A

  • Aali Anvari, Ali Financial Risk Management Prediction of Mining and Industrial Projects using Combination of Artificial Intelligence and Simulation Methods [Volume 13, Issue 4, 2022, Pages 1211-1223]

  • Abbas, Kamran Selection of Appropriate Probability Distributions for Rock Analysis using Laser-induced Breakdown Spectroscopy [Volume 13, Issue 4, 2022, Pages 997-1013]

  • Abbasi Azghan, Roozbeh Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]

  • Abdollahipour, A. Cavity Growth in Underground Coal Gasification Method by Considering Cleat Length and Inclination of Coal with Elasto-Brittle Behavior [Volume 13, Issue 2, 2022, Pages 607-625]

  • Abdollahipour, Abolfazl Simulation of Crack Propagation Mechanism in Porous Media using Modified linear Element Displacement Discontinuity Method [Volume 13, Issue 3, 2022, Pages 903-927]

  • Abdullah, Rini Asnida 3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]

  • Abu El Ghar, M. Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]

  • Adeel, Muhammad Bilal Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]

  • Adib, A. Delineation of Iron Alteration Zones using Spectrum-Area Fractal Model and TOPSIS Decision-Making Method in Tarom Metallogenic Zone, NW Iran [Volume 13, Issue 2, 2022, Pages 503-525]

  • Afzal, P. Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]

  • Afzal, P. Delineation of Iron Alteration Zones using Spectrum-Area Fractal Model and TOPSIS Decision-Making Method in Tarom Metallogenic Zone, NW Iran [Volume 13, Issue 2, 2022, Pages 503-525]

  • Afzal, Peyman Compressional and Shear Interval Velocity Modeling to Determine Formation Pressures in an Oilfield of SW Iran [Volume 13, Issue 3, 2022, Pages 851-873]

  • Agah, Azadeh 2D Simulation of Dynamic Transportation of Volatile Hydrocarbons in Vadose Zone of Tehran Oil Refinery and Industrial area of Ray, Tehran, Iran [Volume 13, Issue 3, 2022, Pages 809-820]

  • Aghajani Bazzazi, Abbas Financial Risk Management Prediction of Mining and Industrial Projects using Combination of Artificial Intelligence and Simulation Methods [Volume 13, Issue 4, 2022, Pages 1211-1223]

  • Ahangari, Kaveh An Investigation into Bench Health Monitoring under Blast Loading in Hoek-Brown Failure Criterion using Finite Difference Method [Volume 13, Issue 3, 2022, Pages 875-889]

  • Ahmed, Nasar Male Selection of Appropriate Probability Distributions for Rock Analysis using Laser-induced Breakdown Spectroscopy [Volume 13, Issue 4, 2022, Pages 997-1013]

  • Alamdari, S. Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]

  • Alavi, D. Mechanism of Zinc Complexation by Alkaline Ligands: A Molecular Modelling Study [Volume 13, Issue 2, 2022, Pages 421-430]

  • Alavi, Iraj A New Technical and Economic Approach to Aptimal Plant Species Selection for Open-pit Mine Reclamation Process [Volume 13, Issue 4, 2022, Pages 1091-1105]

  • Ali, Muhammad The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]

  • Ali, Wahid The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]

  • Ali, Wahid 3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]

  • Ali, Wahid Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]

  • Alipenhani, B. Determination of Caving Hydraulic Radius of Rock Mass in Block Caving Method using Numerical Modeling and Multivariate Regression [Volume 13, Issue 1, 2022, Pages 217-233]

  • Alipenhani, B. Cavability Assessment of Rock Mass in Block Caving Mining Method based on Numerical Simulation and Response Surface Methodology [Volume 13, Issue 2, 2022, Pages 579-606]

  • Aliyari, F. Application of Fuzzy Gamma Operator to Generate Mineral Prospectivity Mapping for Cu-Mo Porphyry Deposits (Case Study: Kighal-Bourmolk Area, Northwestern Iran) [Volume 13, Issue 1, 2022, Pages 129-153]

  • Ameri Shahrabi, M. J. A New 3D Model for Shear Wave Velocity by Utilizing Conventional Petrophysical Logs and Geostatistical Method [Volume 13, Issue 2, 2022, Pages 431-447]

  • Amini, M. S. Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]

  • Amini Khoshalan, H. Developing New Models for Flyrock Distance Assessment in Open-Pit Mines [Volume 13, Issue 2, 2022, Pages 375-389]

  • Amiri Hossaini, M. Estimation of In-Situ Block Size Distribution in Jointed Rock Masses using Combined Photogrammetry and Discrete Fracture Network [Volume 13, Issue 1, 2022, Pages 175-184]

  • Amirkhani Shiraz, F. Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]

  • Arab Amiri, Alireza Forward Modeling of Frequency-domain Helicopter-borne Electromagnetic Data using an Improved Finite Difference Method [Volume 13, Issue 4, 2022, Pages 1067-1089]

  • Arefnia, Ali Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]

  • Arian, M. A. Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]

  • Ariffin, Kamar shah bin Evaluating Microscale Failure Response of Various Weathering Grade Sandstones Based on Micro-Scale Observation and Micro-Structural Modelling Subjected to Wet and Dry Cycles [Volume 13, Issue 2, 2022, Pages 341-355]

  • Aryafar, A. Cadmium Oxide Nanoparticles as A Novel Photo-Catalyst for Degradation of Ciprofloxacin Antibiotic in Aqueous Media [Volume 13, Issue 1, 2022, Pages 155-164]

