Approach for Arsenic Removal from Copper Concentrate in Cu – Mo Flotation Circuit [Volume 14, Issue 3, 2023, Pages 929-944]
Kazempour Osalou, ali
Urban Tunneling Risk Management: Ground Settlement Assessment through Proportional Hazards Modeling [(Articles in Press)]
Kazemzadeh, E. A.
Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]
Kazlagić, A.
Gold, Silver and Iron in Iron Oxy-hydroxide Precipitate Formed in Process of Acid Mine Drainage [Volume 11, Issue 2, 2020, Pages 335-346]
Kegang, Li
Analysis of Granite Failure Modes and Energy Conversion under Uniaxial Compression at Various Temperatures [Volume 14, Issue 2, 2023, Pages 493-506]
Kegang, Li
Exploring Ground Behavior in Underground Excavations Under Squeezing Stress Conditions [(Articles in Press)]
Kelidari, P.
Investigation of parameters affecting desilication of diasporic bauxite in Jajarm mine by thermo-chemical treatment [Volume 8, Issue 1, 2017, Pages 75-81]
Kemeng, M. P.
Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]
Kenioua, Achouak
Influence of Red Clay Minerals on Lead-induced Liver and Testicular Oxidative Stress and Histological Alteration in Rats [Volume 14, Issue 1, 2023, Pages 1-11]
Keshavazr Faraj Khah, Nasser
Compressional and Shear Interval Velocity Modeling to Determine Formation Pressures in an Oilfield of SW Iran [Volume 13, Issue 3, 2022, Pages 851-873]
Ketabi, A.
Negative impacts of mine exploitations on rural regions of Tekab Township [Volume 7, Issue 1, 2016, Pages 57-66]
Keynezhad, Anahita
Geometrical Analysis of Fractures and Mineralized Veins of Gazkhizan Copper Deposit in Semnan Province, Iran [Volume 14, Issue 1, 2023, Pages 197-216]
Kezzar, Mohamed
Statistical Analysis and Optimization of Drilling Process using Response Surface Methodology and Experimental Data [Volume 15, Issue 1, 2024, Pages 55-71]
Khademhosseini, O.
Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel) [Volume 8, Issue 1, 2017, Pages 111-130]
Khademi Hamidi, J.
Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]
Khademi Hamidi, J.
A Mathematical Model to Optimize Allocation Sequence in Dispatching Problem [Volume 11, Issue 1, 2020, Pages 185-192]
Khademi Hamidi, J.
A Numerical Investigation of TBM Disc Cutter Life Prediction in Hard Rocks [Volume 11, Issue 4, 2020, Pages 1095-1113]
Khademi Hamidi, Jafar
An Experimental Study on Water Saturation Effect on Rock Cutting Force of a Chisel Pick [Volume 14, Issue 2, 2023, Pages 577-600]
Khajeh Miry, Z.
Application of Probabilistic Clustering Algorithms to Determine Mineralization Areas in Regional-Scale Exploration Studies [Volume 11, Issue 4, 2020, Pages 1059-1078]
Khaleghi, M.
Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]
Khaleghparast, S.
Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]
Khalesi, Mohammad Reza
Role of Functional Groups in Selective Adsorption of Gold over Copper Cyano complexes by Activated Carbon: A DFT Study [Volume 13, Issue 3, 2022, Pages 891-901]
Khalesi, M. R.
Interactional effects of bubble size, particle size, and collector dosage on bubble loading in column flotation [Volume 9, Issue 1, 2018, Pages 107-116]
Khalesi, M. R.
An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]
Khalesi, M. R.
Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]
Khalesi, M. R.
Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]
Khalesi, M. R.
Investigation of Mechanism of Adsorption of Xanthate and Hydroxamate on Malachite [Volume 11, Issue 3, 2020, Pages 921-933]
Khalesi, M.R.
Prediction of effect of fine particle removal on efficiency of a spiral circuit by size-by-size partition curves [Volume 8, Issue 4, 2017, Pages 567-571]
Khalili, H.
Application of spectrum-volume fractal modeling for detection of mineralized zones [Volume 9, Issue 2, 2018, Pages 371-378]
Khalili, Sajjad
Evaluation the Effect of Blast Pattern on Post-Failure Rate around the Miyaneh-Ardabil Railway Tunnel [(Articles in Press)]
Khalkho, Ajay
Detection of Surface and Sub-surface Coal Mine Fire of Jharia Coalfields using Remotely Sensed and Ground Thermal Data [Volume 15, Issue 1, 2024, Pages 1-19]
Khalokakaei, R.
Comparison of golden section search method and imperialist competitive algorithm for optimization cut-off grade- case study: Mine No. 1 of Golgohar [Volume 6, Issue 1, 2015, Pages 63-71]
Khalokakaie, R
Selection of the best strategy for Iran's quarries: SWOT-FAHP method [Volume 3, Issue 1, 2012, Pages 1-13]
Khalokakaie, R.
Semi-quantitative environmental impact assessment and sustainability level determination of coal mining using a mathematical model [Volume 7, Issue 2, 2016, Pages 185-193]
Khalokakaie, R.
Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]
Khalokakaie, R.
A practical approach to open-pit mine planning under price uncertainty using information gap decision theory [Volume 9, Issue 2, 2018, Pages 527-537]
Khaloo, A. R
A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [Volume 6, Issue 1, 2015, Pages 73-93]
Khaloo Kakaie, R.
Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]
Khaloo Kakaie, R.
A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]
Khaloo Kakaie, R.
Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]
Khaloo Kakaie, R.
Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]
Khaloo Kakaie, R.
Dilution Risk Ranking in Underground Metal Mines using Multi-Attributive Approximation Area Comparison [Volume 11, Issue 4, 2020, Pages 977-989]
Khamis, Yahia ElSayed
Rate of Penetration Prediction in Drilling Operation in Oil and Gas Wells by K-nearest Neighbors and Multi-layer Perceptron Algorithms [Volume 14, Issue 3, 2023, Pages 755-770]
Khan, A.
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Khan, Asghar
Enhanced Geotechnical Methods for Evaluating Slope Stability in Unconsolidated Strata: A Comprehensive Analysis [(Articles in Press)]
Khan, Imran
Bearing Capacity Evaluation of Square Footing Resting on Reinforced Sand [Volume 14, Issue 3, 2023, Pages 813-824]
Khan, Irshad
Enhanced Geotechnical Methods for Evaluating Slope Stability in Unconsolidated Strata: A Comprehensive Analysis [(Articles in Press)]
Khan, M. Iftikhar
Optimization of Process Parameters for Enhanced Up-gradation of Qilla Saifullah Copper ore through Froth Floatation Technique [Volume 12, Issue 3, 2021, Pages 633-649]
Khan, N. Muhammad
Analysis and Forecast of Mining Accidents in Pakistan [Volume 11, Issue 4, 2020, Pages 967-976]
Khan, N. Muhammad
Optimization of Process Parameters for Enhanced Up-gradation of Qilla Saifullah Copper ore through Froth Floatation Technique [Volume 12, Issue 3, 2021, Pages 633-649]
Khan, N. Muhammad
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Khan, Naseer Muhammad
The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]
Khan, Naseer Muhammad
Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]
Khan, Zehra
Numerical Simulation of Piled-Raft Foundation in Cohesionless Soil using ABAQUS [Volume 14, Issue 4, 2023, Pages 1183-1203]
Khanchi, A. R.
Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]
Khandouzi, Gh.
Development of a New Experimental Technique for Dynamic Fracture Toughness Measurement of Rocks using Drop Weight Test [Volume 11, Issue 3, 2020, Pages 909-920]
Khandouzi, Ghorban
Soil Arching and Ground Deformation around Tunnels in Sandy Grounds: Review and New Insights [Volume 15, Issue 2, 2024, Pages 731-759]
Khani, Mohammad Reza
Recovery of Iron from Bauxite Red Mud by Reduction Roasting Method [Volume 14, Issue 4, 2023, Pages 1295-1305]
Khani, Mohammad Reza
Extracting alumina from a low-grade (shale) bauxite ore using a sintering process with lime-soda followed by alkali leaching [(Articles in Press)]
Khani, M. R.
Modelling and optimization of digestion efficiency of bauxite in Bayer process: Iran Alumina company [Volume 10, Issue 3, 2019, Pages 799-809]
Khanizadeh Bahabadi, Mohsen
Coupling discontinuous deformation analysis and displacement discontinuity method for simulating failure mechanism in geomaterials [(Articles in Press)]
Khaolukakaie, R.
Maintainability measure based on operating environment, a case study: Sungun copper mine [Volume 8, Issue 3, 2017, Pages 511-521]
Khaphaje, E.
Beneficiation of a low-grade iron ore by combination of wet low-intensity magnetic separation and reverse flotation methods [Volume 10, Issue 1, 2019, Pages 197-212]
Kharzi, R.
A Safe and Sustainable Development in a Hygiene and Healthy Company Using Decision Matrix Risk Assessment Technique: a case study [Volume 11, Issue 2, 2020, Pages 363-373]
Khettabi, Rym
Statistical Analysis and Optimization of Drilling Process using Response Surface Methodology and Experimental Data [Volume 15, Issue 1, 2024, Pages 55-71]
Kheyrandish, I.
A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]
Khochmane, Lakhdar
Statistical Analysis and Optimization of Drilling Process using Response Surface Methodology and Experimental Data [Volume 15, Issue 1, 2024, Pages 55-71]
Khodadadi, A.
Kinetics of Sphalerite Leaching by Sodium Nitrate in Sulfuric Acid [Volume 7, Issue 1, 2016, Pages 1-12]
Khodadadi, Ahmad
Predicting Arsenic Behavior in the Wastewater of Mouteh Gold Plant by Geochemical Modeling [Volume 4, Issue 1, 2013, Pages 57-65]
Khodadadi Bordboland, Reza
Extracting alumina from a low-grade (shale) bauxite ore using a sintering process with lime-soda followed by alkali leaching [(Articles in Press)]
Khodadadi Darban, A.
Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]
Khodadadi Darban, A.
Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]
Khodadadi Darban, A.
Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]
Khodadadi Darban, A.
Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]
Khodadadi Darban, A.
A finite element model to simulate magnetic field distribution and laboratory studies in wet low-intensity magnetic separator [Volume 10, Issue 3, 2019, Pages 717-727]
Khodadadi Darban, A.
Comparison of Copper Dissolution in Chalcopyrite Concentrate Bioleaching with Acidianus Brierleyi in Different Initial pH Values [Volume 11, Issue 3, 2020, Pages 753-764]
Khodadadi Darban, A.
A Proposed Biochemical Protocol to Isolate and Characterize Acidophilic Bacteria from Tailings Soil [Volume 11, Issue 4, 2020, Pages 1157-1171]
Khodadadi Darban, A.
Characterization of Leaching Feed and Residue of Mechanically Activated Sphalerite [Volume 12, Issue 4, 2021, Pages 1029-1040]
Khodaiari, A. A.
Robust production scheduling in open-pit mining under uncertainty: a box counterpart approach [Volume 8, Issue 2, 2017, Pages 255-267]
Khodayari, A. R.
Effects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone) [Volume 9, Issue 2, 2018, Pages 379-391]
Khodayari, A. R.
Effect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study) [Volume 10, Issue 1, 2019, Pages 257-270]
Khojamli, A.
Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]
Khorasani, E.
Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]
Khorasanizadeh, N.
An Experimental and CFD Investigation on Effect of Initial Bubble Diameter on its Rise Velocity Profile in A Laboratory-Scale Flotation Column Cell [Volume 12, Issue 4, 2021, Pages 1089-1102]
Khorram, F.
Limestone chemical components estimation using image processing and pattern recognition techniques [Volume 2, Issue 2, 2011, Pages 126-135]
Khorram, F.
Adaptive Multi-Size Block Modeling for Mineral Resources and Ore Reserves Evaluation [Volume 12, Issue 2, 2021, Pages 339-350]
Khoshdast, H.
A new chart-independent method for fast identification of control level of industrial processes using continuous data [Volume 8, Issue 2, 2017, Pages 203-213]
Khoshdast, H.
Effects of operating parameters on time-dependent ash entrainment behaviour of a sample coal flotation [Volume 8, Issue 3, 2017, Pages 337-357]
Khoshdast, H.
Adsorptive Study of Cadmium Removal from Aqueous Solution Using a Coal Waste Loaded with Fe3O4 Nanoparticles [Volume 13, Issue 2, 2022, Pages 527-545]
Khoshdast, Hamid
A parametric model for predicting cut point of hydraulic classifiers [Volume 5, Issue 1, 2014, Pages 47-54]
Khoshdast, Hamid
A model for predicting dynamic frothability index of dual-frother blends [Volume 6, Issue 1, 2015, Pages 119-124]
Khoshfarman Borji, Mahsa
A Novel Sustainable Multi-objective Optimization Model for Steel Supply Chain Design Considering Technical and Managerial Issues: a Case Study [Volume 14, Issue 1, 2023, Pages 295-319]
Khoshjavan, S.
Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]
Khosravi, M. H.
Influence of modeling material on undercut slope failure mechanism [Volume 8, Issue 4, 2017, Pages 645-662]
Khosravi, M. H.
Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]
Khosravi, M. H.
A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]
Khosravi, M. H.
Numerical analysis of slide-head-toppling failure [Volume 10, Issue 4, 2019, Pages 1001-1011]
Khosravi, M. H.
Development of a New Experimental Technique for Dynamic Fracture Toughness Measurement of Rocks using Drop Weight Test [Volume 11, Issue 3, 2020, Pages 909-920]
Khosravi, M. H.
Physical modelling of caving propagation process and damage profile ahead of the cave-back [Volume 11, Issue 4, 2020, Pages 1047-1058]
Khosravi, M. H.
Numerical Stability Analysis of Undercut Slopes Evaluated by Response Surface Methodology [Volume 12, Issue 1, 2021, Pages 31-43]
Khosravi, M. H.
Semi-Analytical Study of Settlement of Two Interfering Foundations Placed on a Slope [Volume 12, Issue 2, 2021, Pages 457-470]
Khosravi, M. H.
Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]
Khosravi, M.H.
Support Analysis of Main Tunnels in Tabas Mechanized Parvadeh Mine at Intersection with Coal Seam [Volume 12, Issue 3, 2021, Pages 711-724]
Khosravi, Mohammad Hossein
Soil Arching and Ground Deformation around Tunnels in Sandy Grounds: Review and New Insights [Volume 15, Issue 2, 2024, Pages 731-759]
Khosravi, Mohammad Hossein
Determination of the caving zone height using numerical and physical modeling based on the undercutting method, joint dip, and spacing [(Articles in Press)]
Khosravimanesh, Sh.
Study of Effect of Cooling/Lubricating Fluids, Machining Parameters, and Rock Mechanical Properties on Penetration Rate in Rock Drilling Process [Volume 12, Issue 3, 2021, Pages 825-843]
Khosravimanesh, Shahrokh
Studying Effects of Cooling/Lubricating Fluids, Machining Parameters, and Rock Mechanical Properties on Specific Energy in Rock Drilling Process [Volume 15, Issue 2, 2024, Pages 613-636]
Khounfais, Kamel
Statistical Analysis and Optimization of Drilling Process using Response Surface Methodology and Experimental Data [Volume 15, Issue 1, 2024, Pages 55-71]
Kianinia, Y.
Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]
Kianoush, Pooria
Compressional and Shear Interval Velocity Modeling to Determine Formation Pressures in an Oilfield of SW Iran [Volume 13, Issue 3, 2022, Pages 851-873]
Kianpour, M.
Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]
Kianpour, Mohammad Nabi
Delineation of Gold Exploration Targets based on Prospectivity Models through an Optimization Algorithm [Volume 15, Issue 2, 2024, Pages 597-611]
Kide, Yemane
Artificial Neural Network Modeling as an Approach to Limestone Blast Production Rate Prediction: a Comparison of PI-BANN and MVR Models [Volume 14, Issue 2, 2023, Pages 375-388]
Kim, Dong Il
Suitable Mining Method Selection using HFGDM-TOPSIS Method: a Case Study of an Apatite Mine [Volume 13, Issue 2, 2022, Pages 357-374]
Kim, Kwang Hyok
Platform Motion at Lower Loading Station in Trucklift Slope Hoisting System with Varying Profile of Track [Volume 14, Issue 1, 2023, Pages 66-77]
Kiyani, A.R.
Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]
Kohansal Ghadimvand, N.
Application of Power-Law Frequency Fractal Model for Recognition of Vertical Cu Distribution in Milloieh Porphyry Deposit, SE Iran [Volume 11, Issue 2, 2020, Pages 555-562]
Koken, E.
A Probability-Based Evaluation on Andesites for Their Use as Cladding Stone [Volume 13, Issue 1, 2022, Pages 1-13]
Koken, Ekin
Estimating Uniaxial Compressive Strength of Pyroclastic Rocks Using Soft Computing Techniques [(Articles in Press)]
Kolahi, S.
An Investigation on Effect of Shell Liner Type on Performance of Industrial SAG Mills Using DEM [Volume 11, Issue 2, 2020, Pages 387-404]
Kolahi, S.
Investigation of Effect of Number of Lifters on Performance of Pilot-Scale SAG Mills Using Discrete Element Method [Volume 11, Issue 3, 2020, Pages 675-693]
Kolahi, S.
Determining an Appropriate range for the Number of Cuboid Lifters in Ball Mills using DEM [Volume 12, Issue 3, 2021, Pages 845-862]
Kolar, M.
Gold, Silver and Iron in Iron Oxy-hydroxide Precipitate Formed in Process of Acid Mine Drainage [Volume 11, Issue 2, 2020, Pages 335-346]
Koleini, Seyed M. J.
An applied comparison between conventional pre-dispersed solvent extraction (PDSE) contactors and new dissolved nitrogen PDSE (DNPDSE) ones [Volume 6, Issue 2, 2015, Pages 159-168]
Koleini, Seyed M. J.
Kinetics of Sphalerite Leaching by Sodium Nitrate in Sulfuric Acid [Volume 7, Issue 1, 2016, Pages 1-12]
Koleini, Seyed M. J.
Mechanism of Zinc Complexation by Alkaline Ligands: A Molecular Modelling Study [Volume 13, Issue 2, 2022, Pages 421-430]
Koner, R.
Estimation of Optimum Geometric Configuration of Mine Dumps in Wardha Valley Coalfields in India: A Case Study [Volume 12, Issue 4, 2021, Pages 907-927]
Koner, Radhakanta
Internal Mine Dump Slope Stability and Failure Zone Identification using 3D Modelling [Volume 14, Issue 4, 2023, Pages 1105-1119]
Koneshloo, M.
Modelling of the kaolin deposits and reserve classification challenges of Charentes Basin, France [Volume 1, Number 1, 2010]
Koneshloo, M.
Permeability upscaling in fractured reservoirs using different optimized mother wavelets at each level [Volume 7, Issue 2, 2016, Pages 239-250]
Kor, M.
An investigation of the particle size effect on coal flotation kinetics using multivariable regression [Volume 1, Number 1, 2010]
Kotiyal, Krishna
Behavior of Horizontally Reinforced Stone Column in a Layered Soil: Enhancing Ground Improvement [Volume 15, Issue 2, 2024, Pages 537-555]
Kpeglo, David Okoh
Radiological Baseline Assessment of a Naturally Occurring Radioactive Material (NORM) Waste Disposal Facility in Ghana [Volume 14, Issue 1, 2023, Pages 33-46]
K S, Sreekeshava
Evaluation of Pressure-Settlement Response of Square Footing Rested on Sand Reinforced with Coir Geotextile [Volume 15, Issue 2, 2024, Pages 481-495]
Kulekci, G.
Experimental Investigation of Usability of Construction Waste as Aggregate [Volume 12, Issue 1, 2021, Pages 63-76]
Kumar, Ajay
A Deep Neural Network for Classification of Land Use Satellite Datasets in Mining Environments [Volume 13, Issue 3, 2022, Pages 797-808]
Kumar, Ajay
A Promising Automatic System for studying of Coal Mine Surfaces using Sentinel-2 Data to Assess a Classification on a Pixel-based Pattern [Volume 15, Issue 1, 2024, Pages 41-54]
Kumar, Akhilesh
Spatial Prediction of Landslide Hazard using GIS-multi-criteria Decision Analysis in Kullu District of Himachal Pradesh, India [Volume 13, Issue 4, 2022, Pages 943-956]
Kumar, Ankit
Numerical Analysis of Inclined Granular Pile Anchor Subjected to Uplift Forces in Expansive Soil using Abaqus [Volume 14, Issue 2, 2023, Pages 413-434]
Kumar, Dheeraj
Detection of Surface and Sub-surface Coal Mine Fire of Jharia Coalfields using Remotely Sensed and Ground Thermal Data [Volume 15, Issue 1, 2024, Pages 1-19]
Kumar, Pardeep
Site Response Analysis and Empirical Correlations between N-Values and Shear Modulus for Sub-Himalayan District Hamirpur using ProShake [Volume 13, Issue 4, 2022, Pages 1031-1047]
Kumar, Pardeep
Estimation of Ground Motion Amplification for Sub-Himalayan Strata due to Hypothetical Earthquake Motions [Volume 14, Issue 2, 2023, Pages 507-525]
Kurdi, M.
Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]
Kursun Unver, I.
Distribution of trace elements in coal and coal fly ash and their recovery with mineral processing practices: A review [Volume 9, Issue 3, 2018, Pages 641-655]
Küçüksütçü, C. B.
A new approach for assessing stability of rock slopes considering centroids of weak zones [Volume 9, Issue 1, 2018, Pages 1-18]
L
Lak, M.
Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]
Langarizadeh, G.
Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills [Volume 2, Issue 1, 2011]
Lazemi, H. A.
Compressive Failure Analyses of Rock-Like Materials by Experimental and Numerical Methods [Volume 12, Issue 3, 2021, Pages 769-783]
Lazemi, H. A.
On Propagation Mechanism of Cracks Emanating from Two Neighboring Holes in Cubic Concrete Specimens under Various Lateral Confinements [Volume 12, Issue 4, 2021, Pages 1003-1017]
Lei, Y.
Wedge Failure Analysis of the Slope Subjected to Uplift Forces by Analytical Method at Chingola Open Pits F & D [Volume 12, Issue 4, 2021, Pages 941-952]
Li, Enming
Artificial Neural Network Modeling as an Approach to Limestone Blast Production Rate Prediction: a Comparison of PI-BANN and MVR Models [Volume 14, Issue 2, 2023, Pages 375-388]
Long, Z. Mu
A review of Rock Burst’s Experimental Progress, Warning, Prediction, Control and Damage Potential Measures [Volume 11, Issue 1, 2020, Pages 31-48]
Lotfi, M.
Fractal-wavelet-fusion-based re-ranking of joint roughness coefficients [Volume 10, Issue 4, 2019, Pages 1121-1133]
Lotfi, M.
Investigating Alteration Zone Mapping Using EO-1 Hyperion Imagery and Airborne Geophysics Data [Volume 11, Issue 2, 2020, Pages 405-417]
Luna-Garcia, H.
Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]
M
M., Muhammad Ahsan
A Comparative Study on Machine Learning Algorithms for Geochemical Prediction Using Sentinel-2 Reflectance Spectroscopy [Volume 12, Issue 4, 2021, Pages 987-1001]
Maazallahi, V.
Analytical analysis of ultimate ground pressure on tunnel support system [Volume 6, Issue 2, 2015, Pages 151-157]
Maazallahi, V.
3D Characterization of Uniaxial Compressive Strength of Transversely-Isotropic Intact Rocks [Volume 11, Issue 2, 2020, Pages 629-641]
Mackizadeh, M. A.
Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]
MadanchiZare, Ahmad
Enhancing magnetic signals in unexploded ordnances (UXO) detection based on edge-preserved stable downward continuation method [Volume 5, Issue 1, 2014, Pages 13-24]
MadanchiZare, Ahmad
AN-EUL method for automatic interpretation of potential field data in unexploded ordnances (UXO) detection [Volume 5, Issue 2, 2014, Pages 67-77]
Madani, Ahmed Ali
Integration of Landsat-8 and Reflectance Spectroscopy data for Mapping of Late Neoproterozoic Igneous Ring Complexes in an Arid Environment: a Case Study of Gebel El-Bakriyah Area, Eastern Desert, Egypt [Volume 14, Issue 1, 2023, Pages 13-31]
Madani, Ahmed Ali
Change Detection of Surface Water of Atfih Spring by Integrated Effect of Rainfall Storms and Geological Structures using Landsat Data [Volume 14, Issue 1, 2023, Pages 79-96]
Madani, Ahmed A.
A Predictive GIS Model for Mapping Gold and Copper-bearing Alteration zones at South Gabal Um Monqul and Gabal Al Kharaza Prospects, North Eastern Desert, Egypt [Volume 14, Issue 4, 2023, Pages 1239-1260]
Madani, H.
Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]
Madani, H.
Method of Grading Subway Stations Based on Evacuation Capability: A Quantitative Method [Volume 11, Issue 2, 2020, Pages 587-609]
Madani, H.
A New Case-Based Reasoning Method for Prediction of Fractured Height of Longwall Panels [Volume 12, Issue 4, 2021, Pages 1103-1121]
Madani, H.
CFD-based Modeling of Sarin Gas Dispersion in a Subway Station–A Hypothetical Scenario [Volume 13, Issue 1, 2022, Pages 235-251]
Madani, H.
CFD Modeling of Impact of Gas Content Uncertainty on Methane Distribution in Underground Coal Mine Roadways [Volume 13, Issue 2, 2022, Pages 493-502]
Madani, Nasser
Anisotropic Inverse Distance Weighting Method: An Innovative Technique for Resource Modeling of Vein-type Deposits [Volume 13, Issue 4, 2022, Pages 957-972]
Maghsoudi, A.
Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]
Maghsoudi, A.
Geostatistical estimation to delineate oxide and sulfide zones using geophysical data; a case study of Chahar Bakhshi vein-type gold deposit, NE Iran [Volume 10, Issue 3, 2019, Pages 679-694]
Maghsoudi, A.
Robust Principal Component Analysis and Fractal Methods to Delineate Mineralization-Related Hydrothermally-Altered Zones from ASTER Data: A Case Study of Dehaj Terrain, Central Iran [Volume 11, Issue 4, 2020, Pages 1023-1037]
Maghsoudy, S.
Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review [Volume 11, Issue 2, 2020, Pages 517-537]
Maghsoudy, S.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Mahboubiaghdam, Majid
Machine Learning Predictive Approaches for Cu-Au Mineral prospectivity Map in Sonajil, NW of Iran: an Improvement by a Bayesian Semi-supervised Algorithm [Volume 14, Issue 4, 2023, Pages 1321-1342]
Mahdikhani, M.
Effect of Glass and Polypropylene Hybrid Fibers on Mode I, Mode II, and Mixed-Mode Fracture Toughness of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 2, 2022, Pages 559-577]
Mahdiyanfar, H.
Detection of Mo geochemical anomaly in depth using a new scenario based on spectrum–area fractal analysis [Volume 10, Issue 3, 2019, Pages 695-704]
Mahdiyanfar, H.
Identification of Buried Metal Ore Deposits using Geochemical Anomaly Filtering and Principal Factors of Power Spectrum [Volume 12, Issue 1, 2021, Pages 205-218]
Mahdiyanfar, Hossein
Fractal Modeling of Geochemical Mineralization Prospectivity Index based on Centered Log-Ratio Transformed Data for Geochemical Targeting: a Case Study of Cu Porphyry Mineralization [Volume 13, Issue 3, 2022, Pages 821-838]
Mahdiyanfar, Hossein
Integration of Fractal and Multivariate Principal Component Models for Separating Pb-Zn Mineral Contaminated Areas [Volume 14, Issue 3, 2023, Pages 1019-1035]
Mahjoore, M.
Cadmium Oxide Nanoparticles as A Novel Photo-Catalyst for Degradation of Ciprofloxacin Antibiotic in Aqueous Media [Volume 13, Issue 1, 2022, Pages 155-164]
Mahmoodabadi, M.
A new chart-independent method for fast identification of control level of industrial processes using continuous data [Volume 8, Issue 2, 2017, Pages 203-213]
Mahmoodi Markid, A.
Development of a goal programming model for optimization of truck allocation in open pit mines [Volume 8, Issue 3, 2017, Pages 359-371]
Mahmoodi Meymand, Mohammad
Effect of Stable Nano-microbubbles on Sulfide Copper Flotation and Reduction of Chemicals Dosage [Volume 15, Issue 1, 2024, Pages 261-283]
Mahmoud, Deemah Saad
Change Detection of Surface Water of Atfih Spring by Integrated Effect of Rainfall Storms and Geological Structures using Landsat Data [Volume 14, Issue 1, 2023, Pages 79-96]
Mahto, S. Kumar
Impact Assessment of Mining Activities on Surface and Sub-Surface Water Condition of Ramgarh, Jharkhand, India using Geospatial Techniques [Volume 12, Issue 3, 2021, Pages 651-665]
Mahvash Mohammadi, N.
A Comparative Study of SVM and RF Methods for Classification of Alteration Zones Using Remotely Sensed Data [Volume 11, Issue 1, 2020, Pages 49-61]
Majdi, A.
Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]
Majdi, A.
3D Characterization of Uniaxial Compressive Strength of Transversely-Isotropic Intact Rocks [Volume 11, Issue 2, 2020, Pages 629-641]
Majdi, A.
Determination of Hydraulic Jacking Mechanism and Maximum Allowable Grout Pressure during Grout Injection in Anisotropic Rocks [Volume 12, Issue 2, 2021, Pages 589-603]
Majdi, A.
An Analytical Method of Predicting Length of Grout Penetration in Jointed Rocks [Volume 12, Issue 4, 2021, Pages 1155-1175]
Majdi, A.
Determination of Caving Hydraulic Radius of Rock Mass in Block Caving Method using Numerical Modeling and Multivariate Regression [Volume 13, Issue 1, 2022, Pages 217-233]
Majdi, A.
Determining Probability Distribution Functions of Rock Joint Geometric Properties [Volume 13, Issue 1, 2022, Pages 281-308]
Majdi, A.
Cavability Assessment of Rock Mass in Block Caving Mining Method based on Numerical Simulation and Response Surface Methodology [Volume 13, Issue 2, 2022, Pages 579-606]
Majdi, Abbas
Determination of the caving zone height using numerical and physical modeling based on the undercutting method, joint dip, and spacing [(Articles in Press)]
Malakoutikhah, Mahdi
Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]
Maleki, B.
Integrating Geophysical Attributes with New Cuckoo Search Machine-Learning Algorithm to Estimate Silver Grade Values–Case Study: Zarshouran Gold Mine [Volume 11, Issue 3, 2020, Pages 865-879]
Maleki, S.
Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]
Maleki, Sh.
A New 3D Model for Shear Wave Velocity by Utilizing Conventional Petrophysical Logs and Geostatistical Method [Volume 13, Issue 2, 2022, Pages 431-447]
Maleki Moghaddam, M.
Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]
Maleki Moghaddam, M.
Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]
Maleki Moghaddam, M.
Low-Cost Approaches to Promote Performance of Comminution Circuit at Steel-Sirjan Iron Ore Complex [Volume 12, Issue 4, 2021, Pages 1065-1076]
Mamani, Israel
ASSESSING THE OPERATIONAL DAMAGE IMPACT ON MINING TIRES (CASE STUDY) [(Articles in Press)]
Mamani Quispe, José Nestor
Copper ore grade prediction using Machine Learning techniques in a copper deposit [(Articles in Press)]
Manafi, Z.
Optimization of Chalcopyrite Bioleaching using Two Different Adaptation Methods: Top-Down and Bottom-Up [Volume 12, Issue 4, 2021, Pages 1055-1064]
Manafi, Zahra
Bio-flotation of Chalcopyrite using Halophilic Bacteria Separately and Their Combination as Pyrite bio-Depressant [Volume 13, Issue 4, 2022, Pages 1119-1138]
Manafi, Zahra
Investigating possibility of replacing some chemical reagents used in sulfide copper flotation with halophilic bacteria [Volume 14, Issue 1, 2023, Pages 243-258]
Manda, E.
Wedge Failure Analysis of the Slope Subjected to Uplift Forces by Analytical Method at Chingola Open Pits F & D [Volume 12, Issue 4, 2021, Pages 941-952]
MANDAL, SUJIT KUMAR
Magnitude of vibration triggering component determines safety of structures [Volume 5, Issue 1, 2014, Pages 35-46]
Mansouri, A. R.
Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]
Mansouri, H.
Blast vibration modeling using linear superposition method [Volume 6, Issue 2, 2015, Pages 125-140]
Mansourpour, Z.
A finite element model to simulate magnetic field distribution and laboratory studies in wet low-intensity magnetic separator [Volume 10, Issue 3, 2019, Pages 717-727]
Mantey, J.
Operational dynamics of “Galamsey” within eleven selected districts of western region of Ghana [Volume 8, Issue 1, 2017, Pages 11-34]
Manyepa, J.
Approaches for Designing Extraction Methods for Randomly Occurring Pocket Formation of Gemstones: A Case of Musakashi Emerald Area, Solwezi, Zambia [Volume 12, Issue 3, 2021, Pages 605-618]
Marandi, R.
Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium [Volume 1, Number 1, 2010]
Maroufi Naghadehi, Kh.
Selection of new exploration targets using lithogeochemical data obtained for Taknar deposit located in NE of Iran [Volume 6, Issue 1, 2015, Pages 11-20]
Marquina Araujo, Jairo Jhonatan
Copper ore grade prediction using Machine Learning techniques in a copper deposit [(Articles in Press)]
Masoudi, P.
Developing a method for identification of net zones using log data and diffusivity equation [Volume 2, Issue 1, 2011]
Masoumi, I.
Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]
Mata, Melodi Mbuyi
Granite Downstream Production Dependent Size and Profitability Assessment: an application of Mathematical-based Artificial Intelligence Model and WipFrag Software [Volume 15, Issue 2, 2024, Pages 497-515]
Mathiyazhagan, N
Metal extraction competence of plants on waste dumps of magnesite mine, Salem District, South India [Volume 4, Issue 2, 2013, Pages 113-124]
Matidza, I. Mulalo
Ultimate Pit Limit Optimization using Boykov-Kolmogorov Maximum Flow Algorithm [Volume 12, Issue 1, 2021, Pages 1-13]
Mazaheri, S. A.
Geochemistry, petrology, and mineralization in volcanic rocks located in south Neyshabour, NE Iran [Volume 8, Issue 2, 2017, Pages 139-154]
Mazraehli, M.
Stochastic Stability Analysis of Tunnels Considering Randomness of Rock Mass Properties [Volume 12, Issue 4, 2021, Pages 1123-1141]
Mehrabani, J. Vazifeh
An Investigation on Tailing Slurry Transport in Kooshk lead-Zinc Mine in Iran Based on Non-Newtonian Fluid Rheology: an Experimental Study [Volume 12, Issue 3, 2021, Pages 877-893]
Mehrnia, R.
Evaluation of Fractal Variance-Distance Model in Identifying Geochemical Anomalies of Calamine Mehdiabad Mining Complex, Central Iran [Volume 12, Issue 1, 2021, Pages 45-62]
Mehrnia, Seyed R.
A fuzzy-based prognosis of ore mineralization potentials in Ramand region (Qazvin province) [Volume 8, Issue 3, 2017, Pages 403-418]
Memarian, H.
Limestone chemical components estimation using image processing and pattern recognition techniques [Volume 2, Issue 2, 2011, Pages 126-135]
Memarian, H.
Determination of scratching energy index for Cerchar abrasion test [Volume 9, Issue 1, 2018, Pages 73-89]
Memarian, H.
A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]
Memarian, H.
Development of a New Experimental Technique for Dynamic Fracture Toughness Measurement of Rocks using Drop Weight Test [Volume 11, Issue 3, 2020, Pages 909-920]
Memarian, H.
Adaptive Multi-Size Block Modeling for Mineral Resources and Ore Reserves Evaluation [Volume 12, Issue 2, 2021, Pages 339-350]
Memarian, Hossein
Application of Bayesian decision making tool in detecting oil-water contact in a carbonate reservoir [Volume 5, Issue 2, 2014, Pages 91-97]
Memarian, Hossein
Identifying Corresponding Earthquake of Mobarak Abad Landslide, Northeast Tehran, Iran [Volume 14, Issue 4, 2023, Pages 1343-1359]
Mert, B. A.
A GIS-aided resource estimation of coalfields in Kangal basin, Sivas province, Turkey [Volume 9, Issue 3, 2018, Pages 581-591]
Meysami, F.
Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]
Mhlongo, Sphiwe Emmanuel EMMANUEL
A Rule-based Expert System for Selection of Rehabilitation Strategies for Abandoned Mines in South Africa [Volume 14, Issue 4, 2023, Pages 1171-1181]
Mijalkovski, S.
Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]
Mikaeil, R.
Ranking sawability of dimension stone using PROMETHEE method [Volume 6, Issue 2, 2015, Pages 263-271]
Mikaeil, R.
Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]
Mikaeil, R.
Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process [Volume 10, Issue 3, 2019, Pages 559-574]
Mikaeil, R.
Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]
Mikaeil, R.
Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]
Mikaeil, R.
Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]
Mikaeil, R.
Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]
Mikaeil, R.
A Modified Schimazek’s F-abrasiveness Factor for Evaluating Abrasiveness of Andesite Rocks in Rock Sawing Process [Volume 11, Issue 2, 2020, Pages 563-575]
Mikaeil, R.
Investigating and Ranking Blasting Patterns to Reduce Ground Vibration using Soft Computing Approaches and MCDM Technique [Volume 11, Issue 3, 2020, Pages 881-897]
Mikaeil, R.
Study of Effect of Cooling/Lubricating Fluids, Machining Parameters, and Rock Mechanical Properties on Penetration Rate in Rock Drilling Process [Volume 12, Issue 3, 2021, Pages 825-843]
Mikaeil, R.
Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]
Mikaeil, Reza
Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]
Mikaeil, Reza
An Experimental-Intelligent Method to Predict Noise Value of Drilling in Dimension Stone Industry [Volume 13, Issue 3, 2022, Pages 693-713]
Mikaeil, Reza
-Permeability Tensor Calculation of Pumped Storage Power Plant Cavern of Rudbar Lorestan Dam using Crack Tensor [Volume 14, Issue 4, 2023, Pages 1261-1272]
Mikaeil, Reza
Studying Effects of Cooling/Lubricating Fluids, Machining Parameters, and Rock Mechanical Properties on Specific Energy in Rock Drilling Process [Volume 15, Issue 2, 2024, Pages 613-636]
Mikaeil, Reza
Evaluation of the Slope Stability under Geological Conditions Using Multi-Factorial Fuzzy Classification System [(Articles in Press)]
Mikhak Beiranvand, N.
Estimation of penetration rate of tunnel boring machines using Monte-Carlo simulation method [Volume 7, Issue 2, 2016, Pages 175-184]
Mirakovski, D.
Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]
Mirakovski, Dejan
Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]
Mirmohammadi, Mirsaleh
A Process Mineralogy Based Approach for Arsenic Removal from Copper Concentrate in Cu – Mo Flotation Circuit [Volume 14, Issue 3, 2023, Pages 929-944]
Mirsalari, S. E.
A boundary element/finite difference analysis of subsidence phenomenon due to underground structures [Volume 8, Issue 2, 2017, Pages 237-253]
Mirsepahvand, F.
Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]
Mirshekari, Sasan
A model for predicting dynamic frothability index of dual-frother blends [Volume 6, Issue 1, 2015, Pages 119-124]
Mirshrkari, S.
Adsorptive Study of Cadmium Removal from Aqueous Solution Using a Coal Waste Loaded with Fe3O4 Nanoparticles [Volume 13, Issue 2, 2022, Pages 527-545]
Mirzaee, H. A.
Investigation of parameters affecting desilication of diasporic bauxite in Jajarm mine by thermo-chemical treatment [Volume 8, Issue 1, 2017, Pages 75-81]
Mirzaei, H. A.
Modeling and Optimizing Aluminum Hydroxide Precipitation Process in Industrial Scale; case study: Iran Alumina Plant [Volume 12, Issue 1, 2021, Pages 235-251]
Mirzaei, Hossein
Performance Comparison of Particle Swarm Optimization and Genetic Algorithm for Back-analysis of Soil Layer Geotechnical Parameters [Volume 14, Issue 1, 2023, Pages 217-232]
Mirzaei, R.
A comparative study of performance of K-nearest neighbors and support vector machines for classification of groundwater [Volume 7, Issue 2, 2016, Pages 149-164]
Mirzaei, S.
Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]
Mirzaeian, Yousef
Simulation of Crack Propagation Mechanism in Porous Media using Modified linear Element Displacement Discontinuity Method [Volume 13, Issue 3, 2022, Pages 903-927]
Mirzaeian, Yousef
Analytical Solutions of First-order Displacement Discontinuity Elements in Poroelasticity [Volume 14, Issue 2, 2023, Pages 601-618]
Mirzaei Nasirabad, H.
Development of a goal programming model for optimization of truck allocation in open pit mines [Volume 8, Issue 3, 2017, Pages 359-371]
Mirzaei Nasir Abad, H.
Numerical Modelling of Backfill Grouting Approaches in EPB Tunneling [Volume 11, Issue 1, 2020, Pages 301-314]
Mirzaei Nasir Abad, H.
A 3D Finite-Difference Analysis of Interaction between a Newly-Driven Large Tunnel with Twin Tunnels in Urban Areas [Volume 11, Issue 3, 2020, Pages 809-823]
Mirzaei Nasir Abad, Hossein
Performance Evaluation of a Haul Truck Allocation Model in the Sungun Copper Mine [(Articles in Press)]
Mirzaghorbanali, A.
Effect of air column in transport canisters on measured gas contents of coal [Volume 8, Issue 1, 2017, Pages 1-9]
Mirzaghorbanali, A.
An experimental study of axial load transfer mechanisms of cable bolts using axially split embedment apparatus [Volume 8, Issue 2, 2017, Pages 131-137]
Mirzaghorbanali, A.
Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]
Mirzaghorbanali, A.
Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]
Mirzaie, M.
Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]
Mirzaie, M.
Detection of Zones Based on Ore and Gangue Using Fractal and Multivariate Analysis in Chah Gaz Iron Ore Deposit, Central Iran [Volume 11, Issue 2, 2020, Pages 453-466]
Mirzamohammadi, Hosein
Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]
Mirzapour, Y.
Exploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study [Volume 9, Issue 4, 2018, Pages 1009-1018]
Mirzehi, Mohammad
A Hybrid Model for Back-Break Prediction using XGBoost Machine learning and Metaheuristic Algorithms in Chadormalu Iron Mine [Volume 14, Issue 2, 2023, Pages 689-712]
Mishra, B.
Pit lakes as an end use of mining: A review [Volume 5, Issue 2, 2014, Pages 99-111]
Mishra, Smriti
A Comprehensive Literature Review Approach for Assessing Probable Impact of Post-reclamation Strategies Applied to Abandoned Mines [Volume 14, Issue 3, 2023, Pages 871-896]
Mishra, Smriti
Review of mining tourism and destination image positioning – Case study: India [Volume 14, Issue 4, 2023, Pages 1081-1104]
Mishra, Smriti
Tourism Management with AI Integration for Mining Heritage: a Literature Review Approach [Volume 15, Issue 1, 2024, Pages 115-149]
Mishra, Smriti
Mining Ghost Town Revitalization through Heritage Tourism Initiatives [Volume 15, Issue 2, 2024, Pages 439-461]
Mishra, Smriti
Exploring Dark Tourism in Mining Heritage: Competitiveness and Ethical Dilemmas [(Articles in Press)]
Mishra, Smriti
Revitalizing Mining Heritage Tourism: A Machine Learning Approach to Tourism Management [(Articles in Press)]
Mithal Jiskani, I.
Analysis and Forecast of Mining Accidents in Pakistan [Volume 11, Issue 4, 2020, Pages 967-976]
Moaref vand, P.
A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [Volume 6, Issue 1, 2015, Pages 73-93]
Moarefvand, P.
Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]
Moarefvand, P.
Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]
Moarefvand, P.
Geostatistical estimation to delineate oxide and sulfide zones using geophysical data; a case study of Chahar Bakhshi vein-type gold deposit, NE Iran [Volume 10, Issue 3, 2019, Pages 679-694]
Moarefvand, P.
Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]
Moarefvand, P.
On Analytic Solutions of Elastic Net Displacements around a Circular Tunnel [Volume 11, Issue 2, 2020, Pages 419-432]
Moarefvand, P.
Applying Analytical and Quantitative Criteria to Estimate Block Model Uncertainty and Mineral Reserve Classification: A Case Study: Khoshumi Uranium Deposit in Yazd [Volume 12, Issue 2, 2021, Pages 425-441]
Moazam, S.
A new method for 3-D magnetic data inversion with physical bound [Volume 8, Issue 3, 2017, Pages 501-510]
Moeini, A.
The Effect of Operating Parameters on Bromine Extraction from Desalination Plant Discharge [Volume 13, Issue 1, 2022, Pages 165-174]
Moeini, H.
Local multivariate outliers as geochemical anomaly halos indicators, a case study: Hamich area, Southern Khorasan, Iran [Volume 8, Issue 2, 2017, Pages 179-189]
Moeini, H.
Application of continuous restricted Boltzmann machine to detect multivariate anomalies from stream sediment geochemical data, Korit, East of Iran [Volume 8, Issue 4, 2017, Pages 673-682]
Moghadasi, M.
Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]
Moghaddam, S.
Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method [Volume 8, Issue 1, 2017, Pages 103-110]
Moghise, M.
Concentration and recycling of rare earth elements (REEs) from iron mine waste using a combination of physical separation methods [Volume 7, Issue 2, 2016, Pages 195-203]
Moghooeinejad, Ahmad
Bio-flotation of Chalcopyrite using Halophilic Bacteria Separately and Their Combination as Pyrite bio-Depressant [Volume 13, Issue 4, 2022, Pages 1119-1138]
Moghooeinejad, Ahmad
Investigating possibility of replacing some chemical reagents used in sulfide copper flotation with halophilic bacteria [Volume 14, Issue 1, 2023, Pages 243-258]
Mohajer-Moghari, F.
Pre-treatment of toxic element and cationic dye onto natural biomass: characterization and optimization [Volume 10, Issue 3, 2019, Pages 649-658]
Mohamadi Bolban Abad, Sh.
Interaction between Tunnel and Surface Foundation using PFC2D [Volume 12, Issue 3, 2021, Pages 785-798]
Mohamadi Bolban Abad, Sh.
Interaction between One Internal Hole and Two Neighboring Joints under Uniaxial Compression using an Experimental Test and a Numerical Simulation [Volume 13, Issue 2, 2022, Pages 407-420]
Mohamed El Shafey, A. H.
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Mohamed Gaafar, I.
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Mohammad, N.
A Stochastic Model Upgrading Gold Content in Cyanide Leaching using Monte Carlo Simulation [Volume 12, Issue 3, 2021, Pages 619-631]
Mohammad, N.
Optimization of Process Parameters for Enhanced Up-gradation of Qilla Saifullah Copper ore through Froth Floatation Technique [Volume 12, Issue 3, 2021, Pages 633-649]
Mohammadi, D.
Investigating and Ranking Blasting Patterns to Reduce Ground Vibration using Soft Computing Approaches and MCDM Technique [Volume 11, Issue 3, 2020, Pages 881-897]
Mohammadi, D.
Interaction of Excavated Tunnels by Earth Pressure Balance Machines and Sub-surface Obstacles; Case Study: Tehran Metro Line 7 [Volume 12, Issue 3, 2021, Pages 799-814]
Mohammadi, Gh.
Detection of Zones Based on Ore and Gangue Using Fractal and Multivariate Analysis in Chah Gaz Iron Ore Deposit, Central Iran [Volume 11, Issue 2, 2020, Pages 453-466]
Mohammadi, Ghodratollah
Compressional and Shear Interval Velocity Modeling to Determine Formation Pressures in an Oilfield of SW Iran [Volume 13, Issue 3, 2022, Pages 851-873]
Mohammadi, H.
