Mohammad Omidi manesh; Vahab Sarfarazi; Nima Babanouri; Amir Rezaei
Abstract
This work presents the hollow center cracked disc (HCCD) test and the cracked straight through Brazilian disc (CSTBD) test of oil well cement sheath using the experimental test and Particle Flow Code in two-dimensions (PFC2D) in order to determine mode I fracture toughness of cement sheath. The tensile ...
Read More
This work presents the hollow center cracked disc (HCCD) test and the cracked straight through Brazilian disc (CSTBD) test of oil well cement sheath using the experimental test and Particle Flow Code in two-dimensions (PFC2D) in order to determine mode I fracture toughness of cement sheath. The tensile strength of cement sheath is 1.2 MPa. The cement sheath model is calibrated by outputs of the experimental test. Secondly, the numerical HCCD model and CSTBD model with diameter of 100 mm are prepared. The notch lengths are 10 mm, 20 mm, 30 mm, and 40 mm. The tests are performed by the loading rate of 0.018 mm/s. When the notch length in CSTBD is 40 mm, the external work is decreased 48%, related to the maximum external work of model with notch length of 10 mm (0.225 KN*mm decreased to 0.116 KN*mm). When the notch length in HCCD is 30 mm, the external work is decreased 33%, related to the maximum external work of model with notch length of 10 mm (0.06 KN*mm decreased to 0.04 KN*mm). The fracture energy is largely related to the joint length. The fracture energy is decreased by increasing the notch length. In constant to the notch length, the fracture energy of the CSTBD model is more than the HCCD model. Mode I fracture toughness is constant by increasing the notch length. The HCCD test and the CSTBD test yield a similar fracture toughness due to a similar tensile stress distribution on failure surface. The experimental outputs are in accordance to the numerical results.
Mohammad Omidi manesh; Vahab Sarfarazi; Nima Babanouri; Amir Rezaei
Abstract
This work presents the Semi-Circular Bend (SCB) test and Notched Brazilian Disc (NBD) test of shotcrete using experimental test and Particle Flow Code in two-dimensions (PFC2D) in order to determine a relation between mode I fracture toughness and the tensile strength of shotcrete. Firstly, the micro-parameters ...
Read More
This work presents the Semi-Circular Bend (SCB) test and Notched Brazilian Disc (NBD) test of shotcrete using experimental test and Particle Flow Code in two-dimensions (PFC2D) in order to determine a relation between mode I fracture toughness and the tensile strength of shotcrete. Firstly, the micro-parameters of flat joint model are calibrated using the results of shotcrete experimental test (uniaxial compressive strength and splitting tensile test). Secondly, numerical models with edge notch (SCB model) and internal notch (NBD model) with diameter of 150 mm are prepared. Notch lengths are 20 mm, 30 mm, and 40 mm. The tests are performed by the loading rate of 0.016 mm/s. Tensile strength of shotcrete is 3.25 MPa. The results obtained show that by using the flat joint model, it is possible to determine the crack growth path and crack initiation stress similar to the experimental one. Mode I fracture toughness is constant by increasing the notch length. Mode I fracture toughness and tensile strength of shotcrete can be related to each other by the equation, σt = 6.78 KIC. The SCB test yields the lowest fracture toughness due to pure tensile stress distribution on failure surface.
Rock Mechanics
K. Abdolghanizadeh; M. Hosseini; M. Saghafiyazdi
Abstract
Natural and artificial materials including rocks and cement-based materials such as concrete and cement mortar are affected both physically and chemically by various natural factors known as weathering factors. The freeze-thaw process, as a weathering factor, considerably affects the properties of rocks ...
Read More
Natural and artificial materials including rocks and cement-based materials such as concrete and cement mortar are affected both physically and chemically by various natural factors known as weathering factors. The freeze-thaw process, as a weathering factor, considerably affects the properties of rocks and concrete. Therefore, the effect of the freeze-thaw process on the physical and mechanical properties of materials should be taken into account in areas with the risk of this process. Given that few studies have been conducted on the effect of the freeze-thaw process on the fracture toughness, in this work, we aimed at investigating the effects of the freeze-thaw cycles and freezing temperature on the mode I and mode II fracture toughness of cement mortar. To this end, specimens were exposed to 0, 5, 10, 20, and 30 freeze-thaw cycles, and the mode I and mode II fracture toughness was determined in different cycles. The effect of freezing temperature in a freeze-thaw cycle on the mode I and mode II fracture toughness was also investigated. The damage factor was also defined based on the effective porosity of cement mortar, and its changes with the number of freeze-thaw cycles and mode I and mode II fracture toughness were studied. Finally, the decay function model provided by Mutluturk was investigated. According to the results obtained, the mode I and mode II fracture toughness of cement mortar decreased linearly with increase in the number of freeze-thaw cycles. The mode I and mode II fracture toughness decreased linearly with increase in the freezing temperature in a freeze-thaw cycle. The damage factor increased with increase in the number of freeze-thaw cycles, and, additionally, its relationship with mode I and mode II fracture toughness exhibited a linear behavior.
