Document Type: Original Research Paper

Authors

1 Department of Mining Engineering, Faculty of Engineering, Urmia University, Urmia, Iran

2 Department of Mining and Metallurgical Engineering, Yazd University, Yazd, Iran

3 Faculty of Industrial Engineering, Urmia University of Technology, Urmia, Iran

10.22044/jme.2020.9385.1842

Abstract

The computer-based 3D modeling of ore bodies is one of the most important steps in the resource estimation, grade determination, and production scheduling of open-pit mines. In the modeling phase, the volume of the orebody model is required to be filled by the blocks and sub-blocks. The determination of Block Size (BS) is important due to the dependence of the geostatistical issues and calculations related to mining capabilities on it. There are some factors effective in the determination of an optimal BS including the metal content, estimation error, recovery percentage, mining ability, safety, and dilution. In this work, an optimal BS is determined using a two-stage approach. In the proposed approach, the Fuzzy Delphi Analytic Hierarchy Process (FDAHP) and Fuzzy Multi-Objective Optimization by Ratio Analysis (FMOORA) methods are used. In the first phase, the weight of each criterion is calculated based on the opinions of the experts using the FDAHP method. In the second phase, the FMOORA method is applied in order to determine a suitable BS for the design and operation of mining considering the extracted weights in the previous phase. The block model of the Sungun copper mine is studied as a case study to evaluate the capability of the proposed approach. The results of implementation of this approach are desirable because of converting the opinions of the experts to fuzzy values, weighing the experts according to the experience and technical knowledge, weighting the criteria by FDAHP, and choosing the optimal option with FMOORA. Furthermore, the 12.5×12.5×12.5 m3 block (A5) is chosen as an appropriate BS, which is compatible with the real conditions of the studied mine.

Keywords

[1]. Abdollahi Sharif, J. and Bakhtavar, E. (2017). An integrated 3D simulation and MCDM for estimation of ore deposits. Arabian Journal of Geosciences. 10 (2): 22. DOI: https://doi.org/10.1007/s12517-016-2769-z.

[2]. JORC. (2004). Australasian code for reporting of exploration results, mineral resources and ore reserves (the JORC code), Edition. Prepared by the Joint Ore Reserve Committee of the Australasian Institute of Mining and Metallurgy, Australian Institute of Geoscientists and Minerals Council of Australia (JORC). 21pp.

[3]. Kržanović, D., Vušović, N., Ljubojev, M. and Rajković, R. (2017). Importance of planning the open pits in the conditions of contemporary mining: A case study: The open pit South mining district Majdanpek. Mining and Metallurgy Engineering Bor. (1-2): 15-22.

[4]. Hayati, M., Rajabzadeh, R. and Darabi, M. (2015). Determination of optimal block size in Angouran mine using VIKOR method. Journal of Materials and Environmental Science. 6 (11): 3236-3244.

[5]. Ruiseco, J.R., Williams, J. and Kumral, M. (2016). Optimizing ore–waste dig-limits as part of operational mine planning through genetic algorithms. Natural Resources Research. 25 (4): 473-485.

[6]. Bascetin, A., Tuylu, S. and Nieto, A. (2011). Influence of the ore block model estimation on the determination of the mining cutoff grade policy for sustainable mine production. Environmental Earth Sciences. 64 (5): 1409-1418.

[7]. Sirelda, B. and Resmi, K. (2017). The ore deposit 3D modelling, new effective solution in the optimization of geological and mining works. Earth Sciences. 6 (3): 35-43.

[8]. Apel, M. (2006). From 3D geomodelling systems towards 3D geosciences information systems: Data model, query functionality, and data management. Computers & Geosciences. 32 (2): 222-229.

[9]. Haldar, S.K. (2018). Mineral exploration: principles and applications. Elsevier. 378pp.

[10]. Jara, R.M., Couble, A., Emery, X., Magri, E.J. and Ortiz, J.M. (2006). Block size selection and its impact on open-pit design and mine planning. Journal of the South African Institute of Mining and Metallurgy. 106 (3): 205-212.

[11]. Qiu, M., Shi, L., Teng, C. and Zhou, Y. (2017). Assessment of water inrush risk using the fuzzy delphi analytic hierarchy process and grey relational analysis in the Liangzhuang coal mine, China. Mine Water and the Environment. 36 (1): 39-50.

