H. Fattahi; M. Hasanipanah; N. Zandy Ilghani
Abstract
The mechanical characteristics of rocks and rock masses are considered as the determining factors in making plans in the mining and civil engineering projects. Two factors that determine how rocks responds in varying stress conditions are P-wave velocity (PWV) and its isotropic properties. Therefore, ...
Read More
The mechanical characteristics of rocks and rock masses are considered as the determining factors in making plans in the mining and civil engineering projects. Two factors that determine how rocks responds in varying stress conditions are P-wave velocity (PWV) and its isotropic properties. Therefore, achieving a high-accurate method to estimate PWV is a very important task. This work investigates the use of different intelligent models such as multivariate adaptive regression splines (MARS), classification and regression tree (CART), group method of data handling (GMDH), and gene expression programming (GEP) for the prediction of PWV. The proposed models are then evaluated using several error statistics, i.e. squared correlation coefficient (R2) and root mean squared error (RMSE). The values of R2 obtained from the CART, MARS, GMDH, and GEP models are 0.983, 0.999, 0.995, and 0.998, respectively. Furthermore, the CART, MARS, GMDH, and GEP models predict PWV with the RMSE values of 0.037, 0.007, 0.023, and 0.020, respectively. According to the aforementioned amounts, the models presented in this work predict PWV with a good performance. Nevertheless, the results obtained reveal that the MARS model yields a better prediction in comparison to the GEP, GMDH, and CART models. Accordingly, MARS can be offered as an accurate model for predicting the aims in other rock mechanics and geotechnical fields.
H. Fattahi
Abstract
The tensile strength (σt) of a rock plays an important role in the reliable construction of several civil structures such as dam foundations and types of tunnels and excavations. Determination of σt in the laboratory can be expensive, difficult, and time-consuming for certain projects. Due ...
Read More
The tensile strength (σt) of a rock plays an important role in the reliable construction of several civil structures such as dam foundations and types of tunnels and excavations. Determination of σt in the laboratory can be expensive, difficult, and time-consuming for certain projects. Due to the difficulties associated with the experimental procedure, it is usually preferred that the σt is evaluated in an indirect way. For these reasons, in this work, the adaptive network-based fuzzy inference system (ANFIS) is used to build a prediction model for the indirect prediction of σt of sandstone rock samples from their physical properties. Two ANFIS models are implemented, i.e. ANFIS-subtractive clustering method (SCM) and ANFIS-fuzzy c-means clustering method (FCM). The ANFIS models are applied to the data available in the open source literature. In these models, the porosity, specific gravity, dry unit weight, and saturated unit weight are utilized as the input parameters, while the measured σt is the output parameter. The performance of the proposed predictive models is examined according to two performance indices, i.e. mean square error (MSE) and coefficient of determination (R2). The results obtained from this work indicate that ANFIS-SCM is a reliable method to predict σt with a high degree of accuracy.
Mineral Processing
Aghil Haghdadi; Sima Mohammadnejad
Abstract
The presence of copper bearing minerals in cyanidation of gold ores may lead to several challenges in the CIP/CIL circuits. Many solutions have been proposed to address these problems, one being the use of glycine in the cyanidation process. Here, the experimental as well as molecular modelling studies ...
Read More
The presence of copper bearing minerals in cyanidation of gold ores may lead to several challenges in the CIP/CIL circuits. Many solutions have been proposed to address these problems, one being the use of glycine in the cyanidation process. Here, the experimental as well as molecular modelling studies using Density Functional Theory (DFT) have been conducted to investigate the glycine role in cyanidation of copper bearing gold ores. The results show that in the presence of glycine in the solution containing copper-cyanide species and in very low or zero free cyanide content, the dissolution rate of gold is significantly improved (3.02 vs. 0.23 ppm), while no improvement is observed in copper free or cyanide enriched solutions. Molecular modeling has been performed to interpret the laboratory results as well as to identify the mechanisms. The modeling results demonstrate that in cyanide deficient solutions, cyanide complex of copper complexes (E = -319 kCal.mol-1) is replaced by glycine, and the free cyanide produced results in higher gold cyanidation as well as lower copper cyanide formation.
Mineral Processing
M. Salehfard; M. Noaparast; Seyed Z. Shafaei; H. Abdollahi
Abstract
A lead-zinc carbonate ore sample containing 2.5% Pb and 9.39% Zn was used in this research work. The sample was prepared from the Darreh-Zanjir mine located in the Yazd province (Iran). Influences of the influential factors on flotation of smithsonite and cerussite were investigated. Among the different ...
