Document Type : Original Research Paper
Authors
School of Mining Engineering, College of Engineering, University of Tehran, Iran.
Abstract
The mechanisms of deformation and failure of the structures in and on the jointed rock masses are often governed by the characteristics of the geometrical properties of joints. Since the joint geometry properties have a range of values, it is helpful to understand the distribution of these values in order to predict how the extreme values may be compared with the values obtained from a small sample. This work studies three datasets of joint systems (1652 joint data) from nine outcrops of igneous, sedimentary, and metamorphic rocks in order to determine the probability distribution function of the rock joint geometry properties. Consequently, the goodness-of-fit (GOF) tests are applied to obtain the data. According to these GOF tests, the Lognormal is the best probability distribution function representing the joint spacing, aperture, and trace length. The Cauchy is the best probability distribution function for the joint dip angle. It is found that the Cauchy distribution function is the best probability distribution function to represent the joint dip direction of igneous rocks, and the Burr distribution function is the best probability distribution function to define the joint dip direction of the sedimentary and metamorphic rocks.
Keywords
[1]. Hancock, P. (1995). Brittle micro tectonics: principles and practice. Journal of Structural Geology, 7(3,4), 437-457.
[2]. Hudson, J.A. and Harrison, J.P. (1997). Engineering Rock Mechanics: An Introduction to the Principles. Elsevier, Oxford.
[3]. Priest, D.S. (1993). Discontinuity analysis for rock engineering. London: Chapman & Hall.
[4]. Oda, M. A. (1988). method for evaluating the representative elementary volume based on joint survey of rock mass. Can Geotech, 25, 440-447.
[5]. Adler, P.M. and Thovert. J.F. (1999). Fractures and Fracture Networks. Kluwer, Dordrecht. Netherlands.
[6]. Tsang, C.F. and Neretnieks. I. (1998). Flow channeling in heterogeneous fractured rocks. Rev Geophys, 36, 275-298.
[7]. Sahimi, M. (1995). Flow and Transport in Porous Media and Fractured Rock. New York: VCH.
[8]. Bour, O., Davy, P. and Darcel. C. (2002). A statistical scaling model for fracture network geometry, with validation on a multiscale mapping of a joint network (Hornelen Basin, Norway). Geophys Res, 107(B6),10.1029/2001JB000176.
[9]. Darcel, C., Bour, O., Davy, P. and de Dreuzy. J.R. (2003). Connectivity properties of two-dimensional fractures networks with stochastic fractal correlation. Water Resour Res, 39(10), 1272, doi:10.1029/2002WR001628.
[10]. de Dreuzy, J.R. and Erhel. J. (2003). Efficient algorithms for the determination of the connected fracture network and the solution of the steady-state flow equation in fracture networks-short notes. Comp Geosci, 29, 107-111.
[11]. de Dreuzy, J. R., Darcel C, C., Davy P, P., & Bour, O. (2004). Influence of spatial correlation fracture centers on the permeability of two-dimensional fracture networks following a power law length distribution. Water Resour Res, 40, W01502, doi:10.1029/2003WR002260.
[12]. Mourzenko, V.V., Thovert, J.F. and Adler, P. M. (2004). Macroscopic permeability of three-dimensional networks with power-law size distribution. Phys Rev, E (69): 066307,1-13.
[13]. Kulatilake, P., Wang, S. and Stephenson, O. (1993). Scale effects of the deformability of jointed rock at the three-dimensional level. In P. d. Cunha (Ed.), Scale Effects in Rock Masses 93. Lisbon.
[14]. Welideniya, H.S. (2005). Laboratory evaluation and modeling of shear strength of infilled joints under constant normal stiffness (CNS) conditions. Australia: Univ. Wollongong.
[15]. Wang, x.B. (2007). Effect of joint width on strength, stress-strain curve and strain localization of rock mass in uniaxial plane strain compression. Key Eng Maters, 353-358, 1129-1132.
[16]. Baghbanan, A. (2008). Scale And Stress Effects on Hydro-Mechanical Properties of Fractured Rock Masses. Trita-Lwr Ph.D. 1040, KTH land and water resources engineering.
[17]. Meyer, T. and Einstein, H.H. (2002). Geologic Stochastic Modeling and Connectivity Assessment of Fracture Systems in the Boston Area. Rock Mechanics and Rock Engineering, 35(1), 23–44.
[18]. Odling, N.E., Gillespie, P., Bourgine, B., Castaing, C., Chiles, J.-P., Christensen, N.P., Watterson, J. (1999). Variations in fracture system geometry and their implications for fluid flow in fractured hydrocarbon reservoir. Petroleum Geoscience, 5, 373-384.
