Document Type : Original Research Paper
Authors
1 1PhD student of Mining Engineering, School of Engineering, Mining Engineering Department, Urmia University, Urmia, Iran.
2 Associate Professor, School of Engineering, Mining Engineering Department, Urmia University, Urmia, Iran.
3 Master of Mining Engineering, Mining and Material Engineering, Mining Engineering Department, Tarbiat Modares University, Tehran, Iran.
4 Master of Mining Engineering, School of Engineering, Mining Engineering Department, Urmia University, Urmia, Iran.
Abstract
The unregulated disposal of mining tailings poses a significant environmental challenge, primarily by contaminating water resources with toxic heavy metals. Hexavalent chromium, a highly mobile and carcinogenic species found in industrial by-products such as red mud from alumina production, is of particular concern. This study evaluates the efficacy of activated red mud as a cost-effective adsorbent for the remediation of hexavalent chromium from contaminated effluents. A series of batch adsorption studies was conducted to assess the effects of key operational variables, including solution pH, temperature, contact time, and the presence of ethylenediaminetetraacetic acid (EDTA). Under optimized conditions (pH 2.5, 30 °C, 7 hours), the adsorbent demonstrated a maximum removal efficiency of 72% in synthetic solutions. More significantly, when applied to authentic tailings effluent with an initial hexavalent chromium concentration of 1 mg/L, the process achieved a removal efficiency of 66.63 ± 1.45%. This result demonstrates the effectiveness of activated red mud for Cr(VI) removal under laboratory batch conditions. These findings affirm the viability of utilizing activated red mud as an effective adsorbent for mitigating chromium pollution from mining wastewaters, highlighting its potential as a sustainable water treatment solution.
Keywords
Main Subjects