Extension of Excavation Damaged Zone Due to Longwall Working Effect [Volume 7, Issue 1, 2016, Pages 13-24]
Mohammadi, H.
A three dimensional geometrical model for calculation of induced stresses surrounding longwall working [Volume 9, Issue 3, 2018, Pages 727-740]
Mohammadi, H.
Investigation of Bishop’s and Janbu’s Models Capabilities on Slope Stability Problems with Special Consideration to Open-Pit Mining Operations [Volume 11, Issue 1, 2020, Pages 161-170]
Mohammadi, J.
Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]
Mohammadi, S.
Comparison of golden section search method and imperialist competitive algorithm for optimization cut-off grade- case study: Mine No. 1 of Golgohar [Volume 6, Issue 1, 2015, Pages 63-71]
Mohammadi, S.
Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]
Mohammadi, S.
Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]
Mohammadi, S.
Development of Geometallurgical Indices for Semi-Autogenous Grinding at Sarcheshmeh Porphyry Copper Mine [Volume 11, Issue 2, 2020, Pages 375-385]
Mohammadi, S.
Quantifying Roof Falling Potential based on CMRR Method by Incorporating DEMATEL-MABAC Method; A Case Study [Volume 12, Issue 1, 2021, Pages 151-162]
Mohammadi, Seyed Davoud
Preparation of Heterogeneous Rock-Like Samples Containing Non-Persistent Notch; Different Layout [Volume 13, Issue 4, 2022, Pages 1139-1157]
Mohammadi, Seyed Davoud
Financial Risk Management Prediction of Mining and Industrial Projects using Combination of Artificial Intelligence and Simulation Methods [Volume 13, Issue 4, 2022, Pages 1211-1223]
Mohammadi Behboud, M.
Studying empirical correlation between drilling specific energy and geo-mechanical parameters in an oil field in SW Iran [Volume 8, Issue 3, 2017, Pages 393-401]
Mohammadiun, M
Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]
Mohammadkhani, M.
Investigation of Mechanism of Adsorption of Xanthate and Hydroxamate on Malachite [Volume 11, Issue 3, 2020, Pages 921-933]
Mohammadnejad, S.
The Effect of Operating Parameters on Bromine Extraction from Desalination Plant Discharge [Volume 13, Issue 1, 2022, Pages 165-174]
Mohammadnejad, S.
Mechanism of Zinc Complexation by Alkaline Ligands: A Molecular Modelling Study [Volume 13, Issue 2, 2022, Pages 421-430]
Mohammadnejad, Sima
Role of Functional Groups in Selective Adsorption of Gold over Copper Cyano complexes by Activated Carbon: A DFT Study [Volume 13, Issue 3, 2022, Pages 891-901]
Mohammadnejad, Sima
Role of Glycine in Cyanidation of Copper Bearing Gold Ores: an Experimental and Molecular Modeling Study [Volume 14, Issue 3, 2023, Pages 999-1009]
Mohammad Torab, F.
Estimation of Cadmium and Uranium in a stream sediment from Eshtehard region in Iran using an Artificial Neural Network [Volume 7, Issue 1, 2016, Pages 97-107]
Mohammad Torab, F.
Evaluation of coalbed methane potential in Parvadeh IV coal deposit in central Iran using a combination of MARS modeling and Kriging [Volume 8, Issue 2, 2017, Pages 305-319]
Mohammad Torab, F.
Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]
Mohammad Torab, F.
Ant colony algorithm as a high-performance method in resource estimation using LVA field; A case study: Choghart Iron ore deposit [Volume 10, Issue 3, 2019, Pages 667-678]
Mohammady Oskouei, M.
Role of smile correction in mineral detection on hyperion data [Volume 7, Issue 2, 2016, Pages 261-272]
Mohammadzadeh, A. A.
Effects of Flocculant, Surfactant, Coagulant, and Filter Aid on Efficiency of Filtration Processing of Copper Concentrate: Mechanism and Optimization [Volume 11, Issue 1, 2020, Pages 119-141]
Mohammadzadeh, Mohammadjafar
Machine Learning Predictive Approaches for Cu-Au Mineral prospectivity Map in Sonajil, NW of Iran: an Improvement by a Bayesian Semi-supervised Algorithm [Volume 14, Issue 4, 2023, Pages 1321-1342]
Mohd Hashim, M. H.
A Preliminary Assessment of Rock Slope Stability in Tropical Climates: A Case Study at Lafarge Quarry, Perak, Malaysia [Volume 11, Issue 3, 2020, Pages 661-673]
Mohd Hashim, M. H. Bin
Monte Carlo Simulation-Based Uncertainty Integration into Rock Particle Shape Descriptor Distributions [Volume 12, Issue 2, 2021, Pages 299-311]
Mohd Hashim, M. H. bin
Application of Stochastic Simulation in Assessing Effect of Particle Morphology on Fracture Characteristics of Sandstone [Volume 12, Issue 4, 2021, Pages 969-986]
Mohd Hashim, Mohd Hazizan bin
Evaluating Microscale Failure Response of Various Weathering Grade Sandstones Based on Micro-Scale Observation and Micro-Structural Modelling Subjected to Wet and Dry Cycles [Volume 13, Issue 2, 2022, Pages 341-355]
Mohd Hashim, Mohd Hazizan bin
The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]
Mohd Hashim, Mohd Hazizan bin
Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]
Mohd Hashim, Mohd Hazizan bin
Analysis of Granite Failure Modes and Energy Conversion under Uniaxial Compression at Various Temperatures [Volume 14, Issue 2, 2023, Pages 493-506]
Mohebbi, M.
Rock mass structural data analysis using image processing techniques (Case study: Choghart iron ore mine northern slopes) [Volume 8, Issue 1, 2017, Pages 61-74]
Mohseni, M.
Risk prediction based on a time series case study: Tazareh coal mine [Volume 7, Issue 1, 2016, Pages 127-134]
Mohseni, M.
An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]
Mohseni, M.
A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]
Mohseni, M.
Dilution Risk Ranking in Underground Metal Mines using Multi-Attributive Approximation Area Comparison [Volume 11, Issue 4, 2020, Pages 977-989]
Mohseni, M.
Characterization of Leaching Feed and Residue of Mechanically Activated Sphalerite [Volume 12, Issue 4, 2021, Pages 1029-1040]
Mohtasham, M.
Development of a goal programming model for optimization of truck allocation in open pit mines [Volume 8, Issue 3, 2017, Pages 359-371]
Mohtasham, Mehrnaz
Performance Evaluation of a Haul Truck Allocation Model in the Sungun Copper Mine [(Articles in Press)]
Mohtasham Seyfi, M.
Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]
Moini, H.
Ant colony algorithm as a high-performance method in resource estimation using LVA field; A case study: Choghart Iron ore deposit [Volume 10, Issue 3, 2019, Pages 667-678]
Mojahedfar, A.R.
Determination of the largest pit with the non-negative net profit in the open pit mines [Volume 1, Number 2, 2010]
Mojarab, M.
A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]
Mojarab, Masoud
Identifying Corresponding Earthquake of Mobarak Abad Landslide, Northeast Tehran, Iran [Volume 14, Issue 4, 2023, Pages 1343-1359]
Mojarradi, Gh.
Negative impacts of mine exploitations on rural regions of Tekab Township [Volume 7, Issue 1, 2016, Pages 57-66]
Mojeddifar, Saeed
Adaptive Neuro-Fuzzy Inference System application for hydrothermal alteration mapping using ASTER data [Volume 4, Issue 2, 2013, Pages 83-96]
Mokhberdoran, M.
Maintainability measure based on operating environment, a case study: Sungun copper mine [Volume 8, Issue 3, 2017, Pages 511-521]
Mokhtari, H.
Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines [Volume 10, Issue 4, 2019, Pages 903-916]
Mokhtari, M.
Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]
Mokhtarian Asl, M.
Commodity price uncertainty propagation in open-pit mine production planning by Latin hypercube sampling method [Volume 7, Issue 2, 2016, Pages 215-227]
Molaei, M. A.
Estimating the function of copper consumption in Iran between 1991- 2011 using Johansen model [Volume 6, Issue 2, 2015, Pages 183-189]
Molayemat, H.
Evaluation of coalbed methane potential in Parvadeh IV coal deposit in central Iran using a combination of MARS modeling and Kriging [Volume 8, Issue 2, 2017, Pages 305-319]
Molayemat, H.
Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]
Molladavoodi, Hamed
Specimens Size Effect on Mechanical and Fracture Properties of Rocks: a Review [Volume 14, Issue 4, 2023, Pages 1273-1293]
Mollai, H.
Heavy metal pollution and identification of their sources in soil over Sangan iron-mining region, NE Iran [Volume 8, Issue 2, 2017, Pages 277-289]
Mollai, Habib
Protection of Geological Heritage by a New Phenomenon in Earth Sciences: Geoconservation [Volume 15, Issue 1, 2024, Pages 365-379]
Mollajan, Amir
Application of Bayesian decision making tool in detecting oil-water contact in a carbonate reservoir [Volume 5, Issue 2, 2014, Pages 91-97]
Monavari, M.
Evaluation of Mine Reclamation Criteria using Delphi-Fuzzy Approach [Volume 12, Issue 2, 2021, Pages 367-384]
Monjezi, M.
Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]
Monjezi, M.
A Mathematical Model to Optimize Allocation Sequence in Dispatching Problem [Volume 11, Issue 1, 2020, Pages 185-192]
Monjezi, M.
Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects [Volume 11, Issue 2, 2020, Pages 577-586]
Monjezi, M.
Design of Loading and Transportation Fleet in Open-Pit Mines using Simulation Approach and Metaheuristic Algorithms [Volume 12, Issue 4, 2021, Pages 1177-1188]
Monjezi, Masoud
Evaluation the Effect of Blast Pattern on Post-Failure Rate around the Miyaneh-Ardabil Railway Tunnel [(Articles in Press)]
Montazeri, I.
Ranking and comparing of traditional and industrial coke making by TOPSIS technique in Shahrood Simin Coke Company [Volume 7, Issue 2, 2016, Pages 165-173]
Moosavi, E.
A 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks [Volume 11, Issue 2, 2020, Pages 467-480]
Moosavi, E.
A Comprehensive Study of Several Meta-Heuristic Algorithms for Open-Pit Mine Production Scheduling Problem Considering Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 721-736]
Moosavi, Seyed A.
A new brittleness index for estimation of rock fracture toughness [Volume 8, Issue 1, 2017, Pages 83-91]
Moosavirad, Seyed M.
Copper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study [Volume 10, Issue 4, 2019, Pages 1013-1029]
Moosazadeh, S.
Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]
Moradi, Sirvan
Financial Risk Management Prediction of Mining and Industrial Projects using Combination of Artificial Intelligence and Simulation Methods [Volume 13, Issue 4, 2022, Pages 1211-1223]
Moradpouri, F.
An improvement in RTM method to image steep dip petroleum bearing structures and its superiority to other methods [Volume 8, Issue 4, 2017, Pages 573-578]
Moradpouri, F.
A Practical Comparison between Gaussian and Direct Sequential Simulation Algorithms using a 3D Porosity Dataset [Volume 13, Issue 2, 2022, Pages 547-557]
Moradzadeh, A.
Inverse modeling of HEM data using a new inversion algorithm [Volume 1, Number 2, 2010]
Moradzadeh, A.
Support vector regression for prediction of gas reservoirs permeability [Volume 2, Issue 1, 2011]
Moradzadeh, A.
Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]
Moradzadeh, A.
3D gravity data-space inversion with sparseness and bound constraints [Volume 8, Issue 2, 2017, Pages 227-235]
Moradzadeh, A.
A new stochastic 3D seismic inversion using direct sequential simulation and co-simulation in a genetic algorithm framework [Volume 8, Issue 3, 2017, Pages 321-335]
Moradzadeh, A.
An improvement in RTM method to image steep dip petroleum bearing structures and its superiority to other methods [Volume 8, Issue 4, 2017, Pages 573-578]
Moradzadeh, A.
Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]
Moradzadeh, A.
Facies Quality Zoning in Shale Gas by Deep Learning Method [Volume 12, Issue 1, 2021, Pages 271-280]
Moradzadeh, Ali
Application of Artificial Neural Networks and Support Vector Machines for carbonate pores size estimation from 3D seismic data [Volume 4, Issue 1, 2013, Pages 1-14]
Moradzadeh, Ali
Dimensionality analysis of subsurface structures in magnetotellurics using different methods (a case study: oil field in Southwest of Iran) [Volume 7, Issue 1, 2016, Pages 119-126]
Moreno-Baez, A.
Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]
Morla, R.
DPM flow pattern of LHD in underground mines with different ventilation conditions [Volume 10, Issue 2, 2019, Pages 315-326]
Morshedlou, Amid
Reliability-based maintenance scheduling of powered supports in Tabas mechanized coal mine [Volume 5, Issue 2, 2014, Pages 113-120]
Mortezaie, Rahim
Preparation of Heterogeneous Rock-Like Samples Containing Non-Persistent Notch; Different Layout [Volume 13, Issue 4, 2022, Pages 1139-1157]
Mosazadeh, Kiomars
Enhancing magnetic signals in unexploded ordnances (UXO) detection based on edge-preserved stable downward continuation method [Volume 5, Issue 1, 2014, Pages 13-24]
Mosazadeh, Kiomars
AN-EUL method for automatic interpretation of potential field data in unexploded ordnances (UXO) detection [Volume 5, Issue 2, 2014, Pages 67-77]
Moshashaei, K.
Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]
Moshrefi, S.
Prediction of ultimate strength of shale using artificial neural network [Volume 9, Issue 1, 2018, Pages 91-105]
Moshrefi, S.
New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]
Mostafaei, K.
3D model construction of induced polarization and resistivity data with quantifying uncertainties using geostatistical methods and drilling (Case study: Madan Bozorg, Iran) [Volume 9, Issue 4, 2018, Pages 857-872]
Mostafaei, Kamran
Delineation of Gold Exploration Targets based on Prospectivity Models through an Optimization Algorithm [Volume 15, Issue 2, 2024, Pages 597-611]
Mostoufi, Navid
Kinetics of chemical leaching of chalcocite from low-grade copper ore: size-distribution behavior [Volume 6, Issue 1, 2015, Pages 109-118]
Mottahedi, A.
Risk assessment of Flyrock in Surface Mines using a FFTA-MCDM Combination [Volume 12, Issue 1, 2021, Pages 191-203]
Mousa, Bahaa
Prediction of Iron Ore Grade using Artificial Neural Network, Computational Method, and Geostatistical Technique at El-Gezera Area, Western Desert, Egypt [(Articles in Press)]
Mousavi, A.
Highest-Level Implementation of Push–Relabel Algorithm to Solve Ultimate Pit Limit Problem [Volume 12, Issue 2, 2021, Pages 443-455]
Mousavi, A.
Design of Loading and Transportation Fleet in Open-Pit Mines using Simulation Approach and Metaheuristic Algorithms [Volume 12, Issue 4, 2021, Pages 1177-1188]
Mousavi, A.
Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]
Mousavi, M.
Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]
Mousavi, Seyed Ahmad
An Investigation into Bench Health Monitoring under Blast Loading in Hoek-Brown Failure Criterion using Finite Difference Method [Volume 13, Issue 3, 2022, Pages 875-889]
Mousavi, Seyed M.
A Proposed Biochemical Protocol to Isolate and Characterize Acidophilic Bacteria from Tailings Soil [Volume 11, Issue 4, 2020, Pages 1157-1171]
Mousavi, Seyed S.
Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel) [Volume 8, Issue 1, 2017, Pages 111-130]
Mousavi, Seyed S.
A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]
Mousavi, S. M.
Comparison of Copper Dissolution in Chalcopyrite Concentrate Bioleaching with Acidianus Brierleyi in Different Initial pH Values [Volume 11, Issue 3, 2020, Pages 753-764]
Mousavinogholi, A.
A Mathematical Model to Optimize Allocation Sequence in Dispatching Problem [Volume 11, Issue 1, 2020, Pages 185-192]
Mousavinogholi, A.
Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects [Volume 11, Issue 2, 2020, Pages 577-586]
Mozafari, A.
Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]
Mozdianfard, M
Predicting peak particle velocity by artificial neural networks and multivariate regression analysis - Sarcheshmeh copper mine, Kerman, Iran [Volume 4, Issue 2, 2013, Pages 125-132]
Muhić – Šarac, T.
Gold, Silver and Iron in Iron Oxy-hydroxide Precipitate Formed in Process of Acid Mine Drainage [Volume 11, Issue 2, 2020, Pages 335-346]
MUHIZI, Patrick
The Efficiency of Clay-Based Adsorbent in Fluoride Removal from Groundwater: Adsorption Process [Volume 14, Issue 3, 2023, Pages 839-851]
Mulenga, S.
Blast Design for Improved Productivity using a Modified Available Energy Method [Volume 11, Issue 3, 2020, Pages 643-659]
Mulugeta Sisay, C.
Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]
Murthy, C.H.S.N.
Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]
Mutambo, V. Patson
Approaches for Designing Extraction Methods for Randomly Occurring Pocket Formation of Gemstones: A Case of Musakashi Emerald Area, Solwezi, Zambia [Volume 12, Issue 3, 2021, Pages 605-618]
Mwangi, A. David
Ultimate Pit Limit Optimization using Boykov-Kolmogorov Maximum Flow Algorithm [Volume 12, Issue 1, 2021, Pages 1-13]
N
Nabavi, Zohreh
A Hybrid Model for Back-Break Prediction using XGBoost Machine learning and Metaheuristic Algorithms in Chadormalu Iron Mine [Volume 14, Issue 2, 2023, Pages 689-712]
Naderi, H.
Gallium extraction from Jajarm Bayer process liquor using micro-emulsions [Volume 8, Issue 2, 2017, Pages 269-276]
Naderi, H.
Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]
Naderi, Hojat
Kinetics of chemical leaching of chalcocite from low-grade copper ore: size-distribution behavior [Volume 6, Issue 1, 2015, Pages 109-118]
Naderi, M.
Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching [Volume 8, Issue 4, 2017, Pages 523-537]
Nag, Aditi
Tourism Management with AI Integration for Mining Heritage: a Literature Review Approach [Volume 15, Issue 1, 2024, Pages 115-149]
Nag, Aditi
Mining Ghost Town Revitalization through Heritage Tourism Initiatives [Volume 15, Issue 2, 2024, Pages 439-461]
Nag, Aditi
Exploring Dark Tourism in Mining Heritage: Competitiveness and Ethical Dilemmas [(Articles in Press)]
Nag, Aditi
Revitalizing Mining Heritage Tourism: A Machine Learning Approach to Tourism Management [(Articles in Press)]
Najafi, Abbas
Alumina Extraction by Lime-soda Sinter Process from Low-grade Bauxite Soil of Semirom Mine [Volume 13, Issue 4, 2022, Pages 1159-1169]
Najafi, M.
Probabilistic analysis of stability of chain pillars in Tabas coal mine in Iran using Monte Carlo simulation [Volume 7, Issue 1, 2016, Pages 25-35]
Najafi, M.
A boundary element/finite difference analysis of subsidence phenomenon due to underground structures [Volume 8, Issue 2, 2017, Pages 237-253]
Najafi, M.
Determination of a suitable extraction equipment in mechanized longwall mining in steeply inclined coal seams using fuzzy analytical hierarchy method (Case study: Hamkar coal mine, Iran) [Volume 8, Issue 3, 2017, Pages 487-499]
Najafi, M.
Stability analysis of support systems using a coupled FEM-DFN model (Case study: a diversion tunnel at Lorestan dam site, Iran) [Volume 9, Issue 2, 2018, Pages 485-497]
Najafi, M.
Cavity Growth in Underground Coal Gasification Method by Considering Cleat Length and Inclination of Coal with Elasto-Brittle Behavior [Volume 13, Issue 2, 2022, Pages 607-625]
Najafi, Mehdi
Prediction of Roof Failure in Pre-driven Entries and Selecting a Suitable Type of Recovery Room Method in Longwall Mining [Volume 15, Issue 1, 2024, Pages 223-237]
Najafi, Mehdi
Discrete elements analysis of sand production mechanism in oil well considering effects of in situ stress and fluid pressure [(Articles in Press)]
Najafi, Mehdi
A New method for stability analysis of chain pillar in longwall mining by using Coulmann graphical method [(Articles in Press)]
Najafi Ghoshebolagh, S.
An Exploration Model for A Gold Deposit in Kervian Area, Kurdistan Province, Iran, using a Combination of Geophysical Results with Geological Information and Other Exploratory Data [Volume 12, Issue 2, 2021, Pages 413-424]
Namdarmanesh, Amir
Investigation of Shear Properties of Open Non-persistent Latitudinal Discontinuities of Same Level [Volume 14, Issue 4, 2023, Pages 1361-1371]
Naser, F.
Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]
Naseri, F.
Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]
Nasrollahzadeh, Amirmohammad
Bio-flotation of Chalcopyrite using Halophilic Bacteria Separately and Their Combination as Pyrite bio-Depressant [Volume 13, Issue 4, 2022, Pages 1119-1138]
Nasrollahzadeh Bafti, Amir Mohammad
Investigating possibility of replacing some chemical reagents used in sulfide copper flotation with halophilic bacteria [Volume 14, Issue 1, 2023, Pages 243-258]
Nassar, Tamer
Change Detection of Surface Water of Atfih Spring by Integrated Effect of Rainfall Storms and Geological Structures using Landsat Data [Volume 14, Issue 1, 2023, Pages 79-96]
Nasseri, Aynur
Machine Learning Predictive Approaches for Cu-Au Mineral prospectivity Map in Sonajil, NW of Iran: an Improvement by a Bayesian Semi-supervised Algorithm [Volume 14, Issue 4, 2023, Pages 1321-1342]
Nautiyal, Akhilesh
Sustainable Approach for Geometric Design of Highway using OpenRoads: a Case Study of NH-05 [Volume 14, Issue 3, 2023, Pages 825-837]
Navarro Torres, V.F
Assessment of natural attenuation of acid mine drainage pollutants in El Bierzo and Odiel basins: A case study [Volume 2, Issue 2, 2011, Pages 78-85]
Navarro Torres, V.F
Environmental Hazards Associated With Mining Activities in the Vicinity of Bolivian Poopó Lake [Volume 3, Issue 1, 2012, Pages 15-26]
Navarro-Torres, V. F.
Assessment of water quality due to Wolfram mining in Portugal [Volume 1, Number 2, 2010]
Navi, Nooshin
Recovery of Iron from Bauxite Red Mud by Reduction Roasting Method [Volume 14, Issue 4, 2023, Pages 1295-1305]
Nawazish, Adeel
Selection of Appropriate Probability Distributions for Rock Analysis using Laser-induced Breakdown Spectroscopy [Volume 13, Issue 4, 2022, Pages 997-1013]
Nazari, M.
Airflow inside tunnel boring machine: A numerical study and an experimental verification [Volume 10, Issue 3, 2019, Pages 623-632]
Nazari, S.
Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]
Nazari, Saeed
Forward Modeling of Frequency-domain Helicopter-borne Electromagnetic Data using an Improved Finite Difference Method [Volume 13, Issue 4, 2022, Pages 1067-1089]
Nazempour, M. M.
An Analytical Method of Predicting Length of Grout Penetration in Jointed Rocks [Volume 12, Issue 4, 2021, Pages 1155-1175]
Nazeri, M.
Random forests algorithm in podiform chromite prospectivity mapping in Dolatabad area, SE Iran [Volume 9, Issue 2, 2018, Pages 403-416]
Nazerigivi, A.
On Applicability of Some Indirect Tests for Estimation of Tensile Strength of Anisotropic Rocks [Volume 11, Issue 3, 2020, Pages 711-720]
Ndip, E. A.
Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]
Nedaei, Mahnaz
Investigation of Fractures Effect on Building Stone Utilization: a Case Study [Volume 14, Issue 2, 2023, Pages 565-576]
Negahdarzadeh, Y.
