A

  • ABAQUS The impact of poor cementing casing damage: A numerical simulation study [Volume 6, Issue 1, 2015, Pages 41-53]

  • ABAQUS Software An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]

  • Abrasivity index A Correlation for Estimating LCPC Abrasivity Coefficient using Rock Properties [Volume 11, Issue 3, 2020, Pages 799-808]

  • Accident Frequency Rate Risk prediction based on a time series case study: Tazareh coal mine [Volume 7, Issue 1, 2016, Pages 127-134]

  • Accident Severity Rate Risk prediction based on a time series case study: Tazareh coal mine [Volume 7, Issue 1, 2016, Pages 127-134]

  • Acidianus brierleyi Comparison of Copper Dissolution in Chalcopyrite Concentrate Bioleaching with Acidianus Brierleyi in Different Initial pH Values [Volume 11, Issue 3, 2020, Pages 753-764]

  • Acidithiobacillus ferrooxidans XRF analysis of coal bioleaching by chemolithoheterotrophic Alicyclobacillus HRM5 and chemolithoautotrophic Acidithiobacillus ferrooxidans [Volume 9, Issue 3, 2018, Pages 559-566]

  • Acidi Thiobacillus Ferrooxidans Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching [Volume 8, Issue 4, 2017, Pages 523-537]

  • Acid Leaching Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]

  • Acid Mine Drainage Assessment of natural attenuation of acid mine drainage pollutants in El Bierzo and Odiel basins: A case study [Volume 2, Issue 2, 2011, Pages 78-85]

  • Acid Mine Drainage Magnetic Nano mineral and acid mine drainage interaction: An experimental study [Volume 8, Issue 3, 2017, Pages 447-453]

  • Acid Mine Drainage Probabilistic prediction of acid mine drainage generation risk based on pyrite oxidation process in coal washery rejects - A Case Study [(Articles in Press)]

  • Acoustic emission technique Study of Damaged Zone around Circular Opening Using Acoustic Emission Technique [Volume 11, Issue 2, 2020, Pages 433-451]

  • Acoustic Impedance A new stochastic 3D seismic inversion using direct sequential simulation and co-simulation in a genetic algorithm framework [Volume 8, Issue 3, 2017, Pages 321-335]

  • Active Constrain Balancing Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]

  • Adaptive Neuro-Fuzzy Inference System Predicting Unconfined Compressive Strength of Intact Rock Using New Hybrid Intelligent Models [Volume 11, Issue 1, 2020, Pages 231-246]

  • Additives Effects of Flocculant, Surfactant, Coagulant, and Filter Aid on Efficiency of Filtration Processing of Copper Concentrate: Mechanism and Optimization [Volume 11, Issue 1, 2020, Pages 119-141]

  • Adsorption Magnetic Nano mineral and acid mine drainage interaction: An experimental study [Volume 8, Issue 3, 2017, Pages 447-453]

  • Adsorption An innovative application of (NiXZnX–X Fe2O4) Mineral nanoparticles for adsorption of Malachite green dye from wastewater effluents [Volume 9, Issue 1, 2018, Pages 143-152]

  • Adsorption Evaluating performance of natural sepiolite and zeolite nanoparticles for nickel, antimony, and arsenic removal from synthetic wastewater [Volume 9, Issue 4, 2018, Pages 1049-1064]

  • Adsorption Pre-treatment of toxic element and cationic dye onto natural biomass: characterization and optimization [Volume 10, Issue 3, 2019, Pages 649-658]

  • Adsorption Comparative and Competitive Study of LDH/Diatomite and Chitosan/Diatomite for Adsorptive Removal of Chloride Ion from Aqueous Solution [Volume 11, Issue 1, 2020, Pages 261-279]

  • Adsorption Investigation of Mechanism of Adsorption of Xanthate and Hydroxamate on Malachite [Volume 11, Issue 3, 2020, Pages 921-933]

  • Adsorption Experimental Studies, Response Surface Methodology and Molecular Modeling for Optimization and Mechanism Analysis of Methylene Blue Dye Removal by Different Clays [(Articles in Press)]

  • Adsorption mechanism Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]

  • Advanced dewatering Determination of ground water quality associated with lignite mining in arid climate [Volume 1, Number 1, 2010]

  • Advanced Inverse Distance Squared (AIDS) Comparing ordinary kriging and advanced inverse distance squared methods based on estimating coal deposits; case study: East-Parvadeh deposit, central Iran [Volume 9, Issue 3, 2018, Pages 753-760]

  • Advance rate Introducing hard rock TBMs’ downtime analysis model with reference to past case histories’ data [Volume 9, Issue 2, 2018, Pages 457-472]

