Rock Mechanics
Inobat Agzamova; Mukhiddin Juliev; Bаtir Abdurakhmanov; Nasiba Dadakhodjaeva; Alimjan Akhunjanov; Elboy Kurbanov; Nodira Ibragimova; Zulfizar Esanova
Abstract
Underground extraction in fractured polymetallic rock masses may trigger progressive deformation and surface collapse where faults, weak cover, groundwater pathways, and mining-induced disturbance interact. This study presents an evidence-constrained engineering-geological reconstruction of five collapse ...
Read More
Underground extraction in fractured polymetallic rock masses may trigger progressive deformation and surface collapse where faults, weak cover, groundwater pathways, and mining-induced disturbance interact. This study presents an evidence-constrained engineering-geological reconstruction of five collapse sinkholes that developed near the Khandiza polymetallic mine, southern Uzbekistan, during 2016–2018. The analysis integrates underground and surface mapping records, fault-distance classes, laboratory strength data, deformation observations, hydrogeological evidence, mine-development information, and repeated field measurements. The archival fracture-voidness coefficient, used as a comparative engineering index distinct from matrix porosity, increases from 1.5–3.0% at 15–20 m from major faults to 4.5–8.0% within fault zones and their influence belts, while uniaxial compressive strength decreases from 5–10 MPa to below 1–3 MPa. Across 28 laboratory shear-strength records, cohesion averages 16.83 ± 4.81 MPa and internal friction angle 42.05 ± 2.63°, with ranges of 7.1–27.0 MPa and 36–47°, respectively. The five sinkholes reached dimensions of approximately 12 × 13 to 60 × 80 m and visible depths of 6–40 m. Archived observations indicate a deformed area of about 0.8 km² and local crack widening or settlement rates up to 1–2 mm/day. Mining control is supported by the non-backfilled caving environment, progressive roof collapse, the reported connection of Sinkhole 2 to the 1340 m horizon, and the spatial-temporal association between extraction and surface deformation. Groundwater and seismic shaking are interpreted as contributory rather than independently demonstrated causes. The proposed model is therefore mechanistic and semi-quantitative rather than a calibrated predictive simulation.