[12]. Esmailzadeh, A., Mikaeil, R., Sadegheslam, G., Aryafar, A and Hosseinzadeh Gharehgheshlagh, H. (2018). Selection of an appropriate method to extract the dimensional stones using FDAHP & TOPSIS techniques. Journal of Soft Computing in Civil Engineering. 2 (1): 101-116.

[13]. Ghadernejad, S., Jafarpour, A. and Ahmadi, P. (2019). Application of an integrated decision-making approach based on FDAHP and PROMETHEE for selection of optimal coal seam for mechanization; A case study of the Tazareh coal mine complex, Iran. International Journal of Mining and Geo-Engineering. 53 (1): 15-23.

[14]. Bajić, S., Bajić, D., Gluščević, B. and RistićVakanjac, V. (2020). Application of fuzzy Analytic Hierarchy Process to underground mining method selection. Symmetry. 12 (2): 192. DOI: https://doi.org/10.3390/sym12020192.

[15]. Bakhtavar, E., Yousefi, S. and Jafarpour, A. (2019). Evaluation of shaft locations in underground mines: Fuzzy multi-objective optimization by ratio analysis with fuzzy cognitive map weights. Journal of the Southern African Institute of Mining and Metallurgy. 119 (10): 855-864.

[16]. Ghoushchi, S.J., Yousefi, S. and Khazaeili, M. (2019). An extended FMEA approach based on the Z-MOORA and fuzzy BWM for prioritization of failures. Applied Soft Computing, 81, 105505.

[17]. Bakhtavar, E. and Yousefi, S. (2018). Assessment of workplace accident risks in underground collieries by integrating a multi-goal cause-and-effect analysis method with MCDM sensitivity analysis. Stochastic environmental research and risk assessment. 32 (12): 3317-3332.

[18]. Leuangthong, O., Neufeld, C. and Deutsch, C.V. (2003). Optimal selection of selective mining unit (SMU) size. University of Alberta, Alberta. 16pp.

[19]. Huang, P., Yang, P., Chen, Y. and Liu, C. (2011). Three-dimensional model of Cangshang gold mine based on Surpac. International Journal of Advancements in Computing Technology. 3 (11): 299-306.

[20]. Birch, C. (2019). Optimisation of mining block size for narrow tabular gold deposits. In Proceedings of the 27th International Symposium on Mine Planning and Equipment Selection-MPES 2018 (pp. 121-141). Springer, Cham.

[21]. Moharaj, M.C. and Wangmo, Y. (2014). Ore body modelling and comparison of different reserve estimation techniques (Doctoral dissertation). 158pp.

[22]. Chanderman, L. (2015). 3D geological modelling and mineral resource estimate for the FE2 gold deposit, Sadiola mine, Mali (Doctoral dissertation). 147pp.

[23]. David, M. (1988). Handbook of applied advanced geostatistical ore reserve estimation. Developments in Geomathematics 6. Amsterdam, Elsevier. 232pp.

[24]. David, M. (2012). Geostatistical ore reserve estimation. Elsevier. 384pp.

[25]. Mikaeil, R., Ataei, M. and Yousefi, R. (2011). Application of a fuzzy analytical hierarchy process to the prediction of vibration during rock sawing. Mining Science and Technology (China). 21 (5): 611-619.

[26]. Ataei, M., Mikaeil, R., Hoseinie, S.H. and Hosseini, S.M. (2012). Fuzzy analytical hierarchy process approach for ranking the sawability of carbonate rock. International Journal of Rock Mechanics and Mining Sciences. 50: 83-93.

[27]. Mikaeil, R., Yousefi, R. and Ataei, M. (2011). Sawability ranking of carbonate rock using fuzzy analytical hierarchy process and TOPSIS approaches. ScientiaIranica. 18 (5): 1106-1115.

[28]. Naghadehi, M.Z., Mikaeil, R. and Ataei, M. (2009). The application of fuzzy analytic hierarchy process (FAHP) approach to selection of optimum underground mining method for Jajarm Bauxite Mine, Iran. Expert Systems with Applications. 36 (4): 8218-8226.

[29]. Bangian, A.H., Ataei, M., Sayadi, A. and Gholinejad, A. (2011). Fuzzy analytical hierarchy processing to define optimum post mining land use for pit area to clarify reclamation costs. Gospodarka Surowcami Mineralnymi. 27: 145-168.