Read More
A lead-zinc carbonate ore sample containing 2.5% Pb and 9.39% Zn was used in this research work. The sample was prepared from the Darreh-Zanjir mine located in the Yazd province (Iran). Influences of the influential factors on flotation of smithsonite and cerussite were investigated. Among the different parameters involved, dosages of the dispersant, depressants, sulfidizing agent, and collectors de-sliming prior to lead or zinc flotation were essential for the effective recovery and grade of the Zn and Pb flotation concentrates. In addition, the anionic, cationic, and mixed (cationic/anionic) collectors were employed for flotation of smithsonite. The results of reverse and cumulative flotation of both Zn and Pb were relatively low in comparison with the direct process without depressant. Flotation of smithsonite using mixed collectors (Armac C+KAX) showed promising results. Also dosages of chemicals in the cleaning stage for the Zn and Pb concentrates were optimized, and finally, after the cleaner stage for both lead and zinc, a cerussite concentrate with Pb grade and recovery of 49.82% and 60.06%, respectively, and smithsonite concentrate with Zn grade and recovery of 35.47% and 68.56%, respectively, were obtained under the optimal conditions. Furthermore, kinetics of Zn and Pb oxide mineral flotations in the rougher and cleaner stages were studied, which showed that some kinetics models, especially the classical first-order model, could predict the flotation behaviour of the Zn and Pb oxide minerals.
Exploitation
A. Mozafari; A. H. Bangian Tabrizi; M. Taji; A. Parhizkar
Abstract
In this paper, we present an integrated model to find the optimum size of blast block that uses (i) a multi-criteria decision-making method to specify the applicable size of the mineable block; (ii) a linear programming method for the selection of the blasted areas to be excavated and in deciding the ...
Read More
In this paper, we present an integrated model to find the optimum size of blast block that uses (i) a multi-criteria decision-making method to specify the applicable size of the mineable block; (ii) a linear programming method for the selection of the blasted areas to be excavated and in deciding the quantity of ores and wastes to be mined from each one of the selected blocks. These two methods use improved estimates of the orebody characteristics utilizing the blast hole data in addition to the usual borehole statistics to improve the prediction accuracy of the block level ore body characteristics. This work aims to make a mathematical model to figure out the ideal width and length of the blast block in order to curtail drilling and blasting expenses in open-pit mines. As a consequence, the effective blast block size is heeded so as to decrease the expenses of drilling and blasting. Furthermore, a complete set of actual principles is presented to specify the applicable size of the mineable block by means of the multi-criteria decision-making method of fuzzy logic. The aforementioned model is practiced to forecast the block size necessary for the purpose of production planning. Next, a mixed integer programming model is developed to blast planning in order to select the optimal size of the blast block by considering the mineable block. The proposed model is applied in the Chadormalu iron ore mine and the rationality of the model is demonstrated by the outcomes of dissimilar circumstances.
M. M. Nazempour; A. Majdi
Abstract
Prediction of the length of grout penetration and assessment of the groutability around the boreholes in the jointed rocks have a crucial effect on the planning and execution of grouting. Grout distribution in jointed rocks is a function of the geo-mechanical properties of rock mass, grout properties, ...
Read More
Prediction of the length of grout penetration and assessment of the groutability around the boreholes in the jointed rocks have a crucial effect on the planning and execution of grouting. Grout distribution in jointed rocks is a function of the geo-mechanical properties of rock mass, grout properties, and grout operational performance. This paper describes an analytical model based on the Newton’s second law, with the assumption of disk-shape model for the joints in order to calculate the maximum length of grout penetration in the horizontal and angled joints. It is shown that the proposed formulas can predict the length of grout penetration in rock masses with numerous joint sets as well. In order to validate the proposed model, it is compared with the existing analytical and empirical criteria, showing a very good accordance with their calculated results. Finally, the proposed analytical model is used to design the grout planning of a water conveying tunnel that is subjected to a heavy inflow. The design results in a successful filling of the vacant space behind the segmental lining and sealing the tunnel to stop the inrush water. These show that the model proposed in this paper can be successfully applied in practice.
E. Pouresmaeili; A. Ebrahimabadi; H. Hamidian
Abstract
Sustainability assessment has received numerous attentions in the mining industry. Mining sustainability includes the environmental, economic, and social dimensions, and a sustainable development is achieved when all these dimensions improve in a balanced manner. Therefore, to measure the sustainability ...
Read More
Sustainability assessment has received numerous attentions in the mining industry. Mining sustainability includes the environmental, economic, and social dimensions, and a sustainable development is achieved when all these dimensions improve in a balanced manner. Therefore, to measure the sustainability score of a mine, we require an approach that evaluates all these three dimensions of mining sustainability. Some frameworks have been developed to compute the sustainability score of mining activities; however, some of them are very complicated and the others do not cover all the environmental, economic, and social aspects of sustainability. In order to fill this gap, this work was designed to introduce a practical approach to determine the score of mining sustainability. In order to develop this approach, initially, 14 negative and positive influential macro factors in the sustainability of open-pit mines were identified. Then the important levels of the factors were estimated based on the comments and scores of some experts. Two checklists were constructed for the negative and positive factors. The sustainability score was computed using these checklists and the importance levels of the factors. The score range was between -100 and +100. In order to implement the proposed approach, the Angouran lead and zinc mine was selected. The sustainability score of the Angouran mine was +47.91, which indicated that the this mine had a sustainable condition. This score could increase through modification of some factors.
