Volume 15 (2024)
Volume 14 (2023)
Volume 13 (2022)
Volume 12 (2021)
Volume 11 (2020)
Volume 10 (2019)
Volume 9 (2018)
Volume 8 (2017)
Volume 7 (2016)
Volume 6 (2015)
Volume 5 (2014)
Volume 4 (2013)
Volume 2 (2011)
Volume 1 (2010)
Original Research Paper
Environmental Impact Assessment of Coal Washing Plant (Alborz- Sharghi –Iran)

Reza Ghaedrahmati; F Doulati Ardejani

Volume 3, Issue 2 , July 2012, Pages 69-77

https://doi.org/10.22044/jme.2012.73

Abstract
  This paper utilises the modified Folchi method to assess the environmental impact of coal washing plant, Alborz Sharghi, North-east Iran. In this study, the number of factors designed in the method was slightly modified by focusing on the environmental impact of coal washing operations. In addition, ...  Read More

Case Study
Implementation of flotation and gravity separation, to process Changarzeh sulfide-oxide lead ore

A Atrafi; H Hodjatoleslami; Mohammad Noaparast; Z Shafaei; A Ghorbani

Volume 3, Issue 2 , July 2012, Pages 79-87

https://doi.org/10.22044/jme.2012.45

Abstract
  This study aimed to explore concentration of a low grade sulfide-oxide lead-zinc sample containing 2.3% Pb, 1.91% Zn taken from Changarzeh mine, South Natanz, Iran. The effects of different parameters such as type and dosage of collector, milling retention time, dosage of sodium sulfur and its preparation ...  Read More

Case Study
Evaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2)

Omid Frough; Seyed Rahman Torabi; Majid Tajik

Volume 3, Issue 2 , July 2012, Pages 89-98

https://doi.org/10.22044/jme.2012.86

Abstract
  Successful application of a TBM in a project requires investigating both the ground conditions and the machine and backup system design features. Prediction of the machine performance is very important as it has a big effect on the duration of the project and the costs. In this respect, both penetration ...  Read More

Case Study
Collectorless flotation of Chalcocite by controlling redox potential

sima razmjouee; mahmood abdollahy; seyed mohammad javad koleini

Volume 3, Issue 2 , July 2012, Pages 99-102

https://doi.org/10.22044/jme.2012.87

Abstract
  Using microflotation method, this study explored the collectorless flotation of Chalcocite and its dependence on the redox potential of pulp . Electrochemical studies were performed by cyclic voltammetry  in specific potential ranges and at different pH values. The results show that significant ...  Read More

Case Study
A new approach to define batch settling curves for analyzing the sedimentation characteristics

Mohammad Reza Garmsiri; Hassan Haji Amin Shirazi

Volume 3, Issue 2 , July 2012, Pages 103-111

https://doi.org/10.22044/jme.2012.88

Abstract
  The results of batch settling tests (BST) are used to investigate settling behavior of solids suspension, which contribute to sizing thickeners. Conventional methods in analyzing BST on the basis of visual and graphical procedures lead to sub-optimally sized and selected thickeners. A computational approach ...  Read More

Case Study
Wellbore associated problems due to gas injection into non-horizontal structures

A Chamani; Vamegh Rasouli

Volume 3, Issue 2 , July 2012, Pages 113-119

https://doi.org/10.22044/jme.2013.89

Abstract
  The rapid growth in natural gas consumption has increased the need for gas storage, in particular in the form of injection into depleted reservoirs. Also, CO2 sequestration into the depleted reservoirs has attracted a large attention recently. However, it is important to ensure that the injection pressure ...  Read More

Case Study
Identification of groundwater contamination sources of Lakan lead and zinc mine, Khomain, Iran

Feridon ghadimi; Mohammad Ghomi; Abdolmotaleb Hajati

Volume 3, Issue 2 , July 2012, Pages 121-134

https://doi.org/10.22044/jme.2013.96

Abstract
  Altogether 20 groundwater samples were collected around the Lakan Pb and Zn mine in Iran. Samples were analyzed for 8 constituents including Fe, Pb, Hg, Mn, Zn, CN, SO4 and Cl using standard method. The results show that the average concentrations of constituents were 0.01, 0.60, 0.10, 0.01, 0.40, 35, ...  Read More