Porosity classification from thin sections using image analysis and neural networks including shallow and deep learning in Jahrum formation [Volume 9, Issue 2, 2018, Pages 513-525]
Nehrii, S. Hryhorovych
Substantiating Parameters of Reinforced Rock Supports [Volume 12, Issue 4, 2021, Pages 953-967]
Nehrii, Serhii Hryhorovych
Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]
Nehrii, T. Oleksandrivna
Substantiating Parameters of Reinforced Rock Supports [Volume 12, Issue 4, 2021, Pages 953-967]
Nehrii, Tetiana Oleksandrivna
Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]
Nejati, H. R.
A new brittleness index for estimation of rock fracture toughness [Volume 8, Issue 1, 2017, Pages 83-91]
Nejati, H. R.
Study of Damaged Zone around Circular Opening Using Acoustic Emission Technique [Volume 11, Issue 2, 2020, Pages 433-451]
Nejati, H. R.
On Applicability of Some Indirect Tests for Estimation of Tensile Strength of Anisotropic Rocks [Volume 11, Issue 3, 2020, Pages 711-720]
Nejati Kalate, A.
3D gravity data-space inversion with sparseness and bound constraints [Volume 8, Issue 2, 2017, Pages 227-235]
Nejati Kalateh, A.
Underground contour (UGC) mapping using potential field, well log and comparing with seismic interpretation in Lavarestan area [Volume 6, Issue 1, 2015, Pages 55-62]
Nejati Kalateh, A.
Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]
Nejati Kalateh, A.
Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]
Nejati Kalateh, Ali
Estimation of 3D density distribution of chromites deposit using gravity data [Volume 4, Issue 2, 2013, Pages 97-104]
Nemati akhgar, B.
Characterization of microstructural changes of mechanically activated ilmenite [Volume 12, Issue 2, 2021, Pages 515-528]
Nemati akhgar, Behzad
Cyanide Removal from Tailing Slurry of Gold Processing Plant using Surfactant-modified Zeolite [Volume 15, Issue 1, 2024, Pages 285-300]
Nemati Akhgar, B.
Comparison between Helical and Elliptical Static Mixers Performance in Column Flotation of Sungun Copper Plant [Volume 11, Issue 1, 2020, Pages 221-230]
Nemattolahi, E.
Accuracy of Discrete Element Method Simulations: Rolling and Sliding Frictions Effects-Case study: Iron Ore Pellets [Volume 11, Issue 4, 2020, Pages 1205-1216]
Nezafat, Hamed
Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]
Nezamabadipour, Hossain
Adaptive Neuro-Fuzzy Inference System application for hydrothermal alteration mapping using ASTER data [Volume 4, Issue 2, 2013, Pages 83-96]
Nezarat, H.R.
Airflow inside tunnel boring machine: A numerical study and an experimental verification [Volume 10, Issue 3, 2019, Pages 623-632]
Nguimatsia, F. W.D.
Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]
Nikakhtar, L.
Numerical Modelling of Backfill Grouting Approaches in EPB Tunneling [Volume 11, Issue 1, 2020, Pages 301-314]
Nikakhtar, Leila
Performance Comparison of Particle Swarm Optimization and Genetic Algorithm for Back-analysis of Soil Layer Geotechnical Parameters [Volume 14, Issue 1, 2023, Pages 217-232]
Nikbakhsh, Ehsan
A Novel Sustainable Multi-objective Optimization Model for Steel Supply Chain Design Considering Technical and Managerial Issues: a Case Study [Volume 14, Issue 1, 2023, Pages 295-319]
Nikkhah, M.
Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel) [Volume 8, Issue 1, 2017, Pages 111-130]
Nikkhah, M.
Numerical assessment of influence of confining stress on Kaiser effect using distinct element method [Volume 8, Issue 2, 2017, Pages 215-226]
Nikkhah, M.
A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]
Nikkhah, M.
Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]
Nikkhah, M.
Sensitivity Analysis of Stress and Cracking in Rock Mass Blasting using Numerical Modelling [Volume 11, Issue 4, 2020, Pages 1141-1155]
Nikoogoftar, H.
Delineation of alteration zones based on artificial neural networks and concentration-volume fractal methods in the hypogene zone of porphyry copper-gold deposit, Masjed-Daghi, East Azerbaijan Province, Iran [Volume 10, Issue 4, 2019, Pages 883-901]
Nikoogoftar Safa, H.
Application of fractal modeling to delineate alteration zones and lithological units in Masjed-Daghi Cu-Au porphyry deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 339-356]
Nikouei Mahani, Ali
Effect of Stable Nano-microbubbles on Sulfide Copper Flotation and Reduction of Chemicals Dosage [Volume 15, Issue 1, 2024, Pages 261-283]
Niromand, Morteza
Evaluation of the Slope Stability under Geological Conditions Using Multi-Factorial Fuzzy Classification System [(Articles in Press)]
Noaparast, M.
Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills [Volume 2, Issue 1, 2011]
Noaparast, M.
Iron leaching from bauxite ore in hydrochloric acid using response surface methodology [Volume 6, Issue 1, 2015, Pages 103-108]
Noaparast, M.
A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]
Noaparast, M.
Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]
Noaparast, M.
Dissolution of Nickel and Cobalt from Iron-Rich Laterite Ores Using Different Organic Acids [Volume 11, Issue 3, 2020, Pages 779-797]
Noaparast, M.
Modeling and Optimizing Aluminum Hydroxide Precipitation Process in Industrial Scale; case study: Iran Alumina Plant [Volume 12, Issue 1, 2021, Pages 235-251]
Noaparast, M.
Direct and Indirect Bio-Leaching of Co and Ni from an Iron-Rich Laterite Ore using Delftia Acidovorans and Acidithiobacillus Ferrooxidans [Volume 12, Issue 2, 2021, Pages 471-489]
Noaparast, Mohammad
Implementation of flotation and gravity separation, to process Changarzeh sulfide-oxide lead ore [Volume 3, Issue 2, 2012, Pages 79-87]
Noaparast, Mohammad
A developed approach based on grinding time to determine ore comminution properties [Volume 4, Issue 2, 2013, Pages 105-112]
Noaparast, Mohammad
Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill [Volume 5, Issue 2, 2014, Pages 121-128]
Noaparast, Mohammad
An Environmentally Friendly Method for Recovery of Metals from Cathode Material of Lithium-Ion Batteries using L-Glutamic, Malonic, and Ascorbic acid [Volume 13, Issue 4, 2022, Pages 1171-1188]
Noori, M.
Use of density tracers in evaluating performance of Tri-Flo circuits Case study: Tabas (Iran) coal preparation plant [Volume 10, Issue 2, 2019, Pages 441-450]
Noorzad, A.
An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]
Noorzad, Ali
Evaluation of Effects of Parameters of Blast Damage Factor, Sub-drilling, Decoupling, and Inter-hole Delay Time on Peak Particle Velocity using Numerical Modeling [Volume 14, Issue 2, 2023, Pages 545-563]
Noparast, M.
Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district [Volume 6, Issue 2, 2015, Pages 237-249]
Nordin, N. F.
A Preliminary Assessment of Rock Slope Stability in Tropical Climates: A Case Study at Lafarge Quarry, Perak, Malaysia [Volume 11, Issue 3, 2020, Pages 661-673]
Noriega Vidal, Eduardo Manuel
Copper ore grade prediction using Machine Learning techniques in a copper deposit [(Articles in Press)]
Noroozi, M.
3D stochastic rock fracture modeling related to strike-slip faults [Volume 6, Issue 2, 2015, Pages 169-181]
Noroozi, M.
Stability analysis of support systems using a coupled FEM-DFN model (Case study: a diversion tunnel at Lorestan dam site, Iran) [Volume 9, Issue 2, 2018, Pages 485-497]
Norouzi, Gh. H.
Geostatistical Modeling of Electrical Resistivity Tomography for Imaging Porphyry Cu Mineralization in Takht-e-Gonbad Deposit, Iran [Volume 11, Issue 1, 2020, Pages 143-159]
Norouzi, Gholam-Hossain
Approximate resistivity and susceptibility mapping from airborne electromagnetic and magnetic data, a case study for a geologically plausible porphyry copper unit in Iran [Volume 4, Issue 2, 2013, Pages 133-146]
Norouzi Baghkameh, Gh. H.
Stable Downward Continuation of Airborne Potential Field Geophysical Data: an Investigation of Stabilizer Family [Volume 12, Issue 2, 2021, Pages 547-567]
Norouzi Masir, R.
Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]
Norouzi Masir, R.
Risk assessment of Flyrock in Surface Mines using a FFTA-MCDM Combination [Volume 12, Issue 1, 2021, Pages 191-203]
Nosrati Abarghooei, M.
Geochemical Study of Rare Earth Elements Content in Tabas Coal Ash, Parvadeh Coal Mine [Volume 12, Issue 4, 2021, Pages 1143-1153]
Nouar, K.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Nouri, Reza
Multifractal modelling of gold mineralization and lineaments in the 1:100,000 Chaapaan sheet (NW IRAN) [Volume 14, Issue 3, 2023, Pages 973-980]
Nouri-Bidgoli, H.
An Experimental and CFD Investigation on Effect of Initial Bubble Diameter on its Rise Velocity Profile in A Laboratory-Scale Flotation Column Cell [Volume 12, Issue 4, 2021, Pages 1089-1102]
Nouri Qarahasanlou, A.
Maintainability measure based on operating environment, a case study: Sungun copper mine [Volume 8, Issue 3, 2017, Pages 511-521]
Nouri Qarahasanlou, A.
Analysis of reliability and maintainability for multiple repairable units (Case study: Sungun copper mine) [Volume 10, Issue 4, 2019, Pages 1045-1059]
Nouri Qarahasanlou, A.
Expected Proportional Hazard Model in Preventive Maintenance [Volume 12, Issue 3, 2021, Pages 753-767]
Nouri Qarahasanlou, Ali
Pre-existing Crack Effect on Damage of Inner Concrete Lining under an Internal Explosion: A Numerical Study [Volume 14, Issue 3, 2023, Pages 945-960]
Nouri Qarahasanlou, Ali
Operating Environmental Condition Effect on Reliability-Centred Maintenance [Volume 14, Issue 2, 2023, Pages 667-688]
Nouri Qarahasanlou, Ali
Multi-criteria Decision-making Methods for Sustainable Decision-making in the Mining Industry (A Comprehensive Study) [Volume 15, Issue 2, 2024, Pages 683-706]
Nouri Qarahasanlou, Ali
Urban Tunneling Risk Management: Ground Settlement Assessment through Proportional Hazards Modeling [(Articles in Press)]
Nourizadeh, H.
Monitoring and assessment of pollutants resulting from bench-blasting operations [Volume 7, Issue 1, 2016, Pages 109-118]
Nyarko, K.B.
Operational dynamics of “Galamsey” within eleven selected districts of western region of Ghana [Volume 8, Issue 1, 2017, Pages 11-34]
Nyazyan, Navid
Assessment of Effect of Rock Properties on Horizontal Drilling Rate in Marble Quarry Mining: Field and Experimental Studies [Volume 14, Issue 1, 2023, Pages 321-339]
Nzali, S.
Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]
O
Ogundiran, Michael
Mine Geo-environment Assessment: Carbonate Rock Mine Waste as Construction Material Addictive and Coupled with Pollution Index Model [Volume 14, Issue 1, 2023, Pages 179-196]
Ogunyemi, O B
Mine Geo-environment Assessment: Carbonate Rock Mine Waste as Construction Material Addictive and Coupled with Pollution Index Model [Volume 14, Issue 1, 2023, Pages 179-196]
Ogunyemi, Olaoluwa Bidemi
Granite Downstream Production Dependent Size and Profitability Assessment: an application of Mathematical-based Artificial Intelligence Model and WipFrag Software [Volume 15, Issue 2, 2024, Pages 497-515]
Ojo, Samuel Adebayo
Ecological Risk Analysis of Stream Sediments Data and Impact on Aquatic Biota around Mining and Agricultural Regions [Volume 15, Issue 2, 2024, Pages 517-536]
Olatubara, C. O.
Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]
Omeyoma, S.
Mine Geo-environment Assessment: Carbonate Rock Mine Waste as Construction Material Addictive and Coupled with Pollution Index Model [Volume 14, Issue 1, 2023, Pages 179-196]
Omidi, Mohammad Hassan
Box-Behnken Design of Experiments Investigation forAdsorption of Cd2+ onto carboxymethyl Chitosan Magnetic Nanoparticles [Volume 3, Issue 1, 2012, Pages 51-59]
Omidi manesh, Mohammad
Investigation of Fracture Toughness of Shotcrete using Semi-Circular Bend Test and Notched Brazilian Disc test; Experimental Test and Numerical Approach [Volume 14, Issue 1, 2023, Pages 233-242]
Omidi manesh, Mohammad
Investigation of External Work, Fracture Energy, and Fracture Toughness of Oil Well Cement Sheath using HCCD Test and CSTBD Test [Volume 14, Issue 2, 2023, Pages 619-634]
Omidi manesh, Mohammad
Failure Mechanism of Rock Pillar Containing Two Edge Notches: Experimental Test and Numerical Simulation [Volume 14, Issue 3, 2023, Pages 961-971]
Omosebi, A O
Mine Geo-environment Assessment: Carbonate Rock Mine Waste as Construction Material Addictive and Coupled with Pollution Index Model [Volume 14, Issue 1, 2023, Pages 179-196]
Ongarbayev, Ilyas
Anisotropic Inverse Distance Weighting Method: An Innovative Technique for Resource Modeling of Vein-type Deposits [Volume 13, Issue 4, 2022, Pages 957-972]
Oni, Oluwaseun Augustine
Artificial Neural Network Modeling as an Approach to Limestone Blast Production Rate Prediction: a Comparison of PI-BANN and MVR Models [Volume 14, Issue 2, 2023, Pages 375-388]
Onyelowe, K.
Developing New Models for Flyrock Distance Assessment in Open-Pit Mines [Volume 13, Issue 2, 2022, Pages 375-389]
Osanloo, M.
UPL determination of multi-element deposits with grade uncertainty using a new block economic value calculation approach [Volume 9, Issue 1, 2018, Pages 61-72]
Osanloo, M.
Determination of an Optimum Interface between Open-Pit and Underground Mining Activities in Mazinu Coal Mine of Tabas Power Plant [Volume 12, Issue 1, 2021, Pages 139-149]
Oskouei, Majid Mohammady
Classification of ASTER Data by Neural Network to Mapping Alterations Related to Copper and Iron Mineralization in Birjand [Volume 15, Issue 2, 2024, Pages 649-665]
Osmanpour, Ava
Financial Risk Management Prediction of Mining and Industrial Projects using Combination of Artificial Intelligence and Simulation Methods [Volume 13, Issue 4, 2022, Pages 1211-1223]
Otari, M.
Geochemical and environmental assessment of heavy metals in soils and sediments of Forumad Chromite mine, NE of Iran [Volume 6, Issue 2, 2015, Pages 251-261]
Otoo, Francis
Radiological Baseline Assessment of a Naturally Occurring Radioactive Material (NORM) Waste Disposal Facility in Ghana [Volume 14, Issue 1, 2023, Pages 33-46]
Owolabi, A.
Assessment of Terrain and Land Use/Land Cover Changes of Mine Sites using Geospatial Techniques in Plateau State, Nigeria [Volume 11, Issue 4, 2020, Pages 935-948]
Owolabi, A.O.
Assessment of radioactive contamination in water bodies around mine workings using radiation counter [Volume 9, Issue 4, 2018, Pages 795-806]
Owolabi, Ayodele
Geotechnical Evaluation of Mine Wastes for Utilization in Embarkment Construction in Jos, Central Nigeria [Volume 15, Issue 2, 2024, Pages 427-438]
Owusu-Nimo, F.
Operational dynamics of “Galamsey” within eleven selected districts of western region of Ghana [Volume 8, Issue 1, 2017, Pages 11-34]
Ozcelik, Y.
Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]
Ozcelik, Y.
Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]
Ozkan, S. G.
A review of simultaneous ultrasound-assisted coal flotation [Volume 9, Issue 3, 2018, Pages 679-689]
P
P, Porchelvan
Finite Element Analysis of Seismic Hazard in Post-mining Environments of Closed Underground Hard Rock Mines [Volume 15, Issue 1, 2024, Pages 73-96]
Pak, Kwang Hyok
Simulation of Pyrrhotite Removal from Scheelite Ore by Magnetic Force in Table Concentration [Volume 14, Issue 4, 2023, Pages 1219-1237]
Pak, Myong Chun
Suitable Mining Method Selection using HFGDM-TOPSIS Method: a Case Study of an Apatite Mine [Volume 13, Issue 2, 2022, Pages 357-374]
Pandey, Jai Krishna
Detection of Surface and Sub-surface Coal Mine Fire of Jharia Coalfields using Remotely Sensed and Ground Thermal Data [Volume 15, Issue 1, 2024, Pages 1-19]
Pandey, Jitendra
Detection of Surface and Sub-surface Coal Mine Fire of Jharia Coalfields using Remotely Sensed and Ground Thermal Data [Volume 15, Issue 1, 2024, Pages 1-19]
Parhizkar, A.
Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]
Parnow, S.
Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method [Volume 8, Issue 1, 2017, Pages 103-110]
Parsapour, D.
Interaction of Excavated Tunnels by Earth Pressure Balance Machines and Sub-surface Obstacles; Case Study: Tehran Metro Line 7 [Volume 12, Issue 3, 2021, Pages 799-814]
Parsapour, Gh. A.
Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade [Volume 8, Issue 4, 2017, Pages 539-544]
Parsapour, Gh.A.
Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]
Paryad, H.
Effects of operating parameters on time-dependent ash entrainment behaviour of a sample coal flotation [Volume 8, Issue 3, 2017, Pages 337-357]
Pasand Masoumi, H.R.
Calculation of Optimum Soil Conditioning in EPB Tunneling (Case Study: Ahwaz Metro Project, Line 1) [Volume 12, Issue 2, 2021, Pages 501-513]
Pashapour, Arash
Relationship between fracture dip angle, aperture and fluid flow in the fractured rock masses [Volume 2, Issue 2, 2011, Pages 136-145]
Pathan, A.G.
Determination of ground water quality associated with lignite mining in arid climate [Volume 1, Number 1, 2010]
Pavlov, Y. Yevhenovych
Substantiating Parameters of Reinforced Rock Supports [Volume 12, Issue 4, 2021, Pages 953-967]
Pham, Th. L.
Study on an Online Vibration Measurement System for Seismic Waves Caused by Blasting for Mining in Vietnam [Volume 12, Issue 2, 2021, Pages 313-325]
Piervandi, Z.
A Proposed Biochemical Protocol to Isolate and Characterize Acidophilic Bacteria from Tailings Soil [Volume 11, Issue 4, 2020, Pages 1157-1171]
Pillay, Natillio
Numerical Study of Behavior of Eccentric-inclined Loaded Strip Footing Resting above a Soil Mass Containing a Void [Volume 14, Issue 3, 2023, Pages 909-927]
Pipatpongsa, T.
Influence of modeling material on undercut slope failure mechanism [Volume 8, Issue 4, 2017, Pages 645-662]
Pipatpongsa, T.
Numerical Stability Analysis of Undercut Slopes Evaluated by Response Surface Methodology [Volume 12, Issue 1, 2021, Pages 31-43]
Piri, Mostafa
An Experimental-Intelligent Method to Predict Noise Value of Drilling in Dimension Stone Industry [Volume 13, Issue 3, 2022, Pages 693-713]
Piroozfar, Sh.
Design of An Intelligent Model for Strategic Planning in Mineral Holding: Case study, Shahab-Sang Holding [Volume 11, Issue 4, 2020, Pages 1115-1126]
Piskurska, H. Viktorivna
Substantiating Parameters of Reinforced Rock Supports [Volume 12, Issue 4, 2021, Pages 953-967]
Poormirzaee, R.
Joint inversion of ReMi dispersion curves and refraction travel times using particle swarm optimization algorithm [Volume 7, Issue 1, 2016, Pages 67-79]
Porkhial, S.
Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]
Porter, I.
Impacts of coal shrinkage, permeability and petrography on gas regime in mines Case study: Tahmoor coal mine, NSW, Australia [Volume 1, Number 1, 2010]
Pouresmaeili, E.
A New Semi-Quantitative Approach to Open-Pit Mine Sustainability Assessment [Volume 11, Issue 4, 2020, Pages 1191-1203]
Pouresmaieli, Mahdi
Multi-criteria Decision-making Methods for Sustainable Decision-making in the Mining Industry (A Comprehensive Study) [Volume 15, Issue 2, 2024, Pages 683-706]
Pourghahramani, P.
Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]
Pourghahramani, P.
Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]
Pourghahramani, P.
Characterization of microstructural changes of mechanically activated ilmenite [Volume 12, Issue 2, 2021, Pages 515-528]
Pourghahramani, P.
Characterization of Leaching Feed and Residue of Mechanically Activated Sphalerite [Volume 12, Issue 4, 2021, Pages 1029-1040]
Pourghasemi Sagand, M.
A Modified Indirect Boundary Element Analysis for Fatigue Behavior Assessment of Rock-Like Materials Based on Linear Elastic Fracture Mechanics [Volume 12, Issue 4, 2021, Pages 1189-1203]
Pourgholam, M. M.
Delineation of Iron Alteration Zones using Spectrum-Area Fractal Model and TOPSIS Decision-Making Method in Tarom Metallogenic Zone, NW Iran [Volume 13, Issue 2, 2022, Pages 503-525]
Pourhashemi, Seyed M.
Analysis of Grinding and Chipping Processes beneath Disc Cutters of Hard Rock Tunnel Boring Machines (Case study: Uma-Oya water Conveyance Tunnel, SriLanka) [Volume 12, Issue 1, 2021, Pages 281-297]
Pourkarimi, Ziaeddin
Mineralogy and Characterisation Studies Aimed at Coal Desulfurization Process on Iran’s Largest Coalfield [Volume 14, Issue 1, 2023, Pages 277-293]
Pourkarimi, Ziaeddin
Bioflotation and Bioleaching as an Alternative Method for Desulphurization and Ash Reduction in Tabas Coal [Volume 15, Issue 2, 2024, Pages 581-595]
Pourkermani, Mohsen
Geometrical Analysis of Fractures and Mineralized Veins of Gazkhizan Copper Deposit in Semnan Province, Iran [Volume 14, Issue 1, 2023, Pages 197-216]
Pourmazaheri, Y.
Wellbore Trajectory Optimization of an Iranian Oilfield Based on Mud Pressure and Failure Zone [Volume 11, Issue 1, 2020, Pages 193-220]
Pourrahim, M.
Concentration and recycling of rare earth elements (REEs) from iron mine waste using a combination of physical separation methods [Volume 7, Issue 2, 2016, Pages 195-203]
Pourrahimian, Y.
Application of Sequential Gaussian Conditional Simulation to Underground Mine Design Under Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 695-709]
Poursalehi, R.
An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]
Pourshaabadi, J.
Low-Cost Approaches to Promote Performance of Comminution Circuit at Steel-Sirjan Iron Ore Complex [Volume 12, Issue 4, 2021, Pages 1065-1076]
Pourzamani, E.
Comparison of golden section search method and imperialist competitive algorithm for optimization cut-off grade- case study: Mine No. 1 of Golgohar [Volume 6, Issue 1, 2015, Pages 63-71]
Pramanik, Jitendra
Applications of IoT Framework for Underground Mine Safety: Limitations and Solutions [(Articles in Press)]
Q
Qaderi, Farhad
Optimizing Hybrid Photocatalytic-ozonation for Offshore Produced Water Treatment [Volume 15, Issue 1, 2024, Pages 239-259]
Qazi, Areeba
Rock Mass Classification Techniques and Parameters: a Review [Volume 14, Issue 1, 2023, Pages 155-178]
Qureshi, A. R.