Sirvan Moradi; Seyed Davoud Mohammadi; Abbas Aghajani Bazzazi; Ali Aali Anvari; Ava Osmanpour
Abstract
Feasibility studies of mining and industrial investment projects are usually associated with uncertain parameters; hence, these investigations rely on prediction. In these particular conditions, simulation and modelling techniques remain the most significant approaches to reduce the decision risk. Since ...
Read More
Feasibility studies of mining and industrial investment projects are usually associated with uncertain parameters; hence, these investigations rely on prediction. In these particular conditions, simulation and modelling techniques remain the most significant approaches to reduce the decision risk. Since several uncertain parameters are incorporated in the modelling process, distribution functions are employed to explain the parameters. However, due to the usual constrain of limited data, these functions cannot significantly explain the variation of those uncertain parameters. Support vector machine, one of the efficient techniques of artificial intelligence, provides the appropriate results in the classification and regression tasks. The principal aims of this research work are to integrate the simulation and artificial intelligence methods to manage the risk prediction of an economic system under uncertain conditions. The financial process of the Halichal mine in the Mazandaran province, Iran, is considered a case study to prove the performance of the support vector machine technique. The results show that integrating the simulation and support vector machine techniques can provide more realistic results, especially when including uncertain parameters. The correlation between the net present value obtained from the simulation and the net present value is about 0.96, which shows the capability of artificial intelligence methods and the simulation process. The root mean square error of the support vector machine prediction is about 0.322, which indicates a low error rate in the net present value estimation. The values of these errors prove that this method has a high accuracy and performance for predicting a net present value in the Halichal granite mine.
Rock Mechanics
Erfan Amini; Masoud Mojarab; Hossein Memarian
Abstract
Landslides are defined as the downward movement of a portion of land materials under the direct influence of gravity. Landslides would get triggered by a wide spectrum of initiative factors such as earthquakes as a site effect of that event. In the vicinity of Tehran, significant historical earthquakes ...
Read More
Landslides are defined as the downward movement of a portion of land materials under the direct influence of gravity. Landslides would get triggered by a wide spectrum of initiative factors such as earthquakes as a site effect of that event. In the vicinity of Tehran, significant historical earthquakes have occurred; therefore, tracing them could enhance the Tehran’s historical earthquake catalogue, due to the reason Tehran is a metropolitan and capital of Iran. However, paleoseismology could not determine the magnitude and seismic characteristics of historical earthquakes. Mobarak Abad landslide is a large and historical landslide located on Haraz road, a vital artery connecting Tehran to the Mazandaran Province, and there are significant faults like Mosha, North Alborz, and Khazar in its neighborhood. Hence, it is probable that this landslide occurred due to the generation of dynamic force resulting from an earthquake. Therefore, in this study, the geometrical characteristics of the landslide were measured by field surveying. Then with the empirical equations proposed by various researchers, we estimated the landslide volume and the magnitude of the corresponding earthquake, respectively. In the following, the epicenter and hypocenter of all the historical earthquakes within 200 kilometers of the landslide were identified. Then we utilized some conditions such as Keefer's graphs, error value in epicenter location, and peak ground acceleration to omit earthquakes and identify the corresponding earthquake event. The results demonstrate that two earthquakes of 1830 AD and 855 AD with a maximum acceleration of 0.16g are more probable than the 743 AD earthquake.
Mineral Processing
Reza Khodadadi Bordboland; Asghar Azizi; Mohammad Reza Khani
Abstract
The global growth of aluminum demand with the modernization of our society has led to the interest in developing alternative methods to produce aluminum from non-bauxite and low-grade resources such as shale bauxites. For such reserves, the conventional Bayer process is challenging and is not efficient ...
Read More
The global growth of aluminum demand with the modernization of our society has led to the interest in developing alternative methods to produce aluminum from non-bauxite and low-grade resources such as shale bauxites. For such reserves, the conventional Bayer process is challenging and is not efficient to extract aluminum, and the sintering process is known to be effective. Thus, this study aimed to scrutinize the technical feasibility of alumina extraction from an Iranian low-grade (shale) bauxite ore containing 36.22% Al2O3, 22.11% SiO2, 20.42% Fe2O3, 3.33% TiO2, and 3.13% CaO. In this regard, the sintering process with lime-soda followed by alkaline leaching was adopted to extract alumina, and response surface modeling was employed to assess the important parameters such as the sintering temperature, Na2O(caustic) concentration, CaO/SiO2 molar ratio, and Na2O/Al2O3 molar ratio. The findings indicated that the extraction rate improved by increasing the sintering temperature and CaO/SiO2 ratio and decreasing the Na2O(caustic) dose and Na2O/Al2O3 ratio. It was also found that the Na2O(caustic) concentration, sintering temperature, and interactive effect of Na2O(caustic) concentration with Na2O/Al2O3 ratio had the greatest influence on the extraction efficiency. The process optimization was conducted applying the desirability function approach, and more than 71% of Al2O3 was extracted at 1150 °C sintering temperature, 2.1 CaO/SiO2 molar ratio, 0.9 Na2O/Al2O3 molar ratio and 30 g/L Na2O(caustic) dose. Ultimately, it was concluded that a lime-soda sintering process at 1150 °C followed by one-step alkaline leaching with Na2O(caustic) at 90 °C could be metallurgically efficient for treating the low-grade (shale) bauxites.
