A

  • Abdollahi, H. A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]

  • Abdollahipour, A. Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]

  • Abdollahy, M. Interactional effects of bubble size, particle size, and collector dosage on bubble loading in column flotation [Volume 9, Issue 1, 2018, Pages 107-116]

  • Abdollahy, M. An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]

  • Abdollahy, M. Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]

  • Abdollahy, M. Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]

  • Abedini, M. Porosity classification from thin sections using image analysis and neural networks including shallow and deep learning in Jahrum formation [Volume 9, Issue 2, 2018, Pages 513-525]

  • Abubeker, Y. Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]

  • Adenikinju, A. Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Afzal, P. Application of spectrum-volume fractal modeling for detection of mineralized zones [Volume 9, Issue 2, 2018, Pages 371-378]

  • Afzal, P. Comparing ordinary kriging and advanced inverse distance squared methods based on estimating coal deposits; case study: East-Parvadeh deposit, central Iran [Volume 9, Issue 3, 2018, Pages 753-760]

  • Aghababaie, H. Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]

  • Ahmadi, R. Effect of thermal treatment on specific rate of breakage of manganese ore [Volume 9, Issue 2, 2018, Pages 339-348]

  • Ahmadi, R. Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]

  • Ahmadi, R. Exploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study [Volume 9, Issue 4, 2018, Pages 1009-1018]

  • Akintunde, E. A. Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Akrami, A. Numerical modeling of hydraulic fracturing in carbonate rocks of Bangestan reservoir [Volume 9, Issue 1, 2018, Pages 117-126]

  • Alamdari, E. K. Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]

  • Alaminia, Z. Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]

  • Ali Madadi, S. Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]

  • Alipour, S. Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]

  • Alonso-Gonzalez, O. Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]

  • Alorro, R. D. Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]

  • Amiri Shiraz, E. Evaluating performance of natural sepiolite and zeolite nanoparticles for nickel, antimony, and arsenic removal from synthetic wastewater [Volume 9, Issue 4, 2018, Pages 1049-1064]

  • An, H.J. Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]

  • Anselme Kamga, M. Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Arceo-Olague, J. G Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]

  • Aryanmehr, H. Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]

  • Asghari, O. Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]

  • Asghari, O. Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]

  • Ataei, M. A quantitative model for evaluation and classification of blastings in open-pit mines [Volume 9, Issue 1, 2018, Pages 127-141]

  • Ataei, M. Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]

  • Ataei, M. A practical approach to open-pit mine planning under price uncertainty using information gap decision theory [Volume 9, Issue 2, 2018, Pages 527-537]

  • Ataei, M. Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]

  • Ataei, M. A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]

  • Ataei, M. Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]

  • Azadmehr, A. R. Field study on Re and heavy metal phytoextraction and phytomining potentials by native plant species growing at Sarcheshmeh copper mine tailings, SE Iran [Volume 9, Issue 1, 2018, Pages 183-194]

  • Azarfar, A. Improvement of coal mine roof rating classification using fuzzy type-2 [Volume 9, Issue 3, 2018, Pages 691-701]

  • Azimi, A. Application of stochastic programming for iron ore quality control [Volume 9, Issue 2, 2018, Pages 331-338]

  • Aziz, N. Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]

  • Azizi, A. Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]

  • Azizi, A. Solvent extraction of copper from an industrial sulfate liquor using Chemorex CP-150 [Volume 9, Issue 4, 2018, Pages 905-916]

  • Azizi, H. A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]

B

  • Babanouri, N. A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]

  • Bahrami, A. Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]

  • Bahroudi, A. Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]

  • Balaraju, J. Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]

  • Balusu, R.S. Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution [Volume 9, Issue 3, 2018, Pages 547-557]

  • Barak, S. Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]

  • Bello-Teodoro, S. Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]

  • Berhe, G.G. Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]

  • Bogale, T. Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]

  • Borg, G. Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]

  • Bulut, G. Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash [Volume 9, Issue 2, 2018, Pages 319-330]

D

  • Dabiri, R. Evaluating performance of natural sepiolite and zeolite nanoparticles for nickel, antimony, and arsenic removal from synthetic wastewater [Volume 9, Issue 4, 2018, Pages 1049-1064]

