A. Salimi; M. Ziaii; A. Amiri; M. Hosseinjani Zadeh
Abstract
Remote sensing image analysis can be carried out at the per-pixel (hard) and sub-pixel (soft) scales. The former refers to the purity of image pixels, while the latter refers to the mixed spectra resulting from all objects composing of the image pixels. The spectral unmixing methods have been developed ...
Read More
Remote sensing image analysis can be carried out at the per-pixel (hard) and sub-pixel (soft) scales. The former refers to the purity of image pixels, while the latter refers to the mixed spectra resulting from all objects composing of the image pixels. The spectral unmixing methods have been developed to decompose mixed spectra. Data-driven unmixing algorithms utilize the reference data called training samples and end-members. The performance of algorithms using training samples can be negatively affected by the curse of dimensionality. This problem is usually observed in the hyperspectral image classification, especially when a low number of training samples, compared to the large number of spectral bands of hyperspectral data, are available. An unmixing method that is not highly impressed by the curse of dimensionality is a promising option. Among all the methods used, Support Vector Machine (SVM) is a more robust algorithm used to overcome this problem. In this work, our aim is to evaluate the capability of a regression mode of SVM, namely Support Vector Regression (SVR), for the sub-pixel classification of alteration zones. As a case study, the Hyperion data for the Sarcheshmeh, Darrehzar, and Sereidun districts is used. The main classification steps rely on 20 field samples taken from the Darrehzar area divided into 12 and 8 samples for training and validation, respectively. The accuracy of the sub-pixel maps obtained demonstrate that SVR can be successfully applied in the curse of dimensional conditions, where the size of the training samples (12) is very low compared to the number of spectral bands (165).
B. A. Mert
Abstract
This paper presents the procedures used for determining and defining the tonnage and grade of the coalfields of Kangal basin from the developed GIS-aided block model. In this work, firstly, all the lithological logs of drill holes and chemical analysis data of core in the basin were analyzed with the ...
Read More
This paper presents the procedures used for determining and defining the tonnage and grade of the coalfields of Kangal basin from the developed GIS-aided block model. In this work, firstly, all the lithological logs of drill holes and chemical analysis data of core in the basin were analyzed with the help of geostatistics, and then the digital raster maps of each one of the attributes such as the thickness, calorific value (LCV), ash content (AC%), moisture content (MC%), and surface maps of lignite seams were mapped in GIS environment. In the second stage, quantities of the overburden and resources with different categories were calculated on the basis of field-based quality and volume queries with the help of the digital maps on GIS platform. As a result, it was estimated that the Kalburçayırı field had a tonnage of 116 Mt of lignite with an LCV of 1308 kcal/kg, the Hamal field had a tonnage of 30 Mt of lignite with an LCV of 987 kcal/kg, and the Etyemez field had a tonnage of 48 Mt of lignite with an LCV of 1282 kcal/kg. Also it was estimated that almost 24,278,151 tons of lignite in the Hamal and Etyemez fields had a quality of less than 950 kcal/kg that could be directly fired without the blending process in the power plant. As a consequence, the Hamal and Etyemez fields should go into production as soon as possible and be fired in the power plant after being mixed with the lignite in the Kalburcayırı field so that they can be redounded to economy.
M. R. Azad; A. Kamkar Rouhani; B. Tokhmechi; M. Arashi
Abstract
Upscaling based on the bandwidth of the kernel function is a flexible approach to upscale the data because the cells will be coarse-based on variability. The intensity of the coarsening of cells in this method can be controlled with bandwidth. In a smooth variability region, a large number of cells will ...
Read More
Upscaling based on the bandwidth of the kernel function is a flexible approach to upscale the data because the cells will be coarse-based on variability. The intensity of the coarsening of cells in this method can be controlled with bandwidth. In a smooth variability region, a large number of cells will be merged, and vice versa, they will remain fine with severe variability. Bandwidth variation can be effective in upscaling results. Therefore, determining the optimal bandwidth in this method is essential. For each bandwidth, the upscaled model has a number of upscaled blocks and an upscaling error. Obviously, higher thresholds or bandwidths cause a lower number of upscaled blocks and a higher sum of squares error (SSE). On the other hand, using the smallest bandwidth, the upscaled model will remain in a fine scale, and there will be practically no upscaling. In this work, different approaches are used to determine the optimal bandwidth or threshold for upscaling. Investigation of SSE changes, the intersection of two charts, namely SSE and the number of upscaled block charts, and the changes of SSE values versus bandwidths, are among these approaches. In this particular case, if the goal of upscaling is to minimize the upscaling error, the intersection method will obtain a better result. Conversely, if the purpose of upscaling is computational cost reduction, the SSE variation approach will be more appropriate for the threshold setting.