  • Asgari, K. Influence of Single Tunnel and Twin Tunnel on Collapse Pattern and Maximum Ground Movement [Volume 13, Issue 1, 2022, Pages 117-128]

  • Asgari, K. Interaction between One Internal Hole and Two Neighboring Joints under Uniaxial Compression using an Experimental Test and a Numerical Simulation [Volume 13, Issue 2, 2022, Pages 407-420]

  • Ashoogh, Masoud Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]

  • Ataee-pour, M. CFD Modeling of Impact of Gas Content Uncertainty on Methane Distribution in Underground Coal Mine Roadways [Volume 13, Issue 2, 2022, Pages 493-502]

  • Ataei, M. Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]

  • Ayad, Abderrahim Economic impact of derangements on mining process – Case study: Sidi Chennane [Volume 13, Issue 4, 2022, Pages 989-996]

  • Azinfar, Mohamad Javad 2D Simulation of Dynamic Transportation of Volatile Hydrocarbons in Vadose Zone of Tehran Oil Refinery and Industrial area of Ray, Tehran, Iran [Volume 13, Issue 3, 2022, Pages 809-820]

B

  • Badri, M. Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]

  • Bagheri, Fereshteh PFC Simulation of Brazilian Tensile Strength Test in Geomaterials’ Specimens with T-shaped Non-persistent Joints [Volume 13, Issue 4, 2022, Pages 1189-1209]

  • Bahaaddini, M. Estimation of In-Situ Block Size Distribution in Jointed Rock Masses using Combined Photogrammetry and Discrete Fracture Network [Volume 13, Issue 1, 2022, Pages 175-184]

  • Bahaaddini, M. Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]

  • Bahrami, A.R. Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods [Volume 13, Issue 1, 2022, Pages 269-280]

  • Bakhshandeh Amnieh, H. Determination of Caving Hydraulic Radius of Rock Mass in Block Caving Method using Numerical Modeling and Multivariate Regression [Volume 13, Issue 1, 2022, Pages 217-233]

  • Bakhshandeh Amnieh, H. Cavability Assessment of Rock Mass in Block Caving Mining Method based on Numerical Simulation and Response Surface Methodology [Volume 13, Issue 2, 2022, Pages 579-606]

  • Bakkali, Saad Economic impact of derangements on mining process – Case study: Sidi Chennane [Volume 13, Issue 4, 2022, Pages 989-996]

  • Bansal, Vijay Kumar Spatial Prediction of Landslide Hazard using GIS-multi-criteria Decision Analysis in Kullu District of Himachal Pradesh, India [Volume 13, Issue 4, 2022, Pages 943-956]

  • Bascompta, M. Developing New Models for Flyrock Distance Assessment in Open-Pit Mines [Volume 13, Issue 2, 2022, Pages 375-389]

  • Bascompta, M. Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]

  • Basiri, M.H. Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]

  • Başpınar Tuncay, E. A Probability-Based Evaluation on Andesites for Their Use as Cladding Stone [Volume 13, Issue 1, 2022, Pages 1-13]

  • Benzakour, I. Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]

  • Bhagat, Monu A Deep Neural Network for Classification of Land Use Satellite Datasets in Mining Environments [Volume 13, Issue 3, 2022, Pages 797-808]

  • Boussetta, A. Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]

  • Burdeina, Nataliia Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]

C

  • Careddu, N. Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]

  • Careddu, Nicola An Experimental-Intelligent Method to Predict Noise Value of Drilling in Dimension Stone Industry [Volume 13, Issue 3, 2022, Pages 693-713]

D

  • Dachri, K. Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]

  • Dadkhah Tehrani, Ali Design, Manufacture, and Perform of First Electronic Seismic Sensor Dilatometer in Project of Tehran Metro line 6 as a Rapid Environmentally Friendly in-situ Test with Less Soil Disturbance [Volume 13, Issue 4, 2022, Pages 1107-1118]

  • Darvishi, Mohammad Amin Alumina Extraction by Lime-soda Sinter Process from Low-grade Bauxite Soil of Semirom Mine [Volume 13, Issue 4, 2022, Pages 1159-1169]

  • Dehghani, H. Developing New Models for Flyrock Distance Assessment in Open-Pit Mines [Volume 13, Issue 2, 2022, Pages 375-389]

  • Dehghani, H. Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]

  • Dehghani Firoozabadi, Mohammadhosein Simulation of Crack Propagation Mechanism in Porous Media using Modified linear Element Displacement Discontinuity Method [Volume 13, Issue 3, 2022, Pages 903-927]

  • Diab, M. Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]

  • Dolatshahi, A.R. Effect of Acid Rain on Physical and Mechanical Properties of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 1, 2022, Pages 185-200]

  • Doneva, Nikolinka Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]

  • Doulati Ardejani, F. Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]

  • Doulati Ardejani, Faramarz 2D Simulation of Dynamic Transportation of Volatile Hydrocarbons in Vadose Zone of Tehran Oil Refinery and Industrial area of Ray, Tehran, Iran [Volume 13, Issue 3, 2022, Pages 809-820]

  • Doulati Ardejani, Sh. Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]

E

  • Ebrahimabadi, Arash A New Technical and Economic Approach to Aptimal Plant Species Selection for Open-pit Mine Reclamation Process [Volume 13, Issue 4, 2022, Pages 1091-1105]

  • El Amari, Kh. Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]

  • Emami Meybodi, E. Application of Machine Learning Models for Predicting Rock Fracture Toughness Mode-I and Mode-II [Volume 13, Issue 2, 2022, Pages 465-480]

  • Entezam, Sh. Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]

