Kashitij Guleria; Ravi Kumar Sharma
Abstract
This paper discusses the applications of industrial waste like waste foundry sand (10%, 20%, 30%, and 40%) and calcium carbide residue (3%, 6%, 9%, and 12%) blended with polypropylene fibre (0.25%, 0.50%, 0.75%, and 1%) for soil stabilization. The purpose of this study is to develop a composite of clayey ...
Read More
This paper discusses the applications of industrial waste like waste foundry sand (10%, 20%, 30%, and 40%) and calcium carbide residue (3%, 6%, 9%, and 12%) blended with polypropylene fibre (0.25%, 0.50%, 0.75%, and 1%) for soil stabilization. The purpose of this study is to develop a composite of clayey soil mixed with different additives, so it can be used for improving the geotechnical properties of the clayey soil. Multiple tests are conducted including differential free swell, Atterberg's limits test, compaction tests, unconfined compression test (UCS), and California-bearing ratio test (CBR) on clay soil individually and in different combinations and proportions with additive mixed with each other. The optimum percentage for the additives is found by performing differential free swell index and Atterberg limits test. The results demonstrate that the inclusion of additives in the clayey soil decreases the differential free swell and plasticity index of the composite but raises the composite UCS and CBR values. The maximum increase in the UCS and CBR values is obtained for optimum combination of C:PP:WFS:CC::76.25:0.75:20:3. Based on the CBR values, the thickness of flexible pavement is designed using the IITPAVE software. The results of the software analysis show a reduction in the pavement thickness for various values of commercial vehicles per day (1000, 2000, and 5000) for all combinations. The maximum reduction in layer thickness and construction costs is noticed for C:PP:WFS:CC:76.25:0.75:20:3. To further examine the improvement in the geotechnical properties of soil, calcium carbide residue, and waste foundry sand can be blended with nano-additives for potential uses.
Vivek Sharma; Pardeep Kumar; Ravi Kumar Kumar Sharma
Abstract
Himachal Pradesh state is located in seismically active western Himalayas (India) and its seven districts are in seismic zone V and other in zone IV as per the seismic code of India. Ninety% area of Hamirpur district, the studied area, lies in zone V. Peak ground acceleration (PGA) is one of the most ...
Read More
Himachal Pradesh state is located in seismically active western Himalayas (India) and its seven districts are in seismic zone V and other in zone IV as per the seismic code of India. Ninety% area of Hamirpur district, the studied area, lies in zone V. Peak ground acceleration (PGA) is one of the most important seismic response parameters in structural seismic design, largely influenced by the sub-soil and input seismic motion characteristics. In the present work, the primary objective is to identify the areas in the district that are prone to amplification of peak ground acceleration and can be delineated for infrastructural planning. Peak ground acceleration is one of the most important parameters used in seismic design of the structures. It is estimated using the computer programme ProShake, wherein the soil parameters from 181 borehole profiles up to 30 m depth and software in-built standard earthquake input motions of magnitude 6.9, 7.0, and 7.2 used as the input parameters. The output peak ground acceleration range from 0.24 g to 0.72 g at the ground surface and from 0.21 g to 0.54 g at a depth of 10 m. There is an attenuation of peak ground acceleration at 30 m depth. The estimation of peak ground acceleration will play an important role in delineating the starta having higher peak ground acceleration amplification. This information can be effectively used for planning of important infrastructure projects like hospitals, educational institutions, and commercial establishments in an economical way in the studied area.
Akhilesh Kumar; Ravi Kumar Sharma; Vijay Kumar Bansal
Abstract
The GIS-multi-criteria decision analysis (MCDA) techniques are increasingly used in landslide susceptibility mapping for predicting the future hazards, land use planning, and hazard preparedness. Identification of landslide susceptible regions helps in making a strategic plan for future developmental ...