S. Kumar Jha; P. Warwade; S. Kumar Mahto
Abstract
This work illustrates the impact of excessive mining on the precipitation trends and ground water condition of the Ramgarh district over a period of 12 years (2007-2018). The Landsat 8 and Landsat TM- 5 data is processed under Arc-GIS in order to compare the LULC maps. Out of 7 classified classes, the ...
Read More
This work illustrates the impact of excessive mining on the precipitation trends and ground water condition of the Ramgarh district over a period of 12 years (2007-2018). The Landsat 8 and Landsat TM- 5 data is processed under Arc-GIS in order to compare the LULC maps. Out of 7 classified classes, the Results obtained indicate the expansion of the mining area, barren land, settlement, and water body by 10.95%, 10.07%, 3.44%, and 0.43%, while a reduction in the forest, fallow, and crop land by 11.24%, 11.31%, and 2.34% respectively. The TRMM 3B43 data is used to trace out the annual precipitation values of 5 selected raster location points through Arc GIS. The annual precipitation under the mining regions (lower Mandu, Ramgarh, Bhurkunda) shows a decreasing trend. The Mann-Kendall test and Sen’s slope estimator method is used in order to evaluate the ground water pattern in the pre- and post-monsoonal conditions. The Mandu block, the densest mining region of the district with the positive Z values of 1.714 and 0.137 in the pre- and post- monsoon period shows a decrease in the ground water level at the rates of 0.103 m/year and 0.017 m/year, respectively. The continuous rise in the mining activities has created an alarming shift of weather pattern and deteriorated ground water table in Ramgarh.
Afrodita Zendelska; Adrijana Trajanova; Mirjana Golomeova; Blagoj Golomeov; Dejan Mirakovski; Nikolinka Doneva; Marija Hadzi-Nikolova
Abstract
The treatment of acid mine drainages is usually based on two basic technologies, active and passive treatment technologies. Whichever acid mine drainage (AMD) treatment method is employed, a neutralizing procedure that raises the water's pH over 7.0 using alkaline agents is required prior to discharge. ...
Read More
The treatment of acid mine drainages is usually based on two basic technologies, active and passive treatment technologies. Whichever acid mine drainage (AMD) treatment method is employed, a neutralizing procedure that raises the water's pH over 7.0 using alkaline agents is required prior to discharge. A comparison of eight different agents (BaCO3, Na2CO3, NaOH, KOH, K2CO3, MgO, CaCO3, and Ba(OH)2) was performed in order to choose the most effective neutralizing agent for acid mine drainage treatment. The experiments were performed using a multi-component synthetic aqueous solution with an initial concentration of 10 mg/L of the Cu, Mn, Zn, Fe, and Pb ions and an initial pH value of 1.9. According to the research, the most effective neutralizing agent for the removal of heavy metals from a multi-component aqueous solution is MgO, while the least effective agent was Na2CO3. The obtained series of effective neutralizing agents for the removal of heavy metals from a multi-component aqueous solution are presented in the work. The effect of the studied concentration of neutralizing agents depends on the neutralizing agents and heavy metals that are used. The percentage of heavy metals removed from aqueous solutions increases along with rising pH values. The consumption of the neutralizing agent decreases as the concentration of the neutralizing agent is increased. In addition, the time taken to achieve pH depends on the agent concentration. In particular, as the concentration of the neutralizing agent increases, the time to reach the pH decreases.
Exploitation
F. Sotoudeh; M. Ataei; R. Kakaie; Y. Pourrahimian
Abstract
In mining projects, all uncertainties associated with a project must be considered to determine the feasibility study. Grade uncertainty is one of the major components of technical uncertainty that affects the variability of the project. Geostatistical simulation, as a reliable approach, is the most ...
Read More
In mining projects, all uncertainties associated with a project must be considered to determine the feasibility study. Grade uncertainty is one of the major components of technical uncertainty that affects the variability of the project. Geostatistical simulation, as a reliable approach, is the most widely used method to quantify risk analysis to overcome the drawbacks of the estimation methods used for an entire ore body. In this work, all the algorithms developed by numerous researchers for optimization of the underground stope layout are reviewed. After that, a computer program called stope layout optimizer 3D is developed based on a previously proposed heuristic algorithm in order to incorporate the influence of grade variability in the final stope layout. Utilizing the sequential gaussian conditional simulation, 50 simulations and a kriging model are constructed for an underground copper vein deposit situated in the southwest of Iran, and the final stope layout is carried out separately. It can be observed that geostatistical simulation can effectively cope with the weakness of the kriging model. The final results obtained show that the frequency of economic value for all realizations varies between 6.7 M$ and 30.7 M$. This range of variation helps designers to make a better and lower risk decision under different conditions.