  • Esmaeilzadeh, A. Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]

  • Esmaeilzadeh, Akbar Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]

  • Esmailzadeh, M. Application of Fuzzy Gamma Operator to Generate Mineral Prospectivity Mapping for Cu-Mo Porphyry Deposits (Case Study: Kighal-Bourmolk Area, Northwestern Iran) [Volume 13, Issue 1, 2022, Pages 129-153]

F

  • Fakhri, D. Effect of Glass and Polypropylene Hybrid Fibers on Mode I, Mode II, and Mixed-Mode Fracture Toughness of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 2, 2022, Pages 559-577]

  • Faqir, H. Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]

  • Fatehi Marji, M. Application of Machine Learning Models for Predicting Rock Fracture Toughness Mode-I and Mode-II [Volume 13, Issue 2, 2022, Pages 465-480]

  • Fatehi Marji, M. Cavity Growth in Underground Coal Gasification Method by Considering Cleat Length and Inclination of Coal with Elasto-Brittle Behavior [Volume 13, Issue 2, 2022, Pages 607-625]

  • Fatehi Marji, Mohammad Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]

  • Fatehi Marji, Mohammad Simulation of Crack Propagation Mechanism in Porous Media using Modified linear Element Displacement Discontinuity Method [Volume 13, Issue 3, 2022, Pages 903-927]

  • Fatehi Marji, Mohammad PFC Simulation of Brazilian Tensile Strength Test in Geomaterials’ Specimens with T-shaped Non-persistent Joints [Volume 13, Issue 4, 2022, Pages 1189-1209]

  • Fattahi, H. Reliability Analysis of Surface Settlement caused by Mechanized Tunneling-a Case Study [Volume 13, Issue 1, 2022, Pages 201-216]

  • Fawzy, M. Mohamed Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]

  • Feroze, Navid Selection of Appropriate Probability Distributions for Rock Analysis using Laser-induced Breakdown Spectroscopy [Volume 13, Issue 4, 2022, Pages 997-1013]

  • Fu, Jinwei Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]

G

  • Ghaedi Ghalini, M. Estimation of In-Situ Block Size Distribution in Jointed Rock Masses using Combined Photogrammetry and Discrete Fracture Network [Volume 13, Issue 1, 2022, Pages 175-184]

  • Ghaemmaghami, Elahe Alumina Extraction by Lime-soda Sinter Process from Low-grade Bauxite Soil of Semirom Mine [Volume 13, Issue 4, 2022, Pages 1159-1169]

  • Ghasemi, Sina Role of Functional Groups in Selective Adsorption of Gold over Copper Cyano complexes by Activated Carbon: A DFT Study [Volume 13, Issue 3, 2022, Pages 891-901]

  • Gholinejad, M. Delineation of Iron Alteration Zones using Spectrum-Area Fractal Model and TOPSIS Decision-Making Method in Tarom Metallogenic Zone, NW Iran [Volume 13, Issue 2, 2022, Pages 503-525]

  • Glyva, Valentyn Anatolyovich Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]

  • Golomeov, Blagoj Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]

  • Golomeova, Mirjana Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]

  • Goshtasbi, Kamran An Investigation into Bench Health Monitoring under Blast Loading in Hoek-Brown Failure Criterion using Finite Difference Method [Volume 13, Issue 3, 2022, Pages 875-889]

  • Guido, Giuseppe Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]

  • Gupta, Aditya A Deep Neural Network for Classification of Land Use Satellite Datasets in Mining Environments [Volume 13, Issue 3, 2022, Pages 797-808]

H

  • Hadzi-Nikolova, Marija Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]

  • Haeri, Hadi Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]

  • Haeri, Hadi PFC Simulation of Brazilian Tensile Strength Test in Geomaterials’ Specimens with T-shaped Non-persistent Joints [Volume 13, Issue 4, 2022, Pages 1189-1209]

  • Hamidian, Hadi A New Technical and Economic Approach to Aptimal Plant Species Selection for Open-pit Mine Reclamation Process [Volume 13, Issue 4, 2022, Pages 1091-1105]

  • Han, Un Chol Suitable Mining Method Selection using HFGDM-TOPSIS Method: a Case Study of an Apatite Mine [Volume 13, Issue 2, 2022, Pages 357-374]

  • Hasani, M. Selective Recovery of Pt, Pd, and Rh from Spent Catalysts by Functionalized Magnetite Nanoparticles [Volume 13, Issue 2, 2022, Pages 481-491]

  • Hashemolhosseini, Hamid An Experimental-Intelligent Method to Predict Noise Value of Drilling in Dimension Stone Industry [Volume 13, Issue 3, 2022, Pages 693-713]

  • Hayati, Erfan Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]

  • Hebblewhite, B. Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]

  • Hibti, M. Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]

  • Honarmand, M. Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]

  • Honarmand, M. Cadmium Oxide Nanoparticles as A Novel Photo-Catalyst for Degradation of Ciprofloxacin Antibiotic in Aqueous Media [Volume 13, Issue 1, 2022, Pages 155-164]

  • Hosseini, M. Effect of Acid Rain on Physical and Mechanical Properties of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 1, 2022, Pages 185-200]

  • Hosseini, M. CFD-based Modeling of Sarin Gas Dispersion in a Subway Station–A Hypothetical Scenario [Volume 13, Issue 1, 2022, Pages 235-251]

  • Hosseini, M. Effect of Glass and Polypropylene Hybrid Fibers on Mode I, Mode II, and Mixed-Mode Fracture Toughness of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 2, 2022, Pages 559-577]

