Rock Mechanics
Ehsan Taheri; Reza Mohammadpour; Mohammad Hossein Mokhtarzadeh
Abstract
In recent years, the demand for new trenchless methods has dramatically risen. Pipe jacking is a trenchless method widely used in recent years. Ground deformation is one of the significant parameters that may lead to unrepairable harm to facilities and even people. So, ground deformation analysis is ...
Read More
In recent years, the demand for new trenchless methods has dramatically risen. Pipe jacking is a trenchless method widely used in recent years. Ground deformation is one of the significant parameters that may lead to unrepairable harm to facilities and even people. So, ground deformation analysis is necessary for safety and design reasons. The present study analyzes the factors affecting ground deformation during pipe jacking. This is a descriptive-interventional study. Pipe jacking causes soil displacement in three dimensions (3-D). Therefore, 3-D numerical methods were applied for analysis. In this study, numerical simulation was performed using PLAXIS finite element numerical software, taking the case study into account. The effect of each parameter on the ground deformation pattern was studied in three directions; the uplift and their exact position were then analyzed. It should be noted that displacement analyses were performed in two areas: pipe crown and ground surface. Also, the relation of each parameter was estimated with the ground subsidence. Finally, the effect of each different factor and their sensitivity index were determined using sensitivity analysis. The highest subsidence occurs at the end of the shield due to stress relaxation. Considering the results, it was found that the relationship between the internal friction angle and subsidence is linear and direct. The relationship between the elastic modulus and subsidence is also linear but indirect. The results indicate that the most sensitive factor of ground deformation is the diameter, but the least sensitive factor is the face pressure.
M. Kamran; Sh. Bacha; N. Mohammad
Abstract
This paper elucidates a new idea and concept for exploration of the gold ore deposits. The cyanidation method is traditionally used for gold extraction. However, this method is laborious, time-consuming, costly, and depends upon the availability of the processing units. In this work, an attempt ...
Read More
This paper elucidates a new idea and concept for exploration of the gold ore deposits. The cyanidation method is traditionally used for gold extraction. However, this method is laborious, time-consuming, costly, and depends upon the availability of the processing units. In this work, an attempt is made in order to update the gold exploration method by the Monte Carlo-based simulation. An excellent approach always requires a high quality of the datasets for a good model. A total of 48 incomplete datasets are collected from the Shoghore district, Chitral area of Khyber, Pakhtunkhwa, Pakistan. The cyanidation leaching test is carried out in order to measure the percentage of the gold ore deposits. In this work, the mean, median, mode, and successive iteration substitute methods are employed in such a way that they can compute the datasets with missing attributes. The multiple regression analysis is used to find a correlation between the potential of hydrogen ion concentration (pH), solid content (in %), NaCN concentration (in ppm), leaching time (in Hr), particle size (in µm), and measured percentage of gold recovery (in %). Moreover, the normal Archimedes and exponential distributions are employed in order to forecast the uncertainty in the measured gold ore deposits. The performance of the model reveals that the Monte Carlo approach is more authentic for the probability estimation of gold ore recovery. The sensitivity analysis reveals that pH is the most influential parameter in the estimation of the gold ore deposits. This stochastic approach can be considered as a foundation to foretell the probabilistic exploration of the new gold deposits.
K. Sultan Shah; M. H. Bin Mohd Hashim; K. Sh. Bin Ariffin
Abstract
The particles within the rock samples are present in extensive ranges of shapes and sizes, and their characterization and analysis exist with a considerable diversity. The prior research works have appraised the significance of the particle shape types and their effects on the geotechnical structures ...
Read More
The particles within the rock samples are present in extensive ranges of shapes and sizes, and their characterization and analysis exist with a considerable diversity. The prior research works have appraised the significance of the particle shape types and their effects on the geotechnical structures and deficiencies by evaluating the uncertainty-related rock particle shape descriptors (PSDs). In this work, the Monte Carlo simulation (MCS) is used in order to present a framework to integrate the inherent uncertainty associated with PSDs. A tabletop microscope is used to measure the primary particle shape distribution for the sandstone samples. An open-source processing tool, ImageJ, is used in order to analyze PSDs. The probabilistic distribution of PSDs is acquired using MCS according to the relative frequency histogram of the input parameters. Additionally, a probabilistic sensitivity analysis is performed in order to evaluate the importance of the input parameters in PSDs. The sensitivity analysis results demonstrate that the major axis and area are the most influential parameters involved. The simulation results obtained have revealed that the proposed framework is capable of integrating the inherent uncertainties related to the particle shape.
