Exploitation
S. Saadat
Abstract
Motivated by the recent successful results of using GIS modeling in a variety of problems related to the geosciences, some knowledge-based methods were applied to a regional scale mapping of the mineral potential, special for Cu-Au mineralization in the Feyz-Abad area located in the NE of Iran. Mineral ...
Read More
Motivated by the recent successful results of using GIS modeling in a variety of problems related to the geosciences, some knowledge-based methods were applied to a regional scale mapping of the mineral potential, special for Cu-Au mineralization in the Feyz-Abad area located in the NE of Iran. Mineral Prospectivity Mapping (MPM) is a multi-step process that ranks a promising target area for more exploration. In this work, five integration methods were compared consisting of fuzzy, continuous fuzzy, index overlay, AHP, and fuzzy AHP. For this purpose, geological maps, geochemical samples, and geophysics data were collected, and a spatial database was constructed. ETM + images were used to extract the hydroxyl and iron-oxide alterations, and to identify the linear and fault structures and prospective zones in regional scale; ASTER images were used to extract SiO2 index, kaolinite, chlorite, and propylitic alterations in a district scale. All the geological, geochemical, and geophysical data was integrated for MPM by different analysis. The values were determined by expert knowledge or logistic functions. Based upon this analysis, three main exploration targets were recognized in the Feyz-Abad district. Based on field observation, MPM was proved to be valid. The prediction result is accurate, and can provide directions for future prospecting. Among all the methods evaluated in this work, which tend to generate relatively similar results, the continuous fuzzy model seems to be the best fit in the studied area because it is bias-free and can be used to generate reliable target areas.
Exploitation
E. Ghasemi
Abstract
In underground excavation, where the road-headers are employed, a precise prediction of the road-header performance has a vital role in the economy of the project. In this paper, a new model is developed for prediction of the road-header performance using the non-linear multivariate regression analysis. ...
Read More
In underground excavation, where the road-headers are employed, a precise prediction of the road-header performance has a vital role in the economy of the project. In this paper, a new model is developed for prediction of the road-header performance using the non-linear multivariate regression analysis. This model is able to estimate the instantaneous cutting rate (ICR) of roadheader based on rock properties such as Brazilian tensile strength (BTS), rock mass cuttability index (RMCI), and alpha angle (α: is the angle between the tunnel axis and the planes of weakness). In order to construct and test the proposed model, a database including 62 cutting cases is used in the Tabas coal mine No. 1 in Iran. Various statistical performance indices were employed to evaluate the model efficiency. The results obtained indicate that the proposed non-linear regression model can be efficiently used to predict the road-header cutting performance. Furthermore, the prediction capacity of this model is better than the empirical models developed previously. Finally, it should be noted that the developed model is site-specific, and it can be used for preliminary estimation of ICR in future phases of Tabas coal mine No. 1. The outcome of this model can be helpful in adjustment of time-scheduling of the project.
Exploitation
A. Aryafar; H. Moeini
Abstract
Anomaly separation using stream sediment geochemical data has an essential role in regional exploration. Many different techniques have been proposed to distinguish anomalous from study area. In this research, a continuous restricted Boltzmann machine (CRBM), which is a generative stochastic artificial ...
Read More
Anomaly separation using stream sediment geochemical data has an essential role in regional exploration. Many different techniques have been proposed to distinguish anomalous from study area. In this research, a continuous restricted Boltzmann machine (CRBM), which is a generative stochastic artificial neural network, was used to recognize the mineral potential area in Korit 1:100000 sheet, located 15 km south of Tabas, South Khorasan Province (East of Iran). For this purpose, 470 geochemical stream sediment samples were collected from the study area and analyzed for 36 elements. In order to achieve the goal, in the first step, the robust factor analysis on compositional data was applied to reduce the data dimension and to limit the multivariate analysis by selecting the main components of mineralization. In this procedure, the third factor (out of 6) consisting of Cu, Pb, Zn, Sn, and Sb, related to the metallogenic properties, was considered as the input set in CRBM. In continuation, the CRBM structure with the best efficiency after trying different parameters was stabilized. High-identified error values or anomalies were exteracted using two different thresholds (ASC and ASE) after training with the whole data and reconstructing it by CRBM. The anomalies were then mapped. These indicated the promissing areas. The field studies and existing mining indices confirmly demonestrated the results obtained by CRBM.
Exploitation
M. Mohtasham; H. Mirzaei Nasirabad; A. Mahmoodi Markid
Abstract
Truck and shovel operations comprise approximately 60% of the total operating costs in open pit mines. In order to increase productivity and reduce the cost of mining operations, it is essential to manage the equipment used with high efficiency. In this work, the chance-constrained goal programing (CCGP) ...
Read More
Truck and shovel operations comprise approximately 60% of the total operating costs in open pit mines. In order to increase productivity and reduce the cost of mining operations, it is essential to manage the equipment used with high efficiency. In this work, the chance-constrained goal programing (CCGP) model presented by Michalakopoulos and Panagiotou is developed to determine an optimal truck allocation plan in open pit mines and reduce the waiting times of trucks and shovels. The developed goal programming (GP) model is established considering four desired goals: “maximizing shovel production”, “minimizing deviations in head grade”, “minimizing deviations in tonnage feed to the processing plants from the desired feed” and “minimizing truck operating costs”. To employ the developed model, a software is prepared in Visual Studio with C# programming language. In this computer program, the CPLEX optimizer software is incorporated for solving the developed goal programing model. The case study of Sungun copper mine is also considered to evaluate the presented GP model and prepared software. The results obtained indicate that the developed model increases the mine production above 20.6% with respect to the traditional truck allocation plan, while meeting the desired grade and the stripping ratio constraints.