  • Hosseini, Seyed Aliakbar Compressional and Shear Interval Velocity Modeling to Determine Formation Pressures in an Oilfield of SW Iran [Volume 13, Issue 3, 2022, Pages 851-873]

  • Hussain, Syed Kh. Application of Machine Learning Models for Predicting Rock Fracture Toughness Mode-I and Mode-II [Volume 13, Issue 2, 2022, Pages 465-480]

I

  • Imamalipour, A. Application of Fuzzy Gamma Operator to Generate Mineral Prospectivity Mapping for Cu-Mo Porphyry Deposits (Case Study: Kighal-Bourmolk Area, Northwestern Iran) [Volume 13, Issue 1, 2022, Pages 129-153]

  • Imam Ali Pour, A. Estimation of Pb and Zn Elements using Adaptive Neuro-Fuzzy Inference System (Case study: Gerde Kooh area, north of Yazd) [Volume 13, Issue 2, 2022, Pages 449-464]

  • Islam, Amber 3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]

J

  • Jafari, M.R. Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]

  • Jafarpour, Amir Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]

  • Jahani Chegeni, Mohammad Bio-flotation of Chalcopyrite using Halophilic Bacteria Separately and Their Combination as Pyrite bio-Depressant [Volume 13, Issue 4, 2022, Pages 1119-1138]

  • Jiryaee, F. Reliability Analysis of Surface Settlement caused by Mechanized Tunneling-a Case Study [Volume 13, Issue 1, 2022, Pages 201-216]

  • Jodeiri Shokri, B. Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]

  • Jodeiri Shokri, B. Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]

  • Junaid, Muhammad The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]

  • Junaid, Muhammad 3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]

  • Junaid, Muhammad Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]

  • Juneja, Gaurav Numerical Analysis of Square and Circular Skirted Footings Placed on Sand using PLAXIS 3D Software [Volume 13, Issue 4, 2022, Pages 1049-1066]

K

  • Kamkar Rouhani, Abolghasem Forward Modeling of Frequency-domain Helicopter-borne Electromagnetic Data using an Improved Finite Difference Method [Volume 13, Issue 4, 2022, Pages 1067-1089]

  • Kamran, Muhammad The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]

  • Karami, Morteza Real-Scale Numerical Analyzing Dynamic Process of TBM Boring in Jointed Rock; a Case Study: Kerman Water Conveyance Tunnel in Iran [Volume 13, Issue 3, 2022, Pages 643-666]

  • Karimi Gogheri, Valiallah Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]

  • Keshavazr Faraj Khah, Nasser Compressional and Shear Interval Velocity Modeling to Determine Formation Pressures in an Oilfield of SW Iran [Volume 13, Issue 3, 2022, Pages 851-873]

  • Khalesi, Mohammad Reza Role of Functional Groups in Selective Adsorption of Gold over Copper Cyano complexes by Activated Carbon: A DFT Study [Volume 13, Issue 3, 2022, Pages 891-901]

  • Khan, Naseer Muhammad The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]

  • Khan, Naseer Muhammad Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]

  • Khoshdast, H. Adsorptive Study of Cadmium Removal from Aqueous Solution Using a Coal Waste Loaded with Fe3O4 Nanoparticles [Volume 13, Issue 2, 2022, Pages 527-545]

  • Khosravi, M. H. Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]

  • Kianoush, Pooria Compressional and Shear Interval Velocity Modeling to Determine Formation Pressures in an Oilfield of SW Iran [Volume 13, Issue 3, 2022, Pages 851-873]

  • Kim, Dong Il Suitable Mining Method Selection using HFGDM-TOPSIS Method: a Case Study of an Apatite Mine [Volume 13, Issue 2, 2022, Pages 357-374]

  • Koken, E. A Probability-Based Evaluation on Andesites for Their Use as Cladding Stone [Volume 13, Issue 1, 2022, Pages 1-13]

  • Koleini, Seyed M. J. Mechanism of Zinc Complexation by Alkaline Ligands: A Molecular Modelling Study [Volume 13, Issue 2, 2022, Pages 421-430]

  • Kumar, Ajay A Deep Neural Network for Classification of Land Use Satellite Datasets in Mining Environments [Volume 13, Issue 3, 2022, Pages 797-808]

  • Kumar, Akhilesh Spatial Prediction of Landslide Hazard using GIS-multi-criteria Decision Analysis in Kullu District of Himachal Pradesh, India [Volume 13, Issue 4, 2022, Pages 943-956]

  • Kumar, Pardeep Site Response Analysis and Empirical Correlations between N-Values and Shear Modulus for Sub-Himalayan District Hamirpur using ProShake [Volume 13, Issue 4, 2022, Pages 1031-1047]

M

  • Madani, H. CFD-based Modeling of Sarin Gas Dispersion in a Subway Station–A Hypothetical Scenario [Volume 13, Issue 1, 2022, Pages 235-251]

  • Madani, H. CFD Modeling of Impact of Gas Content Uncertainty on Methane Distribution in Underground Coal Mine Roadways [Volume 13, Issue 2, 2022, Pages 493-502]

  • Madani, Nasser Anisotropic Inverse Distance Weighting Method: An Innovative Technique for Resource Modeling of Vein-type Deposits [Volume 13, Issue 4, 2022, Pages 957-972]

  • Maghsoudy, S. Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]

  • Mahdikhani, M. Effect of Glass and Polypropylene Hybrid Fibers on Mode I, Mode II, and Mixed-Mode Fracture Toughness of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 2, 2022, Pages 559-577]