  • Advance rate TBM Tunneling Construction Time with Respect to Learning Phase Period and Normal Phase Period [Volume 11, Issue 2, 2020, Pages 539-554]

  • Aeromagnetic Data Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]

  • Agh-Dareh Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]

  • Aghdarre Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill [Volume 5, Issue 2, 2014, Pages 121-128]

  • Agriculture plants Metal extraction competence of plants on waste dumps of magnesite mine, Salem District, South India [Volume 4, Issue 2, 2013, Pages 113-124]

  • AG/SAG Mill Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]

  • AHP Comparison of various knowledge-driven and logistic-based mineral prospectivity methods to generate Cu and Au exploration targets Case study: Feyz-Abad area (North of Lut block, NE Iran) [Volume 8, Issue 4, 2017, Pages 611-629]

  • AHP Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]

  • Air Column Effect of air column in transport canisters on measured gas contents of coal [Volume 8, Issue 1, 2017, Pages 1-9]

  • Airflow Airflow inside tunnel boring machine: A numerical study and an experimental verification [Volume 10, Issue 3, 2019, Pages 623-632]

  • Alborz-Sharghi Environmental Impact Assessment of Coal Washing Plant (Alborz- Sharghi –Iran) [Volume 3, Issue 2, 2012, Pages 69-77]

  • Alicyclobacillus XRF analysis of coal bioleaching by chemolithoheterotrophic Alicyclobacillus HRM5 and chemolithoautotrophic Acidithiobacillus ferrooxidans [Volume 9, Issue 3, 2018, Pages 559-566]

  • Alkaline Roasting Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]

  • Alluvial Operational dynamics of “Galamsey” within eleven selected districts of western region of Ghana [Volume 8, Issue 1, 2017, Pages 11-34]

  • Alpha Assessment of radioactive contamination in water bodies around mine workings using radiation counter [Volume 9, Issue 4, 2018, Pages 795-806]

  • Alteration A fuzzy-based prognosis of ore mineralization potentials in Ramand region (Qazvin province) [Volume 8, Issue 3, 2017, Pages 403-418]

  • Alteration Application of fractal modeling to delineate alteration zones and lithological units in Masjed-Daghi Cu-Au porphyry deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 339-356]

  • Alteration halos Application of alteration index and zoning for Pb-Znexploration in Haft-Savaran area, Khomein, Iran [Volume 9, Issue 1, 2018, Pages 229-242]

  • Alteration Index Selection of new exploration targets using lithogeochemical data obtained for Taknar deposit located in NE of Iran [Volume 6, Issue 1, 2015, Pages 11-20]

  • Alteration Index Application of alteration index and zoning for Pb-Znexploration in Haft-Savaran area, Khomein, Iran [Volume 9, Issue 1, 2018, Pages 229-242]

  • Alteration Zones Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]

  • Alteration Zones Delineation of alteration zones based on artificial neural networks and concentration-volume fractal methods in the hypogene zone of porphyry copper-gold deposit, Masjed-Daghi, East Azerbaijan Province, Iran [Volume 10, Issue 4, 2019, Pages 883-901]

  • Aluminum Estimating the function of copper consumption in Iran between 1991- 2011 using Johansen model [Volume 6, Issue 2, 2015, Pages 183-189]

  • AMD Gold, Silver and Iron in Iron Oxy-hydroxide Precipitate Formed in Process of Acid Mine Drainage [Volume 11, Issue 2, 2020, Pages 335-346]

  • Ammoniacal carbonate leaching Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]

  • Analytical Methods On Analytic Solutions of Elastic Net Displacements around a Circular Tunnel [Volume 11, Issue 2, 2020, Pages 419-432]

  • Analytical Solutions Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]

  • Andesite rocks A Modified Schimazek’s F-abrasiveness Factor for Evaluating Abrasiveness of Andesite Rocks in Rock Sawing Process [Volume 11, Issue 2, 2020, Pages 563-575]

  • AN-EUL Method AN-EUL method for automatic interpretation of potential field data in unexploded ordnances (UXO) detection [Volume 5, Issue 2, 2014, Pages 67-77]

  • ANFIS Adaptive Neuro-Fuzzy Inference System application for hydrothermal alteration mapping using ASTER data [Volume 4, Issue 2, 2013, Pages 83-96]

  • ANFIS A New Method for Predicting Indirect Tensile Strength of Sandstone Rock Samples [Volume 11, Issue 3, 2020, Pages 899-908]

  • ANFIS-DE Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]

  • ANFIS-Fuzzy C-Means Clustering Method Prediction of slope stability using adaptive neuro-fuzzy inference system based on clustering methods [Volume 8, Issue 2, 2017, Pages 163-177]

  • ANFIS-Grid Partitioning Prediction of slope stability using adaptive neuro-fuzzy inference system based on clustering methods [Volume 8, Issue 2, 2017, Pages 163-177]