Read More
The GIS-multi-criteria decision analysis (MCDA) techniques are increasingly used in landslide susceptibility mapping for predicting the future hazards, land use planning, and hazard preparedness. Identification of landslide susceptible regions helps in making a strategic plan for future developmental activities in the landslide-prone areas. It enables the integration of different data layers with varying levels of uncertainty. In this work, GIS-MCDA is applied to landslide hazard zonation for the Kullu district in Himachal Pradesh, India. The current work aims to evaluate the performance of the analytical hierarchy process (AHP) for the development of a landslide hazard map. The geographical information system is used for the preparation of the database, analysis, modelling, and results. The ArcGIS 10.0 software is used to integrate the input layers by assigning appropriate weights. Six landslide causal factors are used, whereby the parameters are extracted from an associated spatial database. These factors are evaluated, and then the respective factor weight and class weight are assigned to each one of the associated factors. The developed landslide hazard map is categorized into three risk zones. The current work may be of great assistance to regional planners and decision-makers in deciding on the most suitable risk mitigation measures at the local level to prevent the potential losses and damages from landslides in the region.
Exploration
Vivek Sharma; Ravi Kumar Sharma; Pardeep Kumar
Abstract
In the present work, the empirical correlations between standard penetration test (SPT) N-values versus shear modulus (Gmax), and Peak Ground Acceleration (PGA) amplifications for sub-Himalayan district-Hamirpur, Himachal Pradesh (India) consisting of highly variable soil/rock strata at different ...
Read More
In the present work, the empirical correlations between standard penetration test (SPT) N-values versus shear modulus (Gmax), and Peak Ground Acceleration (PGA) amplifications for sub-Himalayan district-Hamirpur, Himachal Pradesh (India) consisting of highly variable soil/rock strata at different depths and across the terrain are evaluated. In the first stage, the N values obtained from SPTs are conducted in the field at 184 locations covering the studied area. The shear wave velocity for each soil profile of each borehole is calculated using the best available correlation in the literature. Further, the seismic response parameters are evaluated for these values using the ProShake software. Finally, the empirical relationships between maximum shear modulus and SPT value for different soil types are determined along with the ground motion amplifications. The amplification factor for Bhoranj sub-division varies from 1.40 to 2.60 and from 1.28 to 2.30, 1.20 to 2.10, 1.22 to 1.85, and 1.22 to 1.70 for Barsar, Nadaun, Hamirpur, and Sujanpur, respectively. The studied area consists of variable soil strata including clay, silt, sand, conglomerate, sandstone, and mixture thereof. The correlation between shear modulus and N value is coherent with already reported correlations for regular soils. The amplification factor reported for the sites plays an important role in planning infrastructure in the region. The correlations between maximum shear modulus (Gmax) and SPT value for hilly terrain comprising of highly complex geological formations such as mixed soil and fractured rocks presented in the study are not available in the research work carried out earlier.
Gaurav Juneja; Ravi Kumar Sharma
Abstract
This paper presents the numerical analysis of square and circular skirted footings placed on different sands using the PLAXIS 3D software. The numerical analysis is done using the Mohr-coulomb (M-C) yield criteria. The size of the footings is considered as 100 mm for both the square and circular footings. ...
Read More
This paper presents the numerical analysis of square and circular skirted footings placed on different sands using the PLAXIS 3D software. The numerical analysis is done using the Mohr-coulomb (M-C) yield criteria. The size of the footings is considered as 100 mm for both the square and circular footings. The three different friction angles (Ø) of sand 36˚, 40˚, and 42˚ are used to study the effect of sand compactness. The depth of the skirt (h) varies from 0B to 2B (B is the width of the footing). The surface roughness between skirt-sand and footing-sand is considered partially rough and completely rough. The interface friction factor (δ) for a partially rough and fully rough interface is taken as 2/3Ø and Ø. All the tests are conducted by applying a prescribed displacement (s/B) of 20% of the footing size. The results obtained from the present work reveal that the inclusion of structural skirts with the footings appreciably increases the bearing capacity and reduces the settlement of the footing by increasing the skirt depth. The results obtained show that the skirted footing is found to be more effective in loose sand compared to dense sand in increasing the bearing capacity. The numerical analysis results are also verified with the experimental results available in the literature and multiple regression model. This work shows that the prediction of the accuracy of the results is quite good with the experimental results and the generated regression model.