  • Mahdiyanfar, Hossein Fractal Modeling of Geochemical Mineralization Prospectivity Index based on Centered Log-Ratio Transformed Data for Geochemical Targeting: a Case Study of Cu Porphyry Mineralization [Volume 13, Issue 3, 2022, Pages 821-838]

  • Mahjoore, M. Cadmium Oxide Nanoparticles as A Novel Photo-Catalyst for Degradation of Ciprofloxacin Antibiotic in Aqueous Media [Volume 13, Issue 1, 2022, Pages 155-164]

  • Majdi, A. Determination of Caving Hydraulic Radius of Rock Mass in Block Caving Method using Numerical Modeling and Multivariate Regression [Volume 13, Issue 1, 2022, Pages 217-233]

  • Majdi, A. Determining Probability Distribution Functions of Rock Joint Geometric Properties [Volume 13, Issue 1, 2022, Pages 281-308]

  • Majdi, A. Cavability Assessment of Rock Mass in Block Caving Mining Method based on Numerical Simulation and Response Surface Methodology [Volume 13, Issue 2, 2022, Pages 579-606]

  • Malakoutikhah, Mahdi Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]

  • Maleki, Sh. A New 3D Model for Shear Wave Velocity by Utilizing Conventional Petrophysical Logs and Geostatistical Method [Volume 13, Issue 2, 2022, Pages 431-447]

  • Manafi, Zahra Bio-flotation of Chalcopyrite using Halophilic Bacteria Separately and Their Combination as Pyrite bio-Depressant [Volume 13, Issue 4, 2022, Pages 1119-1138]

  • Mikaeil, R. Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]

  • Mikaeil, Reza Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]

  • Mikaeil, Reza An Experimental-Intelligent Method to Predict Noise Value of Drilling in Dimension Stone Industry [Volume 13, Issue 3, 2022, Pages 693-713]

  • Mirakovski, Dejan Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]

  • Mirsepahvand, F. Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]

  • Mirshrkari, S. Adsorptive Study of Cadmium Removal from Aqueous Solution Using a Coal Waste Loaded with Fe3O4 Nanoparticles [Volume 13, Issue 2, 2022, Pages 527-545]

  • Mirzaei, S. Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]

  • Mirzaeian, Yousef Simulation of Crack Propagation Mechanism in Porous Media using Modified linear Element Displacement Discontinuity Method [Volume 13, Issue 3, 2022, Pages 903-927]

  • Mirzamohammadi, Hosein Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]

  • Moeini, A. The Effect of Operating Parameters on Bromine Extraction from Desalination Plant Discharge [Volume 13, Issue 1, 2022, Pages 165-174]

  • Moghooeinejad, Ahmad Bio-flotation of Chalcopyrite using Halophilic Bacteria Separately and Their Combination as Pyrite bio-Depressant [Volume 13, Issue 4, 2022, Pages 1119-1138]

  • Mohamadi Bolban Abad, Sh. Interaction between One Internal Hole and Two Neighboring Joints under Uniaxial Compression using an Experimental Test and a Numerical Simulation [Volume 13, Issue 2, 2022, Pages 407-420]

  • Mohamed El Shafey, A. H. Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]

  • Mohamed Gaafar, I. Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]

  • Mohammadi, Ghodratollah Compressional and Shear Interval Velocity Modeling to Determine Formation Pressures in an Oilfield of SW Iran [Volume 13, Issue 3, 2022, Pages 851-873]

  • Mohammadi, Seyed Davoud Preparation of Heterogeneous Rock-Like Samples Containing Non-Persistent Notch; Different Layout [Volume 13, Issue 4, 2022, Pages 1139-1157]

  • Mohammadi, Seyed Davoud Financial Risk Management Prediction of Mining and Industrial Projects using Combination of Artificial Intelligence and Simulation Methods [Volume 13, Issue 4, 2022, Pages 1211-1223]

  • Mohammadnejad, S. The Effect of Operating Parameters on Bromine Extraction from Desalination Plant Discharge [Volume 13, Issue 1, 2022, Pages 165-174]

  • Mohammadnejad, S. Mechanism of Zinc Complexation by Alkaline Ligands: A Molecular Modelling Study [Volume 13, Issue 2, 2022, Pages 421-430]

  • Mohammadnejad, Sima Role of Functional Groups in Selective Adsorption of Gold over Copper Cyano complexes by Activated Carbon: A DFT Study [Volume 13, Issue 3, 2022, Pages 891-901]

  • Mohd Hashim, Mohd Hazizan bin Evaluating Microscale Failure Response of Various Weathering Grade Sandstones Based on Micro-Scale Observation and Micro-Structural Modelling Subjected to Wet and Dry Cycles [Volume 13, Issue 2, 2022, Pages 341-355]

  • Mohd Hashim, Mohd Hazizan bin The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]

  • Mohd Hashim, Mohd Hazizan bin Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]

  • Moradi, Sirvan Financial Risk Management Prediction of Mining and Industrial Projects using Combination of Artificial Intelligence and Simulation Methods [Volume 13, Issue 4, 2022, Pages 1211-1223]

  • Moradpouri, F. A Practical Comparison between Gaussian and Direct Sequential Simulation Algorithms using a 3D Porosity Dataset [Volume 13, Issue 2, 2022, Pages 547-557]

  • Mortezaie, Rahim Preparation of Heterogeneous Rock-Like Samples Containing Non-Persistent Notch; Different Layout [Volume 13, Issue 4, 2022, Pages 1139-1157]

  • Mousavi, A. Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]