Maysam Abedi; Gholam-Hossain Norouzi; Nader Fathianpour; Ali Gholami
Abstract
This paper describes the application of approximate methods to invert airborne magnetic data as well as helicopter-borne frequency domain electromagnetic data in order to retrieve a joint model of magnetic susceptibility and electrical resistivity. The study area located in Semnan province of Iran consists ...
Read More
This paper describes the application of approximate methods to invert airborne magnetic data as well as helicopter-borne frequency domain electromagnetic data in order to retrieve a joint model of magnetic susceptibility and electrical resistivity. The study area located in Semnan province of Iran consists of an arc-shaped porphyry andesite covered by sedimentary units which may have potential of mineral occurrences, especially porphyry copper. Based on previous studies, which assume a homogenous half-space earth model, two approximate methods involving the Siemon and the Mundry approaches are used in this study to generate a resistivity-depth image of underground geologically plausible porphyry unit derived from airborne electromagnetic data. The 3D visualization of the 1D inverted resistivity models along all flight lines provides a resistive geological unit which corresponds to the desired porphyry andesite. To reduce uncertainty arising from single geophysical model, i.e., the resistivity model acquired from the frequency domain electromagnetic data, a fast implementable approach for 3D inversion of magnetic data called the Lanczos bidiagonalization method is also applied to the large scale airborne magnetic data in order to construct a 3D distribution model of magnetic susceptibility, by which the obtained model consequently confirms the extension of an arc-shaped porphyry andesite at depth. The susceptible-resistive porphyry andesite model provided by integrated geophysical data indicates a thicker structure than what is shown on the geological map while extends down at depth. As a result, considering simultaneous interpretation of airborne magnetic and frequency domain electromagnetic data certainly yield lower uncertainty in the modeling of andesite unit as a potential source of copper occurrences.
Exploitation
B. Sohrabian; R. Mikaeil; R. Hasanpour; Y. Ozcelik
Abstract
The quality properties of andesite (Unit Volume Weight, Uniaxial Compression Strength, Los500, etc.) are required to determine the exploitable blocks and their sequence of extraction. However, the number of samples that can be taken and analyzed is restricted, and thus the quality properties should be ...
Read More
The quality properties of andesite (Unit Volume Weight, Uniaxial Compression Strength, Los500, etc.) are required to determine the exploitable blocks and their sequence of extraction. However, the number of samples that can be taken and analyzed is restricted, and thus the quality properties should be estimated at unknown locations. Cokriging has been traditionally used in the estimation of spatially cross-correlated variables. However, it can face unsolvable matrices in its algorithm. An alternative to cokriging is to transform variables into spatially orthogonal factors, and then to apply kriging to them. Independent Component Analysis (ICA) is one of the methods that can be used to generate these factors. However, ICA is applicable to zero lag distance so that using methods with distance parameter in their algorithms would be advantageous. In this work, Minimum Spatial Cross-correlation (MSC) was applied to six mechanical properties of Cubuk andesite quarry located in Ankara, Turkey, in order to transform them into approximately orthogonal factors at several lag distances. The factors were estimated at 1544 (5 m × 5 m) regular grid points using the kriging method, and the results were back-transformed into the original data space. The efficiency of the MSC-kriging was compared with Independent Component kriging (IC-kriging) and cokriging through cross-validation test. All methods were unbiased but the MSC-kriging outperformed the IC-kriging and cokriging because of having the lowest mean errors and the highest correlation coefficients between the estimated and the observed values. The estimation results were used to determine the most profitable blocks and the optimum direction of extraction.
Exploitation
I. Masoumi; Gh.R. Kamali; O. Asghari
Abstract
Dilution can best be defined as the proportion of waste tonnage to the total weight of ore and waste in each block. Predicting the internal dilution based on geological boundaries of waste and ore in each block can help engineers to develop more reliable long-term planning designs in mining activities. ...