Comparative Analysis of Coal Miner’s Fatalities by Fuzzy Logic [Volume 12, Issue 1, 2021, Pages 77-87]
R
Rabiei, Hadiseh
Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]
Rabiei, M.
A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]
Rabieian, Masoud
Optimizing Hybrid Photocatalytic-ozonation for Offshore Produced Water Treatment [Volume 15, Issue 1, 2024, Pages 239-259]
Radmehr, V.
Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]
Rafiee, R.
Determination of a suitable extraction equipment in mechanized longwall mining in steeply inclined coal seams using fuzzy analytical hierarchy method (Case study: Hamkar coal mine, Iran) [Volume 8, Issue 3, 2017, Pages 487-499]
Rafiee, R.
Stability analysis of support systems using a coupled FEM-DFN model (Case study: a diversion tunnel at Lorestan dam site, Iran) [Volume 9, Issue 2, 2018, Pages 485-497]
Rafiee, R.
Improvement of coal mine roof rating classification using fuzzy type-2 [Volume 9, Issue 3, 2018, Pages 691-701]
Rafiee, R.
Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]
Rafiee, Ramin
Sustainability Analysis of Waste Dump in Mine No. 4 of Golgohar, Sirjan, for Purpose of Increasing Waste Dump Volume [Volume 14, Issue 4, 2023, Pages 1373-1391]
Rafiee, Ramin
Investigating Effect of Induced Stresses due to Coal Panel Extraction on Next Panel Strata behavior during Mechanized Longwall Mining: a Case Study [Volume 15, Issue 1, 2024, Pages 381-399]
Rafiee, Ramin
A New method for stability analysis of chain pillar in longwall mining by using Coulmann graphical method [(Articles in Press)]
Rahbar, K.
Delineation of Iron Alteration Zones using Spectrum-Area Fractal Model and TOPSIS Decision-Making Method in Tarom Metallogenic Zone, NW Iran [Volume 13, Issue 2, 2022, Pages 503-525]
Rahimi, E.
Detection of Zones Based on Ore and Gangue Using Fractal and Multivariate Analysis in Chah Gaz Iron Ore Deposit, Central Iran [Volume 11, Issue 2, 2020, Pages 453-466]
Rahimi, H.
Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]
Rahimi, Mehdi
Mineralogy and Characterisation Studies Aimed at Coal Desulfurization Process on Iran’s Largest Coalfield [Volume 14, Issue 1, 2023, Pages 277-293]
Rahimi, Sh.
CFD Modeling of Impact of Gas Content Uncertainty on Methane Distribution in Underground Coal Mine Roadways [Volume 13, Issue 2, 2022, Pages 493-502]
Rahimian, M. H.
Multiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics [Volume 4, Issue 1, 2013, Pages 67-76]
Rahimipour, Gh. R.
Anomaly delineation of porphyry copper deposits of Hanza Region through geochemical data analyses and multispectral remote sensing [Volume 10, Issue 3, 2019, Pages 747-762]
Rahimpour Bonab, H.
Influence of Physical and Chemical Material Properties on Mining Soil Erosion Processes Around Mineral Salts Company in Mighan playa, Arak, Iran [Volume 12, Issue 3, 2021, Pages 725-741]
Rahimzadeh-Nanekaran, Farshad
Performance Evaluation of a Haul Truck Allocation Model in the Sungun Copper Mine [(Articles in Press)]
Rahmani, Ali Akbar
Box-Behnken Design of Experiments Investigation forAdsorption of Cd2+ onto carboxymethyl Chitosan Magnetic Nanoparticles [Volume 3, Issue 1, 2012, Pages 51-59]
Rahmanian kooshkaki, Ahmad
Mineralogy and Characterisation Studies Aimed at Coal Desulfurization Process on Iran’s Largest Coalfield [Volume 14, Issue 1, 2023, Pages 277-293]
Rahmannejad, R.
Analytical analysis of ultimate ground pressure on tunnel support system [Volume 6, Issue 2, 2015, Pages 151-157]
Rahmannejad, Reza
Calculation of tunnel behavior in viscoelastic rock mass [Volume 4, Issue 1, 2013, Pages 27-33]
Rahmanpour, M.
A New Mathematical Model for Production Scheduling in Sub-level Caving Mining Method [Volume 11, Issue 3, 2020, Pages 765-778]
Rahmanpour, M.
Evaluation of Underground Mineable Reserve in Presence of Grade and Commodity Price Uncertainties [Volume 12, Issue 2, 2021, Pages 385-396]
Rajabi, M. J.
Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade [Volume 8, Issue 4, 2017, Pages 539-544]
Rajaee, A.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Ramadi, R
A developed approach based on grinding time to determine ore comminution properties [Volume 4, Issue 2, 2013, Pages 105-112]
Ramazi, Hamid Reza
Mineral Prospectivity modeling with airborne geophysics and geochemistry data, A case study of Shahr-e-Babak study area, southeastern Iran [(Articles in Press)]
Ramazi, H. R.
3D model construction of induced polarization and resistivity data with quantifying uncertainties using geostatistical methods and drilling (Case study: Madan Bozorg, Iran) [Volume 9, Issue 4, 2018, Pages 857-872]
Ramazi, H. R.
A programming method to estimate proximate parameters of coal beds from well-logging data using a sequential solving of linear equation systems [Volume 10, Issue 3, 2019, Pages 633-647]
Ramazi, H. R.
A New 3D Model for Shear Wave Velocity by Utilizing Conventional Petrophysical Logs and Geostatistical Method [Volume 13, Issue 2, 2022, Pages 431-447]
Ramezanalizadeh, T.
Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects [Volume 11, Issue 2, 2020, Pages 577-586]
Ramezani, E.
Effect of Acid Rain on Physical and Mechanical Properties of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 1, 2022, Pages 185-200]
Ramezani, Esmaeel
Effect of Acidic Water on Physico-Mechanical Properties of Concrete Containing Micro-Silica [Volume 14, Issue 2, 2023, Pages 653-666]
Ramezanizadeh, M.
Prediction of effect of fine particle removal on efficiency of a spiral circuit by size-by-size partition curves [Volume 8, Issue 4, 2017, Pages 567-571]
Ramezanzadeh, A.
A state-of-the-art review of mechanical rock excavation technologies [Volume 1, Number 1, 2010]
Ramezanzadeh, A.
Studying empirical correlation between drilling specific energy and geo-mechanical parameters in an oil field in SW Iran [Volume 8, Issue 3, 2017, Pages 393-401]
Ramezanzadeh, A.
Determination of constant coefficients of Bourgoyne and Young drilling rate model using a novel evolutionary algorithm [Volume 8, Issue 4, 2017, Pages 693-702]
Ramezanzadeh, A.
Prediction of ultimate strength of shale using artificial neural network [Volume 9, Issue 1, 2018, Pages 91-105]
Ramezanzadeh, A.
New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]
Ramezanzadeh, A.
Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]
Ramezanzadeh, A.
Stability Analysis of Salt Cavern Gas Storage Using 2D Thermo-Hydro-Mechanical Finite-Element Software [Volume 11, Issue 1, 2020, Pages 77-97]
Ramezanzadeh, Ahmad
Numerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: A case study of Bakhtiary Dam of Iran [Volume 4, Issue 1, 2013, Pages 15-26]
Ranjbar, Gh. H
Effect of segmental joint stiffness on tunnel lining internal forces under static conditions [Volume 10, Issue 4, 2019, Pages 1031-1043]
Ranjbar, Gh.H.
Effect of Segmental Joint on Internal Forces in Tunnel Lining under Seismic Loading by Numerical Method [Volume 11, Issue 3, 2020, Pages 737-751]
Ranjbar, H.
Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]
Ranjbar, H.
Anomaly delineation of porphyry copper deposits of Hanza Region through geochemical data analyses and multispectral remote sensing [Volume 10, Issue 3, 2019, Pages 747-762]
Ranjbar, Hojatollah
Adaptive Neuro-Fuzzy Inference System application for hydrothermal alteration mapping using ASTER data [Volume 4, Issue 2, 2013, Pages 83-96]
Rao, Raghupatruni Bhima
Preparation of High Purity Graphite using Comminution, Pressure Leaching and Flotation [Volume 14, Issue 4, 2023, Pages 1205-1218]
Raouf Hosseini, S. M.
Mineralogical and physical beneficiation studies for iron extraction from Bardaskan titanomagnetite placer deposit [Volume 8, Issue 2, 2017, Pages 191-201]
Rasouli, H.
A New Case-Based Reasoning Method for Prediction of Fractured Height of Longwall Panels [Volume 12, Issue 4, 2021, Pages 1103-1121]
Rasouli, V.
The impact of poor cementing casing damage: A numerical simulation study [Volume 6, Issue 1, 2015, Pages 41-53]
Rasouli, V.
A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]
Rasouli, V.
Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]
Rasouli, V.
Application of Machine Learning Models for Predicting Rock Fracture Toughness Mode-I and Mode-II [Volume 13, Issue 2, 2022, Pages 465-480]
Rasouli, Vamegh
Wellbore associated problems due to gas injection into non-horizontal structures [Volume 3, Issue 2, 2012, Pages 113-119]
Rastegar, F.
On Applicability of Some Indirect Tests for Estimation of Tensile Strength of Anisotropic Rocks [Volume 11, Issue 3, 2020, Pages 711-720]
Rastegar, Morteza
Prediction of the deformation modulus of rock masses using Artificial Neural Networks and Regression methods [Volume 4, Issue 1, 2013, Pages 35-43]
Rastegarnia, M.
Development of a mechanical earth model in an Iranian off-shore gas field [Volume 7, Issue 1, 2016, Pages 37-46]
Rathore, Pankaj
Soil Stabilization using Ceramic Waste: an Experimental Study [Volume 14, Issue 1, 2023, Pages 47-65]
Ravanasa, E.
Exploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study [Volume 9, Issue 4, 2018, Pages 1009-1018]
Ravi, Anand Kumar
Ground Water Quality Analysis using Machine Learning Techniques: a Critical Appraisal [Volume 15, Issue 2, 2024, Pages 419-426]
Ravi Kiran, Podicheti
Analysis of concentration of ambient particulate matter in the surrounding area of an opencast coal mine using machine learning techniques [(Articles in Press)]
Raymond, Aderoju Oluwadolapo
Improvement of Drill Bit-Button Performance and Efficiency during Drilling: an application of LSTM Model to Nigeria Southwest Mines [Volume 14, Issue 4, 2023, Pages 1121-1139]
Raza, S.
Rock Fall Hazard Assessment using GeoRock 2D along Swat Motorway, Pakistan [Volume 12, Issue 2, 2021, Pages 351-365]
Raza, S.
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Raza, Salim
Risk Analysis and Prioritization with AHP and Fuzzy TOPSIS Techniques in Surface Mines of Pakistan [Volume 15, Issue 2, 2024, Pages 463-479]
Razavi Rad, F.
Estimation of Cadmium and Uranium in a stream sediment from Eshtehard region in Iran using an Artificial Neural Network [Volume 7, Issue 1, 2016, Pages 97-107]
Razi, E.
Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]
Razi, E.
Accuracy of Discrete Element Method Simulations: Rolling and Sliding Frictions Effects-Case study: Iron Ore Pellets [Volume 11, Issue 4, 2020, Pages 1205-1216]
Razmjooei, S.
Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]
Razzaghzadeh, R.
Analysis of reliability and maintainability for multiple repairable units (Case study: Sungun copper mine) [Volume 10, Issue 4, 2019, Pages 1045-1059]
Rehman, H. Ur
Analysis and Forecast of Mining Accidents in Pakistan [Volume 11, Issue 4, 2020, Pages 967-976]
Rehman, H.
Application of Stochastic Simulation in Assessing Effect of Particle Morphology on Fracture Characteristics of Sandstone [Volume 12, Issue 4, 2021, Pages 969-986]
Rehman, Hafeez Ur
Evaluating Microscale Failure Response of Various Weathering Grade Sandstones Based on Micro-Scale Observation and Micro-Structural Modelling Subjected to Wet and Dry Cycles [Volume 13, Issue 2, 2022, Pages 341-355]
Rehman, Hafeez Ur
Analysis of Granite Failure Modes and Energy Conversion under Uniaxial Compression at Various Temperatures [Volume 14, Issue 2, 2023, Pages 493-506]
Rehman, Hafeezur
The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]
Rehman, Hafeezur
Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]
Rehman, Z. Ur
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Resekh, H.
Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]
Rezaee, H.
On the reduction of the ordinary kriging smoothing effect [Volume 2, Issue 2, 2011, Pages 102-117]
Rezaee Rad, M.
Investigation of parameters affecting desilication of diasporic bauxite in Jajarm mine by thermo-chemical treatment [Volume 8, Issue 1, 2017, Pages 75-81]
Rezaee Shahzadehaliakbari, Zahra
Geometrical Analysis of Fractures and Mineralized Veins of Gazkhizan Copper Deposit in Semnan Province, Iran [Volume 14, Issue 1, 2023, Pages 197-216]
Rezaei, A.
Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]
Rezaei, A.H.
Effects of Flocculant, Surfactant, Coagulant, and Filter Aid on Efficiency of Filtration Processing of Copper Concentrate: Mechanism and Optimization [Volume 11, Issue 1, 2020, Pages 119-141]
Rezaei, Amir
Investigation of Fracture Toughness of Shotcrete using Semi-Circular Bend Test and Notched Brazilian Disc test; Experimental Test and Numerical Approach [Volume 14, Issue 1, 2023, Pages 233-242]
Rezaei, Amir
Investigation of External Work, Fracture Energy, and Fracture Toughness of Oil Well Cement Sheath using HCCD Test and CSTBD Test [Volume 14, Issue 2, 2023, Pages 619-634]
Rezaei, Amir
Failure Mechanism of Rock Pillar Containing Two Edge Notches: Experimental Test and Numerical Simulation [Volume 14, Issue 3, 2023, Pages 961-971]
Rezaei, Kh.
Evaluation of Fractal Variance-Distance Model in Identifying Geochemical Anomalies of Calamine Mehdiabad Mining Complex, Central Iran [Volume 12, Issue 1, 2021, Pages 45-62]
Rezaei, M.
Long-term stability analysis of goaf area in longwall mining using minimum potential energy theory [Volume 9, Issue 1, 2018, Pages 169-182]
Rezaei, M.
Predicting Unconfined Compressive Strength of Intact Rock Using New Hybrid Intelligent Models [Volume 11, Issue 1, 2020, Pages 231-246]
Rezaei, Mohammad
Assessment of Effect of Rock Properties on Horizontal Drilling Rate in Marble Quarry Mining: Field and Experimental Studies [Volume 14, Issue 1, 2023, Pages 321-339]
Rezaei, Mohammad
An Integrated Geo-Statistical Methodology for an Optimum Resource Estimation of Angouran Underground Mine [Volume 14, Issue 2, 2023, Pages 635-651]
Rezaei, R.
Negative impacts of mine exploitations on rural regions of Tekab Township [Volume 7, Issue 1, 2016, Pages 57-66]
Rezaei, Sajjad
Sustainability Analysis of Waste Dump in Mine No. 4 of Golgohar, Sirjan, for Purpose of Increasing Waste Dump Volume [Volume 14, Issue 4, 2023, Pages 1373-1391]
Rezaei, Sh.
Estimation of Pb and Zn Elements using Adaptive Neuro-Fuzzy Inference System (Case study: Gerde Kooh area, north of Yazd) [Volume 13, Issue 2, 2022, Pages 449-464]
Rezaei, Z.
Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]
Rezai, B.
Concentration and recycling of rare earth elements (REEs) from iron mine waste using a combination of physical separation methods [Volume 7, Issue 2, 2016, Pages 195-203]
Rezai, B.
Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]
Rezai, B.
Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]
Rezai, B.
X-Ray mapping and the mineralogy pattern of nickel laterite ore: Bavanat, Fars, Iran [Volume 10, Issue 3, 2019, Pages 811-820]
Rezai, B.
Comparative and Competitive Study of LDH/Diatomite and Chitosan/Diatomite for Adsorptive Removal of Chloride Ion from Aqueous Solution [Volume 11, Issue 1, 2020, Pages 261-279]
Rezai, B.
Development of Geometallurgical Indices for Semi-Autogenous Grinding at Sarcheshmeh Porphyry Copper Mine [Volume 11, Issue 2, 2020, Pages 375-385]
Rezaie, M.
3D gravity data-space inversion with sparseness and bound constraints [Volume 8, Issue 2, 2017, Pages 227-235]
Rezaie, M.
A new method for 3-D magnetic data inversion with physical bound [Volume 8, Issue 3, 2017, Pages 501-510]
Rezaie, M.
Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]
Ri, Hyon Hyok
Determination of Mechanical Parameters of Anthracite Coal using Flying Squirrel Search Algorithm with Timber Load and Displacement Data [Volume 15, Issue 1, 2024, Pages 21-40]
R.N. Singh, Prof
Assessment of natural attenuation of acid mine drainage pollutants in El Bierzo and Odiel basins: A case study [Volume 2, Issue 2, 2011, Pages 78-85]
Roshandel kahoo, Amin
Estimation of 3D density distribution of chromites deposit using gravity data [Volume 4, Issue 2, 2013, Pages 97-104]
Roshandel Kahoo, A.
Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]
Rostami, J.
Determination of scratching energy index for Cerchar abrasion test [Volume 9, Issue 1, 2018, Pages 73-89]
Rostami, Jamal
Real-Scale Numerical Analyzing Dynamic Process of TBM Boring in Jointed Rock; a Case Study: Kerman Water Conveyance Tunnel in Iran [Volume 13, Issue 3, 2022, Pages 643-666]
Rostami, M.
Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]
Roudini, A.
Selection of chromite processing plant site using fuzzy analytic hierarchy process (FAHP) [Volume 8, Issue 2, 2017, Pages 155-162]
Roy, Amrit Kumar
Slope Stability Analysis and Preventive Actions for a Landslide Location along NH-05 in Himachal Pradesh, India [Volume 13, Issue 3, 2022, Pages 667-678]
Roy, Amrit Kumar
Assessment of Slope Stability and Its Remedies in Palampur, Himachal Pradesh [Volume 13, Issue 3, 2022, Pages 767-780]
Roy, Amrit Kumar
Formulation of a Bearing Capacity Equation for a Circular Footing with Vertical and Inclined Loads on Layered Sand [Volume 13, Issue 4, 2022, Pages 1015-1029]
Ryom, Chol Ung
Simulation of Pyrrhotite Removal from Scheelite Ore by Magnetic Force in Table Concentration [Volume 14, Issue 4, 2023, Pages 1219-1237]
S
Sa'ari, Radzuan
3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]
Saadat, S.
Geochemistry, petrology, and mineralization in volcanic rocks located in south Neyshabour, NE Iran [Volume 8, Issue 2, 2017, Pages 139-154]
Saadat, S.
Comparison of various knowledge-driven and logistic-based mineral prospectivity methods to generate Cu and Au exploration targets Case study: Feyz-Abad area (North of Lut block, NE Iran) [Volume 8, Issue 4, 2017, Pages 611-629]
Saadat, Saeed
Evaluating a Sediment Pollution using Contamination Indices and Risk Assessment in Mineralized Zones, Eastern Iran [Volume 13, Issue 4, 2022, Pages 1239-1253]
Sabeti, H.
A new stochastic 3D seismic inversion using direct sequential simulation and co-simulation in a genetic algorithm framework [Volume 8, Issue 3, 2017, Pages 321-335]
Sabeti, H.
A Practical Comparison between Gaussian and Direct Sequential Simulation Algorithms using a 3D Porosity Dataset [Volume 13, Issue 2, 2022, Pages 547-557]
Sabzian, A.
Assessment of Heavy Metal Contamination in Waters due to Mineral Salts Company from Mighan playa/lake, Arak, Iran [Volume 11, Issue 1, 2020, Pages 171-184]
Sadati, Ali akbar
Alumina Extraction by Lime-soda Sinter Process from Low-grade Bauxite Soil of Semirom Mine [Volume 13, Issue 4, 2022, Pages 1159-1169]
Sadegheslam, G.
Ranking sawability of dimension stone using PROMETHEE method [Volume 6, Issue 2, 2015, Pages 263-271]
Sadeghi, M.
Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]
Sadough Abbasian, F.
Comparative and Competitive Study of LDH/Diatomite and Chitosan/Diatomite for Adsorptive Removal of Chloride Ion from Aqueous Solution [Volume 11, Issue 1, 2020, Pages 261-279]
Sadr, M. P.
Random forests algorithm in podiform chromite prospectivity mapping in Dolatabad area, SE Iran [Volume 9, Issue 2, 2018, Pages 403-416]
Sadrmohammadi, N.
Evaluation of Fractal Variance-Distance Model in Identifying Geochemical Anomalies of Calamine Mehdiabad Mining Complex, Central Iran [Volume 12, Issue 1, 2021, Pages 45-62]
Saeedi, Gholamreza
Investigation of Shear Properties of Open Non-persistent Latitudinal Discontinuities of Same Level [Volume 14, Issue 4, 2023, Pages 1361-1371]
Saeedi, Gholamreza
On the 2D discrete element analyses of the transversely isotropic elastic geo-materials; insight to scale effects and loading rate [(Articles in Press)]
Saeidi, Negar
A developed approach based on grinding time to determine ore comminution properties [Volume 4, Issue 2, 2013, Pages 105-112]
Saeidi, Omid
Numerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: A case study of Bakhtiary Dam of Iran [Volume 4, Issue 1, 2013, Pages 15-26]
Safaei, Mohammad Reza
Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]
Safari Sinegani, A. A.
Using Trifolium Alexanderium for Phytoremediation of some heavy metals in tailings dam in Anjir-Tange coal washing plant, Mazandaran, Iran [Volume 6, Issue 2, 2015, Pages 141-150]
Safari Sinegani, S.
Using Trifolium Alexanderium for Phytoremediation of some heavy metals in tailings dam in Anjir-Tange coal washing plant, Mazandaran, Iran [Volume 6, Issue 2, 2015, Pages 141-150]
Safari Sinegani, S.
Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]
Saffari, A.
Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]
Saffari, A.
Studying Relationship between Coal Intrinsic Characteristics in Spontaneous Combustion of Coal Potential Using Crossing Point Temperature Test Method [Volume 11, Issue 1, 2020, Pages 315-333]
Saffari, A.
Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]
Saghafiyazdi, M.
Effects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar [Volume 10, Issue 4, 2019, Pages 967-978]
Saghatforoush, Amir
Evaluation the Effect of Blast Pattern on Post-Failure Rate around the Miyaneh-Ardabil Railway Tunnel [(Articles in Press)]
Saghravani, Seyed F.
Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]
Sahafzadeh, M.
Integrating Geophysical Attributes with New Cuckoo Search Machine-Learning Algorithm to Estimate Silver Grade Values–Case Study: Zarshouran Gold Mine [Volume 11, Issue 3, 2020, Pages 865-879]
Sahoo, Arun Kumar
Application of machine learning techniques in slope stability analysis: A comprehensive overview [(Articles in Press)]
Said, Said Mohamed
Change Detection of Surface Water of Atfih Spring by Integrated Effect of Rainfall Storms and Geological Structures using Landsat Data [Volume 14, Issue 1, 2023, Pages 79-96]
Said, Said Mohamed
Implementation of Space-Borne Optical Data and Field Investigation for Geo-structural Mapping of an Interior Rift Basin: A Case Study from Kharit Area, Southeastern Desert, Egypt1037 [Volume 14, Issue 4, 2023, Pages 1037-1059]
Saini, Anant
Bearing Capacity of Circular Footing Resting on Recycled Construction Waste Materials using ANN Method [Volume 15, Issue 1, 2024, Pages 97-114]
Sajid, M. J.
Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]
Sajid, M. J.
Comparative Analysis of Coal Miner’s Fatalities by Fuzzy Logic [Volume 12, Issue 1, 2021, Pages 77-87]
Sakizadeh, M.
A comparative study of performance of K-nearest neighbors and support vector machines for classification of groundwater [Volume 7, Issue 2, 2016, Pages 149-164]
Sakizadeh, M.