  • Mousavi, Seyed Ahmad An Investigation into Bench Health Monitoring under Blast Loading in Hoek-Brown Failure Criterion using Finite Difference Method [Volume 13, Issue 3, 2022, Pages 875-889]

N

  • Najafi, Abbas Alumina Extraction by Lime-soda Sinter Process from Low-grade Bauxite Soil of Semirom Mine [Volume 13, Issue 4, 2022, Pages 1159-1169]

  • Najafi, M. Cavity Growth in Underground Coal Gasification Method by Considering Cleat Length and Inclination of Coal with Elasto-Brittle Behavior [Volume 13, Issue 2, 2022, Pages 607-625]

  • Naji, Kh. Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]

  • Nasrollahzadeh, Amirmohammad Bio-flotation of Chalcopyrite using Halophilic Bacteria Separately and Their Combination as Pyrite bio-Depressant [Volume 13, Issue 4, 2022, Pages 1119-1138]

  • Nawazish, Adeel Selection of Appropriate Probability Distributions for Rock Analysis using Laser-induced Breakdown Spectroscopy [Volume 13, Issue 4, 2022, Pages 997-1013]

  • Nazari, Saeed Forward Modeling of Frequency-domain Helicopter-borne Electromagnetic Data using an Improved Finite Difference Method [Volume 13, Issue 4, 2022, Pages 1067-1089]

  • Nehrii, Serhii Hryhorovych Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]

  • Nehrii, Tetiana Oleksandrivna Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]

  • Nezafat, Hamed Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]

  • Noaparast, Mohammad An Environmentally Friendly Method for Recovery of Metals from Cathode Material of Lithium-Ion Batteries using L-Glutamic, Malonic, and Ascorbic acid [Volume 13, Issue 4, 2022, Pages 1171-1188]

  • Nouar, K. Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]

O

  • Ongarbayev, Ilyas Anisotropic Inverse Distance Weighting Method: An Innovative Technique for Resource Modeling of Vein-type Deposits [Volume 13, Issue 4, 2022, Pages 957-972]

  • Onyelowe, K. Developing New Models for Flyrock Distance Assessment in Open-Pit Mines [Volume 13, Issue 2, 2022, Pages 375-389]

  • Osmanpour, Ava Financial Risk Management Prediction of Mining and Industrial Projects using Combination of Artificial Intelligence and Simulation Methods [Volume 13, Issue 4, 2022, Pages 1211-1223]

  • Ouzaouit, Kh. Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]

P

  • Pak, Myong Chun Suitable Mining Method Selection using HFGDM-TOPSIS Method: a Case Study of an Apatite Mine [Volume 13, Issue 2, 2022, Pages 357-374]

  • Piri, Mostafa An Experimental-Intelligent Method to Predict Noise Value of Drilling in Dimension Stone Industry [Volume 13, Issue 3, 2022, Pages 693-713]

  • Pourgholam, M. M. Delineation of Iron Alteration Zones using Spectrum-Area Fractal Model and TOPSIS Decision-Making Method in Tarom Metallogenic Zone, NW Iran [Volume 13, Issue 2, 2022, Pages 503-525]

R

  • Rabiei, Hadiseh Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method [Volume 13, Issue 4, 2022, Pages 1225-1237]

  • Rahbar, K. Delineation of Iron Alteration Zones using Spectrum-Area Fractal Model and TOPSIS Decision-Making Method in Tarom Metallogenic Zone, NW Iran [Volume 13, Issue 2, 2022, Pages 503-525]

  • Rahimi, Sh. CFD Modeling of Impact of Gas Content Uncertainty on Methane Distribution in Underground Coal Mine Roadways [Volume 13, Issue 2, 2022, Pages 493-502]

  • Rajaee, A. Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]

  • Ramazi, H. R. A New 3D Model for Shear Wave Velocity by Utilizing Conventional Petrophysical Logs and Geostatistical Method [Volume 13, Issue 2, 2022, Pages 431-447]

  • Ramezani, E. Effect of Acid Rain on Physical and Mechanical Properties of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 1, 2022, Pages 185-200]

  • Rasouli, V. Application of Machine Learning Models for Predicting Rock Fracture Toughness Mode-I and Mode-II [Volume 13, Issue 2, 2022, Pages 465-480]

  • Rehman, Hafeez Ur Evaluating Microscale Failure Response of Various Weathering Grade Sandstones Based on Micro-Scale Observation and Micro-Structural Modelling Subjected to Wet and Dry Cycles [Volume 13, Issue 2, 2022, Pages 341-355]

  • Rehman, Hafeezur The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]

  • Rehman, Hafeezur Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]

  • Rezaei, Sh. Estimation of Pb and Zn Elements using Adaptive Neuro-Fuzzy Inference System (Case study: Gerde Kooh area, north of Yazd) [Volume 13, Issue 2, 2022, Pages 449-464]

  • Rostami, Jamal Real-Scale Numerical Analyzing Dynamic Process of TBM Boring in Jointed Rock; a Case Study: Kerman Water Conveyance Tunnel in Iran [Volume 13, Issue 3, 2022, Pages 643-666]

  • Roy, Amrit Kumar Slope Stability Analysis and Preventive Actions for a Landslide Location along NH-05 in Himachal Pradesh, India [Volume 13, Issue 3, 2022, Pages 667-678]

  • Roy, Amrit Kumar Assessment of Slope Stability and Its Remedies in Palampur, Himachal Pradesh [Volume 13, Issue 3, 2022, Pages 767-780]