Avinash Chandan; Abhishek Sharma
Abstract
Due to disposal concerns, an enormous quantity of personal protective equipment (PPE) waste from the COVID-19 pandemic constituted a severe health and environmental risk. During the pandemic, the usage of protective suits increased dramatically raising concerns about how to dispose of them to safeguard ...
Read More
Due to disposal concerns, an enormous quantity of personal protective equipment (PPE) waste from the COVID-19 pandemic constituted a severe health and environmental risk. During the pandemic, the usage of protective suits increased dramatically raising concerns about how to dispose of them to safeguard the environment. This research work uses shredded face masks (SFM) to stabilise clayey soil for sub-grade usage. Shredded face masks are added to clayey soil to investigate consistency limits, compaction characteristics, unconfined compressive strength (UCS), and California bearing ratio (CBR). Laboratory experiments demonstrate that clayey soil geo-technical characteristics such differential free swell, consistency limits, UCS, and CBR values have improved. Based on the CBR results, the IITPAVE software is used to design flexible pavement thickness, which was reduced for various commercial vehicles per day for all combinations. Cost analysis is also done to determine the total cost for a 1000-meter stretch. The results show that addition of SFM to clayey soils strengthen the geo-technical properties of clayey soil as the UCS values increase for all curing periods of 3, 7, and 28 days with a maximum improvement of 64% for 28 days curing for 1% SFM content. Also, the CBR value is found to be increased from 1.96% to 6.72%.
B. Tokhmechi; M. Rabiei; H. Azizi; V. Rasouli
Abstract
A complete and accurate analysis of the complex spatial structure of heterogeneous hydrocarbon reservoirs requires detailed geological models, i.e. fine resolution models. Due to the high computational cost of simulating such models, single resolution up-scaling techniques are commonly used to reduce ...
Read More
A complete and accurate analysis of the complex spatial structure of heterogeneous hydrocarbon reservoirs requires detailed geological models, i.e. fine resolution models. Due to the high computational cost of simulating such models, single resolution up-scaling techniques are commonly used to reduce the volume of the simulated models at the expense of losing the precision. Several multi-scale techniques have also been developed for simulating heterogeneous reservoirs including those in which a limited number of blocks down-scale, i.e. splitting coarse blocks into fine cells around the well-zones in the case of simulation of hydraulic fracturing. In these cases, locally computed basis functions are employed to construct a global solver at a coarse-scale such as wavelet- and kernel-based up-scaling techniques. In this paper, a novel/robust 2D block-ordering system is presented, which enables solving multi-resolution up-scaling fluid flow simulations. The results will be described for a simple model, and fluid flow equations will be developed in order to show the structure of transmissibility matrix. It is confirmed that with a developed block-ordering system not only the accuracy of history match increases but also the CPU time decreases.
Environment
Debasmita Basu; Smriti Mishra
Abstract
This study presents a comprehensive analysis of community perceptions regarding the impacts of reclamation strategies for abandoned coal mines in India, with a specific focus on the Manikpur Coal Mine. Through a structured survey administered to residents in the vicinity of the mine, the research investigates ...
Read More
This study presents a comprehensive analysis of community perceptions regarding the impacts of reclamation strategies for abandoned coal mines in India, with a specific focus on the Manikpur Coal Mine. Through a structured survey administered to residents in the vicinity of the mine, the research investigates the economic, socio-cultural, and environmental impacts of reclamation efforts. Utilizing Structural Equation Modeling (SEM), the study identifies key factors influencing community perceptions, including the perceived benefits of reclamation, levels of community involvement, and overall satisfaction with mining operations. The findings reveal significant relationships among these factors, such as the positive influence of reclamation availability/requirement (path coefficient = 0.633) on satisfaction and the negative impact of involvement on satisfaction (-0.805). Indirect effects highlight the interplay between constructs, with experience positively influencing involvement (0.673) and satisfaction (0.162) while negatively affecting reclamation availability/requirement (-0.194). Variations in latent variable scores for satisfaction (-1.63 to 3.031) and reclamation availability/requirement (-1.42 to 1.903) underscore the diverse respondent experiences. These insights emphasize the importance of effective community engagement and tailored reclamation strategies. Policy recommendations are provided to enhance the sustainability and effectiveness of reclamation efforts, emphasizing the need for holistic approaches that integrate economic viability, socio-cultural acceptance, and environmental sustainability. The study contributes to the field of mine reclamation by offering valuable insights into resident perceptions and practical guidelines for improving reclamation practices in mining-affected areas.