A new method to consider spatial risk assessment of cross-correlated heavy metals using geo-statistical simulation [Volume 8, Issue 3, 2017, Pages 373-391]
Sakran, Shawky M
Implementation of Space-Borne Optical Data and Field Investigation for Geo-structural Mapping of an Interior Rift Basin: A Case Study from Kharit Area, Southeastern Desert, Egypt1037 [Volume 14, Issue 4, 2023, Pages 1037-1059]
Salarian, S.
Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]
Salari Rad, H.
On Analytic Solutions of Elastic Net Displacements around a Circular Tunnel [Volume 11, Issue 2, 2020, Pages 419-432]
Salehfard, M.
A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]
Salem, Adel M
Rate of Penetration Prediction in Drilling Operation in Oil and Gas Wells by K-nearest Neighbors and Multi-layer Perceptron Algorithms [Volume 14, Issue 3, 2023, Pages 755-770]
Salimi, A.
Sub-pixel classification of hydrothermal alteration zones using a kernel-based method and hyperspectral data; A case study of Sarcheshmeh Porphyry Copper Mine and surrounding area, Kerman, Iran [Volume 8, Issue 4, 2017, Pages 555-565]
Salimi, Amir
Fractal Modeling of Geochemical Mineralization Prospectivity Index based on Centered Log-Ratio Transformed Data for Geochemical Targeting: a Case Study of Cu Porphyry Mineralization [Volume 13, Issue 3, 2022, Pages 821-838]
Salimi, Amir
Should Geochemical Indicators Be Integrated to Produce Enhanced Signatures of Mineral Deposits? A Discussion with Regard to Exploration Scale [Volume 14, Issue 3, 2023, Pages 1011-1018]
Saljoughi, B. Shokouh
Delineation of Alteration Zones Based on Wavelet Neural Network (WNN) and Concentration–Volume (C-V) Fractal Methods in the Hypogene Zone of Porphyry Copper Deposit, Shahr-e-Babak District, SE Iran [Volume 11, Issue 4, 2020, Pages 1173-1190]
Saljoughi, Bashir Shokouh
A Comparative Analysis of Artificial Neural Network (ANN) and Gene Expression Programming (GEP) Data-driven Models for Prospecting Porphyry Cu Mineralization; Case Study of Shahr-e-Babak Area, Kerman Province, SE Iran [Volume 15, Issue 2, 2024, Pages 761-790]
Salman, M.
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Salu, Sahrul Poalahi
The Impact of Mine Opening Expansion on Slope Stability: A Case Study in North Konawe, Southeast Sulawesi Province, Indonesia [(Articles in Press)]
Samadhiya, Narendra Kumar
Response of Underground Tunnels to Combined Dynamic Loadings of Running Metro-train and Earthquake [Volume 14, Issue 1, 2023, Pages 113-131]
Samadi, M.
Metal(loid) uptake of Sonchus oleraceus grown around Cheshmeh-Konan copper deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 517-528]
Samadzadeh Yazdi, Mohamad Reza
Alumina Extraction by Lime-soda Sinter Process from Low-grade Bauxite Soil of Semirom Mine [Volume 13, Issue 4, 2022, Pages 1159-1169]
Samadzadeh Yazdi, Mohammad Reza
Predicting Arsenic Behavior in the Wastewater of Mouteh Gold Plant by Geochemical Modeling [Volume 4, Issue 1, 2013, Pages 57-65]
Samadzadeh Yazdi, M. R.
Comparison of Copper Dissolution in Chalcopyrite Concentrate Bioleaching with Acidianus Brierleyi in Different Initial pH Values [Volume 11, Issue 3, 2020, Pages 753-764]
Samal, Dr Abhaya Kumar
Applications of IoT Framework for Underground Mine Safety: Limitations and Solutions [(Articles in Press)]
Samani, R.
Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods [Volume 13, Issue 1, 2022, Pages 269-280]
Samieinejad, M. M.
A field investigation of application of digital terrestrial photogrammetry to characterize geometric properties of discontinuities in open-pit slopes [Volume 8, Issue 3, 2017, Pages 455-465]
Samir, Kamar
Application of Remote Sensing in Lithological Mapping of Umm Tawat Precambrian Rock Assemblage, North Eastern Desert, Egypt [Volume 14, Issue 2, 2023, Pages 473-491]
Samiselo, W.
Wedge Failure Analysis of the Slope Subjected to Uplift Forces by Analytical Method at Chingola Open Pits F & D [Volume 12, Issue 4, 2021, Pages 941-952]
Samui, Pijush
Soil liquefaction susceptibility of Akcay residential area (Biga Peninsula, Turkey) close to North Anatolian Fault Zone [Volume 14, Issue 4, 2023, Pages 1141-1153]
Sanei, Manouchehr
Discrete elements analysis of sand production mechanism in oil well considering effects of in situ stress and fluid pressure [(Articles in Press)]
Saneie, M.
Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]
Santos, J. F.
Geochemistry, petrology, and mineralization in volcanic rocks located in south Neyshabour, NE Iran [Volume 8, Issue 2, 2017, Pages 139-154]
Sarda, Madhusudan
Stability Analysis and Construction of Highest Gabion Wall of its own Kind in India - a Case Study [Volume 15, Issue 1, 2024, Pages 191-202]
Saremi, Mobin
Combination of geochemical and structural data to determine the exploration target of copper hydrothermal deposits in the Feizabad district [(Articles in Press)]
Sarfaraz, H.
Numerical analysis of slide-head-toppling failure [Volume 10, Issue 4, 2019, Pages 1001-1011]
Sarfaraz, H.
Numerical Modeling of Rock Slopes with a Potential of Block-Flexural Toppling Failure [Volume 11, Issue 1, 2020, Pages 247-259]
Sarfaraz, H.
Stability analysis of block-flexural toppling of rock blocks with round edges [Volume 11, Issue 4, 2020, Pages 1217-1229]
Sarfaraz, H.
Numerical Stability Analysis of Undercut Slopes Evaluated by Response Surface Methodology [Volume 12, Issue 1, 2021, Pages 31-43]
Sarfaraz, H.
Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods [Volume 13, Issue 1, 2022, Pages 269-280]
Sarfaraz, Hassan
Block Toppling Stability of Rock Block with Rounded Edges using Sarma Approach [Volume 14, Issue 1, 2023, Pages 341-353]
Sarfarazi, V.
Behavior of a Tunnel and its Neighboring Joint with and without Presence of Rock Bolt under Biaxial Loads; Particle Flow Code Approach [Volume 11, Issue 3, 2020, Pages 855-864]
Sarfarazi, V.
Numerical Investigation of Effect of Rock Bolt Angle on Shear Behavior of Rock Bridges [Volume 11, Issue 4, 2020, Pages 1007-1022]
Sarfarazi, V.
Study of Rock Pillar Failure Consisting of Non-Persistent Joint using Experimental Test and Fracture Analysis Code in Two Dimensions [Volume 12, Issue 1, 2021, Pages 163-179]
Sarfarazi, V.
On Direct Tensile Strength Measuring of Anisotropic Rocks [Volume 12, Issue 2, 2021, Pages 491-499]
Sarfarazi, V.
Compressive Failure Analyses of Rock-Like Materials by Experimental and Numerical Methods [Volume 12, Issue 3, 2021, Pages 769-783]
Sarfarazi, V.
Interaction between Tunnel and Surface Foundation using PFC2D [Volume 12, Issue 3, 2021, Pages 785-798]
Sarfarazi, V.
Effect of Confining Pressure on Is(50) Obtained by Point Load Test [Volume 12, Issue 4, 2021, Pages 1019-1028]
Sarfarazi, V.
On Propagation Mechanism of Cracks Emanating from Two Neighboring Holes in Cubic Concrete Specimens under Various Lateral Confinements [Volume 12, Issue 4, 2021, Pages 1003-1017]
Sarfarazi, V.
Influence of Single Tunnel and Twin Tunnel on Collapse Pattern and Maximum Ground Movement [Volume 13, Issue 1, 2022, Pages 117-128]
Sarfarazi, V.
Interaction between One Internal Hole and Two Neighboring Joints under Uniaxial Compression using an Experimental Test and a Numerical Simulation [Volume 13, Issue 2, 2022, Pages 407-420]
Sarfarazi, Vahab
Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]
Sarfarazi, Vahab
Preparation of Heterogeneous Rock-Like Samples Containing Non-Persistent Notch; Different Layout [Volume 13, Issue 4, 2022, Pages 1139-1157]
Sarfarazi, Vahab
PFC Simulation of Brazilian Tensile Strength Test in Geomaterials’ Specimens with T-shaped Non-persistent Joints [Volume 13, Issue 4, 2022, Pages 1189-1209]
Sarfarazi, Vahab
Investigation of Fracture Toughness of Shotcrete using Semi-Circular Bend Test and Notched Brazilian Disc test; Experimental Test and Numerical Approach [Volume 14, Issue 1, 2023, Pages 233-242]
Sarfarazi, Vahab
Investigation of External Work, Fracture Energy, and Fracture Toughness of Oil Well Cement Sheath using HCCD Test and CSTBD Test [Volume 14, Issue 2, 2023, Pages 619-634]
Sarfarazi, Vahab
Failure Mechanism of Rock Pillar Containing Two Edge Notches: Experimental Test and Numerical Simulation [Volume 14, Issue 3, 2023, Pages 961-971]
Sarfarazi, Vahab
Investigation of Shear Properties of Open Non-persistent Latitudinal Discontinuities of Same Level [Volume 14, Issue 4, 2023, Pages 1361-1371]
Sari, Mahmut
3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]
Sarlak, Mohadeseh
Block Toppling Stability of Rock Block with Rounded Edges using Sarma Approach [Volume 14, Issue 1, 2023, Pages 341-353]
Satari, R.
Copper Price Prediction using Wave Count with Contribution of Elliott Waves [Volume 11, Issue 3, 2020, Pages 825-835]
Sattari, M. T.
A new method to consider spatial risk assessment of cross-correlated heavy metals using geo-statistical simulation [Volume 8, Issue 3, 2017, Pages 373-391]
Sattarvand, J.
Commodity price uncertainty propagation in open-pit mine production planning by Latin hypercube sampling method [Volume 7, Issue 2, 2016, Pages 215-227]
Sayadi, Ahmad Reza
A Novel Sustainable Multi-objective Optimization Model for Steel Supply Chain Design Considering Technical and Managerial Issues: a Case Study [Volume 14, Issue 1, 2023, Pages 295-319]
Sayadi, A. R.
Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects [Volume 11, Issue 2, 2020, Pages 577-586]
Sayadi, A. R.
Highest-Level Implementation of Push–Relabel Algorithm to Solve Ultimate Pit Limit Problem [Volume 12, Issue 2, 2021, Pages 443-455]
Sayadi, Shahrbanou
Effect of Tunnel Location Related to Inclined Coal Strata on Excavation-Induced Displacements of Mine Tunnel: Application of Calibrated Numerical Model [Volume 15, Issue 1, 2024, Pages 203-221]
Sayed, Farouk
Implementation of Remote Sensing Techniques in Structural and Lithological Mapping of Northwestern Margin of Red Sea, Egypt [Volume 14, Issue 2, 2023, Pages 389-411]
Sazid, Mohammed
Granite Downstream Production Dependent Size and Profitability Assessment: an application of Mathematical-based Artificial Intelligence Model and WipFrag Software [Volume 15, Issue 2, 2024, Pages 497-515]
Sedighi, H.
Geochemical Study of Rare Earth Elements Content in Tabas Coal Ash, Parvadeh Coal Mine [Volume 12, Issue 4, 2021, Pages 1143-1153]
Seifpanahi Shabani, K.
Selection of new exploration targets using lithogeochemical data obtained for Taknar deposit located in NE of Iran [Volume 6, Issue 1, 2015, Pages 11-20]
Seifpanahi Shabani, K.
Magnetic Nano mineral and acid mine drainage interaction: An experimental study [Volume 8, Issue 3, 2017, Pages 447-453]
Seifpanahi Shabani, K.
Pre-treatment of toxic element and cationic dye onto natural biomass: characterization and optimization [Volume 10, Issue 3, 2019, Pages 649-658]
Seifpanahi Shabani, K.
Experimental Studies, Response Surface Methodology and Molecular Modeling for Optimization and Mechanism Analysis of Methylene Blue Dye Removal by Different Clays [Volume 11, Issue 4, 2020, Pages 1079-1093]
Selim, Samir
Predicting Gabal Gattar Uranium Content as a Function of Total Gamma-ray and Thorium Contents using an Artificial Neural Network in Northeastern Desert, Egypt [Volume 15, Issue 1, 2024, Pages 175-189]
Senemari, S.
A fuzzy-based prognosis of ore mineralization potentials in Ramand region (Qazvin province) [Volume 8, Issue 3, 2017, Pages 403-418]
Sepehri, S.
A 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks [Volume 11, Issue 2, 2020, Pages 467-480]
Serati, M.
Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]
Sereshki, F
Development of a new creep testing equipment to obtain long-term deformation parameters of salt rocks [Volume 3, Issue 1, 2012, Pages 27-32]
Sereshki, F.
Impacts of coal shrinkage, permeability and petrography on gas regime in mines Case study: Tahmoor coal mine, NSW, Australia [Volume 1, Number 1, 2010]
Sereshki, F.
Probabilistic analysis of stability of chain pillars in Tabas coal mine in Iran using Monte Carlo simulation [Volume 7, Issue 1, 2016, Pages 25-35]
Sereshki, F.
Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm [Volume 8, Issue 2, 2017, Pages 291-304]
Sereshki, F.
A quantitative model for evaluation and classification of blastings in open-pit mines [Volume 9, Issue 1, 2018, Pages 127-141]
Sereshki, F.
Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process [Volume 10, Issue 3, 2019, Pages 559-574]
Sereshki, F.
Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]
Sereshki, F.
Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]
Sereshki, F.
Studying Relationship between Coal Intrinsic Characteristics in Spontaneous Combustion of Coal Potential Using Crossing Point Temperature Test Method [Volume 11, Issue 1, 2020, Pages 315-333]
Sereshki, Farhang
Numerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: A case study of Bakhtiary Dam of Iran [Volume 4, Issue 1, 2013, Pages 15-26]
Seyed Ghasemi, Seyed M.
Investigation of leaching kinetics of zinc from a low-grade ore in organic and inorganic acids [Volume 8, Issue 4, 2017, Pages 579-591]
Seyedrahimi-Niaraq, Mirmahdi
Integration of Fractal and Multivariate Principal Component Models for Separating Pb-Zn Mineral Contaminated Areas [Volume 14, Issue 3, 2023, Pages 1019-1035]
Seyyed Alizadeh Ganji, Seyyed M.
Investigation of performances of solvents D2EHPA, Cyanex272, and their mixture system in separation of some rare earth elements from a Nitric Acid solution [Volume 7, Issue 2, 2016, Pages 143-148]
Seyyed Alizadeh Ganji, Seyyed Mohammad
Modeling, Optimizing, and Characterizing Elimination Process of Cyanide Ion from an Industrial Wastewater of Gold Mine by Caro’s Acid Method [Volume 13, Issue 3, 2022, Pages 839-849]
Shadi Naghadeh, H.
Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]
Shafaei, F.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Shafaei, Seid Ziaedin
Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill [Volume 5, Issue 2, 2014, Pages 121-128]
Shafaei, Seyed Z.
A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]
Shafaei, Seyed Z.
Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]
Shafaei, Seyed Ziaedin
Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]
Shafaei, Seyyed Zioddin
Influence of operating parameters on the Apatite flotation kinetics [Volume 4, Issue 1, 2013, Pages 45-55]
Shafaei, Sied Ziaeddin
Bioflotation and Bioleaching as an Alternative Method for Desulphurization and Ash Reduction in Tabas Coal [Volume 15, Issue 2, 2024, Pages 581-595]
Shafaei, S. Z.
An investigation of the particle size effect on coal flotation kinetics using multivariable regression [Volume 1, Number 1, 2010]
Shafaei, S.Z.
Processing of Alborz Markazi coal tailings using column flotation [Volume 2, Issue 1, 2011]
Shafaei, S.Z.
Iron leaching from bauxite ore in hydrochloric acid using response surface methodology [Volume 6, Issue 1, 2015, Pages 103-108]
Shafaei, Z
Implementation of flotation and gravity separation, to process Changarzeh sulfide-oxide lead ore [Volume 3, Issue 2, 2012, Pages 79-87]
Shafaei Tonkaboni, Sied Ziaedin
An Environmentally Friendly Method for Recovery of Metals from Cathode Material of Lithium-Ion Batteries using L-Glutamic, Malonic, and Ascorbic acid [Volume 13, Issue 4, 2022, Pages 1171-1188]
Shafaie, Seyed Z.
Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching [Volume 8, Issue 4, 2017, Pages 523-537]
Shafaie, Seyyed Z.
Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district [Volume 6, Issue 2, 2015, Pages 237-249]
Shafaie, S. Z.
Investigation of performances of solvents D2EHPA, Cyanex272, and their mixture system in separation of some rare earth elements from a Nitric Acid solution [Volume 7, Issue 2, 2016, Pages 143-148]
Shafayi, Shah H.
Ore Deposit Boundary Modification in Afghanistan Aynak Central Copper Deposit using Sequential Indicator Simulation and Indicator Kriging [Volume 13, Issue 2, 2022, Pages 325-340]
Shaffiee Haghshenas, S.
Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]
Shaffiee Haghshenas, S.
Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]
Shaffiee Haghshenas, S.
Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]
Shaffiee Haghshenas, S.
Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]
Shaffiee Haghshenas, S.
Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]
Shaffiee Haghshenas, Sina
Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]
Shaffiee Haghshenas, Sina
An Experimental-Intelligent Method to Predict Noise Value of Drilling in Dimension Stone Industry [Volume 13, Issue 3, 2022, Pages 693-713]
Shafiei Ganjeh, R.
A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]
Shah, Ahmad
Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]
Shah, K.
Modeling and Optimization of Truck-Shovel Allocation to Mining Faces in Cement Quarry [Volume 11, Issue 1, 2020, Pages 21-30]
Shah, K. Sultan
Analysis and Forecast of Mining Accidents in Pakistan [Volume 11, Issue 4, 2020, Pages 967-976]
Shah, K. Sultan
Monte Carlo Simulation-Based Uncertainty Integration into Rock Particle Shape Descriptor Distributions [Volume 12, Issue 2, 2021, Pages 299-311]
Shah, Kausar Sultan
Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]
Shah, Kausar sultan
The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]
Shah, K.S.
A Preliminary Assessment of Rock Slope Stability in Tropical Climates: A Case Study at Lafarge Quarry, Perak, Malaysia [Volume 11, Issue 3, 2020, Pages 661-673]
Shahami, Hossein
Coupling discontinuous deformation analysis and displacement discontinuity method for simulating failure mechanism in geomaterials [(Articles in Press)]
Shahani, N.
Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]
Shahani, N. Muhammad
Analysis and Forecast of Mining Accidents in Pakistan [Volume 11, Issue 4, 2020, Pages 967-976]
Shahani, N. M.
Comparative Analysis of Coal Miner’s Fatalities by Fuzzy Logic [Volume 12, Issue 1, 2021, Pages 77-87]
Shahbazi, B.
Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]
Shahbazi, Mohammadreza
Mineralogy and Characterisation Studies Aimed at Coal Desulfurization Process on Iran’s Largest Coalfield [Volume 14, Issue 1, 2023, Pages 277-293]
Shahbazi, Mohammadreza
Bioflotation and Bioleaching as an Alternative Method for Desulphurization and Ash Reduction in Tabas Coal [Volume 15, Issue 2, 2024, Pages 581-595]
Shahbazi, M.R.
Cavity Growth in Underground Coal Gasification Method by Considering Cleat Length and Inclination of Coal with Elasto-Brittle Behavior [Volume 13, Issue 2, 2022, Pages 607-625]
Shahgholi, H.
Application of perfect mixing model for simulation of vertical roller mills [Volume 8, Issue 4, 2017, Pages 545-553]
Shahhoseini, Sh.
Investigation of parameters affecting desilication of diasporic bauxite in Jajarm mine by thermo-chemical treatment [Volume 8, Issue 1, 2017, Pages 75-81]
Shahhosseini, M.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Shahi, H.
Prediction of mineral deposit model and identification of mineralization trend in depth using frequency domain of surface geochemical data in Dalli Cu-Au porphyry deposit [Volume 6, Issue 2, 2015, Pages 225-236]
Shahi, H.
Prediction of dispersed mineralization zone in depth using frequency domain of surface geochemical data [Volume 8, Issue 3, 2017, Pages 433-446]
Shahi, Hossein
A GIS-based weights-of-evidence model for mineral potential mapping of hydrothermal gold deposits in Torbat-e-Heydarieh area [Volume 5, Issue 2, 2014, Pages 79-89]
Shahpasand, Arash
Effect of Tunnel Location Related to Inclined Coal Strata on Excavation-Induced Displacements of Mine Tunnel: Application of Calibrated Numerical Model [Volume 15, Issue 1, 2024, Pages 203-221]
Shahpasand, Ashkan
Effect of Tunnel Location Related to Inclined Coal Strata on Excavation-Induced Displacements of Mine Tunnel: Application of Calibrated Numerical Model [Volume 15, Issue 1, 2024, Pages 203-221]
Shahraki, S.
Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]
Shahriar, K.
A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [Volume 6, Issue 1, 2015, Pages 73-93]
Shahriar, K.
Prediction of ultimate strength of shale using artificial neural network [Volume 9, Issue 1, 2018, Pages 91-105]
Shahriar, K.
New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]
Shahriar, K.
Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]
Shahriar, K.
An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]
Shahriar, K.
Effect of segmental joint stiffness on tunnel lining internal forces under static conditions [Volume 10, Issue 4, 2019, Pages 1031-1043]
Shahriar, K.
Method of Grading Subway Stations Based on Evacuation Capability: A Quantitative Method [Volume 11, Issue 2, 2020, Pages 587-609]
Shahriar, K.
Effect of Segmental Joint on Internal Forces in Tunnel Lining under Seismic Loading by Numerical Method [Volume 11, Issue 3, 2020, Pages 737-751]
Shahriar, K.
A New Technical and Economic Model to Calculate Specific Charge and Specific Drilling Using Hole Diameter, Bench Height, Uniaxial Compressive Strength, and Joint Set Orientation [Volume 11, Issue 4, 2020, Pages 991-1005]
Shahriar, K.
Interaction of Excavated Tunnels by Earth Pressure Balance Machines and Sub-surface Obstacles; Case Study: Tehran Metro Line 7 [Volume 12, Issue 3, 2021, Pages 799-814]
Shahriar, K.
A New Case-Based Reasoning Method for Prediction of Fractured Height of Longwall Panels [Volume 12, Issue 4, 2021, Pages 1103-1121]
Shahriar, K.
CFD-based Modeling of Sarin Gas Dispersion in a Subway Station–A Hypothetical Scenario [Volume 13, Issue 1, 2022, Pages 235-251]
Shahriar, Korosh
-Permeability Tensor Calculation of Pumped Storage Power Plant Cavern of Rudbar Lorestan Dam using Crack Tensor [Volume 14, Issue 4, 2023, Pages 1261-1272]
Shahriari, H.
Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]
Shahriari, H.
Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]
Shahsavani, H.
Processing a multifold ground penetration radar data using common-diffraction-surface stack method [Volume 10, Issue 3, 2019, Pages 777-785]
Shahverdi, M.R.
Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]
Shahverdiloo, M. R.
Challenges for In-Situ Stress Measurement in Rock Caverns by Hydraulic Fracturing and HTPF Tests-Case Study: Azad Hydropower Project [Volume 12, Issue 2, 2021, Pages 529-545]
Shakeri, Hadi
Investigating Effect of Soil Grading Parameters on Tool Wear in Mechanized Tunneling using EPB-TBM Machine [Volume 15, Issue 1, 2024, Pages 301-321]
Shakeri, J.
Developing New Models for Flyrock Distance Assessment in Open-Pit Mines [Volume 13, Issue 2, 2022, Pages 375-389]
Shakoor Shahabi, R.
