A

  • Abbasi Gharaei, A. X-Ray mapping and the mineralogy pattern of nickel laterite ore: Bavanat, Fars, Iran [Volume 10, Issue 3, 2019, Pages 811-820]

  • Abbaszade, S. Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]

  • Abdolghanizadeh, K. Effects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar [Volume 10, Issue 4, 2019, Pages 967-978]

  • Abdollahi, H. Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]

  • Abdollahi, H. Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]

  • Abdollahipour, A. Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]

  • Abdollahy, M. Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]

  • Abdollahy, M. Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]

  • Abedi, M. Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]

  • Adjiski, V. Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]

  • Afzal, P. Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]

  • Afzal, P. Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]

  • Aghajani Bazzazi, A. Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines [Volume 10, Issue 4, 2019, Pages 903-916]

  • Ahangari, K. Effect of segmental joint stiffness on tunnel lining internal forces under static conditions [Volume 10, Issue 4, 2019, Pages 1031-1043]

  • Ahmadi, M. A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]

  • Akhyani, M. Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process [Volume 10, Issue 3, 2019, Pages 559-574]

  • Ali, M. Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]

  • Alikhani, A. Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]

  • Alilou, S. K. Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]

  • Alinia, F. Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]

  • Alipour, S. Metal(loid) uptake of Sonchus oleraceus grown around Cheshmeh-Konan copper deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 517-528]

  • Amini, M. Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]

  • Amini, M. Numerical analysis of slide-head-toppling failure [Volume 10, Issue 4, 2019, Pages 1001-1011]

  • Amini, R. Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]

  • Arab Amiri, A.R. Using a combination of genetic algorithm and particle swarm optimization algorithm for GEMTIP modeling of spectral-induced polarization data [Volume 10, Issue 2, 2019, Pages 493-505]

  • Arab-Amiri, A.R. A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]

  • Arashi, M. Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]

  • Arghavani, E. Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]

  • Arjmand, R. Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]

  • Aryafar, A. Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]

  • Asghari, O. Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]

  • Asghari, O. Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]

  • Askarbioki, M. H. Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]

  • Ataee-pour, M. Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]

  • Ataei, M. Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]

  • Ataei, M. Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]

  • Ataei, M. Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]

  • Azad, M. R. Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]

  • Azadi, M. R. Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]

  • Azghadi, M. Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]

  • Azmi, H. Geostatistical estimation to delineate oxide and sulfide zones using geophysical data; a case study of Chahar Bakhshi vein-type gold deposit, NE Iran [Volume 10, Issue 3, 2019, Pages 679-694]

B

  • Bahrammanesh, M. Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]

  • Bakhshandeh Amnieh, H. Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines [Volume 10, Issue 4, 2019, Pages 903-916]

  • Bakhshi, E. Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]

  • Balesini, A.A. Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]

  • Bangian Tabrizi, A. H. Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]

  • Banisi, S. Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]

  • Banisi, S. Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]

  • Barani, K. Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]

  • Bavand Savadkoohi, M. A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]

  • Behnamfard, A. Beneficiation of a low-grade iron ore by combination of wet low-intensity magnetic separation and reverse flotation methods [Volume 10, Issue 1, 2019, Pages 197-212]

  • Behnamfard, A. Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]

  • Bour, K. Study of convergence confinement method curves considering pore-pressure effect [Volume 10, Issue 2, 2019, Pages 479-492]

D

  • Daneshvar Saein, L. Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]

  • Dehgani, E. Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]

  • Dehghan, R. Use of density tracers in evaluating performance of Tri-Flo circuits Case study: Tabas (Iran) coal preparation plant [Volume 10, Issue 2, 2019, Pages 441-450]

  • Dehvedar, M. Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]

  • Despodov, Z. Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]

  • Dormishi, A.R. Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]

  • Doulati Ardejani, F. Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]

E

  • Ebadi, H. Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]

  • Ehsani, Seyedeh M. Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]

F

  • Farzaneh Bahalgardi, N. Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]

  • Fatehi Marji, M. Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]

  • Fatehi Marji, M. Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]

  • Fatemi Aghda, Seyed M. Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]

  • Fattahi, H. Bayesian prediction of rotational torque to operate horizontal drilling [Volume 10, Issue 2, 2019, Pages 507-515]