Environment
Aditi Nag; Smriti Mishra
Abstract
This review paper delves into the burgeoning cultural phenomenon of dark tourism, specifically exploring its connection with Mining Heritage Towns (MHTs). The paper navigates the intricate interplay between tourism competitiveness and ethical considerations in these sites laden with historical trauma ...
Read More
This review paper delves into the burgeoning cultural phenomenon of dark tourism, specifically exploring its connection with Mining Heritage Towns (MHTs). The paper navigates the intricate interplay between tourism competitiveness and ethical considerations in these sites laden with historical trauma through a meticulous analysis of existing literature, case studies, and ethical frameworks. Dark tourism, characterised by exploring locations associated with tragedy, has emerged as a global trend, prompting a critical examination of its economic, cultural, and ethical dimensions within mining heritage contexts. Drawing on a wide array of sources, this comprehensive review elucidates the challenges confronting managers of heritage sites, shedding light on the complex ethical dilemmas they face. The paper comprehensively analyses the complex relationship between tourism competitiveness and ethical practices. It critically evaluates the impact of dark tourism on MHTs' economic landscape, explores its cultural implications, and delves into the ethical complexities of such visits, enriching academic discourse and offering valuable guidance for practitioners and policy-makers. The study enhances understanding of dark tourism's role in MHTs and advocates for sustainable tourism development, emphasising ethical considerations in shaping the future of these unique and historically significant sites.
O.E. Ifelola
Abstract
Metals are ubiquitous within the earth crust. However, the exceptional high-level concentration of heavy metals in the soil due to natural or anthropogenic activities and the chemical forms in which they exist determine the level of risk they portend to the environment. This work was aimed at determining ...
Read More
Metals are ubiquitous within the earth crust. However, the exceptional high-level concentration of heavy metals in the soil due to natural or anthropogenic activities and the chemical forms in which they exist determine the level of risk they portend to the environment. This work was aimed at determining the background level of the presence of seven priority toxic metals (Cr, Ni, Pb, As, Cd, Cu, Zn) in the chemical phases of the overburden topsoil of a bituminous deposit prior to mining activities through the speciation analysis. The grab samples of overburden topsoil were initially obtained and homogenized to composites based on locations for the subsequent sequential extraction procedure (SEP). The specific physico-chemical properties of the sampled soils were simultaneously determined to complement the SEP inferential analysis. The results obtained showed that most metals were spatially bounded to the Fe-Mn oxides (reducible phase) followed by the organic (oxidizable) and the carbonates phases, respectively. Fractionally, the dominant soil texture in the studied area was sand (55.45%); however, the colloidal organic matter and Fe-Mn oxide phases played the dominant roles in the sorption activities of the selected metals. The soil chemical phase with the least metal pool was the exchangeable (water/salt) soluble fraction. The overall assessment revealed that the geogenic heavy metals in the topsoil posed no threats since a marginal fraction of the metals existed in the bio-available form in non-toxic concentrations in the order of Pb > Zn > Cu, while the potential mobility of metals showed that Zn was preferentially higher than Pb and Cu, respectively.
S. Hryhorovych Nehrii; T. Oleksandrivna Nehrii; H. Viktorivna Piskurska; E. Viktorovych Fesenko; Y. Yevhenovych Pavlov; A. Mykolaiovych Surzhenko
Abstract
In this work, we focus on the technology of stabilizing roof rocks by constructing separate rock supports reinforced with metal grids. Their parameters are specified using the results of physical structural modeling. The reinforced and non-reinforced rock supports with different fractional compositions ...