Analysis of reliability and maintainability for multiple repairable units (Case study: Sungun copper mine) [Volume 10, Issue 4, 2019, Pages 1045-1059]
Shakoor Shahabi, R.
Expected Proportional Hazard Model in Preventive Maintenance [Volume 12, Issue 3, 2021, Pages 753-767]
Shakya, Rahul
Response of Underground Tunnels to Combined Dynamic Loadings of Running Metro-train and Earthquake [Volume 14, Issue 1, 2023, Pages 113-131]
Shakya, Rahul
A Study on Seismic Analysis of Underground Tunnels for Delhi Metro [Volume 14, Issue 3, 2023, Pages 731-754]
Shakya, Rahul
Three-Dimensional Elasto-Plastic Analysis of Delhi Metro Underground Tunnels under Seismic Loading [Volume 15, Issue 2, 2024, Pages 401-417]
Shamsi, M.
Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district [Volume 6, Issue 2, 2015, Pages 237-249]
Shamsi, R.
Prediction of Acid Mine Drainage Generation Potential of A Copper Mine Tailings Using Gene Expression Programming-A Case Study [Volume 11, Issue 4, 2020, Pages 1127-1140]
Shamsi, R.
Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]
Shane, A.
Wedge Failure Analysis of the Slope Subjected to Uplift Forces by Analytical Method at Chingola Open Pits F & D [Volume 12, Issue 4, 2021, Pages 941-952]
Shankar, Vijay
An Overview of Relationship between Hydro-Thermo-Mechanical Soil Parameters and Electrical Resistivity [Volume 14, Issue 1, 2023, Pages 97-112]
Shankar, Vijay
Hydrogeophysical Survey for Assessment of Groundwater Budget and Aquifer Protection in Hilly Terrain [Volume 14, Issue 4, 2023, Pages 1061-1079]
Shariat, M.
Evaluation of Mine Reclamation Criteria using Delphi-Fuzzy Approach [Volume 12, Issue 2, 2021, Pages 367-384]
Shariati, M
Development of a new creep testing equipment to obtain long-term deformation parameters of salt rocks [Volume 3, Issue 1, 2012, Pages 27-32]
Sharifi, F.
Using a combination of genetic algorithm and particle swarm optimization algorithm for GEMTIP modeling of spectral-induced polarization data [Volume 10, Issue 2, 2019, Pages 493-505]
Sharifi, Fereydoun
Karstic water exploration using the Schlumberger VES and dipole–dipole resistivity profiling surveys in the Tepal area, west of Shahrood, Iran [Volume 5, Issue 1, 2014, Pages 1-12]
Sharifi, Fereydoun
Forward Modeling of Frequency-domain Helicopter-borne Electromagnetic Data using an Improved Finite Difference Method [Volume 13, Issue 4, 2022, Pages 1067-1089]
Sharma, Abhishek
Applications of GIS and Remote Sensing in Highway Project: a Review [Volume 14, Issue 2, 2023, Pages 375-388]
Sharma, Abhishek
Estimation of Land Surface Temperature of Sahibzada Ajit Singh Nagar, Punjab, India [Volume 14, Issue 2, 2023, Pages 527-544]
Sharma, Abhishek
Sub-grade Characteristics of Flexible Pavements Incorporating Shredded Face Mask in Clayey Soil [Volume 14, Issue 3, 2023, Pages 789-797]
Sharma, Abhishek
Sustainable Utilization of Waste Foundry Sand and Sodium Chloride in Soil Stabilization [Volume 14, Issue 3, 2023, Pages 897-908]
Sharma, Abhishek
Numerical Simulation of Piled-Raft Foundation in Cohesionless Soil using ABAQUS [Volume 14, Issue 4, 2023, Pages 1183-1203]
Sharma, Anurag
Analysis of Land Subsidence in Joshimath Township using GIS and Remote Sensing [(Articles in Press)]
Sharma, M.
A Comparative Study of Machine Learning Methods for Prediction of Blast-Induced Ground Vibration [Volume 12, Issue 3, 2021, Pages 667-677]
Sharma, Priyangi
Estimation of Land Surface Temperature of Sahibzada Ajit Singh Nagar, Punjab, India [Volume 14, Issue 2, 2023, Pages 527-544]
Sharma, Priyangi
Analysis of Land Subsidence in Joshimath Township using GIS and Remote Sensing [(Articles in Press)]
Sharma, Ravi Kumar
Spatial Prediction of Landslide Hazard using GIS-multi-criteria Decision Analysis in Kullu District of Himachal Pradesh, India [Volume 13, Issue 4, 2022, Pages 943-956]
Sharma, Ravi Kumar
Site Response Analysis and Empirical Correlations between N-Values and Shear Modulus for Sub-Himalayan District Hamirpur using ProShake [Volume 13, Issue 4, 2022, Pages 1031-1047]
Sharma, Ravi Kumar
Numerical Analysis of Square and Circular Skirted Footings Placed on Sand using PLAXIS 3D Software [Volume 13, Issue 4, 2022, Pages 1049-1066]
Sharma, Ravi Kumar
Numerical Analysis of Inclined Granular Pile Anchor Subjected to Uplift Forces in Expansive Soil using Abaqus [Volume 14, Issue 2, 2023, Pages 413-434]
Sharma, Ravi Kumar
Improvement of Geotechnical Properties of Soil using Calcium Carbide, Waste Foundry Sand and Polypropylene Fibre [Volume 14, Issue 2, 2023, Pages 449-471]
Sharma, Ravi Kumar
Bearing Capacity Evaluation of Square Footing Resting on Reinforced Sand [Volume 14, Issue 3, 2023, Pages 813-824]
Sharma, Ravi Kumar
Numerical Analysis of Strip Footing Behaviour on a Hollow Pile Stabilized Clay Slope [Volume 14, Issue 3, 2023, Pages 799-811]
Sharma, Ravi Kumar Kumar
Estimation of Ground Motion Amplification for Sub-Himalayan Strata due to Hypothetical Earthquake Motions [Volume 14, Issue 2, 2023, Pages 507-525]
Sharma, Vaibhav
Numerical Study of Behavior of Eccentric-inclined Loaded Strip Footing Resting above a Soil Mass Containing a Void [Volume 14, Issue 3, 2023, Pages 909-927]
Sharma, Vivek
Site Response Analysis and Empirical Correlations between N-Values and Shear Modulus for Sub-Himalayan District Hamirpur using ProShake [Volume 13, Issue 4, 2022, Pages 1031-1047]
Sharma, Vivek
Estimation of Ground Motion Amplification for Sub-Himalayan Strata due to Hypothetical Earthquake Motions [Volume 14, Issue 2, 2023, Pages 507-525]
Shayestefar, M.R.
Applying Analytical and Quantitative Criteria to Estimate Block Model Uncertainty and Mineral Reserve Classification: A Case Study: Khoshumi Uranium Deposit in Yazd [Volume 12, Issue 2, 2021, Pages 425-441]
Sheikh Zakariaee, Seyed J.
Influence of Physical and Chemical Material Properties on Mining Soil Erosion Processes Around Mineral Salts Company in Mighan playa, Arak, Iran [Volume 12, Issue 3, 2021, Pages 725-741]
Shekhawat, Poonam
Evaluation of Pressure-Settlement Response of Square Footing Rested on Sand Reinforced with Coir Geotextile [Volume 15, Issue 2, 2024, Pages 481-495]
Shenavar, M.
A New Mathematical Model for Production Scheduling in Sub-level Caving Mining Method [Volume 11, Issue 3, 2020, Pages 765-778]
Shenavar, M.
Evaluation of Underground Mineable Reserve in Presence of Grade and Commodity Price Uncertainties [Volume 12, Issue 2, 2021, Pages 385-396]
Sherin, S.
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Sherin, Saira
Risk Analysis and Prioritization with AHP and Fuzzy TOPSIS Techniques in Surface Mines of Pakistan [Volume 15, Issue 2, 2024, Pages 463-479]
Shided, Ahmed Gaber
Implementation of Remote Sensing Techniques in Structural and Lithological Mapping of Northwestern Margin of Red Sea, Egypt [Volume 14, Issue 2, 2023, Pages 389-411]
Shirani Faradonbeh, Roohollah
Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]
Shirinabadi, R.
A 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks [Volume 11, Issue 2, 2020, Pages 467-480]
Shirinabadi, Reza
Design, Manufacture, and Perform of First Electronic Seismic Sensor Dilatometer in Project of Tehran Metro line 6 as a Rapid Environmentally Friendly in-situ Test with Less Soil Disturbance [Volume 13, Issue 4, 2022, Pages 1107-1118]
Shojaatlhosseini, Seyed A.
Determination of a suitable extraction equipment in mechanized longwall mining in steeply inclined coal seams using fuzzy analytical hierarchy method (Case study: Hamkar coal mine, Iran) [Volume 8, Issue 3, 2017, Pages 487-499]
Shojaei, V.
Effects of operating parameters on time-dependent ash entrainment behaviour of a sample coal flotation [Volume 8, Issue 3, 2017, Pages 337-357]
Shojaei, V.
Adsorptive Study of Cadmium Removal from Aqueous Solution Using a Coal Waste Loaded with Fe3O4 Nanoparticles [Volume 13, Issue 2, 2022, Pages 527-545]
Shokouh Saljoughi, B.
A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]
Shokouh Saljoughi, B.
A comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran [Volume 9, Issue 4, 2018, Pages 917-940]
Shokouh Saljoughi, B.
Identification of geochemical anomalies associated with Cu mineralization by applying spectrum-area multi-fractal and wavelet neural network methods in Shahr-e-Babak mining area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 49-73]
Shokry, A.
Design of An Intelligent Model for Strategic Planning in Mineral Holding: Case study, Shahab-Sang Holding [Volume 11, Issue 4, 2020, Pages 1115-1126]
Siamaki, A.
Numerical analysis of energy transmission through discontinuities and fillings in Kangir Dam [Volume 7, Issue 2, 2016, Pages 251-259]
Siami, A.
A new model for mining method selection based on grey and TODIM methods [Volume 8, Issue 1, 2017, Pages 49-60]
Siddiqui, F. I.
Fault orientation modeling of Sonda- Jherruck coalfield, Pakistan [Volume 10, Issue 2, 2019, Pages 305-313]
Siemon, B.
Inverse modeling of HEM data using a new inversion algorithm [Volume 1, Number 2, 2010]
Sikakwe, Gregory Udie
Ecological Risk Analysis of Stream Sediments Data and Impact on Aquatic Biota around Mining and Agricultural Regions [Volume 15, Issue 2, 2024, Pages 517-536]
Sikakwe, G.U
Evaluation of stream sediment contamination by potentially toxic elements around mining and farming areas (SE Nigeria) [Volume 10, Issue 4, 2019, Pages 833-851]
Sin, Il Chol
Simulation of Pyrrhotite Removal from Scheelite Ore by Magnetic Force in Table Concentration [Volume 14, Issue 4, 2023, Pages 1219-1237]
Sin, Myong Nam
Determination of Mechanical Parameters of Anthracite Coal using Flying Squirrel Search Algorithm with Timber Load and Displacement Data [Volume 15, Issue 1, 2024, Pages 21-40]
Singh, Deven
Seasonal Variation in Physico-chemical Characteristics of Domestic Wastewater in Himachal Pradesh: a Case Study [Volume 14, Issue 3, 2023, Pages 771-787]
Singh, Jaspreet
Numerical Study of Behavior of Eccentric-inclined Loaded Strip Footing Resting above a Soil Mass Containing a Void [Volume 14, Issue 3, 2023, Pages 909-927]
Singh, Kanwarpreet
Landslide Susceptibility Assessment using Remote Sensing and GIS-a Review [Volume 14, Issue 1, 2023, Pages 133-154]
Singh, Kanwarpreet
Rock Mass Classification Techniques and Parameters: a Review [Volume 14, Issue 1, 2023, Pages 155-178]
Singh, Kanwarpreet
Applications of GIS and Remote Sensing in Highway Project: a Review [Volume 14, Issue 2, 2023, Pages 375-388]
Singh, Kanwarpreet
Estimation of Land Surface Temperature of Sahibzada Ajit Singh Nagar, Punjab, India [Volume 14, Issue 2, 2023, Pages 527-544]
Singh, Kanwarpreet
Sustainable Utilization of Waste Foundry Sand and Sodium Chloride in Soil Stabilization [Volume 14, Issue 3, 2023, Pages 897-908]
Singh, Kanwarpreet
Analysis of Land Subsidence in Joshimath Township using GIS and Remote Sensing [(Articles in Press)]
Singh, Karan
Impact on Mechanical and Durable Properties of Rubber and Copper Slag-based Geo-polymer Mortar using Various Sodium Hydroxide Molarities and Proportions of Alkali Activator Solutions [Volume 14, Issue 3, 2023, Pages 853-870]
Singh, Manendra
Response of Underground Tunnels to Combined Dynamic Loadings of Running Metro-train and Earthquake [Volume 14, Issue 1, 2023, Pages 113-131]
Singh, Manendra
A Study on Seismic Analysis of Underground Tunnels for Delhi Metro [Volume 14, Issue 3, 2023, Pages 731-754]
Singh, Manendra
Three-Dimensional Elasto-Plastic Analysis of Delhi Metro Underground Tunnels under Seismic Loading [Volume 15, Issue 2, 2024, Pages 401-417]
Singh, Manendra
Behavior of Horizontally Reinforced Stone Column in a Layered Soil: Enhancing Ground Improvement [Volume 15, Issue 2, 2024, Pages 537-555]
Singh, M.M
Magnitude of vibration triggering component determines safety of structures [Volume 5, Issue 1, 2014, Pages 35-46]
Singh, R. N.
Determination of ground water quality associated with lignite mining in arid climate [Volume 1, Number 1, 2010]
Singh, R. N.
Assessment of water quality due to Wolfram mining in Portugal [Volume 1, Number 2, 2010]
Singh, R.N
Environmental Hazards Associated With Mining Activities in the Vicinity of Bolivian Poopó Lake [Volume 3, Issue 1, 2012, Pages 15-26]
Singh, Siddharth
Pit lakes as an end use of mining: A review [Volume 5, Issue 2, 2014, Pages 99-111]
Singh, Sonu
An Overview of Relationship between Hydro-Thermo-Mechanical Soil Parameters and Electrical Resistivity [Volume 14, Issue 1, 2023, Pages 97-112]
Singh, Sonu
Hydrogeophysical Survey for Assessment of Groundwater Budget and Aquifer Protection in Hilly Terrain [Volume 14, Issue 4, 2023, Pages 1061-1079]
Singh, Surya Pratap
Slope Stability Analysis and Preventive Actions for a Landslide Location along NH-05 in Himachal Pradesh, India [Volume 13, Issue 3, 2022, Pages 667-678]
Singh, Surya PRATAP
Formulation of a Bearing Capacity Equation for a Circular Footing with Vertical and Inclined Loads on Layered Sand [Volume 13, Issue 4, 2022, Pages 1015-1029]
Singh, Yadvendra Pratap
A Deep Neural Network for Classification of Land Use Satellite Datasets in Mining Environments [Volume 13, Issue 3, 2022, Pages 797-808]
Sinha, Kaustubh
Estimation of Land Surface Temperature of Sahibzada Ajit Singh Nagar, Punjab, India [Volume 14, Issue 2, 2023, Pages 527-544]
Sinha, Kaustubh
Analysis of Land Subsidence in Joshimath Township using GIS and Remote Sensing [(Articles in Press)]
Siyar, R.
Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review [Volume 11, Issue 2, 2020, Pages 517-537]
So, Kwang Chol
Simulation of Pyrrhotite Removal from Scheelite Ore by Magnetic Force in Table Concentration [Volume 14, Issue 4, 2023, Pages 1219-1237]
Soares, A.
A new stochastic 3D seismic inversion using direct sequential simulation and co-simulation in a genetic algorithm framework [Volume 8, Issue 3, 2017, Pages 321-335]
Sodeifi, H.
Numerical modeling of hydraulic fracturing in carbonate rocks of Bangestan reservoir [Volume 9, Issue 1, 2018, Pages 117-126]
Sofianos, A.I.
Calculation of tunnel behavior in viscoelastic rock mass [Volume 4, Issue 1, 2013, Pages 27-33]
Sohbatzadeh, Laleh
An Environmentally Friendly Method for Recovery of Metals from Cathode Material of Lithium-Ion Batteries using L-Glutamic, Malonic, and Ascorbic acid [Volume 13, Issue 4, 2022, Pages 1171-1188]
Sohrabian, B.
Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]
Sohrabian, B.
Fuzzy tonnage-average grade model based on extension principle [Volume 10, Issue 3, 2019, Pages 659-666]
Soleimani Monfared, M.
An improvement in RTM method to image steep dip petroleum bearing structures and its superiority to other methods [Volume 8, Issue 4, 2017, Pages 573-578]
Soleymani Gharegol, Mehdi
Cyanide Removal from Tailing Slurry of Gold Processing Plant using Surfactant-modified Zeolite [Volume 15, Issue 1, 2024, Pages 285-300]
Solgi, Ali
Geometrical Analysis of Fractures and Mineralized Veins of Gazkhizan Copper Deposit in Semnan Province, Iran [Volume 14, Issue 1, 2023, Pages 197-216]
Solimani, M.
Subsurface modeling of mud volcanoes, using density model and analysis of seismic velocity [Volume 6, Issue 1, 2015, Pages 31-39]
Solis-Rdoriguez, R.
Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]
Soltani, A.
Fuzzy tonnage-average grade model based on extension principle [Volume 10, Issue 3, 2019, Pages 659-666]
Soltani, F.
Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]
Soltanian, H.
Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]
Soltanian, H.
Wellbore Trajectory Optimization of an Iranian Oilfield Based on Mud Pressure and Failure Zone [Volume 11, Issue 1, 2020, Pages 193-220]
Soltanian, Hamid
Discrete elements analysis of sand production mechanism in oil well considering effects of in situ stress and fluid pressure [(Articles in Press)]
Soltanian-zadeh, H.
Limestone chemical components estimation using image processing and pattern recognition techniques [Volume 2, Issue 2, 2011, Pages 126-135]
Soltani Khaboushan, A.
Determination of an Optimum Interface between Open-Pit and Underground Mining Activities in Mazinu Coal Mine of Tabas Power Plant [Volume 12, Issue 1, 2021, Pages 139-149]
Soltani-Mohammadi, S.
Fuzzy tonnage-average grade model based on extension principle [Volume 10, Issue 3, 2019, Pages 659-666]
Soni, Anhay
Pit lakes as an end use of mining: A review [Volume 5, Issue 2, 2014, Pages 99-111]
Soofastaei, A.
Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]
Sotoudeh, F.
Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]
Sotoudeh, F.
Application of Sequential Gaussian Conditional Simulation to Underground Mine Design Under Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 695-709]
Srikant, Satya Sai
Preparation of High Purity Graphite using Comminution, Pressure Leaching and Flotation [Volume 14, Issue 4, 2023, Pages 1205-1218]
Srivastava, A.
A Comparative Study of Machine Learning Methods for Prediction of Blast-Induced Ground Vibration [Volume 12, Issue 3, 2021, Pages 667-677]
Sultan shah, Kausar
Evaluating Microscale Failure Response of Various Weathering Grade Sandstones Based on Micro-Scale Observation and Micro-Structural Modelling Subjected to Wet and Dry Cycles [Volume 13, Issue 2, 2022, Pages 341-355]
Surour, Adel Abd Allah
Integration of Landsat-8 and Reflectance Spectroscopy data for Mapping of Late Neoproterozoic Igneous Ring Complexes in an Arid Environment: a Case Study of Gebel El-Bakriyah Area, Eastern Desert, Egypt [Volume 14, Issue 1, 2023, Pages 13-31]
Surour, Adel A.
A Predictive GIS Model for Mapping Gold and Copper-bearing Alteration zones at South Gabal Um Monqul and Gabal Al Kharaza Prospects, North Eastern Desert, Egypt [Volume 14, Issue 4, 2023, Pages 1239-1260]
Surzhenko, A. Mykolaiovych
Substantiating Parameters of Reinforced Rock Supports [Volume 12, Issue 4, 2021, Pages 953-967]
Surzhenko, Andrii Mykolaiovych
Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]
Suthar, Manju
Study of Slope Stability using Flexible Facing [Volume 14, Issue 4, 2023, Pages 1155-1170]
T
Taajobian, Fatemeh
Analysis of Grain Size Effect on Mechanical Properties of Sandstone with Experimental and Numerical Methods [Volume 14, Issue 2, 2023, Pages 713-730]
Tabaroei, A.
Numerical Investigation of Effect of Rock Bolt Angle on Shear Behavior of Rock Bridges [Volume 11, Issue 4, 2020, Pages 1007-1022]
Tabasi, S.
Phytoextraction-based process of metal absorption from soil in mining areas (tailing dams) by Medicago sativa L. (Alfalfa) (Case study: Sarcheshmeh porphyry copper mine, SE of Iran) [Volume 8, Issue 3, 2017, Pages 419-431]
Tabasi, S.
Field study on Re and heavy metal phytoextraction and phytomining potentials by native plant species growing at Sarcheshmeh copper mine tailings, SE Iran [Volume 9, Issue 1, 2018, Pages 183-194]
Tabasi, S.
Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]
Taghizadeh, M.
Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]
Taghizadeh, Shadi
Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]
Taghvaeenejad, M.
Applying Analytical and Quantitative Criteria to Estimate Block Model Uncertainty and Mineral Reserve Classification: A Case Study: Khoshumi Uranium Deposit in Yazd [Volume 12, Issue 2, 2021, Pages 425-441]
Taheri Moghadder, M.
Investigation of Bishop’s and Janbu’s Models Capabilities on Slope Stability Problems with Special Consideration to Open-Pit Mining Operations [Volume 11, Issue 1, 2020, Pages 161-170]
Tahernejad, M. M
Selection of the best strategy for Iran's quarries: SWOT-FAHP method [Volume 3, Issue 1, 2012, Pages 1-13]
Tahernejad, M. M.
A practical approach to open-pit mine planning under price uncertainty using information gap decision theory [Volume 9, Issue 2, 2018, Pages 527-537]
Tahir, M.
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Tahmasebizadeh, P.
Solvent Extraction of Zinc from a Bioleaching Solution by Modification of D2EHPA: Optimization and Thermodynamic Studies [Volume 12, Issue 1, 2021, Pages 253-269]
Taiwo, Blessing Olamide
Improvement of Small-Scale Dolomite Blasting Productivity: Comparison of Existing Empirical Models with Image Analysis Software and Artificial Neural Network Models [Volume 13, Issue 3, 2022, Pages 627-641]
Taiwo, Blessing olamide
Mine Geo-environment Assessment: Carbonate Rock Mine Waste as Construction Material Addictive and Coupled with Pollution Index Model [Volume 14, Issue 1, 2023, Pages 179-196]
Taiwo, Blessing Olamide
Artificial Neural Network Modeling as an Approach to Limestone Blast Production Rate Prediction: a Comparison of PI-BANN and MVR Models [Volume 14, Issue 2, 2023, Pages 375-388]
Taiwo, Blessing Olamide
Improvement of Drill Bit-Button Performance and Efficiency during Drilling: an application of LSTM Model to Nigeria Southwest Mines [Volume 14, Issue 4, 2023, Pages 1121-1139]
Taiwo, Blessing Olamide
Granite Downstream Production Dependent Size and Profitability Assessment: an application of Mathematical-based Artificial Intelligence Model and WipFrag Software [Volume 15, Issue 2, 2024, Pages 497-515]
Taji, M.
Ranking and comparing of traditional and industrial coke making by TOPSIS technique in Shahrood Simin Coke Company [Volume 7, Issue 2, 2016, Pages 165-173]
Taji, M.
Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process [Volume 10, Issue 3, 2019, Pages 559-574]
Taji, M.
Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]
Tajik, Majid
Evaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2) [Volume 3, Issue 2, 2012, Pages 89-98]
Tajvidi Asr, E.