G

  • Ganjeh, M. Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]

  • Ghadiri-Sufi, E. Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]

  • Gharabaghi, M. Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]

  • Ghasemi, A.R. Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]

  • Ghasemi, A.R. Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]

  • Ghasemi, E. Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties [Volume 10, Issue 4, 2019, Pages 917-928]

  • Ghasemi, S. Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]

  • Ghasemzadeh, S. Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]

  • Ghasvareh, M. A. Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]

  • Ghoddocy Nejad, D. Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]

  • Gholampour, O. Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]

  • Ghorbani, A. Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]

  • Gloaguen, E. A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]

  • Godbole, A. DPM flow pattern of LHD in underground mines with different ventilation conditions [Volume 10, Issue 2, 2019, Pages 315-326]

  • Golmohammadi, A. Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]

  • Goshtasbi, K. New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]

  • Goshtasbi, K. Study of convergence confinement method curves considering pore-pressure effect [Volume 10, Issue 2, 2019, Pages 479-492]

H

  • Habibnia, A. Anomaly delineation of porphyry copper deposits of Hanza Region through geochemical data analyses and multispectral remote sensing [Volume 10, Issue 3, 2019, Pages 747-762]

  • Haghnazar, H. Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]

  • Hakimiyan Bidgoli, M. Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines [Volume 10, Issue 4, 2019, Pages 903-916]

  • Hamidian Shoormasti, H. X-Ray mapping and the mineralogy pattern of nickel laterite ore: Bavanat, Fars, Iran [Volume 10, Issue 3, 2019, Pages 811-820]

  • Hasankhoei, A.R. Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]

  • Hasanzadeh_Sablouei, A. Copper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study [Volume 10, Issue 4, 2019, Pages 1013-1029]

  • Hashemzadeh Ansar, B. Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]

  • Hassani, H. Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]

  • Hezarkhani, A. Identification of geochemical anomalies associated with Cu mineralization by applying spectrum-area multi-fractal and wavelet neural network methods in Shahr-e-Babak mining area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 49-73]

  • Hezarkhani, A. Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]

  • Hezarkhani, A. Application of fractal modeling to delineate alteration zones and lithological units in Masjed-Daghi Cu-Au porphyry deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 339-356]

  • Hezarkhani, A. Delineation of alteration zones based on artificial neural networks and concentration-volume fractal methods in the hypogene zone of porphyry copper-gold deposit, Masjed-Daghi, East Azerbaijan Province, Iran [Volume 10, Issue 4, 2019, Pages 883-901]

  • Hossaini, M. F. Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]

  • Hosseini, M. Effect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study) [Volume 10, Issue 1, 2019, Pages 257-270]

  • Hosseini, M. Effects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar [Volume 10, Issue 4, 2019, Pages 967-978]

I

  • Ifelola, O.E. Evaluation of background geochemical speciation of heavy metals in overburden topsoil of bituminous sand deposit area, Ondo state, Nigeria [Volume 10, Issue 4, 2019, Pages 869-882]

J

  • Jafari, H. Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]

  • Jafarpour, A. Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]

  • Jahani Chegeni, M. Combined DEM and SPH simulation of ball milling [Volume 10, Issue 1, 2019, Pages 151-161]

  • Jahankhah, H. A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]

  • Jalali, Seyed M. E. Airflow inside tunnel boring machine: A numerical study and an experimental verification [Volume 10, Issue 3, 2019, Pages 623-632]

  • Jiskani, I. M. Fault orientation modeling of Sonda- Jherruck coalfield, Pakistan [Volume 10, Issue 2, 2019, Pages 305-313]

K

  • Kadkhodaei, M. H. Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties [Volume 10, Issue 4, 2019, Pages 917-928]

  • Kakaie, R. Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]

  • Kamali, Gh.R. Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]

  • Kamkar Rouhani, A. Using a combination of genetic algorithm and particle swarm optimization algorithm for GEMTIP modeling of spectral-induced polarization data [Volume 10, Issue 2, 2019, Pages 493-505]

  • Kamkar Rouhani, A. Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]