Read More
In this work, we focus on the technology of stabilizing roof rocks by constructing separate rock supports reinforced with metal grids. Their parameters are specified using the results of physical structural modeling. The reinforced and non-reinforced rock supports with different fractional compositions are arranged and tested. Their initial shapes are similar to rectangular parallelepipeds with the base width-to-length ratios of 1:1, 1:1.5, and 1:2. Their shrinkage is determined by loading the supports regarding the rock particle size and the reinforcement density. Increasing the reinforcement density leads to reducing the linear dimensions without losing load-bearing capacity. It is proved that using the grids conduces the self-wedging of the rock particles. They are most effective at the initial stage of the formation of the load-bearing core. The exponential power dependence of the relative support shrinkage on the grid partitions number is obtained. The bearing core sizes in different supports are determined. For the non-reinforced supports, the core width is about 60% of the initial support width, and for the reinforced ones, it is about 90%. The exponential dependence of the core width-to-height ratio on the number of grid partitions is established. The expression for determining the reinforced support width is obtained. The support stability depends on the smallest initial base size. The size of the rock material has a little effect on the shrinkage. Reinforcement by three metal grids leads to reducing the pliability by 21% and 24% for the supports with the side ratios of 1:1 and 2:1, respectively.
Hafeezur Rehman; Ahmad Shah; Mohd Hazizan bin Mohd Hashim; Naseer Muhammad Khan; Wahid Ali; Kausar Sultan Shah; Muhammad Junaid; Rafi Ullah; Muhammad Bilal Adeel
Abstract
The major factors affecting tunnel stability include the ground conditions, in-situ stresses, and project-related features. In this research work, critical strain, stress reduction factor (SRF), and capacity diagrams are used for tunnel stability analysis. For this purpose, eighteen tunnel sections are ...
Read More
The major factors affecting tunnel stability include the ground conditions, in-situ stresses, and project-related features. In this research work, critical strain, stress reduction factor (SRF), and capacity diagrams are used for tunnel stability analysis. For this purpose, eighteen tunnel sections are modelled using the FLAC2D software. The rock mass properties for the modelling are obtained using the RocLab software. The results obtained show that tunnel deformations in most cases are within the safety limit. Meanwhile, it is observed that the rock mass quality, tunnel size, and in-situ stresses contribute to the deformation. The resulting deformations also affect SRF. SRF depends on the in-situ stresses, rock mass quality, and excavation sequence. The capacity diagrams show that the liner experience stress-induced failures due to stress concentration at the tunnel corners. This study concludes that tunnel stability analysis must include an integrated approach that considers the rock quality, in-situ stress, excavation dimensions, and deformations.
Exploitation
M. Mohseni; M. Ataei; R. Khaloo Kakaie
Abstract
The contamination of ores with wastes or materials of lower than the cut-off grade is referred to as dilution. Dilution is an undesirable phenomenon that, on one hand, reduces the product grade and, consequently, reduces the sales prices and, on the other hand, adds an extra cost to waste production. ...
Read More
The contamination of ores with wastes or materials of lower than the cut-off grade is referred to as dilution. Dilution is an undesirable phenomenon that, on one hand, reduces the product grade and, consequently, reduces the sales prices and, on the other hand, adds an extra cost to waste production. Therefore, studying and evaluating the dilution risk is important in mining, and especially in underground mining. In this work, using a powerful decision-making method, i.e. Multi-Attributive Approximation Area Comparison (MABAC), the dilution risk and ranking it in underground mines are assessed. For this purpose, the most important parameters affecting the dilution in 10 mines of the Venarch manganese mines are first identified and then weighed using the Fuzzy Delphi Analytical Hierarchy Analysis (FDAHP) method. Then using the MABAC method, the dilution risk score for each mine is estimated, and subsequently, various mines are ranked as the dilution risk. Then with the implementation of the Cavity Monitoring System (CMS) and measurement of the actual dilution values, the mines are ranked in dilution. The correct matching of the results of these two rankings indicates that the MABAC method is highly effective in the ranking of the risk. At the end, the risk ranking of the mines is done using the TOPSIS method, and the lack of full compliance with the results of this method with the actual values indicates that the MABAC method is preferable to the TOPSIS method.
Rock Mechanics
Kapoor Chand; Radhakanta Koner
Abstract
In open-pit mine, safety of internal dumps is a significant pointer on the economic perspective of the overall project. It has been found in several studies that unplanned and random deposition of the overburdened material is the main reason for mishaps and failure. The study utilized unmanned aerial ...
Read More
In open-pit mine, safety of internal dumps is a significant pointer on the economic perspective of the overall project. It has been found in several studies that unplanned and random deposition of the overburdened material is the main reason for mishaps and failure. The study utilized unmanned aerial vehicles (UAVs) to map the mine dumps, and the precise 3D geometry of the same was reconstructed to evaluate the safety using numerical methods. A framework is proposed to assess and identify the potential zone of instability in the mine dumps. The study was conducted at the open-pit mine at the Raniganj coalfield of Paschim Bardhaman in West Bengal, India. The study assessed the internal dump safety using a 3D limit equilibrium method and numerical methods. Finally, optimum parameters are suggested for the mine dumps geometry under the prevailing geo-mining conditions of the mine site. The framework proposed here for assessing critical zones in mine dumps is cost-effective, easy to use, quick, and efficient.