[19]. Mohamad Javad, A., Abdolhadi, G. and Seyed Amirasad, F. (2021). A new peak shear strength criterion of three-dimensional rock joints considering the scale effects. Arabian Journal of Geosciences, 14(936). doi: https://doi.org/10.1007/s12517-021-07319-5.
[20]. Yingchun, L., Chun'an, T. and Chuangzhou, W. (2020). A New Shear Strength Criterion of Three-Dimensional Rock Joints. Rock Mechanics and Rock Engineering, 53, 1477-1483.
[21]. Miao, C., Sheng-Qi, Y., Pathegama Gamage, R. and Yuan-Chao, Z. (2021). Cracking behavior of rock containing non-persistent joints with various joints inclinations. Theoretical and Applied Fracture Mechanics, 109. doi:https://doi.org/10.1016/j.tafmec.2020.102701.
[22]. Alejandro, C., Thomas, F. and Carlos, S. (2021). Natural Rock Fractures: From Aperture to Fluid Flow. Rock Mechanics and Rock Engineering, 54, 5827-5844.
[23]. Ameneh f, D., & Rasoul, A. (2015). Evaluation of Hydraulic Aperture of the Joints of Behesht Abad Dam Foundation, Iran. Geology, 5(6), 7.
[24]. Gaojian, H. and Gang, M. (2021). Size effect of parallel-joint spacing on uniaxial compressive strength of rock. doi: https://doi.org/10.1371/journal.pone.0257245.
[25]. Wentao, X., Yangsong, Z., Xiaozhao, L., Xinyong, W., Fei, M. and Jiabin, Z. (2020). Extraction and statistics of discontinuity orientation and trace length from typical fractured rock mass: A case study of the Xinchang underground research laboratory site, China. Engineering Geology, 269. doi: https://doi.org/10.1016/j.enggeo.2020.105553.
[26]. Jiateng, G., Yinhe, L., Lixin, W., Shanjun, L., Tianhong, Y., Wancheng, Z. and Zirui, Z. (2019). A geometry- and texture-based automatic discontinuity trace extraction method for rock mass point cloud. International Journal of Rock Mechanics and Mining Sciences. doi: https://doi.org/10.1016/j.ijrmms.2019.104132.
[27]. Jiayao, C., Mingliang, Z., Hongwei, H., Dongming, Z., & Zhicheng, P. (2021). Automated extraction and evaluation of fracture trace maps from rock tunnel face images via deep learning. International Journal of Rock Mechanics and Mining Sciences. doi: https://doi.org/10.1016/j.ijrmms.2021.104745.
[28]. Hammah, R., Yacouh, T. and Curran, J. (January 4-10, 2009). Numerical Modelling of Slope Uncertainty Due to Rock Mass Jointing. International Conference on Rock Joints and Jointed Rock Masses. Tucson, Arizona, USA.
[29]. Sari, M. (2009). the stochastic assessment of strength and deformability characteristics for a pyroclastic rock mass. International Journal of Rock Mechanics & Mining Sciences, 46, 613–626.
[30]. Muspratt, M. A. (1972). Numerical statistics in engineering geology. Engineering Geology, 6, 67–78.
[31]. Evans, E., Hastings, N. and Peacock, B. (1993). Statistical Distributions (second ed.). New York: John Wiley & Sons.
[32]. Gumede, H. and Stacey, T.R. (2007). Measurement of typical joint characteristics in South African gold mines and the use of these characteristics in the prediction of rock falls. The Journal of the Southern African Institute of Mining and Metallurgy, 107, 335-344.
[33]. Baecher, G.B. (1983). Statistical analysis of rock mass fracturing. Journal of Mathematical Geology, 15, 329–347.
[34]. Call, R.D., Savely, J.P. and Nicholas, D.E. (1976). Estimation of joint set characteristics from surface mapping data. Monograph on Rock Mechanics Applications in Mining, SME -AIME, 65-73.
[35]. Priest, S.D. and Hudson, J.A. (1976). Discontinuity spacing in rock. International Journal of Rock Mechanics, Mining Sciences & Geomechanics, Abstract, 13, 135-148.
[36]. Wallis, R.F. and King, M.S. (1980). Discontinuity spacings in a crystalline rock. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 17(1), 63-66.
[37]. Snow, D.T. (1970). The frequency and apertures of fractures in rock. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts. 7 (1): 23-30.
