Exploitation
Babatunde Adebayo; Blessing Olamide Taiwo; BUSUYI THOMAS AFENI; Aderoju Oluwadolapo Raymond; Joshua Oluwaseyi Faluyi
Abstract
The quarry operators and managers are having a running battle in determining with precision the rate of deterioration of the button of the drill bit as well as its consumption. Therefore, this study is set to find the best-performing model for predicting the drill bit button's wear rate during rock drilling. ...
Read More
The quarry operators and managers are having a running battle in determining with precision the rate of deterioration of the button of the drill bit as well as its consumption. Therefore, this study is set to find the best-performing model for predicting the drill bit button's wear rate during rock drilling. Also, the rate at which drill bit buttons wear out during rock drilling in Ile-Ife, Osogbo, Osun State, and Ibadan, Oyo State, Southwest, Nigeria was investigated. Artificial Neural Network (ANN), Adaptive Neuro-Fuzzy Inference System (ANFIS), and adaptive moment Estimation-based Long Short-Term Memory (LSTM) machine learning approaches were used to create models for estimating the bit wear rate based on circularity factor, rock grain size, equivalent quartz content, uniaxial compressive strength, porosity, and abrasive properties of the rock. The performance of the models was measured using a new error estimation index and four other convectional performance estimators. The analysis of performance shows that the adaptive moment estimation algorithm-based LSTM model did better and more accurately than the other models. Thus, the LSTM models presented can be used to improve drilling operations in real-life situations.
Blessing olamide Taiwo; Raymond O Aderoju; Olutosin Mojisola Falade; Yewuhalashet Fissha; O B Ogunyemi; A O Omosebi; S. Omeyoma; Oluwatomisin Victoria Adediran; H A Bamidele; Michael Ogundiran
Abstract
Overburden material is typically removed in surface mining operations to expose the primary ore deposit. Because of the presence of trace minerals, environmental pollution and acid drainage are caused when the overburdened materials are removed from the mine site and transported to another location. ...
Read More
Overburden material is typically removed in surface mining operations to expose the primary ore deposit. Because of the presence of trace minerals, environmental pollution and acid drainage are caused when the overburdened materials are removed from the mine site and transported to another location. In order to promote the economic and environmental sustainability of dolomite mining, the waste materials must therefore be evaluated for their environmental impact and potential industrial application. Akoko Edo Nigeria is known for its large production of dolomite and carbonate rock with large tonnage waste. The hydrogeochemical and geotechnical analysis of selected mine in this area is performed by randomly collecting and analyzing soil and water samples from four exploration drill holes using an atomic absorption spectrophotometer. The geotechnical analysis results show that dolomite waste soil is suitable for constriction material addictive such as road subgrade, dam design, highway, and other construction work. According to the study's findings, the mine water is slightly polluted, as measured by both the Overall Index of Pollution (OIP) and the Pollution Load Index (PLI). The chemical analysis of the mine pit water also reveal that the mean value of electrical conductivity, TDS, iron, manganese, copper, and lead all exceed the WHO and SON standards for a safe drinking water. A new pollution assessment model with suitable prediction correlation accuracy (R2= 0.76, mean average error = 0.27) is also developed in this work.
