Platform Motion at Lower Loading Station in Trucklift Slope Hoisting System with Varying Profile of Track

Kim, Kwang Hyok; Han, Tok Hyong; Han, Un Chol; Hong, Ryo Myong

doi:10.22044/jme.2023.12490.2267

Document Type : Original Research Paper

Authors

¹ Faculty of Mining Engineering, Kim Chaek University of Technology, Pyongyang, Democratic People’s Republic of Korea

² School of Science and Engineering, Kim Chaek University of Technology, Pyongyang, Democratic People’s Republic of Korea

https://doi.org/10.22044/jme.2023.12490.2267

Abstract

This paper focuses on a study concerned with estimation of the platform motion at the lower loading station in the Trucklift slope hoisting system with varying profile of track. The TruckLift slope hoisting system is an innovative transport technology for open-pit mines, and considerably accelerates and cheapens transport from mine. When a truck drives onto or drives off the platform at the lower loading station in the Trucklift slope hoisting system with varying profile of track, the platform motion influences the operation of the Trucklift slope hoisting system, and the configuration of inclined rope hitched to the platform is varied. The simulation result by using the ADAMS (Automatic Dynamic Analysis of Mechanical Systems) software shows that the horizontal distance between lower loading station and platform varies when a truck drives onto or off the platform and the initial horizontal distance that is the distance between lower loading station and platform when the winder is applied the brake, can be an important factor in operation of the Trucklift slope hoisting system with varying profile track.

Keywords

20.1001.1.22518592.2023.14.1.5.4

References

[1] Technical Information. (2015). TruckLift System (Innovative Transport Technology for Open Pit Mines). www.siemag-tecberg.com, Sep 7, 2015.

[2] Wu, Q., Takahashi, K., and Nakamura, S. (2005). Formulae for frequencies and modes of in-plane vibrations of small-sag inclined ropes. J. Sound Vib. 279, 1155–1169.

[3] Zhou, X., Yan, S., and Chu, F. (2011). In-plane free vibrations of an inclined taut cable. J. Vib. Acoust 133, 1–9.

[4] Sorokin, S.V. and Rega, G. (2007). On modelling and linear vibrations of arbitrarily sagged inclined ropes in a quiescent viscous fluid. J. Fluids Struct. 23, 1077–1092.

[5] Rega, G., Srinil, N., and Alaggio, R. (2008). Experimental and numerical studies of inclined cables: free and parametrically-forced vibrations. J. Theor. App. Mech-Pol. 46, 621–640.

[6] Mansour, A., Mekki, O.B., Montassar, S., and Rega, G. (2017). Catenary-induced geometric nonlinearity effects on cable linear vibrations. J. Sound Vib. 413, 332–353.

[7] Ni, Y.Q., Ko, J.M., and Zheng, G. (2002). Dynamic analysis of large-diameter sagged cables taking into account flexural rigidity. J. Sound Vib. 257, 301–319.

[8] Ricciardi, G. and Saitta, F. (2008). A continuous vibration analysis model for cables with sag and bending stiffness. Eng. Struct. 30, 1459–1472.

[9] Srinil, N., Wiercigroch, M., and O’Brien, P. (2009). Reduced-order modelling of vortex-induced vibration of catenary riser. Ocean Eng. 36, 1404–1414.

[10] Arena, A., Pacitti, A., and Lacarbonara, W. (2016). Nonlinear response of elastic cables with flexural-torsional stiffness. Int. J. Solids Struct. 87, 267–277.

[11] Wang Y., Cao, G, and van Horssen, W.T. (2018). Dynamic simulation of a multi-cable driven parallel suspension platform with slack cables. Mech. Mach. Theory 126, 329–343.

Journal of Mining and Environment

Platform Motion at Lower Loading Station in Trucklift Slope Hoisting System with Varying Profile of Track

References

References

Volume 14, Issue 1
January 2023
Pages 66-77

Platform Motion at Lower Loading Station in Trucklift Slope Hoisting System with Varying Profile of Track

References

References

Volume 14, Issue 1January 2023Pages 66-77

Volume 14, Issue 1
January 2023
Pages 66-77