Exploitation
Marco Antonio Cotrina Teatino; Jairo Jhonatan Marquina Araujo; Jose Nestor Mamani Quispe; Solio Marino Arango-Retamozo; Johnny Henrry Ccatamayo-Barrios; Joe Alexis Gonzalez-Vasquez; Teofilo Donaires-Flores; Maxgabriel Alexis Calla-Huayapa
Abstract
Mining plays a crucial role in the economy of many countries, contributing significantly to GDP, employment, and industrial development. However, optimizing drilling and blasting operations remains a key challenge in open-pit mining due to its direct impact on operational costs and rock fragmentation ...
Read More
Mining plays a crucial role in the economy of many countries, contributing significantly to GDP, employment, and industrial development. However, optimizing drilling and blasting operations remains a key challenge in open-pit mining due to its direct impact on operational costs and rock fragmentation efficiency. This work aims to optimize fragmentation (X50) and drilling and blasting costs using hybrid machine learning models, an innovative approach that improves predictive accuracy and economic feasibility. Six models were developed: Artificial Neural Networks (ANNs), Decision Trees (DT), Extreme Gradient Boosting (XGBoost), Random Forest (RF), and Support Vector Regression (SVR), optimized using Genetic Algorithm (GA) and Particle Swarm Optimization (PSO). The dataset, comprising 100 blasts, was split into 70% for training and 30% for testing. The SVR+PSO model achieved the highest accuracy for fragmentation prediction, with an RMSE of 0.27, MAE of 0.21, and R2 of 0.92. The RF+GA model was most effective for cost prediction, with an RMSE of 414.58, MAE of 354.14, and R2 of 0.99. Optimization scenarios were implemented by reducing burden (4.3 m to 3.8 m) and spacing (5.0 m to 4.5 m), achieving a 5.7% reduction in X50 (17.6 cm to 16.6 cm) and a 9.5% cost decrease (63,000 USD to 57,000 USD per blast). Predictions for 30 future blasts using the RF + GA model estimated a total cost of 1.7 MUSD, averaging 55,180 USD per blast. These findings confirm the effectiveness of machine learning in cost optimization and improving blasting efficiency, presenting a robust data-driven approach to optimizing mining operations.
Rock Mechanics
Naeem Abbas; Li Kegang
Abstract
The study examined the influence of cohesion, friction angle, and tunnel diameter on stability within engineering and geotechnical frameworks, while considering the consequences of nearby excavations on the overall stability assessment. The results show that a higher angle of internal friction leads ...
Read More
The study examined the influence of cohesion, friction angle, and tunnel diameter on stability within engineering and geotechnical frameworks, while considering the consequences of nearby excavations on the overall stability assessment. The results show that a higher angle of internal friction leads to a decrease in soil stability number and weighting coefficient. Tunnel diameter significantly affects face support pressure, with larger diameters requiring stronger support due to increased stress. Higher friction angles help stabilize tunnel faces and mitigate diameter-related pressure effects. Stress redistribution around the tunnel is significant within 2 meters from the center, transitioning to elastic behavior elsewhere. A safety factor of 1.3 ensures tensile failure prevention in single and twin tunnels. Balanced stress distribution between tunnels with a slight difference is observed under isotropic in-situ stress. Numerical modeling enhances stress estimations and reveals changes during tunnel excavation, weakening the rock mass. Ground reaction curve analysis with support measures shows reduced tunnel convergence after implementation, suggesting support strategies like extended bolts using updated rock mass rating. The study improves tunnel design and stability assessment by comprehensively understanding stress redistribution and support strategies.
A. Ramezanzadeh; M. Hood
Abstract
The first step in mining activities is rock excavation in both mine development and production. Constant pressure for cost reduction and creating an improved/safe work environment for personnel has naturally resulted in increased use of mechanical excavation systems in many mining operations. Also, mechanical ...
Read More
The first step in mining activities is rock excavation in both mine development and production. Constant pressure for cost reduction and creating an improved/safe work environment for personnel has naturally resulted in increased use of mechanical excavation systems in many mining operations. Also, mechanical excavation and mining is more compatible with automation, meaning possibility of reduction in number of people in the active underground mines. This factor plays a major role in selection of mining systems especially considering the dire shortage of skilled labour in the industry. While these systems are an integral part of mining activities in underground soft rock mining (coal, salt, potash, trona etc.), there is a need for developing new approaches and machinery for use in the underground hard rock mining. This paper will offer a review of current and emerging technologies for mechanical hard rock excavation, including disc cutting technology, drag picks, mini-disc, and activated/oscillating disc cutter. A review of general guidelines for assessment of the potentials of new research and development on this topic and evaluation of emerging technologies for a specific mining application will also be offered.
