Rock Mechanics
A. Alikhani; M. Taheri Moghadder; H. Mohammadi
Abstract
One of the most effective parameters in economics of open-pit mines is the pit slope angle, so that the slope angle more than the optimum value increases the probability of a large failure in the pit wall and the slope angle less than the optimum value leads to increasing stripping ratio and reducing ...
Read More
One of the most effective parameters in economics of open-pit mines is the pit slope angle, so that the slope angle more than the optimum value increases the probability of a large failure in the pit wall and the slope angle less than the optimum value leads to increasing stripping ratio and reducing net present value of mine. Therefore, in this paper, considering the limit equilibrium methods of modified Bishop and modified Janbu and numerical models of the slope stability analysis, the effect of overall slope angle on the Economics of open pit mines was investigated. In addition, it was shown that selecting the overall slope angle less than the optimum value leads to reducing the depth of open-pit mining (the ultimate pit depth) and consequently, reducing the net present value of mine. Finally, in homogenous and Isotropic media, the results of Bishop and Janbu and numerical modeling are close together.
Environment
S. Abbaszade; F. Mohammad Torab; A. Alikhani; H. Molayemat
Abstract
In geochemical exploration, there are various techniques such as univariate and multivariate statistical methods available for recognition of anomalous areas. Univariate techniques are usually utilized to estimate the threshold value, which is the smallest quantity among the values representing the anomalous ...
Read More
In geochemical exploration, there are various techniques such as univariate and multivariate statistical methods available for recognition of anomalous areas. Univariate techniques are usually utilized to estimate the threshold value, which is the smallest quantity among the values representing the anomalous areas. In this work, a combination of the Sequential Gaussian Simulation (SGS) and Gap Statistics (GS) methods was utilized as a new technique to estimate the threshold and to visualize the anomalous regions in the Hararan area, which is located in SE Iran, and consists of copper mineralization that seems to be connected to a porphyry Cu-Mo system. Furthermore, the most important advantage of this method is the reliable assessment of the anomalous areas. In other words, the anomalous areas were discriminated in terms of their probability values. The regions with high probability values were reliable and appropriate to locate the drilling points for a detailed exploration. It not only decreases the risk, cost, and time of exploration but also increases the drilling point reliability and precision of reserve estimation after drilling. In this research work, the results of analysis of 607 lithogeochemical samples for the element Cu were used. The SGS method was performed on the transformed data and 50 realizations were obtained. In the next step, the back-transformed realizations were utilized to obtain an E-type map, which was the average of 50 realizations. Moreover, the results of the GS method showed that the Cu threshold value was 228 ppm in the area. Therefore, using the E-type map, areas with values greater than 228 ppm were introduced as the anomalous areas. Finally, the probability map of the exceeding threshold values was acquired, and the anomalous districts located in the southern part of the studied area were considered as more reliable regions for future detailed exploration and drilling.