[38]. Stacey, T.R. (1989). Potential rockfalls in conventionally supported stopes- a simple probabilistic approach. S. Afr. Inst. Min, Meall. 89 (4): 111-115.
[39]. Kulatilake, P., Chen, J., Teng, J., Shufan, X., & Pan, G. (1996). Discontinuity Geometry Characterization in a Tunnel Close to the Proposed Permanent Shiplock Area of the Three Gorges Dam site in China. International Journal of Rock Mechanics, Mining Science & Geomechanics Abstract. 33 (3): 255-277.
[40]. Sari, M., Karpuz, C. and Ayday, C. (2010). Estimating rock mass properties using Monte Carlo simulation: Ankara andesites. Computers & Geosciences, 36, 959–969.
[41]. Snow, D.T. (1968). ROCK FRACTURE SPACINGS, OPENINGS, AND POROSITIES. Journal of Soil Mechanics & Foundation Div, 94(SM1), 73-91.
[42]. Baecher, G.B., Lanney, N.A. and Einstein, H.H. (1977). Statistical description of rock properties and sampling. 18th U.S. Symp. on Rock Mech, (p. 5C1.1 5C1.8). Colorado.
[43]. Baecher, G.B. and Lanney, N.A. (1978). trace length biases in joint surveys. 19th U.S. Symp. on Rock Mech, 1, pp. 56-65. Nevada.
[44]. Herget G. (1982). Probabilistic slope design for open-pit mines. Rock Mechanics, 12, 163-178.
[45]. Kulatilake, P., Um, J.-g., Wang, M., Richard, F.E. and Narvaiz, J. (2003). stochastic fracture geometry modeling in 3-D including validations for a part of Arrowhead East Tunnel, California, USA. Engineering Geology, 70, 131–155.
[46]. Judy, E. (2002). some effects of weathering on joints in granitic rocks. Catena, 49, 91-109.
[47]. Barton, C.A. and Zoback, M.D. (1990). Self-similar distribution of macroscopic fractures at depth in crystalline rock in the Cajon Pass scientific drill hole, Rock Joints. (B. &. Stephenson, Ed.) Rotterdam: Balkema.
[48]. Brown, E.T. (1981). ISRM suggested methods: rock characterization, testing and monitoring. London: Pergamon.
[49]. Barton, N. (1983). Application of Q-system and index tests to estimate shear strength and Deformability of rock masses. Proceedings of the international symposium on engineering geology and underground construction, (pp. 51–70).
[50]. Mostafa, S., Yasuhiro, M. and Tetsuro, E. (2008). Rock Joint Surfaces Measurement and Analysis of Aperture Distribution under Different Normal and Shear Loading Using GIS. Rock Mechanics and Rock Engineering, 41(2).
[51]. de Dreuzy, J.R., Davy, P. and Bour, O. (2001). Hydraulic properties of two-dimensional random fracture networks following the power law length distribution 1. Effective connectivity. Water Resour Res, 37(8), 2065-2078.
[52]. de Dreuzy, J.R., Davy P.P. and Bour, O. (2001). Hydraulic properties of two-dimensional random fracture network following a power law length distribution 2. Permeability of networks based on lognormal distribution of aperture. Water Resour Res. 37 (8): 2079-2095.
[53]. Wong T.F., Fredrich J.T. and Gwanmesia G.D. (1989). Crack aperture statistics and pore space fractal geometry of Westerly Granite and Rutland Quartzite: Implication for elastic contact model of rock compressibility. Geophys Res, Vol. 94, No. B4, pp. 10,267-10,278.
[54]. Barton, C.A. and Zoback, M.D. (1992). Self-affine distribution and properties of macroscopic fractures at depth in crystalline rock in the Cajon Pass scientific drill hole. Geophys Res, 97(B4), 5181-5200.
[55]. Clark, M.B., Brantley, S.L. and Fisher, D.M. (1995). Power-law vein-thickness distributions and positive feedback in vein growth. Geology. 23 (11): 975–978.
[56]. Fisher, D.M., Brantley, S.L., Everett, M. and Dzvonik, J. (1995). Cubic fluid flow through a regionally extensive fracture network within the Kodiak accretionary prism. Geophys Res, 100(B7), 12881-12894.
[57]. Belfield, W.C. and Sovich, J. (1995). Fractures statistics from horizontal welbores. Can Pet Technology, 34, 47-50.
[58]. Marrett, R. (1996). Aggregate properties of fracture populations. Struct Geol, 18(2-3), 169-178.