Exploitation
S. Abbaszadeh; Seyed R. Mehrnia; S. Senemari
Abstract
The Ramand region is a part of the magmatic belt in Urmieh-Dokhtar structural zone in Iran, located in the SW of BuinـZahra. This area mainly consists of felsic extrusions such as rhyolites and rhyodacites. Argillic alterations with occurrences of mineralized silica veins are abundant in most of the ...
Read More
The Ramand region is a part of the magmatic belt in Urmieh-Dokhtar structural zone in Iran, located in the SW of BuinـZahra. This area mainly consists of felsic extrusions such as rhyolites and rhyodacites. Argillic alterations with occurrences of mineralized silica veins are abundant in most of the volcanic units. In this research work, we used the GIS facilities for modeling the Ramand geo-spatial databases according to the Fuzzy logic algorithms. The main phase of mineralization occurred in the altered regions and is located near the cross cut fault systems. Therefore, the main criteria for integration were the geological, structural, geophysical, and remotely sensed (Landsat7, ETM+) layers. Also we used a contoured aeromagnetic map for revealing and weighting lineaments. By the Fuzzy techniques applied, all the evidential themes were integrated to prognosis of ore mineralization potentials based on γ = 0.75. As a result, the hydrothermal alterations and their relevant post-magmatic mineralization were introduced in the south and eastern parts of the Ramand region by the fuzzification procedures. Our highlighted recommendation for more exploration activities is focused on the geophysical land surveys (electric and magnetic fields), and the geochemical sampling from mineralized regions in the depth and outcrops of alterations.
Exploitation
H. Shahi
Abstract
Discrimination of the blind and dispersed mineralization deposits is a challenging problem in geochemical exploration. The frequency domain (FD) of the surface geochemical data can solve this important issue. This new exploratory information can be achieved using the interpretation of FD of geochemical ...
Read More
Discrimination of the blind and dispersed mineralization deposits is a challenging problem in geochemical exploration. The frequency domain (FD) of the surface geochemical data can solve this important issue. This new exploratory information can be achieved using the interpretation of FD of geochemical data, which is impossible in spatial domain. In this research work, FD of the surface geochemical data is analyzed to decompose the complex geochemical patterns related to the mineral deposits. In order to identify the dispersed mineralization zone in the Chichakloo Pb–Zn deposit, a newly developed approach is proposed based on the coupling of two-dimensional Fourier transform (2DFT) and principal component analysis (PCA). The surface geochemical data is transferred to FD using 2DFT, and two low-pass filters are designed and performed on FD. Then the PCA method is employed on these frequency bands (FBs) separately. This proposed scenario desirably illustrates the relationship between the low frequencies in the surface geochemical distribution map (GDM) and the deep deposits. The informations obtained from the detailed exploration and the exploration drillings such as boreholes confirm the results obtained from this method. This new combined approach is a valuable data-processing tool and pattern-recognition technique in geochemical explorations. This approach is quite inexpensive compared to the traditional exploration methods.
Exploitation
E. Bakhtavar; A. Jafarpour; S. Yousefi
Abstract
In order to catch up with reality, all the macro-decisions related to long-term mining production planning must be made simultaneously and under uncertain conditions of determinant parameters. By taking advantage of the chance-constrained programming, this paper presents a stochastic model to create ...
Read More
In order to catch up with reality, all the macro-decisions related to long-term mining production planning must be made simultaneously and under uncertain conditions of determinant parameters. By taking advantage of the chance-constrained programming, this paper presents a stochastic model to create an optimal strategy for producing bimetallic deposit open-pit mines under certain and uncertain conditions. The uncertainties of grade, price per product, and capacities of the various stages in the process of production of the final product were considered. The results of solving the deterministic and stochastic models showed that the stochastic model had a greater compatibility and performance than the other ones.
Exploitation
A. Hosseini; M. Najafi; Seyed A. Shojaatlhosseini; R. Rafiee
Abstract
The longwall mining method is one of the most applied methods in extracting low-inclined to high-inclined coal seams. Selection of the most suitable extraction equipment is very important in the economical, safety, and productivity aspects of mining operations. There are a lot of parameters affecting ...
Read More
The longwall mining method is one of the most applied methods in extracting low-inclined to high-inclined coal seams. Selection of the most suitable extraction equipment is very important in the economical, safety, and productivity aspects of mining operations. There are a lot of parameters affecting the selection of an extraction equipment in mechanized longwall mining in steeply inclined coal seams. The important criteria involved are the geometric properties of coal seam (dip, thickness, and uniformity of coal seam), geological and hydraulic conditions (faults, fractures, joints, and underground water), and geomechanical properties of coal seam and surrounding rocks. Extraction of inclined coal seams with gradients greater than 40 degree is different from low-inclined seams, and requires a special equipment. Therefore, the influence of the above-mentioned parameters must be considered simultaneously in the selection of extraction equipment for steeply inclined seams. This paper presents an application of the Fuzzy Analytical Hierarchy Process (FAHP) method in order to select a suitable extraction equipment in the Hamkar coal mine. In the proposed FAHP model, fifteen main criteria are considered, as follow: dip of coal seam, thickness of coal seam, seam uniformity, expansion of coal seam, faults, fractures and joints, underground waters, hangingwall strength, footwall strength, coal strength, in-situ stress, equipment salvage, dilution, system flexibility, and operational costs. Among the 6 considered longwall extraction equipment system alternatives, the findings show that the most suitable extraction equipment system is shearer on footwall and a support system using hydraulic props and the transport of coal with the force of gravity.
