Exploitation
Sruti Narwal; Debasis Deb; Sreenivasa Rao Islavath; Gopinath Samanta
Abstract
A novel underground mining method is proposed to extract friable chromite ore bodies in weak and weathered limonitic host rock below an open-pit mine. The conventional underground methods do not instil confidence since GSI (Geological Strength Index) of ore bodies and host rock lies below 35. Series ...
Read More
A novel underground mining method is proposed to extract friable chromite ore bodies in weak and weathered limonitic host rock below an open-pit mine. The conventional underground methods do not instil confidence since GSI (Geological Strength Index) of ore bodies and host rock lies below 35. Series of dimensions of transverse stopes along the strike are suggested based on a detailed analysis of multiple mining and backfilling operations by simulating 36 three-dimensional numerical models. For each operation or sequence, a strength-based “Mining Sequence Factor (MSF)” is devised that helps quantifying its equivalent strength compared to in-situ conditions. This factor along with the average equivalent plastic strain (AEPS) developed on the pillars as obtained from numerical models is used to determine the safe operations with desired yearly production target. The paper provides an in-depth analysis of this method and suggests minimum pillar dimensions of 40 m, whether in-situ or backfilled. The paper, in addition, lays the design of underground drives and their support system as per NGI (Norwegian Geotechnical Institute) guidelines and 3D numerical studies, the performance of which is analysed considering distribution of stress and equivalent plastic strain.
F. Abbasi; M.H. Khosravi; A. Jafari; Ali Bashari; B. Alipenhani
Abstract
The instability of the roof and walls of the tunnels excavated in coal mines has always attracted the attention of the miners and experts in this field. In this work, the instability of the main tunnels of the mechanized Parvadeh coal mine in Tabas, Iran, at the intersection with coal seam is studied. ...
Read More
The instability of the roof and walls of the tunnels excavated in coal mines has always attracted the attention of the miners and experts in this field. In this work, the instability of the main tunnels of the mechanized Parvadeh coal mine in Tabas, Iran, at the intersection with coal seam is studied. The main tunnels of this mine show significant horizontal displacements due to the complex ground conditions and great depth. The behavior of the rock mass surrounding the tunnel is investigated using various experimental methods, and according to the results obtained, the surrounding rock mass has squeezing conditions. In order to analyze the stability of the main tunnels, a series of 2D and 3D numerical modelings are performed using the FLAC2&3D finite difference software, and the results obtained are compared with the actual displacement values recorded in the walls of the main tunnels of the mine. The analysis results show that the tunnels under study are unstable with a steel frame support, and therefore, the use of different support systems for the stabilization is investigated. The results of modeling different types of support systems show that the use of shotcrete instead of galvanized sheet (as strut) does not have a significant effect on the reduced displacements. Also although the installation of steel sets is very effective in preventing the displacement of the walls, due to the swelling problems in the tunnel bottom and the placement of the conveyor and haulage rail, it cannot be used in practice. Finally, the use of truss bolt has yielded good results, and it can be proposed as a new support system in these tunnels. In addition, the modeling results show that in case the coal seam is higher than the tunnel foot, less displacement will occur in the tunnel walls compared to the other cases. In other words, changing the tunnel level in the future excavations can help reduce the displacements.