Rock Mechanics
A. Asgari; A. Ramezanzadeh; Seyed M. E. Jalali; B. Brouard
Abstract
Ensuring the stability and integrity of underground gas storage salt caverns is a very complicated subject due to the non-linear and time-dependent behavior of rock salts under complicated thermal and mechanical loading conditions. For this reason, pressure and temperature fluctuations in the caverns ...
Read More
Ensuring the stability and integrity of underground gas storage salt caverns is a very complicated subject due to the non-linear and time-dependent behavior of rock salts under complicated thermal and mechanical loading conditions. For this reason, pressure and temperature fluctuations in the caverns and their surrounding strata must be integrated into the analysis and the numerical tools that are used for this purpose. LOCAS, a 2D axisymmetric finite-element code, dedicated to the stability analysis of underground salt spaces, was applied to assess the effects of various operating and geometrical parameters on the cavern behavior. In this paper, we aimed to give an overall assessment of the behavior of the salt caverns used for natural gas storage. In this work, some specific loading scenarios were considered first, followed by thorough parametric and sensitivity analyses to reveal the impacts of the geometrical parameters and operational parameters involved on the behavior of salt caverns using the modern stability criteria. The findings showed that the onset of dilation was more likely to happen within the first cavern life cycle when pressure dropped to the minimum level. As for the potential of tension occurrence in the surrounding rock, this is more likely to happen by increasing the number of operation cycles, especially in the upper one-third of the cavern wall. Finally, it was seen that the cavern depth and minimum cavern internal pressure had even more important influences than the others on the salt cavern behavior.
Rock Mechanics
H. Fattahi; N. Babanouri; Z. Varmaziyari
Abstract
The dynamic response of slopes against earthquake is commonly characterized by the earthquake-induced displacement of slope (EIDS). The EIDS value is a function of several variables such as the material properties, slope geometry, and earthquake acceleration. This work is aimed at the prediction of EIDS ...
Read More
The dynamic response of slopes against earthquake is commonly characterized by the earthquake-induced displacement of slope (EIDS). The EIDS value is a function of several variables such as the material properties, slope geometry, and earthquake acceleration. This work is aimed at the prediction of EIDS using the Monte Carlo simulation method (MCSM). Hence, the parameters height, unit specific weight, cohesion, friction angle, vibration duration, and maximum horizontal acceleration are used to predict the EIDS values. To do this, a multiple non-linear regression relationship is first derived between EIDS and the independent variables. Then MCSM is performed based on the developed regression equation. The results obtained demonstrate that the stochastic approach used is able to successfully reproduce the EIDS values and calculate the confidence intervals. The average of the measured and simulated values for EIDS was 4.34 cm and 4.48 cm, respectively. Eventually, the results of a performed correlation sensitivity analysis revealed that the maximum horizontal acceleration had the greatest impact on EIDS.
Exploitation
R. Ghasemi; B. Tokhmechi; G. Borg
Abstract
The known ore deposits and mineralization trends are important key exploration criteria in mineral exploration within a specific region. Fry analysis has conventionally been considered as a suitable method to determine the mineralization trends related to linear structures. Based upon literature sources, ...
Read More
The known ore deposits and mineralization trends are important key exploration criteria in mineral exploration within a specific region. Fry analysis has conventionally been considered as a suitable method to determine the mineralization trends related to linear structures. Based upon literature sources, to date, no investigation has been carried out that includes the Sensitivity Analysis of Feature's Number (SAFN), Sensitivity Analysis of Window Size (SAWS), and Sensitivity Analysis of Spatial Distribution (SASD) of Fry analysis related to mineral locations. In this work, SAFN, SAWS, and SASD are performed by moving several different sub-windows among the main window in order to identify the main trends of mineralization by Fry analysis in the Bavanat region of Iran, which is qualified by its regional and local faults pattern. Based upon our investigation, the effectiveness of the window size and the number of features on Fry analysis are 15-30%. The determined main trends of sub-windows increase, whereas its distribution function of Fry outputs is more similar to the distribution function of Fry outputs of the main window. Moreover, the directions of rose diagrams could be changed due to the edge effects of marginal features around the selected window. However, by selecting an appropriate window, this problem can be solved. Additionally, by an appropriate window selection, the most suitable regional situation is an area that contains the largest number of deposits with a similar metallogenetic origin. Based upon our investigation, the distribution function of the Fry outputs is the main factor that directly controls the identified mineralization pattern of the selected windows.