  • ANFIS-PSO Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]

  • ANFIS-Subtractive Clustering Method Prediction of slope stability using adaptive neuro-fuzzy inference system based on clustering methods [Volume 8, Issue 2, 2017, Pages 163-177]

  • Anion exchange Comparative and Competitive Study of LDH/Diatomite and Chitosan/Diatomite for Adsorptive Removal of Chloride Ion from Aqueous Solution [Volume 11, Issue 1, 2020, Pages 261-279]

  • Anionic and Cationic Collectors A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]

  • Anionic collector Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]

  • ANN Use of artificial intelligence techniques to predict distribution of heavy metals in groundwater of Lakan lead-zinc mine in Iran [Volume 8, Issue 1, 2017, Pages 35-48]

  • Anomaly Local multivariate outliers as geochemical anomaly halos indicators, a case study: Hamich area, Southern Khorasan, Iran [Volume 8, Issue 2, 2017, Pages 179-189]

  • Anomaly separation A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]

  • Anomaly separation Detection of Mo geochemical anomaly in depth using a new scenario based on spectrum–area fractal analysis [Volume 10, Issue 3, 2019, Pages 695-704]

  • Ant Colony algorithm Ant colony algorithm as a high-performance method in resource estimation using LVA field; A case study: Choghart Iron ore deposit [Volume 10, Issue 3, 2019, Pages 667-678]

  • Anthropogenic Heavy metal pollution and identification of their sources in soil over Sangan iron-mining region, NE Iran [Volume 8, Issue 2, 2017, Pages 277-289]

  • Approximate inversion Approximate resistivity and susceptibility mapping from airborne electromagnetic and magnetic data, a case study for a geologically plausible porphyry copper unit in Iran [Volume 4, Issue 2, 2013, Pages 133-146]

  • Aquifers Determination of ground water quality associated with lignite mining in arid climate [Volume 1, Number 1, 2010]

  • Arsenic Predicting Arsenic Behavior in the Wastewater of Mouteh Gold Plant by Geochemical Modeling [Volume 4, Issue 1, 2013, Pages 57-65]

  • Arsenic Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash [Volume 9, Issue 2, 2018, Pages 319-330]

  • Artificial Neural Network Prediction of recovery of gold thiosulfate on activated carbon using artificial neural networks [Volume 5, Issue 1, 2014, Pages 55-66]

  • Artificial Neural Network Application of artificial neural network and genetic algorithm to modelling the groundwater inflow to an advancing open pit mine [Volume 6, Issue 1, 2015, Pages 21-30]

  • Artificial Neural Network Estimation of Cadmium and Uranium in a stream sediment from Eshtehard region in Iran using an Artificial Neural Network [Volume 7, Issue 1, 2016, Pages 97-107]

  • Artificial Neural Network A comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran [Volume 9, Issue 4, 2018, Pages 917-940]

  • Artificial Neural Network Prediction of Blasting Cost in Limestone Mines Using Gene Expression Programming Model and Artificial Neural Networks [Volume 11, Issue 1, 2020, Pages 281-300]

  • Artificial Neural Networks Predicting peak particle velocity by artificial neural networks and multivariate regression analysis - Sarcheshmeh copper mine, Kerman, Iran [Volume 4, Issue 2, 2013, Pages 125-132]

  • Artificial Neural Networks Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]

  • Artificial Neural Networks Delineation of alteration zones based on artificial neural networks and concentration-volume fractal methods in the hypogene zone of porphyry copper-gold deposit, Masjed-Daghi, East Azerbaijan Province, Iran [Volume 10, Issue 4, 2019, Pages 883-901]

  • Artificial Stone Production of artificial stone slabs using waste granite and marble stone sludge samples [Volume 7, Issue 1, 2016, Pages 135-141]

  • Artisanal mining Mining and Environmental Degradation: a Gift Brings Grief Scenario for Mining Communities in Sierra Leone [Volume 11, Issue 2, 2020, Pages 347-361]

  • Artisanal Small-Scale Mining Operational dynamics of “Galamsey” within eleven selected districts of western region of Ghana [Volume 8, Issue 1, 2017, Pages 11-34]

  • Ash Evaluation of coalbed methane potential in Parvadeh IV coal deposit in central Iran using a combination of MARS modeling and Kriging [Volume 8, Issue 2, 2017, Pages 305-319]

  • Asmari Limestone Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]

  • Asperity Fractal-wavelet-fusion-based re-ranking of joint roughness coefficients [Volume 10, Issue 4, 2019, Pages 1121-1133]

  • ASTER Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]