[30]. Mikaeil, R., Naghadehi, M.Z., Ataei, M. and Khalokakaie, R. (2009). A decision support system using fuzzy analytical hierarchy process (FAHP) and TOPSIS approaches for selection of the optimum underground mining method. Archives of Mining Sciences. 54 (2): 341-368.

[31]. Bangian, A.H., Ataei, M., Sayadi, A. and Gholinejad, A. (2011). The application of fuzzy MADM modeling to define optimum post mining land use for pit area to recognize reclamation costs in open pit mining. Archives of Mining Sciences. 56 (1): 93-118.

[32]. Naghadehi, M.Z., Mikaeil, R. and Ataei, M. (2009). The application of fuzzy analytic hierarchy process (FAHP) approach to selection of optimum underground mining method for Jajarm Bauxite Mine, Iran. Expert Systems with Applications. 36 (4): 8218-8226.

[33]. Karadogan, A., Bascetin, A. and Kahriman, A. (2001). A new approach in selection ofunderground mining method.in: proceeding of the International Conference ModernManagement of Mine Producing. pp. 171-183.

[34]. Ataei, M. (2005). Multicriteria selection for an alumina-cement plant location in East Azerbaijan province of Iran. Journal of the South African Institute of Mining and Metallurgy 105 (7): 507-514.

[35]. Samanta, B., Sarkar, B. and Mukherjee, S.K. (2002). Selection of opencast mining equipment by a multi-criteria decision-making process. Mining Technology. 111 (2): 136-142.

[36]. Oraee, K., Hosseini, N. and Gholinejad, M. (2009). A new approach for determination of tunnel supporting system using analytical hierarchy process (AHP). In: proceedings of 2009 Coal Operators’ Conference, Wollongong, Australia, pp. 78-89.

[37]. Pineda, P.J.G., Liou, J.J., Hsu, C.C. and Chuang, Y.C. (2018). An integrated MCDM model for improving airline operational and financial performance. Journal of Air Transport Management. 68: 103-117.

[38]. Rahimdel, M.J. and Bagherpour, R. (2018). Haulage system selection for open pit mines using fuzzy MCDM and the view on energy saving. Neural Computing and Applications. 29 (6): 187-199.

[39]. Sitorus, F., Cilliers, J.J. and Brito-Parada, P.R. (2019). Multi-criteria decision making for the choice problem in mining and mineral processing: applications and trends. Expert Systems with Applications, 121, 393-417.

[40]. Liang, W., Luo, S. and Zhao, G. (2019). Evaluation of cleaner production for gold mines employing a hybrid multi-criteria decision making approach. Sustainability. 11 (1): 146.

[41]. Ataei, M., and Mottahedi, A. (2020). Risk assessment of flyrock in surface mines using FFTA-MCDMs combination. Journal of Mining and Environment. DOI:10.22044/JME.2020.9107.1799.

[42]. Tyulenev, M., Markov, S., Cehlar, M., Zhironkin, S. and Gasanov, M. (2018). The model of direct dumping technology implementation for open pit coal mining by high benches. Acta Montanistica Slovaca. 23 (4): 368-377.

[43]. Mudd, G.M., Weng, Z., Jowitt, S.M., Turnbull, I.D. and Graedel, T.E. (2013). Quantifying the recoverable resources of by-product metals: The case of cobalt. Ore Geology Reviews. 55: 87-98.

[44]. Mucha, J., Wasilewska-Blaszczyk, M. and Kotlinski, R.A. (2013). Variability and accuracy of polymetallic nodules abundance estimations in the IOM area-statistical and geostatistical approach. In Tenth ISOPE Ocean Mining and Gas Hydrates Symposium. International Society of Offshore and Polar Engineers. pp. 22-26.

[45]. Wang, J., Zhao, H., Bi, L. and Wang, L. (2018). Implicit 3D modeling of ore body from geological boreholes data using hermite radial basis functions. Minerals. 8 (10): 443.

[46]. Susanto, A., Purwanto, P., Sunoko, H.R. and Setiani, O. (2017). A kriging method for mapping underground mine air pollution. Advanced Science Letters. 23 (3): 2329-2332.

[47]. Hickenbottom, K.L. and Cath, T.Y. (2014). Sustainable operation of membrane distillation for enhancement of mineral recovery from hypersaline solutions. Journal of Membrane Science. 454: 426-435.

[48]. Saaty, T.L. (1980). The Analytic Hierarchy Process. New York: McGraw-Hill. 376pp.