  • Roy, Amrit Kumar Formulation of a Bearing Capacity Equation for a Circular Footing with Vertical and Inclined Loads on Layered Sand [Volume 13, Issue 4, 2022, Pages 1015-1029]

S

  • Sa'ari, Radzuan 3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]

  • Saadat, Saeed Evaluating a Sediment Pollution using Contamination Indices and Risk Assessment in Mineralized Zones, Eastern Iran [Volume 13, Issue 4, 2022, Pages 1239-1253]

  • Sabeti, H. A Practical Comparison between Gaussian and Direct Sequential Simulation Algorithms using a 3D Porosity Dataset [Volume 13, Issue 2, 2022, Pages 547-557]

  • Sadati, Ali akbar Alumina Extraction by Lime-soda Sinter Process from Low-grade Bauxite Soil of Semirom Mine [Volume 13, Issue 4, 2022, Pages 1159-1169]

  • Safaei, Mohammad Reza Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]

  • Saffari, A. Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]

  • Salimi, Amir Fractal Modeling of Geochemical Mineralization Prospectivity Index based on Centered Log-Ratio Transformed Data for Geochemical Targeting: a Case Study of Cu Porphyry Mineralization [Volume 13, Issue 3, 2022, Pages 821-838]

  • Samadzadeh Yazdi, Mohamad Reza Alumina Extraction by Lime-soda Sinter Process from Low-grade Bauxite Soil of Semirom Mine [Volume 13, Issue 4, 2022, Pages 1159-1169]

  • Samani, R. Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods [Volume 13, Issue 1, 2022, Pages 269-280]

  • Sarfaraz, H. Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods [Volume 13, Issue 1, 2022, Pages 269-280]

  • Sarfarazi, V. Influence of Single Tunnel and Twin Tunnel on Collapse Pattern and Maximum Ground Movement [Volume 13, Issue 1, 2022, Pages 117-128]

  • Sarfarazi, V. Interaction between One Internal Hole and Two Neighboring Joints under Uniaxial Compression using an Experimental Test and a Numerical Simulation [Volume 13, Issue 2, 2022, Pages 407-420]

  • Sarfarazi, Vahab Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]

  • Sarfarazi, Vahab Preparation of Heterogeneous Rock-Like Samples Containing Non-Persistent Notch; Different Layout [Volume 13, Issue 4, 2022, Pages 1139-1157]

  • Sarfarazi, Vahab PFC Simulation of Brazilian Tensile Strength Test in Geomaterials’ Specimens with T-shaped Non-persistent Joints [Volume 13, Issue 4, 2022, Pages 1189-1209]

  • Sari, Mahmut 3D Modelling and Feasibility Assessment of Granite Deposit using 2D Electrical Resistivity Tomography, Borehole, and Unmanned Aerial Vehicle Survey [Volume 13, Issue 4, 2022, Pages 929-942]

  • Serati, M. Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]

  • Seyyed Alizadeh Ganji, Seyyed Mohammad Modeling, Optimizing, and Characterizing Elimination Process of Cyanide Ion from an Industrial Wastewater of Gold Mine by Caro’s Acid Method [Volume 13, Issue 3, 2022, Pages 839-849]

  • Shafaei, F. Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]

  • Shafaei Tonkaboni, Sied Ziaedin An Environmentally Friendly Method for Recovery of Metals from Cathode Material of Lithium-Ion Batteries using L-Glutamic, Malonic, and Ascorbic acid [Volume 13, Issue 4, 2022, Pages 1171-1188]

  • Shafayi, Shah H. Ore Deposit Boundary Modification in Afghanistan Aynak Central Copper Deposit using Sequential Indicator Simulation and Indicator Kriging [Volume 13, Issue 2, 2022, Pages 325-340]

  • Shaffiee Haghshenas, S. Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]

  • Shaffiee Haghshenas, Sina Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]

  • Shaffiee Haghshenas, Sina An Experimental-Intelligent Method to Predict Noise Value of Drilling in Dimension Stone Industry [Volume 13, Issue 3, 2022, Pages 693-713]

  • Shah, Ahmad Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]

  • Shah, Kausar Sultan Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]

  • Shah, Kausar sultan The Finite Difference Analysis of Empirical Tunnel Support Design in High Stress fractured rock mass Environment at the Bunji Hydropower Project, Pakistan [Volume 13, Issue 3, 2022, Pages 781-795]

  • Shahbazi, M.R. Cavity Growth in Underground Coal Gasification Method by Considering Cleat Length and Inclination of Coal with Elasto-Brittle Behavior [Volume 13, Issue 2, 2022, Pages 607-625]

  • Shahhosseini, M. Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]

  • Shahriar, K. CFD-based Modeling of Sarin Gas Dispersion in a Subway Station–A Hypothetical Scenario [Volume 13, Issue 1, 2022, Pages 235-251]

  • Shahriari, H. Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]

  • Shakeri, J. Developing New Models for Flyrock Distance Assessment in Open-Pit Mines [Volume 13, Issue 2, 2022, Pages 375-389]

  • Shamsi, R. Prediction of Fly-rock using Gene Expression Programming and Teaching–learning-based Optimization Algorithm [Volume 13, Issue 2, 2022, Pages 391-406]

  • Sharifi, Fereydoun Forward Modeling of Frequency-domain Helicopter-borne Electromagnetic Data using an Improved Finite Difference Method [Volume 13, Issue 4, 2022, Pages 1067-1089]

  • Sharma, Ravi Kumar Spatial Prediction of Landslide Hazard using GIS-multi-criteria Decision Analysis in Kullu District of Himachal Pradesh, India [Volume 13, Issue 4, 2022, Pages 943-956]