[59]. Gale, J.E. (1987). Comparison of coupled fracture deformation and fluid flow models with direct measurements of fracture pore structure and stress-flow properties. In Farmer/Daemen/Desai/Glass/Neuman (Ed.), 28th US Rock Mech Symp, (pp. 1213-1222). Tucson.
[60]. Dverstop, B. and Andersson, J. (1989). Application of the discrete fracture network concept with field data: Possibilities of model calibration and validation. Water Resour Res, 25, 540-550.
[61]. Cacas, M. C., Ledoux, E., de Marsily, G., Tillie, B., Barbreau, A., Durand, E., Peaudecerf, P. (1990). Modeling fracture flow with a stochastic discrete fracture network: Calibration and validation 1. The flow model. Water Resour Res. 26 (3): 479-489.
[62]. Hakami, E. and Barton, N. (1990). Aperture measurements and flow experiments using transparent replicas of rock joints. In S. O. Barton N (Ed.), Int Symp Rock Joints (pp. 383-390). Balkema: Rotterdam.
[63]. Iwano, M. and Einstein, H.H. (1993). Stochastic analysis of surface roughness, aperture and flow in a single fracture. Int Symp EUROCK ’93, (pp. 135-141). Lisbon.
[64]. Johns, R.A., Steude, j.S., Castanier, L.M. and Roberts, P.V. (1993). Nondestructive measurements of fracture aperture in crystalline rock cores using X-ray computed tomography. Geophys Res. 98 (B2): 1889-1900., pp. 1889-1900.
[65]. Hakami, E. and Larsson, E. (1996). Aperture Measurements and Flow Experiments on a Single Natural Fracture. Int J Rock Mech. Min Sci & Geomech Abstr. 33 (4): 395-404.
[66]. Pyrak-Nolte, L.J., Montemagno, C.D. and Nolte, D.D. (1997). Volumetric imaging of aperture distributions in connected fracture networks. Geophy Res Lett. 24 (18): 2343-2346.
[67]. Oron, A. P., & Berkowitz, B. (2001). Flow in rock fractures: The local cubic law assumption re-examined. Water Resour Res, 37(8), 2079-2095.
[68]. Bertels, S.P., DiCarlo, D.A. and Blunt, M.J. (2001). Measurement of aperture distribution, capillary pressure, relative permeability, and in-situ saturation in a rock fracture using computed tomography scanning. Water Resour Res. 37 (3): 649-662.
[69]. Priest, S.D. and Hudson, J.A. (1976). Discontinuity spacing in rock. International Journal of Rock Mechanics, Mining Sciences & Geomechanics, Abstract, 13, 135-148.
[70]. Priest, S.D. and Hudson, J.A. (1981). Estimation of discontinuity spacing and trace length using scanline surveys. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 18(3), 183-197.
[71]. Hudson, J.A. and Priest, S.D. (1983). Discontinuity frequency in rock masses. International Journal of Rock Mechanics, Mining Sciences & Geomechanics, Abstract. 20 (2): 73-89.
[72]. Einstein, H.H. and Baecher, G.B. (1983). probabilistic and statistical methods in engineering geology. Rock mechanics and rock engineering, 16, 39-72.
[73]. Dershowitz, W.S. and Einstein, H.H. (1988). Characterizing rock joint geometry with joint system models. Rock mechanics and rock engineering, 21, 21-51.
[74]. Hakami, E. (1995). Aperture distribution of rock fractures. PhD thesis, Division of Engineering, Royal Institute of Technology, Department of Civil and Environmental Engineering, Stockholm, Sweden.
[75]. Palmstrom, A. (1995). A rock mass characterization system for rock engineering purposes. Norway: Oslo University.
[76]. Baecher G., Lanney N. and Einstein H., (1977b). Statistical descriptions of rock properties and sampling. in 19th U.S. national symposium on rock mechanics, Keystone, Colorado.
[77]. Zadhesh J., Jalali S.-M.E. and Ramazanzadeh A., (2013). Estimation of joint trace length probability distribution function in igneous, sedimentary and metamorphic rocks. Arabian Journal of Geosciences, Vols. DOI 10.1007/s12517-013-0861-1.
[78]. Weiss M., (2008). Techniques for estimating fracture size: A comparison of methods. International Journal of Rock Mechanics and Mining Sciences, Vol. 45, p. 460–466.
[79]. Warburton P.M., (1980). A Stereological Interpretation of Joint Trace Data. International Journal of Rock Mechanics and Mining Sciences, Vol. 17, pp. 181-190.
[80]. Barton, C.M. (1978). Analysis of joint traces. 19th Symp. Rock Mech. Am. Inst. Min. Eng, (pp. 39-40).