[49]. Bogdanovic, D., Nikolic, D. and Ilic, I. (2012). Mining method selection by integrated AHP and PROMETHEE method. Anais da Academia Brasileira de Ciências. 84 (1): 219-233.

[50]. Tao, Z., Li, M., Zhu, C., He, M., Zheng, X. and Yu, S. (2018). Analysis of the critical safety thickness for pretreatment of mined-out areas underlying the final slopes of open-pit mines and the effects of treatment. Shock and Vibration, 2018. 8pp.

[51]. Ebrahimi, A. and Eng, P. (2013). The importance of dilution factor for open pit mining projects. In Proceedings of the 23rd World Mining Congress. 16pp.

[52]. Zarshenas, Y. and Saeedi, G. (2016). Risk assessment of dilution in open pit mines. Arabian Journal of Geosciences. 9 (3): 209.

[53]. Câmara, T.R., Leal, R.S., Peroni, R.D.L. and Capponi, L.N. (2019). Controlling operational dilution in open-pit mining. Mining Technology. 128 (1): 1-8.

[54]. Zadeh, L.A. (1965). Fuzzy sets. Information and control. 8: 338-353.

[55]. Bellman, R.E. and Zadeh, L.A. (1970). Decision-making in a fuzzy environment. Management science. 17 (4): B-141.

[56]. Mintzberg, H. and Lample, J. (2001). Reflection on the strategy process strategic thinking for the next economy. Sossey-Bass, Available at: http://sloanreview. Mit. Edu/article/reflecting-on-the-strategy-process.

[57]. Rowe, G., Wright, G. and Bolger, F. (1991). Delphi: a reevaluation of research and theory. Technological forecasting and social change. 39 (3): 235-251.

[58]. Kuo, Y.F. and Chen, P.C. (2008). Constructing performance appraisal indicators for mobility of the service industries using Fuzzy Delphi Method. Expert Systems with Applications. 35 (4): 1930-1939.

[59]. Cheng, C.H. and Lin, Y. (2002). Evaluating the best main battle tank using fuzzy decision theory with linguistic criteria evaluation. European journal of operational research. 142 (1): 174-186.

[60]. Wang, T.C. and Chen, Y.H. (2007). Applying consistent fuzzy preference relations to partnership selection. Omega. 35 (4): 384-388.

[61]. Deng, H. (1999). Multicriteria analysis with fuzzy pairwise comparison.In Fuzzy Systems Conference Proceedings, 1999.FUZZ-IEEE'99.1999 IEEE International (Vol. 2, pp. 726-731). IEEE.

[62]. Brauers, W.K. and Zavadskas, E.K. (2006).The MOORA method and its application to privatization in a transition economy. Control and Cybernetics. 35: 445-469.

[63]. Vatansever, K. and Uluköy, M. (2013). Kurumsal kaynak planlaması sistemlerinin bulanık ahp ve bulanık moora yöntemleriyle seçimi: Üretim sektöründe bir uygulama. Celal Bayar Üniversitesi Sosyal Bilimler Dergisi. 11 (2): 274-293.‏

[64]. Baležentis, A., Baležentis, T., & Brauers, W. K. (2012). Personnel selection based on computing with words and fuzzy MULTIMOORA. Expert Systems with applications. 39 (9): 7961-7967.

[65]. Bland, J.M. and Altman, D.G. (1997). Statistics notes: Cronbach's alpha. Bmj. 314 (7080): 572.

[66]. Moore, F., Esmaeili, K., Keshavarzi, B., Behrouz, M. and Piruznia, N. (2010). Environmental geochemistry of water and sediment in the Sungun copper deposit, northwest Iran. The 1th International Applied Geological Congress, Department of Geology, Islamic Azad University - Mashad Branch, Iran, 26-28 April 2010.

[67]. Soltani, F., Afzal, P. and Asghari, O. (2014). Delineation of alteration zones based on Sequential Gaussian Simulation and concentration–volume fractal modeling in the hypogene zone of Sungun copper deposit, NW Iran. Journal of Geochemical Exploration. 140: 64-76.

[68]. Hassanpour, S. (2017). The Sungun porphyry magma resource and the 120,000-year difference in age between the main stock and the first dike: New evidence from 87Sr/86Sr, 143Nd/144Nd and Pb, SHRIMP U–Pb zircon dating in NW Iran. Iranian Journal of Earth Sciences. 9 (2): 94-104.