Rock Mechanics
ali Kazempour Osalou; sayfoddin moosazadeh; Ali Nouri Qarahasanlou; Mohammad-Reza Baghban Golpasand
Abstract
Nowadays, tunnel excavation plays a major role in the development of countries. Due to the complex and challenging ground conditions, a comprehensive study and analysis must be done before, during, and after the excavation of tunnels. Hence, the importance of study and evaluation of ground settlement ...
Read More
Nowadays, tunnel excavation plays a major role in the development of countries. Due to the complex and challenging ground conditions, a comprehensive study and analysis must be done before, during, and after the excavation of tunnels. Hence, the importance of study and evaluation of ground settlement is dramatically increased since many tunnel projects are performed in urban areas, where there are plenty of constructions, buildings, and facilities. For this reason, the control and prediction of ground settlement is one of the complicated topics in the field of risk engineering. Therefore, in this paper, the proportional hazard model (PHM) is used to analyze and study the ground settlement induced by Tabriz Metro Line 2 (TML2) tunneling. The PHM method is a semi-parametric regression method that can enter environmental conditions or factors affecting settlement probability. These influential factors are used as risk factors in the analysis. After establishing a database for a case study and using a proportional hazard model for surface settlement analysis, and then by evaluating the effect of environmental conditions on the ground surface settlement, it has been found that the risk factors of grouting pressure behind the segment, the ratio of tunnel depth to groundwater level, and drained cohesion strength at a significant level of 5% have a direct effect on the probability of settlement. The results also showed that the effect of grout injection pressure on ground subsidence is more than other parameters, and with increasing injection pressure, the probability of exceeding safe subsidence values decreases. In addition, it has been found that increasing the risk factor for the ratio of tunnel depth to groundwater level reduces the probability of exceeding the safe ground settlement. Finally, increasing the number of risk factors for drained cohesion strength increases the probability of exceeding safe settlement.
Rock Mechanics
Naeem Abbas; Li Kegang
Abstract
The study examined the influence of cohesion, friction angle, and tunnel diameter on stability within engineering and geotechnical frameworks, while considering the consequences of nearby excavations on the overall stability assessment. The results show that a higher angle of internal friction leads ...
Read More
The study examined the influence of cohesion, friction angle, and tunnel diameter on stability within engineering and geotechnical frameworks, while considering the consequences of nearby excavations on the overall stability assessment. The results show that a higher angle of internal friction leads to a decrease in soil stability number and weighting coefficient. Tunnel diameter significantly affects face support pressure, with larger diameters requiring stronger support due to increased stress. Higher friction angles help stabilize tunnel faces and mitigate diameter-related pressure effects. Stress redistribution around the tunnel is significant within 2 meters from the center, transitioning to elastic behavior elsewhere. A safety factor of 1.3 ensures tensile failure prevention in single and twin tunnels. Balanced stress distribution between tunnels with a slight difference is observed under isotropic in-situ stress. Numerical modeling enhances stress estimations and reveals changes during tunnel excavation, weakening the rock mass. Ground reaction curve analysis with support measures shows reduced tunnel convergence after implementation, suggesting support strategies like extended bolts using updated rock mass rating. The study improves tunnel design and stability assessment by comprehensively understanding stress redistribution and support strategies.