  • Dadashi, E. An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]

  • Dahrazma, B. Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]

  • Darbani, H. A three dimensional geometrical model for calculation of induced stresses surrounding longwall working [Volume 9, Issue 3, 2018, Pages 727-740]

  • Dehghani, H. Forecasting copper price using gene expression programming [Volume 9, Issue 2, 2018, Pages 349-360]

E

  • Emtiazi, G. XRF analysis of coal bioleaching by chemolithoheterotrophic Alicyclobacillus HRM5 and chemolithoautotrophic Acidithiobacillus ferrooxidans [Volume 9, Issue 3, 2018, Pages 559-566]

  • Eskanlou, A. Interactional effects of bubble size, particle size, and collector dosage on bubble loading in column flotation [Volume 9, Issue 1, 2018, Pages 107-116]

  • Eslami Andargoli, M. B. Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]

  • Etemadifar, Z. XRF analysis of coal bioleaching by chemolithoheterotrophic Alicyclobacillus HRM5 and chemolithoautotrophic Acidithiobacillus ferrooxidans [Volume 9, Issue 3, 2018, Pages 559-566]

  • Etemadzadeh, Sh. Sadat XRF analysis of coal bioleaching by chemolithoheterotrophic Alicyclobacillus HRM5 and chemolithoautotrophic Acidithiobacillus ferrooxidans [Volume 9, Issue 3, 2018, Pages 559-566]

F

  • Farahbakhsh, E. A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]

  • Farahbakhsh, E. A comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran [Volume 9, Issue 4, 2018, Pages 917-940]

  • Farrokh, E. Introducing hard rock TBMs’ downtime analysis model with reference to past case histories’ data [Volume 9, Issue 2, 2018, Pages 457-472]

  • Fatehi Marji, M. Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]

  • Fathi, M. B. Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]

  • Fattahi, H. A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]

  • Feizollahi, S. Solvent extraction of copper from an industrial sulfate liquor using Chemorex CP-150 [Volume 9, Issue 4, 2018, Pages 905-916]

  • Fuanya, C. Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

G

  • Galvan-Tejada, J. I Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]

  • Gao, M.S. Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]

  • Ghadimi, F. Application of alteration index and zoning for Pb-Znexploration in Haft-Savaran area, Khomein, Iran [Volume 9, Issue 1, 2018, Pages 229-242]

  • Ghanbari, K. Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]

  • Ghanbari, M. Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]

  • Gharabaghi, M. Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]

  • Ghasemi, R. Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]

  • Ghavami Riabi, Seyed R. Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]

  • Ghavami Riabi, Seyed R. Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]

  • Ghiasi-Freez, J. Porosity classification from thin sections using image analysis and neural networks including shallow and deep learning in Jahrum formation [Volume 9, Issue 2, 2018, Pages 513-525]

  • Ghiasi-Freez, J. Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]

  • Ghodrati, B. Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]

  • Gholamnejad, J. Application of stochastic programming for iron ore quality control [Volume 9, Issue 2, 2018, Pages 331-338]

  • Ghomi, M. Application of alteration index and zoning for Pb-Znexploration in Haft-Savaran area, Khomein, Iran [Volume 9, Issue 1, 2018, Pages 229-242]

  • Ghoorchi, M. Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]

  • Girma, W. Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]

  • Goshtasbi, K. Prediction of ultimate strength of shale using artificial neural network [Volume 9, Issue 1, 2018, Pages 91-105]

  • Goshtasbi, K. Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]

  • Goshtasbi, K. An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]

  • Govinda Raj, M. Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]

H

  • Hajializadeh, S. Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]

  • Hajizadeh, F. Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]

  • Hamzaban, M. T. Determination of scratching energy index for Cerchar abrasion test [Volume 9, Issue 1, 2018, Pages 73-89]

  • Hasanpour, R. Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]

  • Hassani, H. Field study on Re and heavy metal phytoextraction and phytomining potentials by native plant species growing at Sarcheshmeh copper mine tailings, SE Iran [Volume 9, Issue 1, 2018, Pages 183-194]