[81]. Bridge, M.C. (1976). Presentation of Fracture Data for Rock Mechanics. 2nd Australian-New Zealand Conference on Geomechanics, (pp. 144-148). Brisbane.
[82]. Park, Y.J., de Dreuzy, J.R., Lee KK, K.K. and Berkowitz, B. (2001). Transport and intersection mixing in random fracture networks with power law length distributions. Water Resour Res. 37 (10): 2493-2502.
[83]. Song, J.J. and Lee, C.I. (2001). Estimation of joint length distribution using window sampling. International Journal of Rock Mechanics & Mining Sciences, 38, 519–528.
[84]. Call, R.D., Savely, J.P. and Nicholas, D.E. (1976). Estimation of joint set characteristics from surface mapping data. Monograph on Rock Mechanics Applications in Mining, SME -AIME, 65-73.
[85]. ISRM., (1978). Commission on Standardization of Laboratory and Field Tests: Suggested methods for the quantitative description of discontinuities in rock masses. International Journal of Rock Mechanics & Mining Sciences and Geomechanics Abstract, Vol. 15, pp. 319-368.
[86]. Burges, C. (1998). A tutorial on support vector machines for pattern recognition. Data Mining Knowledge Discovery. 2 (2): 121-167.
[87]. Christiani, V. and Shawe -Taylor, J. (2002). An introduction to support vector machines. Cambridge University Press.
[88]. Vapink, V. (1995). The nature of statistical learning theory. New York: Springer.
[89]. Vapink, V. (1998). Statistical learning theory. New York: Wiley.
[90]. Vapink, V. (1999). The Nature of Statistical Learning Theory. New York, USA: Springer-Verlag.
[91]. Gregory, B.B. (1980). Progressively Censored Sampling of Rock Joint Traces. Mathematic Geology, 12(1).
[92]. Priest, S.D. (1993). Discontinuity analysis for rock engineering. London: Chapman & Hall.
[93]. Christianzangerl, Simon, L. and Erik, E. (2006). Structure, geometry and formation of brittle discontinuities in anisotropic crystalline rocks of the Central Gotthard Massif, Switzerland, Eclogae geol. Helv. 99, 271-290.
[94]. Hameren V.A. (2006). Goodness-of-fit tests in many dimensions. Nuclear Instruments, and Methods in Physics Research A, Vol. 559, p. 167 – 171.
[95]. D'Agostino, R. and Stephens, M. (1986). Mechanics of Particulate Matter-A Probabilistic Approach. New York: Marcel Dekker.
[96]. Bour, O. and Davy, P. (1997). Connectivity of random fault networks following a power law fault length distribution. Water Resour Res. 33 (7): 1567-1583.
[97]. Margolin, G., Berkowitz, B. and Scher, H. (1998). Structure, flow, and generalized conductivity scaling in fracture networks. Water Resour Res. 34 (9): 2103-2121.
[98]. de Dreuzy, J.R., Davy, P. and Bour, O. (2002). Hydraulic properties of two-dimensional random fracture networks following power-law distributions of length and aperture. Water Resour Res, 38(12), 1276, doi:10.1029/2001WR001009.
[99]. Wyllie, D.C. (1999). Foundations on Rock (2nd ed.). London, UK: Taylor and Francis.
[100]. Sharifzadeh, M., Mitani, Y., Esaki, T., & Urakawa, F. (2004). An investigation of joint aperture distribution using precise surface asperities measurement and GIS data processing. In K. Ohnishi and Aoki (Ed.), 3rd Int Asian Rock Mech Symp, (pp. 165-171).
[101]. Bonnet, E., Bour, O., Odling, N.E., Davy, P., Main, I., Cowie, P. and Berkowitz, B. (2001). Scaling of fracture systems in geological media. Rev Geophys. 39 (3): 347–383.
[102]. Barton, N.R. (1973). Review of a new shear strength criterion for rock joints. Engineering Geology, 7, 287–322.
[103]. Warburton, P.M. (1980b). Stereological Interpretation of Joint Trace Data: Influence of Joint Shape and Implications for Geological Surveys. International Journal of Rock Mechanics and Mining Sciences, 17, 305-316.
[104]. Baecher, G., Lanney, N. and Einstein, H. (1977a). Trace length bias in joint surveys. 20th U.S. National Symposium on rock mechanics. Tahoe, Nevada.
[105]. Hakami, E., Einstein, H.H., Gentier, S. and Iwano, M. (1995). Characterization of fracture apertures - Methods and parameters. 8th Int Cong Rock Mech, (pp. 751-754). Tokyo.
)