Read More
Dilution can best be defined as the proportion of waste tonnage to the total weight of ore and waste in each block. Predicting the internal dilution based on geological boundaries of waste and ore in each block can help engineers to develop more reliable long-term planning designs in mining activities. This paper presents a method to calculate the geological internal dilution in each block and to correct the ultimate grade of each geological block according to the internal dilution values that have already been calculated for each one of them. In this regard, the input data is first indexed based on the lithological logs of drill holes. The occurrence probabilities of ore and waste in each block are calculated via 100 realizations using the sequential indicator simulation. Dilution is computed as the ratio of waste rock tonnage to the total tonnage of ore and waste. Furthermore, joint simulation of the continuous variables is performed for each mining block using the minimum/maximum auto-correlation factors. In the next step, for each block, the final grade variables including iron and iron oxide are computed by considering the calculated internal dilution. These analyses are applied to the Gohar Zamin iron ore deposit, and the actual internal dilution calculated based on the lithological logs of blast holes is compared with the same values obtained based on the proposed method in each block. The results obtained were found to be satisfactory.
Y. Asgari Nezhad; A. Moradzadeh
Abstract
One of the most essential factors involved in unconventional gas reserves for drilling and production is a suitable quality facies determination. The direct core and geochemical analyses are the most common methods used for studying this quality. Due to the lack of this data and the high cost, the researchers ...
Read More
One of the most essential factors involved in unconventional gas reserves for drilling and production is a suitable quality facies determination. The direct core and geochemical analyses are the most common methods used for studying this quality. Due to the lack of this data and the high cost, the researchers have recently resorted to the indirect methods that use the common data of the reservoir (including petro-physical logs and seismic data). One of the major problems in using these methods is that the complexities of these reproducible repositories cannot be accurately modeled. In this work, the quality of facies in shale gas is zoned using the deep learning technique. The applied method is long short-term memory (LSTM) neural network. In this scheme, the features required for zoning are automatically extracted and used to model the reservoir complexities properly. The results of this work show that zoning is done with an appropriate accuracy (86%) using the LSTM neural network, while it is 78% for a conventional intelligent MLP network. This specifies the superior accuracy of the deep learning method.
J. Zadhesh; A. Majdi
Abstract
The mechanisms of deformation and failure of the structures in and on the jointed rock masses are often governed by the characteristics of the geometrical properties of joints. Since the joint geometry properties have a range of values, it is helpful to understand the distribution of these values in ...
Read More
The mechanisms of deformation and failure of the structures in and on the jointed rock masses are often governed by the characteristics of the geometrical properties of joints. Since the joint geometry properties have a range of values, it is helpful to understand the distribution of these values in order to predict how the extreme values may be compared with the values obtained from a small sample. This work studies three datasets of joint systems (1652 joint data) from nine outcrops of igneous, sedimentary, and metamorphic rocks in order to determine the probability distribution function of the rock joint geometry properties. Consequently, the goodness-of-fit (GOF) tests are applied to obtain the data. According to these GOF tests, the Lognormal is the best probability distribution function representing the joint spacing, aperture, and trace length. The Cauchy is the best probability distribution function for the joint dip angle. It is found that the Cauchy distribution function is the best probability distribution function to represent the joint dip direction of igneous rocks, and the Burr distribution function is the best probability distribution function to define the joint dip direction of the sedimentary and metamorphic rocks.
Rock Mechanics
L. Nikakhtar; Sh. Zare; H. Mirzaei Nasir Abad
Abstract
One of the main issues involved during tunnel construction with tunnel boring machines is the tail gap grouting. This gap is between the external diameter of tunnel lining and the excavation boundary that is filled with high-pressure grouting materials. In this work, three different approaches of gap ...
Read More
One of the main issues involved during tunnel construction with tunnel boring machines is the tail gap grouting. This gap is between the external diameter of tunnel lining and the excavation boundary that is filled with high-pressure grouting materials. In this work, three different approaches of gap grouting modeling in the FLAC3D software are investigated with a special attention to the influence of the grout material hardening process. In the first approach, the grout is modeled as a liquid during injection, and considering the TBM advancement and its hardening time, the grout characteristics are changed to the properties of the solid grouting. In the second approach, the grouting material from the beginning of injection is considered with the properties of solid grouting in the model, and the liquid phase is ignored. In the third approach, without considering the back-filled grouting area in the model geometry, only the injection pressure is applied to the end of the shield and behind the installed segments. The validity of the approaches is evaluated with respect to the maximum ground surface settlement. All the three approaches estimate different surface settlement but the result of the first approach is closer to the monitoring data. Also as a sensitivity analysis, in this work, we investigate the effect of the elastic modulus of liquid and solid grouting materials on the amount of surface settlement that can help to gain a more accurate insight into the effect of grout mixture.
Mohammad Rezaei; Navid Nyazyan
Abstract
Rock drilling is one of the most important processes in the mining operations, which involves high costs. Deep knowledge of the drilling conditions and rock mass properties can help the optimum selection of drilling system, precise determination of type and number of drilling equipment, and accurate ...
