<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Shahrood University of Technology</PublisherName>
				<JournalTitle>Journal of Mining and Environment</JournalTitle>
				<Issn>2251-8592</Issn>
				<Volume>9</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2018</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Solvent extraction of copper from an industrial sulfate liquor using Chemorex CP-150</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>905</FirstPage>
			<LastPage>916</LastPage>
			<ELocationID EIdType="pii">1271</ELocationID>
			
<ELocationID EIdType="doi">10.22044/jme.2018.7161.1568</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>S.</FirstName>
					<LastName>Feizollahi</LastName>
<Affiliation>Faculty of Mining, Petroleum &amp; Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran</Affiliation>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Azizi</LastName>
<Affiliation>Faculty of Mining, Petroleum &amp; Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>06</Month>
					<Day>13</Day>
				</PubDate>
			</History>
		<Abstract>The extraction behavior of Cu(II) ions from a real sulfate liquor obtained from the heap leaching stage of a copper oxide ore was investigated using a chelating reagent, Chemorex CP-150 in kerosene. A comparative study was also carried out on the extraction capability of Cu(II) ions using other solvents including D2EHPA and Cyanex 272.Chemorex CP-150 demonstrated an effective and selective extraction performance of copper with the amount of extracted Fe less than 15%. Also the results obtained indicated that more than 66.4% and 96.99% of Cu were transferred to the organic phase in a single extraction stage using 15% (v/v) Chemorex CP-150 at the A:O phase ratios of 1:1 and 1:4, respectively. In addition, the McCabe-Thiele diagram exhibited that two extraction stages were required to achieve the maximum amount of Cu at a 1:1 phase ratio under the optimal conditions (25 °C, pH 2.5, and 20 min contact time). Also, thermodynamic data proved that the extraction process was slightly endothermic (ΔH = 7.62 kJ/mol), indicating the relatively smaller heat effects on the formation of a single complex species (CuR&lt;sub&gt;2&lt;/sub&gt;). Stripping of copper from the loaded organic phase was also conducted, and it was found that ~99.38% copper could be recovered using 165 g/L H&lt;sub&gt;2&lt;/sub&gt;SO&lt;sub&gt;4&lt;/sub&gt; at a 2:1 A:O phase ratio after 5 minutes stripping.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Copper extraction</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Pregnant leach solution</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Solvent extraction</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Stripping</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Chemorex CP-150</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jme.shahroodut.ac.ir/article_1271_f6139a3e62e25966cc0a428279520b79.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
