Rock Mechanics
A. Alikhani; M. Taheri Moghadder; H. Mohammadi
Abstract
One of the most effective parameters in economics of open-pit mines is the pit slope angle, so that the slope angle more than the optimum value increases the probability of a large failure in the pit wall and the slope angle less than the optimum value leads to increasing stripping ratio and reducing ...
Read More
One of the most effective parameters in economics of open-pit mines is the pit slope angle, so that the slope angle more than the optimum value increases the probability of a large failure in the pit wall and the slope angle less than the optimum value leads to increasing stripping ratio and reducing net present value of mine. Therefore, in this paper, considering the limit equilibrium methods of modified Bishop and modified Janbu and numerical models of the slope stability analysis, the effect of overall slope angle on the Economics of open pit mines was investigated. In addition, it was shown that selecting the overall slope angle less than the optimum value leads to reducing the depth of open-pit mining (the ultimate pit depth) and consequently, reducing the net present value of mine. Finally, in homogenous and Isotropic media, the results of Bishop and Janbu and numerical modeling are close together.
Rock Mechanics
H. Mohammadi; H. Darbani
Abstract
There are various criteria that need to be examined alongside each other when designing a longwall mining system. Challenges such as determination of the supported roof width, support system design, caving height determination, lateral or chain pillar size determination, and optimum support design for ...
Read More
There are various criteria that need to be examined alongside each other when designing a longwall mining system. Challenges such as determination of the supported roof width, support system design, caving height determination, lateral or chain pillar size determination, and optimum support design for the main gate and tail gate roadways have to be tackled for this aim. Three-dimensional analysis would deliver the highest accuracy of induced stresses around the longwall working area. Thus, the main purpose of this paper is to develop a three dimensional geometrical computing model (3GCM) for calculating the induced stresses in both longitudinal and transverse loading orientations of the extraction panel. 3GCM is capable of studying the changes of induced stresses along the longitudinal orientation of working and the lateral pillar as well as the induced stresses ahead and behind of the face. The proposed computational model, for analyzing the vertical induced stresses, was used in one of the longwall workings in the Parvade-2 coal mine of Tabas, Iran. Validation of 3GCM has approved its high efficiency for the analysis of induced stresses within the working as well as surrounding areas.
