Abu El Ghar, M.
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Afzal, P.
Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]
Alamdari, S.
Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]
Alipenhani, B.
Determination of Caving Hydraulic Radius of Rock Mass in Block Caving Method using Numerical Modeling and Multivariate Regression [Volume 13, Issue 1, 2022, Pages 217-233]
Aliyari, F.
Application of Fuzzy Gamma Operator to Generate Mineral Prospectivity Mapping for Cu-Mo Porphyry Deposits (Case Study: Kighal-Bourmolk Area, Northwestern Iran) [Volume 13, Issue 1, 2022, Pages 129-153]
Amiri Hossaini, M.
Estimation of In-Situ Block Size Distribution in Jointed Rock Masses using Combined Photogrammetry and Discrete Fracture Network [Volume 13, Issue 1, 2022, Pages 175-184]
Amirkhani Shiraz, F.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Arian, M. A.
Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]
Aryafar, A.
Cadmium Oxide Nanoparticles as A Novel Photo-Catalyst for Degradation of Ciprofloxacin Antibiotic in Aqueous Media [Volume 13, Issue 1, 2022, Pages 155-164]
Asgari, K.
Influence of Single Tunnel and Twin Tunnel on Collapse Pattern and Maximum Ground Movement [Volume 13, Issue 1, 2022, Pages 117-128]
Ataei, M.
Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]
B
Badri, M.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Bahaaddini, M.
Estimation of In-Situ Block Size Distribution in Jointed Rock Masses using Combined Photogrammetry and Discrete Fracture Network [Volume 13, Issue 1, 2022, Pages 175-184]
Bahaaddini, M.
Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]
Bahrami, A.R.
Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods [Volume 13, Issue 1, 2022, Pages 269-280]
Bakhshandeh Amnieh, H.
Determination of Caving Hydraulic Radius of Rock Mass in Block Caving Method using Numerical Modeling and Multivariate Regression [Volume 13, Issue 1, 2022, Pages 217-233]
Basiri, M.H.
Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]
Başpınar Tuncay, E.
A Probability-Based Evaluation on Andesites for Their Use as Cladding Stone [Volume 13, Issue 1, 2022, Pages 1-13]
Benzakour, I.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Boussetta, A.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
C
Careddu, N.
Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]
D
Dachri, K.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Diab, M.
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Dolatshahi, A.R.
Effect of Acid Rain on Physical and Mechanical Properties of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 1, 2022, Pages 185-200]
Doulati Ardejani, F.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Doulati Ardejani, Sh.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
E
El Amari, Kh.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Esmaeilzadeh, A.
Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]
Esmailzadeh, M.
Application of Fuzzy Gamma Operator to Generate Mineral Prospectivity Mapping for Cu-Mo Porphyry Deposits (Case Study: Kighal-Bourmolk Area, Northwestern Iran) [Volume 13, Issue 1, 2022, Pages 129-153]
F
Faqir, H.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Fattahi, H.
Reliability Analysis of Surface Settlement caused by Mechanized Tunneling-a Case Study [Volume 13, Issue 1, 2022, Pages 201-216]
Fawzy, M. Mohamed
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
G
Ghaedi Ghalini, M.
Estimation of In-Situ Block Size Distribution in Jointed Rock Masses using Combined Photogrammetry and Discrete Fracture Network [Volume 13, Issue 1, 2022, Pages 175-184]
H
Hebblewhite, B.
Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]
Hibti, M.
Mineralogical approach-A tool for geometallurgical prediction of Tizert copper deposit (Ighrem inlier, Anti-Atlas, Morocco) [Volume 13, Issue 1, 2022, Pages 33-51]
Honarmand, M.
Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]
Honarmand, M.
Cadmium Oxide Nanoparticles as A Novel Photo-Catalyst for Degradation of Ciprofloxacin Antibiotic in Aqueous Media [Volume 13, Issue 1, 2022, Pages 155-164]
Hosseini, M.
Effect of Acid Rain on Physical and Mechanical Properties of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 1, 2022, Pages 185-200]
Hosseini, M.
CFD-based Modeling of Sarin Gas Dispersion in a Subway Station–A Hypothetical Scenario [Volume 13, Issue 1, 2022, Pages 235-251]
I
Imamalipour, A.