  • Karamoozian, M. Modelling and optimization of digestion efficiency of bauxite in Bayer process: Iran Alumina company [Volume 10, Issue 3, 2019, Pages 799-809]

  • Karamouzian, M. Pre-treatment of toxic element and cationic dye onto natural biomass: characterization and optimization [Volume 10, Issue 3, 2019, Pages 649-658]

  • Karekal, Sh. DPM flow pattern of LHD in underground mines with different ventilation conditions [Volume 10, Issue 2, 2019, Pages 315-326]

  • Kargaran Bafghi, F. Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]

  • Karimi, P. A finite element model to simulate magnetic field distribution and laboratory studies in wet low-intensity magnetic separator [Volume 10, Issue 3, 2019, Pages 717-727]

  • Karrech, A. Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]

  • Khaleghi, M. Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]

  • Khalesi, M. R. Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]

  • Khaloo Kakaie, R. Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]

  • Khanchi, A. R. Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]

  • Khani, M. R. Modelling and optimization of digestion efficiency of bauxite in Bayer process: Iran Alumina company [Volume 10, Issue 3, 2019, Pages 799-809]

  • Khaphaje, E. Beneficiation of a low-grade iron ore by combination of wet low-intensity magnetic separation and reverse flotation methods [Volume 10, Issue 1, 2019, Pages 197-212]

  • Kheyrandish, I. A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]

  • Khodadadi Darban, A. Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]

  • Khodadadi Darban, A. Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]

  • Khodadadi Darban, A. A finite element model to simulate magnetic field distribution and laboratory studies in wet low-intensity magnetic separator [Volume 10, Issue 3, 2019, Pages 717-727]

  • Khodayari, A. R. Effect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study) [Volume 10, Issue 1, 2019, Pages 257-270]

  • Khorasani, E. Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]

  • Khoshjavan, S. Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]

  • Khosravi, M. H. A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]

  • Khosravi, M. H. Numerical analysis of slide-head-toppling failure [Volume 10, Issue 4, 2019, Pages 1001-1011]

  • Kianinia, Y. Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]

  • Kianpour, M. Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]

  • Kiyani, A.R. Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]

  • Kurdi, M. Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]

L

  • Lak, M. Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]

  • Lotfi, M. Fractal-wavelet-fusion-based re-ranking of joint roughness coefficients [Volume 10, Issue 4, 2019, Pages 1121-1133]

M

  • Madani, H. Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]

  • Maghsoudi, A. Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]

  • Maghsoudi, A. Geostatistical estimation to delineate oxide and sulfide zones using geophysical data; a case study of Chahar Bakhshi vein-type gold deposit, NE Iran [Volume 10, Issue 3, 2019, Pages 679-694]

  • Mahdiyanfar, H. Detection of Mo geochemical anomaly in depth using a new scenario based on spectrum–area fractal analysis [Volume 10, Issue 3, 2019, Pages 695-704]

  • Maleki Moghaddam, M. Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]

  • Mansouri, A. R. Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]

  • Mansourpour, Z. A finite element model to simulate magnetic field distribution and laboratory studies in wet low-intensity magnetic separator [Volume 10, Issue 3, 2019, Pages 717-727]

  • Masoumi, I. Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]

  • Memarian, H. A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]

  • Mijalkovski, S. Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]

  • Mikaeil, R. Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]

  • Mikaeil, R. Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process [Volume 10, Issue 3, 2019, Pages 559-574]

  • Mikaeil, R. Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]

  • Mikaeil, R. Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]

  • Mikaeil, R. Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]

  • Mirakovski, D. Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]

  • Mirzaie, M. Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]

  • Moarefvand, P. Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]

  • Moarefvand, P. Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]

  • Moarefvand, P. Geostatistical estimation to delineate oxide and sulfide zones using geophysical data; a case study of Chahar Bakhshi vein-type gold deposit, NE Iran [Volume 10, Issue 3, 2019, Pages 679-694]

  • Moarefvand, P. Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]

  • Moghadasi, M. Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]

  • Mohajer-Moghari, F. Pre-treatment of toxic element and cationic dye onto natural biomass: characterization and optimization [Volume 10, Issue 3, 2019, Pages 649-658]

  • Mohammadi, J. Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]

  • Mohammad Torab, F. Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]