R. Ghavami-Riabi; H.F.J. Theart
Abstract
The massive sulphide deposit at Kantienpan Cu-Zn mine is hosted by volcano sedimentary succession known as the
Areachap Group, in the eastern part of Namaqua Metamorphic Province, South Africa. The deposits were affected by a
complex deformation and metamorphic history and represent ...
Read More
The massive sulphide deposit at Kantienpan Cu-Zn mine is hosted by volcano sedimentary succession known as the
Areachap Group, in the eastern part of Namaqua Metamorphic Province, South Africa. The deposits were affected by a
complex deformation and metamorphic history and represent examples of upper amphibolite to granulite grade
metamorphosed volcanic-hosted massive sulphide (VHMS) deposits. The principal purpose of this research is to
characterise the primary geochemical halo’s related to VHMS deposits in this mine. Lithogeochemical characterization
of the primary haloes is based on borehole samples of the footwall, ore zone and hanging wall successions.
Geochemically, the ore zone and alteration zones at Kantienpan VHMS ore deposit display a high peraluminous ratio
confirming the peraluminous nature of these zones as indicated mineralogically and lithologically. The intervals
identified in sampled borehole core with low CaO and Na2O and with high MgO and K2O contents represent the
alteration zone in the original footwall rocks of the deposit.
R. Gholami; A. Moradzadeh
Abstract
Reservoir permeability is a critical parameter for characterization of the hydrocarbon reservoirs. In fact, determination of permeability is a crucial task in reserve estimation, production and development. Traditional methods for permeability prediction are well log and core data analysis which are ...
Read More
Reservoir permeability is a critical parameter for characterization of the hydrocarbon reservoirs. In fact, determination of permeability is a crucial task in reserve estimation, production and development. Traditional methods for permeability prediction are well log and core data analysis which are very expensive and time-consuming. Well log data is an alternative approach for prediction of permeability because they are usually available for all of the wells. Hence, attempts have been made to utilize well log data to predict permeability. However, because of complicate and non-linear relationship of well log and core permeability data, usual statistical and artificial methods are not completely able to provide meaningful results. In this regard, recent works on artificial intelligence have led to the introduction of a robust method generally called support vector machine (SVM). The term “SVM” is divided into two subcategories: support vector classifier (SVC) and support vector regression (SVR). The aim of this paper is to use SVR for predicting the permeability of three gas wells in South Pars filed, Iran. The results show that the overall correlation coefficient (R) between predicted and measured permeability of SVR is 0.97 compared to 0.71 of a developed general regression neural network. In addition, the strength and efficiency of SVR was proved by less time-consuming and better root mean square error in training and testing dataset.
Environment
Aditi Nag; Anurag Singh Rathore
Abstract
This research is focused on analyzing the possibilities and challenges of developing tourism in mining heritage cities (MHCs) within conflict areas. These cities simultaneously have vibrant historical and cultural resources and tourism possibilities in the context of security threats and infrastructural ...
Read More
This research is focused on analyzing the possibilities and challenges of developing tourism in mining heritage cities (MHCs) within conflict areas. These cities simultaneously have vibrant historical and cultural resources and tourism possibilities in the context of security threats and infrastructural inadequacy, which usually characterize conflict areas. The study aims to find ways of boosting tourism competitiveness for such areas with a specific interest in formulating sustainable tourist management policies that foster community involvement and cultural heritage protection. The case study analyzes different conflict areas, representing the best practices and the most effective way of exploiting heritage in mining and luring tourist attractions based on the authentic experience. The results exhibit how tourism can serve as an agent towards economic recovery and social empowerment and acts towards peacebuilding in conflict-affected areas. This study furnishes pragmatic recommendations for legislators, the tourism sector, and community members to favor a more robust and inclusive tourism model that benefits the local community and cultural heritage conservation. Finally, the paper underlines the need to understand the complexity of tourism in conflict areas, using some invisible resources for renewal and growth.
Mostafa Javid; Behzad Tokhmechi
Abstract
There are two methods for identifying formation interface in oil wells: core analysis, which is a precise approach but costly and time consuming, and well logs analysis, which petrophysists perform, which is subjective and not completely reliable. In this paper, a novel coupled method was proposed to ...
