Hafeezur Rehman; Wahid Ali; Kausar sultan Shah; Mohd Hazizan bin Mohd Hashim; Naseer Muhammad Khan; Muhammad Ali; Muhammad Kamran; Muhammad Junaid
Abstract
Support design is the main goal of the Q and rock mass rating (RMR) systems. An assessment of the Q and RMR system application in tunnelling involving high-stress ground conditions shows that the first system is more appropriate due to the stress reduction factor. Recently, these two systems have been ...
Read More
Support design is the main goal of the Q and rock mass rating (RMR) systems. An assessment of the Q and RMR system application in tunnelling involving high-stress ground conditions shows that the first system is more appropriate due to the stress reduction factor. Recently, these two systems have been empirically modified for designing the excavation support pattern in jointed and highly stressed rock-mass conditions. This research work aims to highlight the significance of the numerical modelling, and numerically evaluate the empirically suggested support design for tunnelling in such an environment. A typical horse-shoe-shaped headrace tunnel at the Bunji hydropower project site is selected for this work. The borehole coring data reveal that amphibolite and Iskere Gneiss are the main rock mass units along the tunnel route. An evaluation of the proposed support based on the modified empirical systems indicate that the modified systems suggest heavy support compared to the original empirical systems. The intact and mass rock properties of the rock units are used as the input for numerical modelling. From numerical modelling, the axial stresses on rock bolts, thrust bending moment of shotcrete, and rock load from modified RMR and Q-systems are compared with the previous studies. The results obtained indicate that the support system designed based on modified version of the empirical systems produce better results in terms of tunnel stability in high-stress fractured rock mass conditions.
M. Ghaedi Ghalini; M. Bahaaddini; M. Amiri Hossaini
Abstract
Estimation of the in-situ block size is known as a key parameter in the characterization of the mechanical properties of rock masses. As the in-situ block size cannot be measured directly, several simplified methods have been developed, where the intrinsic variability of the geometrical features of discontinuities ...
Read More
Estimation of the in-situ block size is known as a key parameter in the characterization of the mechanical properties of rock masses. As the in-situ block size cannot be measured directly, several simplified methods have been developed, where the intrinsic variability of the geometrical features of discontinuities are commonly neglected. This work aims to estimate the in-situ block size distribution (IBSD) using the combined photogrammetry and discrete fracture network (DFN) approaches. To this end, four blasting benches in the Golgohar iron mine No. 1, Sirjan, Iran, are considered as the case studies of this research work. The slope faces are surveyed using the photogrammetry method. Then 3D images are prepared from the generated digital terrain models, and the geometrical characteristics of discontinuities are surveyed. The measured geometrical parameters are statistically analysed, and the joint intensity, the statistical distribution of the orientation, and the fracture trace length are determined. The DFN models are generated, and IBSD for each slope face is determined using the multi-dimensional spacing method. In order to evaluate the validity of the generated DFN models, the geological strength index (GSI) as well as the stereographic distribution of discontinuities in the DFN models are compared against the field measurements. A good agreement has been found between the results of the DFN models and the filed measurements. The results of this work show that the combined photogrammetry and DFN techniques provide a robust, safe, and time-efficient methodology for the estimation of IBSD.
Omid Saeidi; Ahmad Ramezanzadeh; Farhang Sereshki; Seyed Mohammad Esmaeil Jalali
Abstract
This study aims at presenting a numerical model for predicting grout flow and penetration length into the jointed rock mass using Universal Distinct Element Code (UDEC). The numerical model is validated using practical data and analytical method for grouting process. Input data for the modeling, including ...
Read More
This study aims at presenting a numerical model for predicting grout flow and penetration length into the jointed rock mass using Universal Distinct Element Code (UDEC). The numerical model is validated using practical data and analytical method for grouting process. Input data for the modeling, including geomechanical parameters along with grout properties, were obtained from a case study. The effect of rock mass properties such as joint hydraulic aperture, spacing, trace length, orientation and grout properties as yield stress and water to cement, w/c ratio was considered on grout flow rate and penetration length. To illustrate the effect of aforementioned properties, models were constructed with dimensions of 40×20m. A vertical borehole with diameter of 60mm and 10m depth was drilled in a jointed rock media. The results were in a good agreement with analytical method. It was observed that by increasing joint hydraulic aperture, grouting flow increases using a power law function. The optimum grout penetration observed with joint sets intersection of 40°-60° as experienced in practice. With an increase in joint spacing grout penetration increases around borehole when spacing exceeds two meters it decreases, gradually.
