H. Haghgouei; A. Reza Kargar; M. H. Khosravi; M. Amini
Abstract
In many engineering constructions, the foundations should be built adjacent to each other. Therefore, the effect of interfering of close foundations should be considered in the design stage. In this research work, the effect of interference of closely separated foundations resting on a slope on the elastic ...
Read More
In many engineering constructions, the foundations should be built adjacent to each other. Therefore, the effect of interfering of close foundations should be considered in the design stage. In this research work, the effect of interference of closely separated foundations resting on a slope on the elastic settlement is investigated by considering a semi-analytical solution. The distribution of stress due to the footing pressure in the slope is computed by a proposed Airy stress function, and then by employing the finite difference scheme, the displacement of the footings is calculated. The results obtained show that by increasing the distance between the foundations, the interference influence on the ratio of settlement will be diminished. However, this behavior is highly linked to the slope characteristics. For a slope with a height of 10 times of footing width, beyond an S/B ratio larger than 10, the effect of interference is not tangible, and the footings behave like an isolated foundation. By decreasing the slope height, this behavior will occur at a lower S/B.
Rock Mechanics
S. Ali Madadi; A. Majdi; M. H. Khosravi; A.R. Kargar
Abstract
Fracture mechanics is a vital component involved in studying the exact behavior of rock materials. Detection and assessment of the behavior of rock joints injected by grout plays an important role in numerical modelling in rock mechanic projects. The importance of mechanisms associated with initiation ...
Read More
Fracture mechanics is a vital component involved in studying the exact behavior of rock materials. Detection and assessment of the behavior of rock joints injected by grout plays an important role in numerical modelling in rock mechanic projects. The importance of mechanisms associated with initiation and propagation of cracks due to hydraulic fracturing has led to a considerable interest in investigation and analysis of this phenomenon. In this work, the process of propagation of cracks on the wall of boreholes, drilled in single and bi-material structures, was simulated in ABAQUS software employing the extended finite element method. The energy method was implemented to obtain the stress intensity factor and energy release rate through applying J integral around the crack tip. The method was applied to two rock types, diorite and granite at the Chadormalu iron mine located in the central part of Iran. It was concluded that assuming the same geometry, the possibility of crack propagation at the boundary between two materials was more than the single material medium. Therefore, in dealing with a bi-material medium, if the purpose is to measure the in situ stresses, the measurement should not be performed on the boundary between the two materials.