Semi-quantitative environmental impact assessment and sustainability level determination of coal mining using a mathematical model [Volume 7, Issue 2, 2016, Pages 185-193]
Takemura, J.
Influence of modeling material on undercut slope failure mechanism [Volume 8, Issue 4, 2017, Pages 645-662]
Talaei, M.
Highest-Level Implementation of Push–Relabel Algorithm to Solve Ultimate Pit Limit Problem [Volume 12, Issue 2, 2021, Pages 443-455]
Taleb Beydokhti, A. R.
A Correlation for Estimating LCPC Abrasivity Coefficient using Rock Properties [Volume 11, Issue 3, 2020, Pages 799-808]
Talebiesfandarani, Somayeh
Satellite Image Processing: Application for Alteration Separation based on U-Statistic Method in Zafarghand Porphyry System (Iran) [Volume 15, Issue 2, 2024, Pages 667-681]
Talesh Hosseini, S.
Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]
Talesh Hosseini, S.
An Optimum Selection of Simulated Geological Models by Multi-Point Geostatistics and Multi-Criteria Decision-Making Approaches; a Case Study in Sungun Porphyry-Cu deposit, Iran [Volume 11, Issue 2, 2020, Pages 481-503]
Talkhablou, M.
Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]
Tamartash, R.
Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]
Tangestani, Majid Hashemi
Mapping Lithological Units of an Evaporite Formation using ASTER data: a Case Study from Zagros Fold Belt, SW Iran [Volume 15, Issue 2, 2024, Pages 637-648]
Tanguturi, K.
Fundamental understanding of goaf gas displacement in longwall goaf [Volume 6, Issue 2, 2015, Pages 191-203]
Tanguturi, K.M.
Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution [Volume 9, Issue 3, 2018, Pages 547-557]
Tavakkoli-Moghaddam, R.
Robust production scheduling in open-pit mining under uncertainty: a box counterpart approach [Volume 8, Issue 2, 2017, Pages 255-267]
Tavakoli Mohammadi, Mohammad Reza
Predicting Arsenic Behavior in the Wastewater of Mouteh Gold Plant by Geochemical Modeling [Volume 4, Issue 1, 2013, Pages 57-65]
Tavakoli Mohammadi, M. R.
An applied comparison between conventional pre-dispersed solvent extraction (PDSE) contactors and new dissolved nitrogen PDSE (DNPDSE) ones [Volume 6, Issue 2, 2015, Pages 159-168]
Tavakoli Mohammadi, M. R.
Semi-quantitative environmental impact assessment and sustainability level determination of coal mining using a mathematical model [Volume 7, Issue 2, 2016, Pages 185-193]
Terzi, M.
Distribution of trace elements in coal and coal fly ash and their recovery with mineral processing practices: A review [Volume 9, Issue 3, 2018, Pages 641-655]
Teymouri, M.R.
Application of stochastic programming for iron ore quality control [Volume 9, Issue 2, 2018, Pages 331-338]
Theart, H.F.J
Investigation of blind massive sulphide deposit signatures in the calcrete layers as a geochemical barrier: A case study of Areachap, Kantienpan and Copperton deposits [Volume 2, Issue 2, 2011, Pages 86-101]
Theart, H.F.J.
Geochemical and mineralogical characteristic of the VHMS alteration pipe, major elements variations and peraluminous ratio, in high grade metamorphosed rocks [Volume 1, Number 2, 2010]
Tirandaz, Negar
Investigation of Fractures Effect on Building Stone Utilization: a Case Study [Volume 14, Issue 2, 2023, Pages 565-576]
Tiwari, Suresh Kumar
Soil Stabilization using Ceramic Waste: an Experimental Study [Volume 14, Issue 1, 2023, Pages 47-65]
Tohidi, H.
Design of An Intelligent Model for Strategic Planning in Mineral Holding: Case study, Shahab-Sang Holding [Volume 11, Issue 4, 2020, Pages 1115-1126]
Tokhmchi, B.
The impact of poor cementing casing damage: A numerical simulation study [Volume 6, Issue 1, 2015, Pages 41-53]
Tokhmechi, B.
Developing a method for identification of net zones using log data and diffusivity equation [Volume 2, Issue 1, 2011]
Tokhmechi, B.
Limestone chemical components estimation using image processing and pattern recognition techniques [Volume 2, Issue 2, 2011, Pages 126-135]
Tokhmechi, B.
Permeability upscaling in fractured reservoirs using different optimized mother wavelets at each level [Volume 7, Issue 2, 2016, Pages 239-250]
Tokhmechi, B.
Studying empirical correlation between drilling specific energy and geo-mechanical parameters in an oil field in SW Iran [Volume 8, Issue 3, 2017, Pages 393-401]
Tokhmechi, B.
Determination of constant coefficients of Bourgoyne and Young drilling rate model using a novel evolutionary algorithm [Volume 8, Issue 4, 2017, Pages 693-702]
Tokhmechi, B.
Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]
Tokhmechi, B.
Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]
Tokhmechi, B.
A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]
Tokhmechi, B.
A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]
Tokhmechi, B.
Bayesian Data Fusion: a Reliable Approach for Descriptive Modeling of Ore Deposits [Volume 11, Issue 1, 2020, Pages 63-76]
Tokhmechi, B.
Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]
Tokhmechi, B.
Fractal-wavelet-fusion-based re-ranking of joint roughness coefficients [Volume 10, Issue 4, 2019, Pages 1121-1133]
Tokhmechi, Behzad
Formation interface detection using Gamma Ray log: A novel approach [Volume 3, Issue 1, 2012, Pages 41-50]
Tokhmechi, Behzad
Application of Bayesian decision making tool in detecting oil-water contact in a carbonate reservoir [Volume 5, Issue 2, 2014, Pages 91-97]
Tolouei, K.
A Comprehensive Study of Several Meta-Heuristic Algorithms for Open-Pit Mine Production Scheduling Problem Considering Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 721-736]
Torab, F. Mohammad
Ore Deposit Boundary Modification in Afghanistan Aynak Central Copper Deposit using Sequential Indicator Simulation and Indicator Kriging [Volume 13, Issue 2, 2022, Pages 325-340]
Torabi, M.
Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]
Torabi, Seyed A.
An Optimum Selection of Simulated Geological Models by Multi-Point Geostatistics and Multi-Criteria Decision-Making Approaches; a Case Study in Sungun Porphyry-Cu deposit, Iran [Volume 11, Issue 2, 2020, Pages 481-503]
Torabi, Seyed Rahman
Evaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2) [Volume 3, Issue 2, 2012, Pages 89-98]
Torabi, S. R.
Application of Schmidt rebound number for estimating rock strength under specific geological conditions [Volume 1, Number 2, 2010]
Torabi, S.R.
The use of analytic hierarchy process in the selection of suitable excavation machine for Dez - Qomroud water conveyance tunnel (lot 1&2), Iran [Volume 2, Issue 1, 2011]
Torbati, S.
Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]
Torbati, S.
Metal(loid) uptake of Sonchus oleraceus grown around Cheshmeh-Konan copper deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 517-528]
Touil, Issam
Statistical Analysis and Optimization of Drilling Process using Response Surface Methodology and Experimental Data [Volume 15, Issue 1, 2024, Pages 55-71]
Trajanova, Adrijana
Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]
Tripathy, Debi Prasad
Application of machine learning techniques in slope stability analysis: A comprehensive overview [(Articles in Press)]
Tripura, Joseph
An Overview of Relationship between Hydro-Thermo-Mechanical Soil Parameters and Electrical Resistivity [Volume 14, Issue 1, 2023, Pages 97-112]
Tripura, Joseph
Hydrogeophysical Survey for Assessment of Groundwater Budget and Aquifer Protection in Hilly Terrain [Volume 14, Issue 4, 2023, Pages 1061-1079]
Tse, A. Celestine
Chemical Characteristics of Discharges from Two Derelict Coal Mine Sites in Enugu Nigeria: Implication for Pollution and Acid Mine Drainage [Volume 12, Issue 1, 2021, Pages 89-111]
Tüdeş, Şule
Soil liquefaction susceptibility of Akcay residential area (Biga Peninsula, Turkey) close to North Anatolian Fault Zone [Volume 14, Issue 4, 2023, Pages 1141-1153]
Turanboy, A.
A new approach for assessing stability of rock slopes considering centroids of weak zones [Volume 9, Issue 1, 2018, Pages 1-18]
Turanboy, A.
A New Stability Approach using Probabilistic Profile along Direction of Excavation [Volume 11, Issue 1, 2020, Pages 1-20]
Tykhenko, Oksana Mykolaivna
Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]
Tyopine, Andrew Aondover
Ecological Risk Analysis of Stream Sediments Data and Impact on Aquatic Biota around Mining and Agricultural Regions [Volume 15, Issue 2, 2024, Pages 517-536]
U
Ullah, A.
Proposing a Viable Stabilization Method for Slope in a Weak Rock Mass Environment using Numerical Modelling: a Case Study from Cut Slopes [Volume 12, Issue 4, 2021, Pages 929-940]
Ullah, B.
Comparative Analysis of Coal Miner’s Fatalities by Fuzzy Logic [Volume 12, Issue 1, 2021, Pages 77-87]
Ullah, Rafi
Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]
Unesi, M.
Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]
Unesi, Majid
Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill [Volume 5, Issue 2, 2014, Pages 121-128]
Unver, B.
Fundamentals of 3D modelling and resource estimation in coal mining [Volume 9, Issue 3, 2018, Pages 623-639]
Ur Rehman, S.
Modeling and Optimization of Truck-Shovel Allocation to Mining Faces in Cement Quarry [Volume 11, Issue 1, 2020, Pages 21-30]
V
Vaezian, A.
Magnetic Nano mineral and acid mine drainage interaction: An experimental study [Volume 8, Issue 3, 2017, Pages 447-453]
Vafaie, Hassan
Modeling, Optimizing, and Characterizing Elimination Process of Cyanide Ion from an Industrial Wastewater of Gold Mine by Caro’s Acid Method [Volume 13, Issue 3, 2022, Pages 839-849]
Vahedi, R.
Permeability upscaling in fractured reservoirs using different optimized mother wavelets at each level [Volume 7, Issue 2, 2016, Pages 239-250]
Validabadi Bozcheloei, Khadijeh
Mapping Lithological Units of an Evaporite Formation using ASTER data: a Case Study from Zagros Fold Belt, SW Iran [Volume 15, Issue 2, 2024, Pages 637-648]
Varmaziyari, Z.
A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]
Vega Gonzalez, Juan Antonio
Copper ore grade prediction using Machine Learning techniques in a copper deposit [(Articles in Press)]
Velázquez del Rosario, A.
Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]
Verma, Ankit
Sustainable Approach for Geometric Design of Highway using OpenRoads: a Case Study of NH-05 [Volume 14, Issue 3, 2023, Pages 825-837]
Verzea, I.
A Safe and Sustainable Development in a Hygiene and Healthy Company Using Decision Matrix Risk Assessment Technique: a case study [Volume 11, Issue 2, 2020, Pages 363-373]
Vishwakarma, Smily
Seasonal Variation in Physico-chemical Characteristics of Domestic Wastewater in Himachal Pradesh: a Case Study [Volume 14, Issue 3, 2023, Pages 771-787]
Vivanco, Angelica
ASSESSING THE OPERATIONAL DAMAGE IMPACT ON MINING TIRES (CASE STUDY) [(Articles in Press)]
Voigt, H-J.
Impact of mining on groundwater quality in SW Ashanti, Ghana: a preliminary study [Volume 7, Issue 1, 2016, Pages 81-95]
W
Wagay, Tanveer
Study of Slope Stability using Flexible Facing [Volume 14, Issue 4, 2023, Pages 1155-1170]
Wageh Hussein, A.
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Walia, Alankrit
Assessment of Slope Stability and Its Remedies in Palampur, Himachal Pradesh [Volume 13, Issue 3, 2022, Pages 767-780]
Warwade, P.
Impact Assessment of Mining Activities on Surface and Sub-Surface Water Condition of Ramgarh, Jharkhand, India using Geospatial Techniques [Volume 12, Issue 3, 2021, Pages 651-665]
X
Xu, Leige
Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]
Y
Yadav, Jitendra Singh
Bearing Capacity of Circular Footing Resting on Recycled Construction Waste Materials using ANN Method [Volume 15, Issue 1, 2024, Pages 97-114]
Yadav, Jitendra Singh
Evaluation of Pressure-Settlement Response of Square Footing Rested on Sand Reinforced with Coir Geotextile [Volume 15, Issue 2, 2024, Pages 481-495]
Yaghobi, M.
Application of perfect mixing model for simulation of vertical roller mills [Volume 8, Issue 4, 2017, Pages 545-553]
Yahyaei, M.
Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]
Yamamoto, J.K.
On the reduction of the ordinary kriging smoothing effect [Volume 2, Issue 2, 2011, Pages 102-117]
Yamini, Yadollah
Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]
Yang, G.
Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]
Yarahamdi Bafghi, Alireza
Simulation of Crack Propagation Mechanism in Porous Media using Modified linear Element Displacement Discontinuity Method [Volume 13, Issue 3, 2022, Pages 903-927]
Yarahamdi Bafghi, Alireza
Analytical Solutions of First-order Displacement Discontinuity Elements in Poroelasticity [Volume 14, Issue 2, 2023, Pages 601-618]
Yarahamdi Bafghi, Alireza
Coupling discontinuous deformation analysis and displacement discontinuity method for simulating failure mechanism in geomaterials [(Articles in Press)]
Yarahamdi Bafghi, Alireza
A New method for stability analysis of chain pillar in longwall mining by using Coulmann graphical method [(Articles in Press)]
Yarahamdi Bafghi, A.R.
Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]
Yarahmadi Bafghi, A.
Probabilistic analysis of stability of chain pillars in Tabas coal mine in Iran using Monte Carlo simulation [Volume 7, Issue 1, 2016, Pages 25-35]
Yarahmadi Bafghi, A. R.
Numerical investigation of effect of crack geometrical parameters on hydraulic fracturing process of hydrocarbon reservoirs [Volume 7, Issue 2, 2016, Pages 205-214]
Yarahmadi Bafghi, A.R.
Rock mass structural data analysis using image processing techniques (Case study: Choghart iron ore mine northern slopes) [Volume 8, Issue 1, 2017, Pages 61-74]
Yarahmadi Bafghi, A.R.
Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]
Yarmahmoudi, A.
Mechanical Properties of Low Plasticity Clay Soil Stabilized with Iron Ore Mine Tailing and Portland Cement [Volume 11, Issue 3, 2020, Pages 837-853]
Yasrebi, A. B.
Delineation of Gas Content Zones Using N-S Fractal Model in Coking Coal Deposits [Volume 12, Issue 1, 2021, Pages 181-189]
Yavari, M. Davood
Compressive Failure Analyses of Rock-Like Materials by Experimental and Numerical Methods [Volume 12, Issue 3, 2021, Pages 769-783]
Yavari, M. Davood
On Propagation Mechanism of Cracks Emanating from Two Neighboring Holes in Cubic Concrete Specimens under Various Lateral Confinements [Volume 12, Issue 4, 2021, Pages 1003-1017]
Yavarzadeh, M.
Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review [Volume 11, Issue 2, 2020, Pages 517-537]
Yazdani, M.
Determination of Hydraulic Jacking Mechanism and Maximum Allowable Grout Pressure during Grout Injection in Anisotropic Rocks [Volume 12, Issue 2, 2021, Pages 589-603]
Yazdi, Abdollah
Protection of Geological Heritage by a New Phenomenon in Earth Sciences: Geoconservation [Volume 15, Issue 1, 2024, Pages 365-379]
Yazdi, M.
Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]
Yeboah, Andy Kwame
Numerical Study of Behavior of Eccentric-inclined Loaded Strip Footing Resting above a Soil Mass Containing a Void [Volume 14, Issue 3, 2023, Pages 909-927]
Yehia, Mohamed Mokhtar
Change Detection of Surface Water of Atfih Spring by Integrated Effect of Rainfall Storms and Geological Structures using Landsat Data [Volume 14, Issue 1, 2023, Pages 79-96]
Yenial, U.
Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash [Volume 9, Issue 2, 2018, Pages 319-330]
Yilmaz, A. Osman
Experimental Investigation of Usability of Construction Waste as Aggregate [Volume 12, Issue 1, 2021, Pages 63-76]
Yilmaz, Ali Osman
Evaluation of Pozzolanic Activity of Two Different Types of C and F Fly Ashes with Fineness Factor [Volume 14, Issue 2, 2023, Pages 435-448]
Yousefi, M.
Mineral Potential Modeling of Porphyry Copper Deposits using Continuously-Weighted Spatial Evidence Layers and Union Score Integration Method [Volume 12, Issue 3, 2021, Pages 743-751]
Yousefi, Mahyar
Should Geochemical Indicators Be Integrated to Produce Enhanced Signatures of Mineral Deposits? A Discussion with Regard to Exploration Scale [Volume 14, Issue 3, 2023, Pages 1011-1018]
Yousefi, Mahyar
Delineation of Gold Exploration Targets based on Prospectivity Models through an Optimization Algorithm [Volume 15, Issue 2, 2024, Pages 597-611]
Yousefi, Mahyar
Combination of geochemical and structural data to determine the exploration target of copper hydrothermal deposits in the Feizabad district [(Articles in Press)]
Yousefi, S.
Optimal production strategy of bimetallic deposits under technical and economic uncertainties using stochastic chance-constrained programming [Volume 8, Issue 3, 2017, Pages 475-485]
Yousefi, S.
A Hybrid Fuzzy MCDM Approach to Determine an Optimal Block Size in Open-Pit Mine Modeling: a Case Study [Volume 11, Issue 2, 2020, Pages 611-627]
Yousefi, Saeed
Should Geochemical Indicators Be Integrated to Produce Enhanced Signatures of Mineral Deposits? A Discussion with Regard to Exploration Scale [Volume 14, Issue 3, 2023, Pages 1011-1018]
Yousefi, Saeed
Combination of geochemical and structural data to determine the exploration target of copper hydrothermal deposits in the Feizabad district [(Articles in Press)]
Yousefian, H.
Wellbore Trajectory Optimization of an Iranian Oilfield Based on Mud Pressure and Failure Zone [Volume 11, Issue 1, 2020, Pages 193-220]
Yusefi, A.
A programming method to estimate proximate parameters of coal beds from well-logging data using a sequential solving of linear equation systems [Volume 10, Issue 3, 2019, Pages 633-647]
Yusefi, M.
Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]
Z
Zadhesh, J.
Determining Probability Distribution Functions of Rock Joint Geometric Properties [Volume 13, Issue 1, 2022, Pages 281-308]
Zahab-Nazouri, Arefeh
A model for predicting dynamic frothability index of dual-frother blends [Volume 6, Issue 1, 2015, Pages 119-124]
Zahedi, A.
Developing a method for identification of net zones using log data and diffusivity equation [Volume 2, Issue 1, 2011]
Zahiri, M.
A Numerical Investigation of TBM Disc Cutter Life Prediction in Hard Rocks [Volume 11, Issue 4, 2020, Pages 1095-1113]
Zamora Echenique, G
Environmental Hazards Associated With Mining Activities in the Vicinity of Bolivian Poopó Lake [Volume 3, Issue 1, 2012, Pages 15-26]
Zandy Ilghani, N.
Application of alteration index and zoning for Pb-Znexploration in Haft-Savaran area, Khomein, Iran [Volume 9, Issue 1, 2018, Pages 229-242]
Zandy Ilghani, N.
Bayesian prediction of rotational torque to operate horizontal drilling [Volume 10, Issue 2, 2019, Pages 507-515]
Zandy Ilghani, N.
Investigating Correlation of Physico-Mechanical Parameters and P-Wave Velocity of Rocks: a Comparative Intelligent Study [Volume 12, Issue 3, 2021, Pages 863-875]
Zare, S.
Low-Cost Approaches to Promote Performance of Comminution Circuit at Steel-Sirjan Iron Ore Complex [Volume 12, Issue 4, 2021, Pages 1065-1076]
Zare, Sh.
Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel) [Volume 8, Issue 1, 2017, Pages 111-130]
Zare, Sh.
A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]
Zare, Sh.
Numerical Modelling of Backfill Grouting Approaches in EPB Tunneling [Volume 11, Issue 1, 2020, Pages 301-314]
Zare, Sh.
A 3D Finite-Difference Analysis of Interaction between a Newly-Driven Large Tunnel with Twin Tunnels in Urban Areas [Volume 11, Issue 3, 2020, Pages 809-823]
Zare, Sh.
Challenges for In-Situ Stress Measurement in Rock Caverns by Hydraulic Fracturing and HTPF Tests-Case Study: Azad Hydropower Project [Volume 12, Issue 2, 2021, Pages 529-545]
Zare, Sh.
Stochastic Stability Analysis of Tunnels Considering Randomness of Rock Mass Properties [Volume 12, Issue 4, 2021, Pages 1123-1141]
Zare, Shokroallah
Performance Comparison of Particle Swarm Optimization and Genetic Algorithm for Back-analysis of Soil Layer Geotechnical Parameters [Volume 14, Issue 1, 2023, Pages 217-232]
Zare, Shokrollah
Real-Scale Numerical Analyzing Dynamic Process of TBM Boring in Jointed Rock; a Case Study: Kerman Water Conveyance Tunnel in Iran [Volume 13, Issue 3, 2022, Pages 643-666]
Zarean, A.
Joint inversion of ReMi dispersion curves and refraction travel times using particle swarm optimization algorithm [Volume 7, Issue 1, 2016, Pages 67-79]
Zare Naghadehi, M.
Probabilistic Prediction of Acid Mine Drainage Generation Risk Based on Pyrite Oxidation Process in Coal Washery Rejects - A Case Study [Volume 12, Issue 1, 2021, Pages 127-137]
Zare Naghadehi, Masoud
Evaluation of the Slope Stability under Geological Conditions Using Multi-Factorial Fuzzy Classification System [(Articles in Press)]
Zarrin ghalam, Erfan
PFC Simulation of Brazilian Tensile Strength Test in Geomaterials’ Specimens with T-shaped Non-persistent Joints [Volume 13, Issue 4, 2022, Pages 1189-1209]
Zebarjadi Dana, H.
Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]
Zendahdel, A.
GIS modelling for Au-Pb-Zn potential mapping in Torud-Chah Shirin area-Iran [Volume 1, Number 1, 2010]
Zendelska, Afrodita
Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]
ZHAO, H.C.
Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]
Zhou, W.
Wedge Failure Analysis of the Slope Subjected to Uplift Forces by Analytical Method at Chingola Open Pits F & D [Volume 12, Issue 4, 2021, Pages 941-952]
Ziaei, J.
A Modified Schimazek’s F-abrasiveness Factor for Evaluating Abrasiveness of Andesite Rocks in Rock Sawing Process [Volume 11, Issue 2, 2020, Pages 563-575]
Ziaei, M.
GIS modelling for Au-Pb-Zn potential mapping in Torud-Chah Shirin area-Iran [Volume 1, Number 1, 2010]
Ziaii, M.
GIS modelling for Au-Pb-Zn potential mapping in Torud-Chah Shirin area-Iran [Volume 1, Number 1, 2010]
Ziaii, M.
Sub-pixel classification of hydrothermal alteration zones using a kernel-based method and hyperspectral data; A case study of Sarcheshmeh Porphyry Copper Mine and surrounding area, Kerman, Iran [Volume 8, Issue 4, 2017, Pages 555-565]
Ziaii, M.
Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]
Ziaii, M.
Porosity classification from thin sections using image analysis and neural networks including shallow and deep learning in Jahrum formation [Volume 9, Issue 2, 2018, Pages 513-525]
Ziaii, M.
Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]
Zolfaghari, A.
First Finding of Satin Spar Gemstone in Iran, Folded Zagros Zone, Fars Region [Volume 11, Issue 4, 2020, Pages 1039-1046]
Zolotarova, Oksana Viktorivna
Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]
Zoorabadi, M.
Numerical modelling of the underground roadways in coal mines– uncertainties caused by use of empirical-based downgrading methods and in situ stresses [Volume 9, Issue 3, 2018, Pages 593-604]
