H. Sarfaraz; A.R. Bahrami; R. Samani
Abstract
A common instability in the rock slopes is a toppling failure. If this type of slope failure occurs due to another kind of failure, it is considered as the secondary toppling failure. A type of secondary toppling failure is the slide-head-toppling failure. In this instability, the upper portion of the ...
Read More
A common instability in the rock slopes is a toppling failure. If this type of slope failure occurs due to another kind of failure, it is considered as the secondary toppling failure. A type of secondary toppling failure is the slide-head-toppling failure. In this instability, the upper portion of the slope is toppled, and the pressure caused by the overturning of rock blocks leads to a semi-circular sliding in the soil mass at the slope toe. This instability is examined through the theoretical analysis and physical modelling. Firstly, the failure mechanism mentioned above is described. Next, the slide-head-toppling failure is studied through seven numerical simulations. The Phase2 and UDEC softwares, as the finite element and distinct element methods, respectively, are used in this work. Different kinds of slide-head-toppling failure are modelled such as the blocky, block-flexural, and flexural toppling failures. The numerical modelling results are compared with the existing physical tests and theoretical approaches. This comparison illustrates that the safety factor is underestimated due to the plane strain supposition in numerical modelling. However, the side-friction in the physical models has violated this assumption. The results obtained demonstrate that the distinct element method has an acceptable accuracy compared to the finite element method. Thus this numerical code can be used in order to examine the mentioned failure.
Rock Mechanics
H. Sarfaraz; M. H. Khosravi; M. Amini
Abstract
In layered and blocky rock slopes, toppling failure is a common mode of instability that may occur in mining engineering. If this type of slope failure occurs as a consequence of another type of failure, it is referred to as the secondary toppling failure. “Slide-head-toppling” is a type ...
Read More
In layered and blocky rock slopes, toppling failure is a common mode of instability that may occur in mining engineering. If this type of slope failure occurs as a consequence of another type of failure, it is referred to as the secondary toppling failure. “Slide-head-toppling” is a type of secondary toppling failures, where the upper part of the slope is toppled as a consequence of a semi-circular sliding failure at the toe of the slope. In this research work, the slide-head-toppling failure is examined through a series of numerical modeling. Phase 2, as a software written based on the finite element method, is used in this work. Different types of slide-head-toppling failures including blocky, block-flexural, and flexural are simulated. A good agreement can be observed when the results of the numerical modeling are compared with those for the pre-existing physical modeling and analytical method.