  • Sharma, Ravi Kumar Site Response Analysis and Empirical Correlations between N-Values and Shear Modulus for Sub-Himalayan District Hamirpur using ProShake [Volume 13, Issue 4, 2022, Pages 1031-1047]

  • Sharma, Ravi Kumar Numerical Analysis of Square and Circular Skirted Footings Placed on Sand using PLAXIS 3D Software [Volume 13, Issue 4, 2022, Pages 1049-1066]

  • Sharma, Vivek Site Response Analysis and Empirical Correlations between N-Values and Shear Modulus for Sub-Himalayan District Hamirpur using ProShake [Volume 13, Issue 4, 2022, Pages 1031-1047]

  • Shirani Faradonbeh, Roohollah Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]

  • Shirinabadi, Reza Design, Manufacture, and Perform of First Electronic Seismic Sensor Dilatometer in Project of Tehran Metro line 6 as a Rapid Environmentally Friendly in-situ Test with Less Soil Disturbance [Volume 13, Issue 4, 2022, Pages 1107-1118]

  • Shojaei, V. Adsorptive Study of Cadmium Removal from Aqueous Solution Using a Coal Waste Loaded with Fe3O4 Nanoparticles [Volume 13, Issue 2, 2022, Pages 527-545]

  • Singh, Surya Pratap Slope Stability Analysis and Preventive Actions for a Landslide Location along NH-05 in Himachal Pradesh, India [Volume 13, Issue 3, 2022, Pages 667-678]

  • Singh, Surya PRATAP Formulation of a Bearing Capacity Equation for a Circular Footing with Vertical and Inclined Loads on Layered Sand [Volume 13, Issue 4, 2022, Pages 1015-1029]

  • Singh, Yadvendra Pratap A Deep Neural Network for Classification of Land Use Satellite Datasets in Mining Environments [Volume 13, Issue 3, 2022, Pages 797-808]

  • Sohbatzadeh, Laleh An Environmentally Friendly Method for Recovery of Metals from Cathode Material of Lithium-Ion Batteries using L-Glutamic, Malonic, and Ascorbic acid [Volume 13, Issue 4, 2022, Pages 1171-1188]

  • Soofastaei, A. Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]

  • Sultan shah, Kausar Evaluating Microscale Failure Response of Various Weathering Grade Sandstones Based on Micro-Scale Observation and Micro-Structural Modelling Subjected to Wet and Dry Cycles [Volume 13, Issue 2, 2022, Pages 341-355]

  • Surzhenko, Andrii Mykolaiovych Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]

T

  • Taghizadeh, Shadi Risk Assessment in Quarries using Failure Modes and Effects Analysis Method (Case study: West-Azerbaijan Mines) [Volume 13, Issue 3, 2022, Pages 715-725]

  • Taiwo, Blessing Olamide Improvement of Small-Scale Dolomite Blasting Productivity: Comparison of Existing Empirical Models with Image Analysis Software and Artificial Neural Network Models [Volume 13, Issue 3, 2022, Pages 627-641]

  • Torab, F. Mohammad Ore Deposit Boundary Modification in Afghanistan Aynak Central Copper Deposit using Sequential Indicator Simulation and Indicator Kriging [Volume 13, Issue 2, 2022, Pages 325-340]

  • Trajanova, Adrijana Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]

  • Tykhenko, Oksana Mykolaivna Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]

U

  • Ullah, Rafi Investigating Effect of Tunnel Size, Rock Mass Conditions, and In-Situ Stresses on Stability of Tunnels [Volume 13, Issue 4, 2022, Pages 973-987]

V

  • Vafaie, Hassan Modeling, Optimizing, and Characterizing Elimination Process of Cyanide Ion from an Industrial Wastewater of Gold Mine by Caro’s Acid Method [Volume 13, Issue 3, 2022, Pages 839-849]

W

  • Wageh Hussein, A. Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]

  • Walia, Alankrit Assessment of Slope Stability and Its Remedies in Palampur, Himachal Pradesh [Volume 13, Issue 3, 2022, Pages 767-780]

X

  • Xu, Leige Experimental Investigation on Deformation Behavior of Circular Underground Opening in Hard Soil using a 3D Physical Model [Volume 13, Issue 3, 2022, Pages 727-749]

Y

  • Yarahamdi Bafghi, Alireza Simulation of Crack Propagation Mechanism in Porous Media using Modified linear Element Displacement Discontinuity Method [Volume 13, Issue 3, 2022, Pages 903-927]

Z

  • Zadhesh, J. Determining Probability Distribution Functions of Rock Joint Geometric Properties [Volume 13, Issue 1, 2022, Pages 281-308]

  • Zare, Shokrollah Real-Scale Numerical Analyzing Dynamic Process of TBM Boring in Jointed Rock; a Case Study: Kerman Water Conveyance Tunnel in Iran [Volume 13, Issue 3, 2022, Pages 643-666]

  • Zarrin ghalam, Erfan PFC Simulation of Brazilian Tensile Strength Test in Geomaterials’ Specimens with T-shaped Non-persistent Joints [Volume 13, Issue 4, 2022, Pages 1189-1209]

  • Zendelska, Afrodita Comparison of Efficiencies of Neutralizing Agents for Heavy Metal Removal from Acid Mine Drainage [Volume 13, Issue 3, 2022, Pages 679-691]

  • Zolotarova, Oksana Viktorivna Determining Priority of Risk Factors in Technological Zones of Longwalls [Volume 13, Issue 3, 2022, Pages 751-765]