  • Mohammad Torab, F. Ant colony algorithm as a high-performance method in resource estimation using LVA field; A case study: Choghart Iron ore deposit [Volume 10, Issue 3, 2019, Pages 667-678]

  • Moini, H. Ant colony algorithm as a high-performance method in resource estimation using LVA field; A case study: Choghart Iron ore deposit [Volume 10, Issue 3, 2019, Pages 667-678]

  • Mojarab, M. A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]

  • Mokhtari, H. Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines [Volume 10, Issue 4, 2019, Pages 903-916]

  • Mokhtari, M. Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]

  • Molayemat, H. Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]

  • Moosavirad, Seyed M. Copper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study [Volume 10, Issue 4, 2019, Pages 1013-1029]

  • Morla, R. DPM flow pattern of LHD in underground mines with different ventilation conditions [Volume 10, Issue 2, 2019, Pages 315-326]

  • Moshashaei, K. Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]

  • Moshrefi, S. New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]

  • Mousavi, M. Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]

  • Mousavi, Seyed S. A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]

  • Mozafari, A. Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]

N

  • Nazari, M. Airflow inside tunnel boring machine: A numerical study and an experimental verification [Volume 10, Issue 3, 2019, Pages 623-632]

  • Nejati Kalateh, A. Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]

  • Nezarat, H.R. Airflow inside tunnel boring machine: A numerical study and an experimental verification [Volume 10, Issue 3, 2019, Pages 623-632]

  • Nikkhah, M. A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]

  • Nikkhah, M. Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]

  • Nikoogoftar, H. Delineation of alteration zones based on artificial neural networks and concentration-volume fractal methods in the hypogene zone of porphyry copper-gold deposit, Masjed-Daghi, East Azerbaijan Province, Iran [Volume 10, Issue 4, 2019, Pages 883-901]

  • Nikoogoftar Safa, H. Application of fractal modeling to delineate alteration zones and lithological units in Masjed-Daghi Cu-Au porphyry deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 339-356]

  • Noaparast, M. Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]

  • Noori, M. Use of density tracers in evaluating performance of Tri-Flo circuits Case study: Tabas (Iran) coal preparation plant [Volume 10, Issue 2, 2019, Pages 441-450]

  • Nouri Qarahasanlou, A. Analysis of reliability and maintainability for multiple repairable units (Case study: Sungun copper mine) [Volume 10, Issue 4, 2019, Pages 1045-1059]

O

  • Ozcelik, Y. Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]

P

  • Parhizkar, A. Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]

  • Parsapour, Gh.A. Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]

  • Pourghahramani, P. Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]

  • Pourghahramani, P. Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]

R

  • Radmehr, V. Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]

  • Rahimipour, Gh. R. Anomaly delineation of porphyry copper deposits of Hanza Region through geochemical data analyses and multispectral remote sensing [Volume 10, Issue 3, 2019, Pages 747-762]

  • Ramazi, H. R. A programming method to estimate proximate parameters of coal beds from well-logging data using a sequential solving of linear equation systems [Volume 10, Issue 3, 2019, Pages 633-647]

  • Ramezanzadeh, A. New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]

  • Ranjbar, Gh. H Effect of segmental joint stiffness on tunnel lining internal forces under static conditions [Volume 10, Issue 4, 2019, Pages 1031-1043]

  • Ranjbar, H. Anomaly delineation of porphyry copper deposits of Hanza Region through geochemical data analyses and multispectral remote sensing [Volume 10, Issue 3, 2019, Pages 747-762]

  • Rasouli, V. Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]

  • Razi, E. Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]

  • Razzaghzadeh, R. Analysis of reliability and maintainability for multiple repairable units (Case study: Sungun copper mine) [Volume 10, Issue 4, 2019, Pages 1045-1059]

  • Rezaei, A. Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]

  • Rezaei, Z. Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]

  • Rezai, B. Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]

  • Rezai, B. X-Ray mapping and the mineralogy pattern of nickel laterite ore: Bavanat, Fars, Iran [Volume 10, Issue 3, 2019, Pages 811-820]

  • Rezaie, M. Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]