  • Hemmati Chegeni, M. Interactional effects of bubble size, particle size, and collector dosage on bubble loading in column flotation [Volume 9, Issue 1, 2018, Pages 107-116]

  • Heshami, M. Effect of thermal treatment on specific rate of breakage of manganese ore [Volume 9, Issue 2, 2018, Pages 339-348]

  • Heydartaemeh, M. R. An innovative application of (NiXZnX–X Fe2O4) Mineral nanoparticles for adsorption of Malachite green dye from wastewater effluents [Volume 9, Issue 1, 2018, Pages 143-152]

  • Hezarkhani, A. A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]

  • Hezarkhani, A. A comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran [Volume 9, Issue 4, 2018, Pages 917-940]

  • Honarmand, M. Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]

  • Honarmand, M. Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]

  • Hoseini, Seyyed M. A quantitative model for evaluation and classification of blastings in open-pit mines [Volume 9, Issue 1, 2018, Pages 127-141]

  • Hoseinie, Seyed H. Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]

  • Hosseini, A. Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]

  • Hosseini, M. Numerical modeling of hydraulic fracturing in carbonate rocks of Bangestan reservoir [Volume 9, Issue 1, 2018, Pages 117-126]

  • Hosseini, M. Effects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone) [Volume 9, Issue 2, 2018, Pages 379-391]

  • Hosseinjanizadeh, M. Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]

J

  • Jahangiri, M. Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]

  • Jamali, H. Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]

  • Jamshidi, M. UPL determination of multi-element deposits with grade uncertainty using a new block economic value calculation approach [Volume 9, Issue 1, 2018, Pages 61-72]

  • Jozanikohan, G. Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]

K

  • Karamoozian, M. Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]

  • Kargar, A.R. Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]

  • Kazemzadeh, E. A. Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]

  • Kemeng, M. P. Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Khademi Hamidi, J. Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]

  • Khaleghparast, S. Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]

  • Khalesi, M. R. Interactional effects of bubble size, particle size, and collector dosage on bubble loading in column flotation [Volume 9, Issue 1, 2018, Pages 107-116]

  • Khalesi, M. R. An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]

  • Khalesi, M. R. Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]

  • Khalili, H. Application of spectrum-volume fractal modeling for detection of mineralized zones [Volume 9, Issue 2, 2018, Pages 371-378]

  • Khalokakaie, R. Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]

  • Khalokakaie, R. A practical approach to open-pit mine planning under price uncertainty using information gap decision theory [Volume 9, Issue 2, 2018, Pages 527-537]

  • Khaloo Kakaie, R. A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]

  • Khaloo Kakaie, R. Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]

  • Khaloo Kakaie, R. Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]

  • Khodadadi Darban, A. Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]

  • Khodadadi Darban, A. Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]

  • Khodayari, A. R. Effects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone) [Volume 9, Issue 2, 2018, Pages 379-391]

  • Khosravi, M. H. Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]

  • Kursun Unver, I. Distribution of trace elements in coal and coal fly ash and their recovery with mineral processing practices: A review [Volume 9, Issue 3, 2018, Pages 641-655]

  • Küçüksütçü, C. B. A new approach for assessing stability of rock slopes considering centroids of weak zones [Volume 9, Issue 1, 2018, Pages 1-18]

L

  • Luna-Garcia, H. Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]

M

  • Mackizadeh, M. A. Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]

  • Majdi, A. Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]

  • Maleki, S. Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]

  • Memarian, H. Determination of scratching energy index for Cerchar abrasion test [Volume 9, Issue 1, 2018, Pages 73-89]

  • Mert, B. A. A GIS-aided resource estimation of coalfields in Kangal basin, Sivas province, Turkey [Volume 9, Issue 3, 2018, Pages 581-591]

  • Meysami, F. Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]

  • Mikaeil, R. Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]

  • Mirzaghorbanali, A. Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]

  • Mirzaghorbanali, A. Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]

  • Mirzapour, Y. Exploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study [Volume 9, Issue 4, 2018, Pages 1009-1018]

  • Mohammadi, H. A three dimensional geometrical model for calculation of induced stresses surrounding longwall working [Volume 9, Issue 3, 2018, Pages 727-740]

