Document Type : Original Research Paper
Authors
Department of Civil Engineering, National Institute of Technology Hamirpur, Himachal Pradesh, India
Abstract
Slope stability is critical for infrastructure safety, particularly in seismically active regions. This work evaluates the stability of a slope along the Baroti-Reyur road in Himachal Pradesh, located in Zone 5, using a novel combination of Limit Equilibrium Methods (LEMs) and Finite Element Methods (FEMs). The analysis examines natural slope conditions and the impact of sustainable mitigation measures, including retaining structures and bioengineering techniques, under the static and dynamic conditions. The soil model incorporated a modulus of elasticity (E) of 90,000 kN/m², and a poisson's ratio (v) of 0.3 to reflect realistic slope-soil-structure interactions. Retaining structures such as gravity, cantilever, and gabion walls (4 m, 6 m, and 5 m high) were constructed using M30 RCC and Fe500 steel. Bioengineering measures featured deep-rooted grasses like Vetiver and Broom grass to improve soil cohesion (c), shrubs like Lantana camara for surface stability, and trees like Albizia lebbeck to reinforce deeper soil layers. These vegetation-based interventions enhanced slope resilience, while promoting ecological restoration. Theoretical LEM analysis revealed marginal stability, with static FOS values of 1.1 and pseudo-static FOS of 1.05. GEO5 pseudo-static analysis indicated critically low FOS value of 0.88 for dynamic saturated conditions, improving to 2.01 with retaining structures. FEM analysis using PLAXIS 2D provided more detailed insights, capturing complex soil-structure interactions with a static FOS of 1.028 and dynamic FOS of 0.994. By combining FEM with sustainable mitigation strategies, this work offers a framework for resilient slope stabilization, ensuring safety, while promoting environmental sustainability in seismically active regions.
Keywords
Main Subjects
- Griffiths, D. V., & Lane, P. A. (1999). Slope stability analysis by finite elements. Geotechnique, 49(3), 387-403.
- Hammouri, N. A., Malkawi, A. I. H., & Yamin, M. M. (2008). Stability analysis of slopes using the finite element method and limiting equilibrium approach. Bulletin of Engineering Geology and the Environment, 67, 471-478.
- Santo, S. A., Hossain, A. F., Fariha, A. S., Haque, M. E., & Ansary, M. A. (2024). Assessment of seismic slope stability of Rangamati Hill Tracts, Bangladesh. Discover Geoscience, 2(1), 1.
- Singh, P., & Mittal, S. FINITE ELEMENT SLOPE STABILITY ANALYSES OF A SLOPE IN THE HIMALAYAN REGION OF INDIA CONSIDERING SELF-DRILLING ANCHORS.
- Garo, T., Tesfaye, M., & Karuppannan, S. (2024). Slope stability modeling using limit equilibrium and finite element methods: a case study of the Adama City, Northern Main Ethiopian Rift. Quaternary Science Advances, 15, 100228.
- Jhinkwan, V. S., Chore, H. S., & Kumar, A. (2024). Assessment of Stability of Slopes and Remedial Measures in Lesser Himalayan Region: An Overview. Indian Geotechnical Journal, 1-23.
- Arun, K. U., Jisna, P., Simon, R., Mathews, O. A., & Anju, E. M. (2020). A comparison study on stability of Kuranchery slopes using GEO5 and PLAXIS 2D software. International Journal of Research in Engineering, Science and Management, 3(3), 4.
- Alemdag, S., Zeybek, H. I., & Kulekci, G. (2019). Stability evaluation of the Gümüşhane-Akçakale cave by numerical analysis method. Journal of Mountain Science, 16(9), 2150-2158.
- Luc Leroy, M. N., Kenmoe, O. R. M., Tchognia Nkuissi, H. J., Lawou Kouayep, S., Nkenwoum Chebou, G., Chéagé Chamgoué, A., & Mohamadou, I. (2024). Comparative Analysis of the Slope Stability Using Slide and Plaxis 2D Software: A Case Study of Tombel Pozzolan Quarry (South‐West Cameroon). Applied and Environmental Soil Science, 2024(1), 8260177.
- Kadakci Koca, T., & Koca, M. Y. (2020). Comparative analyses of finite element and limit-equilibrium methods for heavily fractured rock slopes. Journal of Earth System Science, 129(1), 49.
- Ongpaporn, P., Jotisankasa, A., & Likitlersuang, S. (2022). Geotechnical investigation and stability analysis of bio-engineered slope at Surat Thani Province in Southern Thailand. Bulletin of Engineering Geology and the Environment, 81(3), 84.
- Patial, S., Kumar, V., Sharma, H., Mahajan, A. K., Kumar, P., & Negi, S. (2022). Landslide disaster risk reduction through Bioengineering at Soldha, Kangra, Himachal Pradesh-A case study.
- Patial, S., Kumar, V., Sharma, H., Mahajan, A. K., Kumar, P., Pandey, A. K., & Negi, S. Assessing Landslide Stability: Integrating Geophysical, Geochemical, and Geotechnical Approaches for Bioengineering Mitigation.
- Ray, A., Bharati, A. K., Verma, H., Rai, R., & Singh, T. N. (2023). Numerical study of the utility of bioengineering technique for slope stabilisation. Geomechanics and Geoengineering, 18(4), 253-271.