S

  • Saghafiyazdi, M. Effects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar [Volume 10, Issue 4, 2019, Pages 967-978]

  • Sajid, M. J. Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]

  • Salarian, S. Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]

  • Samadi, M. Metal(loid) uptake of Sonchus oleraceus grown around Cheshmeh-Konan copper deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 517-528]

  • Saneie, M. Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]

  • Sarfaraz, H. Numerical analysis of slide-head-toppling failure [Volume 10, Issue 4, 2019, Pages 1001-1011]

  • Seifpanahi Shabani, K. Pre-treatment of toxic element and cationic dye onto natural biomass: characterization and optimization [Volume 10, Issue 3, 2019, Pages 649-658]

  • Sereshki, F. Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process [Volume 10, Issue 3, 2019, Pages 559-574]

  • Shadi Naghadeh, H. Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]

  • Shafaei, Seyed Z. Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]

  • Shaffiee Haghshenas, S. Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]

  • Shaffiee Haghshenas, S. Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]

  • Shaffiee Haghshenas, S. Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]

  • Shaffiee Haghshenas, S. Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]

  • Shafiei Ganjeh, R. A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]

  • Shahani, N. Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]

  • Shahriar, K. New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]

  • Shahriar, K. Effect of segmental joint stiffness on tunnel lining internal forces under static conditions [Volume 10, Issue 4, 2019, Pages 1031-1043]

  • Shahsavani, H. Processing a multifold ground penetration radar data using common-diffraction-surface stack method [Volume 10, Issue 3, 2019, Pages 777-785]

  • Shakoor Shahabi, R. Analysis of reliability and maintainability for multiple repairable units (Case study: Sungun copper mine) [Volume 10, Issue 4, 2019, Pages 1045-1059]

  • Sharifi, F. Using a combination of genetic algorithm and particle swarm optimization algorithm for GEMTIP modeling of spectral-induced polarization data [Volume 10, Issue 2, 2019, Pages 493-505]

  • Shokouh Saljoughi, B. Identification of geochemical anomalies associated with Cu mineralization by applying spectrum-area multi-fractal and wavelet neural network methods in Shahr-e-Babak mining area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 49-73]

  • Siddiqui, F. I. Fault orientation modeling of Sonda- Jherruck coalfield, Pakistan [Volume 10, Issue 2, 2019, Pages 305-313]

  • Sikakwe, G.U Evaluation of stream sediment contamination by potentially toxic elements around mining and farming areas (SE Nigeria) [Volume 10, Issue 4, 2019, Pages 833-851]

  • Sohrabian, B. Fuzzy tonnage-average grade model based on extension principle [Volume 10, Issue 3, 2019, Pages 659-666]

  • Soltani, A. Fuzzy tonnage-average grade model based on extension principle [Volume 10, Issue 3, 2019, Pages 659-666]

  • Soltani, F. Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]

  • Soltani-Mohammadi, S. Fuzzy tonnage-average grade model based on extension principle [Volume 10, Issue 3, 2019, Pages 659-666]

T

  • Tabasi, S. Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]

  • Taghizadeh, M. Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]

  • Taji, M. Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process [Volume 10, Issue 3, 2019, Pages 559-574]

  • Taji, M. Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]

  • Talkhablou, M. Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]

  • Tamartash, R. Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]

  • Tokhmechi, B. A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]

  • Tokhmechi, B. Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]

  • Tokhmechi, B. Fractal-wavelet-fusion-based re-ranking of joint roughness coefficients [Volume 10, Issue 4, 2019, Pages 1121-1133]

  • Torbati, S. Metal(loid) uptake of Sonchus oleraceus grown around Cheshmeh-Konan copper deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 517-528]

U

  • Unesi, M. Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]

Y

  • Yarahamdi Bafghi, A.R. Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]

  • Yusefi, A. A programming method to estimate proximate parameters of coal beds from well-logging data using a sequential solving of linear equation systems [Volume 10, Issue 3, 2019, Pages 633-647]

  • Yusefi, M. Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]

Z

  • Zandy Ilghani, N. Bayesian prediction of rotational torque to operate horizontal drilling [Volume 10, Issue 2, 2019, Pages 507-515]

  • Zare, Sh. A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]