  • Mohammadi, S. Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]

  • Mohammadi, S. Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]

  • Mohammadiun, M Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]

  • Mohseni, M. An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]

  • Mohseni, M. A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]

  • Mohtasham Seyfi, M. Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]

  • Monjezi, M. Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]

  • Moosazadeh, S. Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]

  • Moradzadeh, A. Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]

  • Moreno-Baez, A. Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]

  • Moshrefi, S. Prediction of ultimate strength of shale using artificial neural network [Volume 9, Issue 1, 2018, Pages 91-105]

  • Mostafaei, K. 3D model construction of induced polarization and resistivity data with quantifying uncertainties using geostatistical methods and drilling (Case study: Madan Bozorg, Iran) [Volume 9, Issue 4, 2018, Pages 857-872]

  • Mulugeta Sisay, C. Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]

  • Murthy, C.H.S.N. Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]

N

  • Naderi, H. Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]

  • Najafi, M. Stability analysis of support systems using a coupled FEM-DFN model (Case study: a diversion tunnel at Lorestan dam site, Iran) [Volume 9, Issue 2, 2018, Pages 485-497]

  • Naser, F. Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]

  • Naseri, F. Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]

  • Nazari, S. Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]

  • Nazeri, M. Random forests algorithm in podiform chromite prospectivity mapping in Dolatabad area, SE Iran [Volume 9, Issue 2, 2018, Pages 403-416]

  • Ndip, E. A. Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Negahdarzadeh, Y. Porosity classification from thin sections using image analysis and neural networks including shallow and deep learning in Jahrum formation [Volume 9, Issue 2, 2018, Pages 513-525]

  • Nguimatsia, F. W.D. Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Noaparast, M. A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]

  • Noorzad, A. An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]

  • Noroozi, M. Stability analysis of support systems using a coupled FEM-DFN model (Case study: a diversion tunnel at Lorestan dam site, Iran) [Volume 9, Issue 2, 2018, Pages 485-497]

  • Norouzi Masir, R. Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]

  • Nzali, S. Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

O

  • Olatubara, C. O. Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Osanloo, M. UPL determination of multi-element deposits with grade uncertainty using a new block economic value calculation approach [Volume 9, Issue 1, 2018, Pages 61-72]

  • Owolabi, A.O. Assessment of radioactive contamination in water bodies around mine workings using radiation counter [Volume 9, Issue 4, 2018, Pages 795-806]

  • Ozcelik, Y. Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]

  • Ozkan, S. G. A review of simultaneous ultrasound-assisted coal flotation [Volume 9, Issue 3, 2018, Pages 679-689]

P

  • Poursalehi, R. An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]

R

  • Rabiei, M. A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]

  • Rafiee, R. Stability analysis of support systems using a coupled FEM-DFN model (Case study: a diversion tunnel at Lorestan dam site, Iran) [Volume 9, Issue 2, 2018, Pages 485-497]

  • Rafiee, R. Improvement of coal mine roof rating classification using fuzzy type-2 [Volume 9, Issue 3, 2018, Pages 691-701]

  • Rafiee, R. Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]

  • Rahimi, H. Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]

  • Ramazi, H. R. 3D model construction of induced polarization and resistivity data with quantifying uncertainties using geostatistical methods and drilling (Case study: Madan Bozorg, Iran) [Volume 9, Issue 4, 2018, Pages 857-872]

  • Ramezanzadeh, A. Prediction of ultimate strength of shale using artificial neural network [Volume 9, Issue 1, 2018, Pages 91-105]

  • Ramezanzadeh, A. Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]

  • Ranjbar, H. Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]

  • Rasouli, V. A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]

  • Ravanasa, E. Exploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study [Volume 9, Issue 4, 2018, Pages 1009-1018]

  • Razmjooei, S. Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]

  • Resekh, H. Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]

  • Rezaei, M. Long-term stability analysis of goaf area in longwall mining using minimum potential energy theory [Volume 9, Issue 1, 2018, Pages 169-182]

  • Rezai, B. Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]

  • Rostami, J. Determination of scratching energy index for Cerchar abrasion test [Volume 9, Issue 1, 2018, Pages 73-89]