- Saim, N. M., & Kasa, A. (2023, August). Comparative analysis of slope stability using finite element method (FEM) and limit equilibrium method (LEM). In 2023 IEEE 14th Control and System Graduate Research Colloquium (ICSGRC)(pp. 224-229). IEEE.
- Luc Leroy, M. N., Kenmoe, O. R. M., Tchognia Nkuissi, H. J., Lawou Kouayep, S., Nkenwoum Chebou, G., Chéagé Chamgoué, A., & Mohamadou, I. (2024). Comparative Analysis of the Slope Stability Using Slide and Plaxis 2D Software: A Case Study of Tombel Pozzolan Quarry (South‐West Cameroon). Applied and Environmental Soil Science, 2024(1), 8260177.
- Kumar, S., & Sharma, R. K. (2024). Stability Analysis of Slope of a Pump House Building and Water Storage Tank at Narkanda, India: A case study. Journal of Mining and Environment, 15(4), 1227-1240.
- Mebrahtu, T. K., Heinze, T., Wohnlich, S., & Alber, M. (2022). Slope stability analysis of deep-seated landslides using limit equilibrium and finite element methods in Debre Sina area, Ethiopia. Bulletin of Engineering Geology and the Environment, 81(10), 403.
- Varkey, D., Hicks, M. A., & Vardon, P. J. (2023). Effect of uncertainties in geometry, inter-layer boundary and shear strength properties on the probabilistic stability of a 3D embankment slope. Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 17(2), 262-276.
- Yadav, D. K., Mishra, P., Jayanthu, S., & Das, S. K. (2022). On the application of IoT: slope monitoring system for open-cast mines based on LoRa wireless communication. Arabian Journal for Science and Engineering, 47(2), 1387-1398.
- Truong, P., & Loch, R. (2004, July). Vetiver system for erosion and sediment control. In Proceeding of 13th international soil conservation organization conference(pp. 1-6).
- Gray, D. H., & Sotir, R. B. (1996). Biotechnical and soil bioengineering slope stabilization: a practical guide for erosion control. John Wiley & Sons.
- Barker, D. (Ed.). (1995). Vegetation and slopes: stabilisation, protection and ecology. Thomas Telford.
- Norris, J. E., Stokes, A., Mickovski, S. B., Cammeraat, E., Van Beek, R., Nicoll, B. C., & Achim, A. (Eds.). (2008). Slope stability and erosion control: ecotechnological solutions. Springer Science & Business Media.
- Bureau of Indian Standards (1976) IS 4968-1: Method for subsurface sounding for soils - Part 1 Dynamic cone penetration test. New Delhi: Bureau of Indian Standards.
- Bureau of Indian Standards (1976) IS 8009-1: Code of practice for calculation of settlement of foundations - Part 1: Shallow foundations subjected to symmetrical static vertical loads. New Delhi: Bureau of Indian Standards.
- IS 1904 (1986): Code of practice for design and construction of foundations in soils: General requirements [CED 43: Soil and Foundation Engineering].
- Bureau of Indian Standards (1973) IS 2720-2: Methods of test for soils - Part 2: Determination of water content. New Delhi: Bureau of Indian Standards.
- Bureau of Indian Standards (1980) IS 2720-3: Methods of test for soils - Part 3: Determination of specific gravity. New Delhi: Bureau of Indian Standards.
- Bureau of Indian Standards (1985) IS 2720-5: Methods of test for soils - Part 5: Determination of liquid and plastic limit. New Delhi: Bureau of Indian Standards.
- IS 2720-11 (1993): Methods of test for soils, Part 11: Determination of the shear strength parameters of a specimen tested in unconsolidated undrained triaxial compression without the measurement of pore water pressure [CED 43: Soil and Foundation Engineering].
- DR, G. (1987). Vegetation and slope stability. Slope stability, 187-230.
- Asada, H., & Minagawa, T. (2023). Impact of vegetation differences on shallow landslides: A case study in Aso, Japan. Water, 15(18), 3193.
- Hoek, E., & Bray, J. D. (1981). Rock slope engineering. CRC press.
- IS 1893: Part 1: 2016: Criteria for Earthquake Resistant Design of Structures - Part 1: General Provisions and Buildings.
- Griffiths, D. V., & Lane, P. A. (1999). Slope stability analysis by finite elements. Geotechnique, 49(3), 387-403.
- Wolf, J. P. (1987). Soil-structure-interaction analysis in time domain. In Structural mechanics in reactor technology.
- Kuhlemeyer, R. L., & Lysmer, J. (1973). Finite element method accuracy for wave propagation problems. Journal of the soil mechanics and foundations division, 99(5), 421-427.
- IS14243-2. Guidelines for selection and development of site for building in hill areas, Part 2: Selection and development. Bur. Indian Stand. N.Delhi, India, 1995.
- IS 14458-1 (1998): Guidelines for retaining wall for hill area, Part 1: Selection of type of wall [CED 56: Hill Area Development Engineering].
- Kumar, A., Sharma, R. K., & Mehta, B. S. (2020). Slope stability analysis and mitigation measures for selected landslide sites along NH-205 in Himachal Pradesh, India. Journal of Earth System Science, 129(1), 135.
- Khanna, R., & Dubey, R. K. (2021). Comparative assessment of slope stability along road-cuts through rock slope classification systems in Kullu Himalayas, Himachal Pradesh, India. Bulletin of Engineering Geology and the Environment, 80(2), 993-1017.
)