Read More
Rock drilling is one of the most important processes in the mining operations, which involves high costs. Deep knowledge of the drilling conditions and rock mass properties can help the optimum selection of drilling system, precise determination of type and number of drilling equipment, and accurate prediction of drilling rate. The above process leads to enhance the drilling efficiency and mining productivity. In this work, relationships between the rock the physico-mechanical properties and horizontal drilling rate (HDR) are investigated. For this purpose, HDR is firstly measured during the drilling process at the Malawi marble quarry mine, Islamabad-e-Gharb, Iran. Then core samples are prepared from the representative minor rock blocks to conduct the laboratory tests and evaluate the influence of rock properties on HDR. The experimental results prove that natural density (ρn), dry density (ρd), slake durability index (Id), Schmidt hammer rebound (SHR), compression wave velocity (Vp), point load index (PLI), uniaxial compressive strength (UCS), and modulus of elasticity (E) have inverse relationships with HDR. Conversely, HDR has a direct relationship with porosity (n), water content (Wa), Los Angeles abrasion (LAA), and Poisson ratio (ν). Generally, it is proved that HDR is more associated with the rock's physical properties than the mechanical characteristics. Moreover, sensitivity analysis confirm that n and ρd are the most and least effective variables on HDR. Furthermore, new optimum empirical equations with acceptable accuracy are proposed to predict HDR based on the statistical modeling. Finally, experimental verification analysis confirm the superiority of this study compared to the prior similar studies.
Environment
Abdollah Yazdi; rahim dabiri; Habib Mollai
Abstract
Geosites and their contents including minerals, fossils, etc. can strongly represent the history of a region. They greatly help our understanding of the evolution of Earth, volcanic activities, plate tectonics, and the characteristics of different environments. These are some of the vital information ...
Read More
Geosites and their contents including minerals, fossils, etc. can strongly represent the history of a region. They greatly help our understanding of the evolution of Earth, volcanic activities, plate tectonics, and the characteristics of different environments. These are some of the vital information about 4500 million years of the Earth's life, and are our common international heritage. Geoconservation’s main purpose is the protection of geosites as major units of geoheritage, and this principle is achieved through the application of specific methods such as indexing geological phenomena, assessment, preservation, valuation, and estimating the importance of each geosite, as well as monitoring (or watching these phenomena). In this paper, geoconservation is introduced as a specialized and essential branch of geological science, which is currently under development. Therefore, geoconservation principles are presented here, and their relation to other geosciences is discussed. In addition, through scientific and cultural education related to sustainable development (in regard to the geoscience), citizens can be informed that lack of conserving natural resources would reduce geo-resources, and on the other hand, is a serious threat to geoheritage of the planet Earth. This crucial subject can be achieved by making information available and by teaching skills by which making prospective and correct decisions is possible.
M. Abedini; M. Ziaii; Y. Negahdarzadeh; J. Ghiasi-Freez
Abstract
The porosity within a reservoir rock is a basic parameter for the reservoir characterization. The present paper introduces two intelligent models for identification of the porosity types using image analysis. For this aim, firstly, thirteen geometrical parameters of pores of each image were extracted ...
Read More
The porosity within a reservoir rock is a basic parameter for the reservoir characterization. The present paper introduces two intelligent models for identification of the porosity types using image analysis. For this aim, firstly, thirteen geometrical parameters of pores of each image were extracted using the image analysis techniques. The extracted features and their corresponding pore types of 682 pores were used for training two intelligent models, BPN (back-propagation network) and SAE (stacked autoencoder). The trained models take the geometrical properties of pores to classify the type of six porosity types including intra-particle, inter-particle, vuggy, moldic, biomoldic, and fracture. The MSE values for the BPN and SAE models were found to be 0.0042 and 0.0038, respectively. The precision, recall, and accuracy of the intelligent models for classifying the types of pores were calculated. The BPN model was able to correctly recognize 193 intra-particle pores out of 197 ones, 45 inter-particle pores out of 50 ones, 7 vuggy pores out of 9 ones, 10 moldic pores out of 12 ones, 2 biomoldic pores out of 3 ones, and 6 fractures out of 7 ones. Also the SAE model was able to correctly classify 193 intra-particle pores out of 197 ones, 46 inter-particle pores out of 50 ones, 8 vuggy pores out of 9 ones, 10 moldic pores out of 12 ones, 3 biomoldic pores out of 3 ones, and 7 fractures out of 7 ones. The results obtained showed that the SAE model carried out a bit more accuracy for classification of the inter-particle, vuggy, biomoldic, and fracture pores.
Rock Mechanics
Seyed M. Fatemi Aghda; M. Kianpour; M. Talkhablou
Abstract
In this research, the relationship between P-wave velocity (Vp) and Electrical Resistivity (ER) parameters with rock mass quality indices is investigated; parameters such as rock mass quality classification (Q) and modified system for sedimentary rocks, known as Qsrm. For making predictive models, about ...