  • Rostami, M. Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]

S

  • Sadeghi, M. Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]

  • Sadr, M. P. Random forests algorithm in podiform chromite prospectivity mapping in Dolatabad area, SE Iran [Volume 9, Issue 2, 2018, Pages 403-416]

  • Safari Sinegani, S. Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]

  • Saffari, A. Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]

  • Saghravani, Seyed F. Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]

  • Salehfard, M. A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]

  • Sereshki, F. A quantitative model for evaluation and classification of blastings in open-pit mines [Volume 9, Issue 1, 2018, Pages 127-141]

  • Sereshki, F. Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]

  • Sereshki, F. Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]

  • Shafaei, Seyed Z. A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]

  • Shafaei, Seyed Ziaedin Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]

  • Shahbazi, B. Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]

  • Shahraki, S. Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]

  • Shahriar, K. Prediction of ultimate strength of shale using artificial neural network [Volume 9, Issue 1, 2018, Pages 91-105]

  • Shahriar, K. Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]

  • Shahriar, K. An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]

  • Shahriari, H. Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]

  • Shahverdi, M.R. Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]

  • Shokouh Saljoughi, B. A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]

  • Shokouh Saljoughi, B. A comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran [Volume 9, Issue 4, 2018, Pages 917-940]

  • Sodeifi, H. Numerical modeling of hydraulic fracturing in carbonate rocks of Bangestan reservoir [Volume 9, Issue 1, 2018, Pages 117-126]

  • Sohrabian, B. Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]

  • Solis-Rdoriguez, R. Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]

  • Soltanian, H. Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]

  • Sotoudeh, F. Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]

T

  • Tabasi, S. Field study on Re and heavy metal phytoextraction and phytomining potentials by native plant species growing at Sarcheshmeh copper mine tailings, SE Iran [Volume 9, Issue 1, 2018, Pages 183-194]

  • Tahernejad, M. M. A practical approach to open-pit mine planning under price uncertainty using information gap decision theory [Volume 9, Issue 2, 2018, Pages 527-537]

  • Talesh Hosseini, S. Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]

  • Tanguturi, K.M. Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution [Volume 9, Issue 3, 2018, Pages 547-557]

  • Terzi, M. Distribution of trace elements in coal and coal fly ash and their recovery with mineral processing practices: A review [Volume 9, Issue 3, 2018, Pages 641-655]

  • Teymouri, M.R. Application of stochastic programming for iron ore quality control [Volume 9, Issue 2, 2018, Pages 331-338]

  • Tokhmechi, B. Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]

  • Tokhmechi, B. Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]

  • Tokhmechi, B. A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]

  • Torabi, M. Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]

  • Torbati, S. Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]

  • Turanboy, A. A new approach for assessing stability of rock slopes considering centroids of weak zones [Volume 9, Issue 1, 2018, Pages 1-18]

U

  • Unver, B. Fundamentals of 3D modelling and resource estimation in coal mining [Volume 9, Issue 3, 2018, Pages 623-639]

V

  • Varmaziyari, Z. A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]

  • Velázquez del Rosario, A. Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]

Y

  • Yamini, Yadollah Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]

  • Yang, G. Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]

  • Yarahmadi Bafghi, A.R. Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]

  • Yazdi, M. Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]

  • Yenial, U. Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash [Volume 9, Issue 2, 2018, Pages 319-330]

Z

  • Zandy Ilghani, N. Application of alteration index and zoning for Pb-Znexploration in Haft-Savaran area, Khomein, Iran [Volume 9, Issue 1, 2018, Pages 229-242]

  • Zebarjadi Dana, H. Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]

  • ZHAO, H.C. Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]

  • Ziaii, M. Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]

  • Ziaii, M. Porosity classification from thin sections using image analysis and neural networks including shallow and deep learning in Jahrum formation [Volume 9, Issue 2, 2018, Pages 513-525]

  • Ziaii, M. Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]

  • Zoorabadi, M. Numerical modelling of the underground roadways in coal mines– uncertainties caused by use of empirical-based downgrading methods and in situ stresses [Volume 9, Issue 3, 2018, Pages 593-604]