Application of Fuzzy Gamma Operator to Generate Mineral Prospectivity Mapping for Cu-Mo Porphyry Deposits (Case Study: Kighal-Bourmolk Area, Northwestern Iran) [Volume 13, Issue 1, 2022, Pages 129-153]
J
Jafari, M.R.
Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]
Jiryaee, F.
Reliability Analysis of Surface Settlement caused by Mechanized Tunneling-a Case Study [Volume 13, Issue 1, 2022, Pages 201-216]
Jodeiri Shokri, B.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
K
Khosravi, M. H.
Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]
Koken, E.
A Probability-Based Evaluation on Andesites for Their Use as Cladding Stone [Volume 13, Issue 1, 2022, Pages 1-13]
M
Madani, H.
CFD-based Modeling of Sarin Gas Dispersion in a Subway Station–A Hypothetical Scenario [Volume 13, Issue 1, 2022, Pages 235-251]
Maghsoudy, S.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Mahjoore, M.
Cadmium Oxide Nanoparticles as A Novel Photo-Catalyst for Degradation of Ciprofloxacin Antibiotic in Aqueous Media [Volume 13, Issue 1, 2022, Pages 155-164]
Majdi, A.
Determination of Caving Hydraulic Radius of Rock Mass in Block Caving Method using Numerical Modeling and Multivariate Regression [Volume 13, Issue 1, 2022, Pages 217-233]
Majdi, A.
Determining Probability Distribution Functions of Rock Joint Geometric Properties [Volume 13, Issue 1, 2022, Pages 281-308]
Mikaeil, R.
Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]
Mirsepahvand, F.
Identification of Alteration Zones using ASTER Data for Metallic Mineralization in Ahar region, NW Iran [Volume 13, Issue 1, 2022, Pages 309-324]
Mirzaei, S.
Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]
Moeini, A.
The Effect of Operating Parameters on Bromine Extraction from Desalination Plant Discharge [Volume 13, Issue 1, 2022, Pages 165-174]
Mohamed El Shafey, A. H.
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Mohamed Gaafar, I.
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Mohammadnejad, S.
The Effect of Operating Parameters on Bromine Extraction from Desalination Plant Discharge [Volume 13, Issue 1, 2022, Pages 165-174]
Mousavi, A.
Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]
Rajaee, A.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Ramezani, E.
Effect of Acid Rain on Physical and Mechanical Properties of Concrete Containing Micro-Silica and Limestone Powder [Volume 13, Issue 1, 2022, Pages 185-200]
S
Saffari, A.
Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]
Samani, R.
Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods [Volume 13, Issue 1, 2022, Pages 269-280]
Sarfaraz, H.
Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods [Volume 13, Issue 1, 2022, Pages 269-280]
Sarfarazi, V.
Influence of Single Tunnel and Twin Tunnel on Collapse Pattern and Maximum Ground Movement [Volume 13, Issue 1, 2022, Pages 117-128]
Serati, M.
Rock Joint Micro-Scale Surface Roughness Characterisation using Photogrammetry Method [Volume 13, Issue 1, 2022, Pages 87-100]
Shafaei, F.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Shaffiee Haghshenas, S.
Statistical Study to Evaluate Performance of Cutting Machine in Dimension Stone Cutting Process [Volume 13, Issue 1, 2022, Pages 53-67]
Shahhosseini, M.
Developing a Conceptual Framework of Green Mining Strategy in Coal Mines: Integrating Socio-economic, Health, and Environmental Factors [Volume 13, Issue 1, 2022, Pages 101-115]
Shahriar, K.
CFD-based Modeling of Sarin Gas Dispersion in a Subway Station–A Hypothetical Scenario [Volume 13, Issue 1, 2022, Pages 235-251]
Shahriari, H.
Application of Drone-Based Data for Directing Exploration Activities and Estimating Resources in Emperador Marble Quarry, Kerman Province, Iran [Volume 13, Issue 1, 2022, Pages 253-267]
Soofastaei, A.
Application of Machine Learning Techniques to Predict Haul Truck Fuel Consumption in Open-Pit Mines [Volume 13, Issue 1, 2022, Pages 69-85]
W
Wageh Hussein, A.
Potentiality of Physical Upgrading for Valuable Heavy Minerals from Sermatai Area, Egypt [Volume 13, Issue 1, 2022, Pages 15-32]
Z
Zadhesh, J.
Determining Probability Distribution Functions of Rock Joint Geometric Properties [Volume 13, Issue 1, 2022, Pages 281-308]