Read More
In this research, the relationship between P-wave velocity (Vp) and Electrical Resistivity (ER) parameters with rock mass quality indices is investigated; parameters such as rock mass quality classification (Q) and modified system for sedimentary rocks, known as Qsrm. For making predictive models, about 1200 data-sets extracted from sections drilled in Seymareh and Karun 2 Dam Sites (SDS and KDS) in Asmari Formation, south-west Iran. Statistical and fuzzy methods used to study the relationships between physical characteristics and rock mass quality. Since in Qsrm classification, the existence of cavities, layering and rock texture is considered in addition to the parameters considered in the Q classification; therefore, it provides a better description of rock mass and is closely related with Vp and ER parameters. The obtained equations for predicting Q and Qsrm showed the determination coefficients (R2) 0.48 and 0.67, respectively, and the coefficient of determination 0.86 for Qsrm calculated from the fuzzy model. Finally, Mean Absolute Deviation (MAD), Variance Accounted For (VAF) and Root Mean Square Error (RMSE) used to check the prediction performance of statistical and fuzzy methods. The results of the calculated errors also showed that fuzzy models are interesting because they have good accuracy for predicting Qsrm. In addition, by increasing the degree of karstifiction, the efficiency of the geophysical method for estimate of Q decreases rapidly, this is due to ignoring the cavities in these categories.
Seyyed S. Ghannadpour; A. Hezarkhani
Abstract
In several uranium (U) prospecting projects in Iran, particularly Central Iran, the association and enrichment of rare earth elements (REEs) are known as the usual features. Sometimes the association of REEs and U with high economic perspective has caused that the relation between the rare earth and ...
Read More
In several uranium (U) prospecting projects in Iran, particularly Central Iran, the association and enrichment of rare earth elements (REEs) are known as the usual features. Sometimes the association of REEs and U with high economic perspective has caused that the relation between the rare earth and radioactive elements is taken into consideration in other types of mineralization, and if there is any relation, radioactivity will be applied in the exploration of REEs. In the current work, sampling from Baghak anomaly in the Sangan mines is carried out based on the radioactivity and radiation measurement methods (as the optimal sampling pattern). In fact, the goal of this work is to survey the presence or absence of such a relation in a skarn mine, which is a different case study from Central Iran. In the case of presence, this will lead to a new exploration method and sampling pattern for REEs. The mineralogical studies (based on the optical and electronic microscopic observations), statistical investigations, and geochemical analyses are applied in this research work. The results obtained from the statistical studies show that the Baghak anomaly due to involving a significant amount of U, Ce, and La and a high concentration of REEs can be considered as one of the important mines. Spider diagrams and their geochemical investigations include the features that are typical of the subduction-related magmas in the calcalkaline volcanic arcs of the continental active margins. The chondrite-normalized REE pattern shows the enrichment of LREE, and a positive pattern close to flat HREE due to the entry of LREE ions into the allanites network. The mineralogical study results also confirm that REEs (especially Ce) are accumulated as a solid solution in the allanite minerals. Moreover, from the mineralogical, geochemical, and statistical analyses, it can be observed that in addition to the presence of such a relation in the mentioned mineralization (Central Iran mineralizations), there is an acceptable correlation between these elements in the Baghak iron-skarn mineralization. Eventually, it can be said that the idea and introduced method for the exploration of REEs in this work could present a new viewpoint to the decision-makers of this industry.
J. Abdollahei Sharif; A. Jafarpour; S. Yousefi
Abstract
The computer-based 3D modeling of ore bodies is one of the most important steps in the resource estimation, grade determination, and production scheduling of open-pit mines. In the modeling phase, the volume of the orebody model is required to be filled by the blocks and sub-blocks. The determination ...
Read More
The computer-based 3D modeling of ore bodies is one of the most important steps in the resource estimation, grade determination, and production scheduling of open-pit mines. In the modeling phase, the volume of the orebody model is required to be filled by the blocks and sub-blocks. The determination of Block Size (BS) is important due to the dependence of the geostatistical issues and calculations related to mining capabilities on it. There are some factors effective in the determination of an optimal BS including the metal content, estimation error, recovery percentage, mining ability, safety, and dilution. In this work, an optimal BS is determined using a two-stage approach. In the proposed approach, the Fuzzy Delphi Analytic Hierarchy Process (FDAHP) and Fuzzy Multi-Objective Optimization by Ratio Analysis (FMOORA) methods are used. In the first phase, the weight of each criterion is calculated based on the opinions of the experts using the FDAHP method. In the second phase, the FMOORA method is applied in order to determine a suitable BS for the design and operation of mining considering the extracted weights in the previous phase. The block model of the Sungun copper mine is studied as a case study to evaluate the capability of the proposed approach. The results of implementation of this approach are desirable because of converting the opinions of the experts to fuzzy values, weighing the experts according to the experience and technical knowledge, weighting the criteria by FDAHP, and choosing the optimal option with FMOORA. Furthermore, the 12.5×12.5×12.5 m3 block (A5) is chosen as an appropriate BS, which is compatible with the real conditions of the studied mine.
