Exploitation
Samia Chaoui; Adel Djellali; Benghazi Zied; Sarker Debojit
Abstract
This study aims to investigate the stability of rooms and pillars along the inclined zinc orebody at the Chaabet El Hamra underground mine (Setif, Algeria). Stability was initially assessed using an analytical shear strength model, with the results subsequently validated through numerical modeling. Geomechanical ...
Read More
This study aims to investigate the stability of rooms and pillars along the inclined zinc orebody at the Chaabet El Hamra underground mine (Setif, Algeria). Stability was initially assessed using an analytical shear strength model, with the results subsequently validated through numerical modeling. Geomechanical characterization revealed low interstitial porosity, strong to very strong uniaxial compressive strengths ranging from 50.4 MPa to 129 MPa, and significant fracture-related secondary porosity. Rock Mass Rating (RMR89) and Geological Strength Index (GSI) values suggest fair to good rock quality. The mine design features square pillars inclined at 10°, with walls originally oriented perpendicular to the orebody dip, measuring 5 m in width and 3 m in height. The rooms, situated under a cover depth of 145.3 m, are 9 m wide. This configuration yielded an effective extraction rate of 87.24% and a safety factor of 1.63, indicating stable mining conditions. Phase 2D finite-element simulation confirmed these findings, showing a maximum displacement of 3.96 mm, surface subsidence of 0.57 mm, and a safety factor of 1.66, suggesting minimal environmental impact and long-term stability. Shear/compressive stress results from tributary area theory, aligning with numerical results and validating both approaches for inclined orebodies. Finally, the pillar walls, originally perpendicular to the orebody dip, were modified to be vertical relative to the horizontal plane, while maintaining the same pillar and room dimensions and cover depth. This adjustment improved stability by enhancing stress distribution and pillar core confinement, increasing the safety factor to 1.85.
