<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Shahrood University of Technology</PublisherName>
				<JournalTitle>Journal of Mining and Environment</JournalTitle>
				<Issn>2251-8592</Issn>
				<Volume>17</Volume>
				<Issue>5</Issue>
				<PubDate PubStatus="epublish">
					<Year>2026</Year>
					<Month>08</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Optimization of flotation parameters for copper recovery from low-grade copper ore: a case study in Pakistan</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1567</FirstPage>
			<LastPage>1579</LastPage>
			<ELocationID EIdType="pii">3953</ELocationID>
			
<ELocationID EIdType="doi">10.22044/jme.2026.17521.3482</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Zaheer</FirstName>
					<LastName>Ahmed</LastName>
<Affiliation>Mining Engineering Department, University of Engineering &amp; Technology, Lahore, Pakistan</Affiliation>

</Author>
<Author>
					<FirstName>Muhammad</FirstName>
					<LastName>Bilal</LastName>
<Affiliation>Reko Diq Mining Company (Private) Limited, Balochistan, Pakistan</Affiliation>

</Author>
<Author>
					<FirstName>Zulfiqar</FirstName>
					<LastName>Ali</LastName>
<Affiliation>Mining Engineering Department, University of Engineering &amp; Technology, Lahore, Pakistan</Affiliation>

</Author>
<Author>
					<FirstName>Muhammad Badar</FirstName>
					<LastName>Hayat</LastName>
<Affiliation>Mining Engineering Department, University of Engineering &amp; Technology, Lahore, Pakistan</Affiliation>

</Author>
<Author>
					<FirstName>Kazutoshi</FirstName>
					<LastName>HAGA</LastName>
<Affiliation>Graduate School of International Resource Sciences, Akita University, 1-1 Tegata-Gakuenmachi, Akita 010-8502, Japan</Affiliation>

</Author>
<Author>
					<FirstName>Atsushi</FirstName>
					<LastName>Shibayama</LastName>
<Affiliation>Graduate School of International Resource Sciences, Akita University, 1-1 Tegata-Gakuenmachi, Akita 010-8502, Japan</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2026</Year>
					<Month>02</Month>
					<Day>20</Day>
				</PubDate>
			</History>
		<Abstract>Low-grade copper–gold porphyry ores present significant processing challenges due to poor mineral dissemination and high gangue content. In this study, a representative ore sample from the Saindak Copper–Gold Project, Pakistan, with an average copper grade of 0.4 wt%, was investigated to optimize flotation parameters for improved copper recovery. Mineralogical characterization using XRD, XRF, SEM–EDS, and ICP-OES confirmed chalcopyrite as the primary copper-bearing mineral finely disseminated within silicate gangue and iron sulfides. A series of batch flotation experiments were conducted by systematically varying particle size, slurry pH, collector dosage, and flotation time. The results showed that optimal conditions (particle size &lt;75 μm, pH 12, and 1-min flotation time) enabled selective chalcopyrite recovery. Optimal flotation performance was achieved at pH 12 with a collector dosage of 5 g/t and a flotation time of 1 min, yielding a copper recovery of approximately 93% and a concentrate grade of 23 wt% under multistage flotation conditions. Flotation kinetics analysis indicated that the first-order kinetic model provided the best fit to the experimental data. The findings demonstrate that efficient copper upgrading from low-grade Saindak ore can be achieved with minimal collector consumption, offering a potentially cost-effective and sustainable processing strategy for similar porphyry copper deposits.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Mineral processing</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Copper ore flotation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Comminution</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jme.shahroodut.ac.ir/article_3953_535ead2ad459be99c321e5e297549438.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