Zohreh Nabavi; Mohammad Mirzehi; Hesam Dehghani; Pedram Ashtari
Abstract
Back-break is one of the adverse effects of blasting, which results in unstable mine walls, high duration, falling machinery, and inappropriate fragmentation. Thus, the economic benefits of the mine are reduced, and safety is severely affected. Back-break can be influenced by various parameters such ...
Read More
Back-break is one of the adverse effects of blasting, which results in unstable mine walls, high duration, falling machinery, and inappropriate fragmentation. Thus, the economic benefits of the mine are reduced, and safety is severely affected. Back-break can be influenced by various parameters such as rock mass properties, blast geometry, and explosive properties. Therefore, during the blasting process, back-break must be accurately predicted, and other production activities must be done to prevent and reduce its adverse effects. In this regard, a hybrid model of extreme gradient boosting (XGB) is proposed for predicting back-break using gray wolf optimization (GWO) and particle swarm optimization (PSO). Additionally, validation of the hybrid model is conducted using XGBoost, gene expression programming (GEP), random forest (RF), linear multiple regression (LMR), and non-linear multiple regression (NLMR) methods. For this purpose, the data obtained from 90 blasting operations in the Chadormalu iron ore mine are collected by considering the parameters of the blast pattern design. According to the results obtained, the performance and accuracy level of hybrid models including GWO-XGB (R2 = 99, RMSE = 0.01, MAE = 0.001, VAF = 0.99, a-20 = 0.98), and PSO-XGB (99, 0.01, 0.001, 0.99, 0.98) are better than the XGBoost (97, 0.185, 0.132, 0.98, 95), GEP (96, 0.233, 0.186, 0.967, 0.935), RF (97, 0.210, 0.156, 0.97, 0.94), LMR (96, 0.235, 0.181, 0.964, 0.92), and NLMR (96, 0.229, 0.177, 0.968, 0.93) models. Notably, the GWO-XGB hybrid model has superior overall performance as compared to the PSO-XGB model. Based on the sensitivity analysis results, hole depth and stemming are the essential effective parameters for back-break.
Rock Mechanics
Ghorban Khandouzi; Mohammad Hossein Khosravi
Abstract
Granular materials used in engineering structures tend to experience arching under different geotechnical factors. Arching is a factor of load transfer from the destroyed zone to stable areas in these structures. Soil arching plays an important role in stress redistribution, settlement, and load on supports ...
Read More
Granular materials used in engineering structures tend to experience arching under different geotechnical factors. Arching is a factor of load transfer from the destroyed zone to stable areas in these structures. Soil arching plays an important role in stress redistribution, settlement, and load on supports in tunneling. This paper reviews the effect of various parameters on the development of soil arching and formation of expansion and contraction zones around the tunnel. A comprehensive literature review, analysis of new published papers, and investigations were conducted to study the effects of various parameters on soil arching. The results were obtained by studying the formation of shear bands, deformed zones, and their development. The achieved results of investigations show that soil arching and ground deformation around tunnels in sandy grounds are complex phenomena that require careful consideration during tunnel construction. Also the results reveal that despite the arching zone, a loosened zone with non-linear slip surfaces forms above the tunnel. With the onset of tunnel convergence, initial non-linear sliding surfaces appear, and the arching area forms above the tunnel. When tunnel convergence increases, a stable arch forms inside the arching zone, and a de-stressed area as a loosened zone is created under the stable arch. Understanding of soil arching, ground deformation, and the stable arch formed inside the arching zone around tunnels in sandy grounds is very important for the engineers evaluating stress redistribution and load on tunnel supports. Also understanding these issues can help the designers and practitioners make informed decisions during tunnel construction.
Rock Mechanics
H.C. ZHAO; H.J. An; M.S. Gao
Abstract
Both the deformation characters and the failure mode of the large cross-sectional longwall installation roadway under compound roof are becoming an emergent issue than ever before due to the rapid development of modern mining equipment. Various engineering applications have revealed that the insufficient ...
Read More
Both the deformation characters and the failure mode of the large cross-sectional longwall installation roadway under compound roof are becoming an emergent issue than ever before due to the rapid development of modern mining equipment. Various engineering applications have revealed that the insufficient design and inappropriate support technology are the main reasons for the fatal accidents associated with the sudden roof fall attributed to the separation of the overlying compound strata. The present research work, therefore, starts with a case study using the conventional support technology in order to demonstrate the importance of this issue followed by a summarization of the typical failure mode of the longwall installation roadway under compound strata with varied thicknesses. Then a simplified theoretical model is proposed and set up aiming at a better understanding of the distribution of the elastic-plastic zones as well as the effects of different caving procedures. The finite element analysis software program FLAC3D is adopted to evaluate the effect of the caving method and the reinforcement provided by an additional support. Then a case study conducted at a typical coal mine with compound roof condition is presented to verify the advantages of the proposed design. The results obtained show that the optimized design presented in this research work is effective to control the deformation of the surrounding rock, particularly in terms of separation of the overlying compound strata.