TY - JOUR ID - 2039 TI - Support Analysis of Main Tunnels in Tabas Mechanized Parvadeh Mine at Intersection with Coal Seam JO - Journal of Mining and Environment JA - JME LA - en SN - 2251-8592 AU - Abbasi, F. AU - Khosravi, M.H. AU - Jafari, A. AU - Bashari, Ali AU - Alipenhani, B. AD - School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran AD - Technical department at TPCCO, Tabas, Iran Y1 - 2021 PY - 2021 VL - 12 IS - 3 SP - 711 EP - 724 KW - Stability analysis KW - Numerical Modeling KW - Support system KW - Parvadeh coal mine in Tabas KW - Truss bolt DO - 10.22044/jme.2021.10610.2014 N2 - The instability of the roof and walls of the tunnels excavated in coal mines has always attracted the attention of the miners and experts in this field. In this work, the instability of the main tunnels of the mechanized Parvadeh coal mine in Tabas, Iran, at the intersection with coal seam is studied. The main tunnels of this mine show significant horizontal displacements due to the complex ground conditions and great depth. The behavior of the rock mass surrounding the tunnel is investigated using various experimental methods, and according to the results obtained, the surrounding rock mass has squeezing conditions. In order to analyze the stability of the main tunnels, a series of 2D and 3D numerical modelings are performed using the FLAC2&3D finite difference software, and the results obtained are compared with the actual displacement values recorded in the walls of the main tunnels of the mine. The analysis results show that the tunnels under study are unstable with a steel frame support, and therefore, the use of different support systems for the stabilization is investigated. The results of modeling different types of support systems show that the use of shotcrete instead of galvanized sheet (as strut) does not have a significant effect on the reduced displacements. Also although the installation of steel sets is very effective in preventing the displacement of the walls, due to the swelling problems in the tunnel bottom and the placement of the conveyor and haulage rail, it cannot be used in practice. Finally, the use of truss bolt has yielded good results, and it can be proposed as a new support system in these tunnels. In addition, the modeling results show that in case the coal seam is higher than the tunnel foot, less displacement will occur in the tunnel walls compared to the other cases. In other words, changing the tunnel level in the future excavations can help reduce the displacements. UR - https://jme.shahroodut.ac.ir/article_2039.html L1 - https://jme.shahroodut.ac.ir/article_2039_00276de920df7fb5c057ec45c16685e6.pdf ER -