Read More
There are two methods for identifying formation interface in oil wells: core analysis, which is a precise approach but costly and time consuming, and well logs analysis, which petrophysists perform, which is subjective and not completely reliable. In this paper, a novel coupled method was proposed to detect the formation interfaces using GR logs. Second approximation level (a2) of GR log gained from optimum mother wavelet decomposition was used for formation interface detection. Short time Fourier transform (STFT) of a2 was gained since the window band was fixed in the entire of well depths. Inverse STFT of various windows of transformed data was gained, which creates various signals in depth domain. To this end, a novel formulation was developed to obtain modified signal for formation interface detection. The mean of various resulted signals creates a smooth signal the logarithm well of which highlights formation interfaces. Synthetic data were used to test the applicability of proposed algorithm. Accordingly, GR logs corresponding to five different wells located in an oilfield in south of Iran also were used to investigate the accuracy and applicability of the proposed method. Lastly, the validation process took place by comparing the results of core data analysis and the proposed method. Good agreements were obtained between these approaches, demonstrating the applicability of the proposed methodology.
M. Hemmatian; B. Tokhmchi; V. Rasouli; R. Gholami
Abstract
A good knowledge of the parameters causing casing damage is critically important due to vital role of casing during the life of a well. Cement sheath, which fills in the gap between the casing and wellbore wall, has a profound effect on the resistance of the casing against applied loads. Most of the ...
Read More
A good knowledge of the parameters causing casing damage is critically important due to vital role of casing during the life of a well. Cement sheath, which fills in the gap between the casing and wellbore wall, has a profound effect on the resistance of the casing against applied loads. Most of the empirical equations proposed to estimate the collapse resistance of casing ignore the effects of the cement sheath on collapse resistance and rather assume uniform loading on the casing. This paper aims to use numerical modeling to show how a bad cementing job may lead to casing damage. Two separate cases were simulated where the differences between good and bad cementation on casing resistance were studied. In both cases, the same values of stresses were applied at the outer boundary of the models. The results revealed that a good cementing job can provide a perfect sheath against the tangential stress induced by far-field stresses and reduce the chance of casing to be damaged.
Asghar Azizi; Ali Dehghani; Seyyed Zioddin Shafaei
Abstract
AbstractThe purpose of this study was to investigate the controllable operating parameters influence, including pH, solid content, collector, co-collector, and depressant dose, and conditioning time, on apatite flotation kinetics. Four first order flotation kinetic models are tested on batch flotation ...
Read More
AbstractThe purpose of this study was to investigate the controllable operating parameters influence, including pH, solid content, collector, co-collector, and depressant dose, and conditioning time, on apatite flotation kinetics. Four first order flotation kinetic models are tested on batch flotation time-recovery profiles. The results of batch flotation tests and the fitting of first-order kinetic models to assess the influence of operating parameters on the flotation kinetics indicated that model with fast and slow - floating components and classical model gave the best and the worst fit for experimental data, respectively. Also, rectangular distribution of floatabilities and gamma distribution of floatabilities fitted the experimental data well. In this study, the model with rectangular distribution of floatabilities associated with fractional factorial experimental design was employed to evaluate the effect of six main parameters on kinetic parameters (R_∞, K). The result indicated that linear effects of depressant dose, conditioning time, and the interaction effects of solid concentration and pH statistically were important on ultimate recovery but the significant parameters for flotation rate constant were linear effects of solids content, depressant dosage and the interaction effect between pH and conditioning time. Regression equations obtained to relate between flotation operation and kinetic parameters.
Hamid Khoshdast
Abstract
A new parametric model was developed for predicting cut point of hydraulic classifiers. The model directly uses operating parameters including pulp flowrate, feed particle size characteristics, pulp solids content, solid density and particles retention time in the classification chamber and also covers ...
Read More
A new parametric model was developed for predicting cut point of hydraulic classifiers. The model directly uses operating parameters including pulp flowrate, feed particle size characteristics, pulp solids content, solid density and particles retention time in the classification chamber and also covers uncontrollable errors using calibration constants. The model applicability was first verified using a bench scale classifier and then, validated at industrial scale for a coal classifier. Results showed that the new model can predict the cut point more precisely compared to the conventional Masliyah model, i.e. the accuracy values of 80% and 37% for the new and Masliyah models, respectively. Sensitivity study showed that the model was extremely sensitive to the particle size distribution of feed while being least sensitive to the particles retention time.