  • ASTER Anomaly delineation of porphyry copper deposits of Hanza Region through geochemical data analyses and multispectral remote sensing [Volume 10, Issue 3, 2019, Pages 747-762]

  • Astragalus Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]

  • Athelia Bombacina biomass Pre-treatment of toxic element and cationic dye onto natural biomass: characterization and optimization [Volume 10, Issue 3, 2019, Pages 649-658]

  • Atomic Force Microscopy Exploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study [Volume 9, Issue 4, 2018, Pages 1009-1018]

  • Attenuation Numerical analysis of energy transmission through discontinuities and fillings in Kangir Dam [Volume 7, Issue 2, 2016, Pages 251-259]

  • Automatic Interpretation AN-EUL method for automatic interpretation of potential field data in unexploded ordnances (UXO) detection [Volume 5, Issue 2, 2014, Pages 67-77]

  • Auxiliary Ventilation Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]

  • Avanj porphyry system A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]

  • Average fragment size Blast Design for Improved Productivity using a Modified Available Energy Method [Volume 11, Issue 3, 2020, Pages 643-659]

  • Axial Load An experimental study of axial load transfer mechanisms of cable bolts using axially split embedment apparatus [Volume 8, Issue 2, 2017, Pages 131-137]

B

  • Back-Propagation Neural Network Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]

  • Bacteria Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching [Volume 8, Issue 4, 2017, Pages 523-537]

  • Baghqloom-Kerman Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]

  • Ball Mill Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills [Volume 2, Issue 1, 2011]

  • Ball Mill Combined DEM and SPH simulation of ball milling [Volume 10, Issue 1, 2019, Pages 151-161]

  • Banding fracture Physical modelling of caving propagation process and damage profile ahead of the cave-back [(Articles in Press)]

  • Band ratio Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]

  • Bandwidth Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]

  • Batch settling test A new approach to define batch settling curves for analyzing the sedimentation characteristics [Volume 3, Issue 2, 2012, Pages 103-111]

  • Bauxite Iron leaching from bauxite ore in hydrochloric acid using response surface methodology [Volume 6, Issue 1, 2015, Pages 103-108]

  • Bauxite Investigation of parameters affecting desilication of diasporic bauxite in Jajarm mine by thermo-chemical treatment [Volume 8, Issue 1, 2017, Pages 75-81]

  • Bauxite Modelling and optimization of digestion efficiency of bauxite in Bayer process: Iran Alumina company [Volume 10, Issue 3, 2019, Pages 799-809]

  • Bayer Process Investigation of parameters affecting desilication of diasporic bauxite in Jajarm mine by thermo-chemical treatment [Volume 8, Issue 1, 2017, Pages 75-81]

  • Bayer Process Gallium extraction from Jajarm Bayer process liquor using micro-emulsions [Volume 8, Issue 2, 2017, Pages 269-276]

  • Bayer Process Modelling and optimization of digestion efficiency of bauxite in Bayer process: Iran Alumina company [Volume 10, Issue 3, 2019, Pages 799-809]

  • Bayesian Analysis Bayesian prediction of rotational torque to operate horizontal drilling [Volume 10, Issue 2, 2019, Pages 507-515]

  • Bayesian decision making tool Application of Bayesian decision making tool in detecting oil-water contact in a carbonate reservoir [Volume 5, Issue 2, 2014, Pages 91-97]

  • Beach Slope Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]

  • Beam-Spring method Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel) [Volume 8, Issue 1, 2017, Pages 111-130]

  • Beheshtabad Tunnel Estimation of groundwater inflow situation using fuzzy logic: a case study (Beheshtabad water conveying tunnel, Iran) [Volume 7, Issue 2, 2016, Pages 229-238]

  • Beta Assessment of radioactive contamination in water bodies around mine workings using radiation counter [Volume 9, Issue 4, 2018, Pages 795-806]

  • BEV UPL determination of multi-element deposits with grade uncertainty using a new block economic value calculation approach [Volume 9, Issue 1, 2018, Pages 61-72]

  • Bi-Material Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]

  • Bimetallic Deposits Optimal production strategy of bimetallic deposits under technical and economic uncertainties using stochastic chance-constrained programming [Volume 8, Issue 3, 2017, Pages 475-485]

  • Bimrocks Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]

  • Bimslopes Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]

  • Bingham plastic model Numerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: A case study of Bakhtiary Dam of Iran [Volume 4, Issue 1, 2013, Pages 15-26]

  • Bio-accumulation Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]

  • Bio-Availability Evaluation of background geochemical speciation of heavy metals in overburden topsoil of bituminous sand deposit area, Ondo state, Nigeria [Volume 10, Issue 4, 2019, Pages 869-882]

  • Bioconcentration Factor (BCF) Phytoextraction-based process of metal absorption from soil in mining areas (tailing dams) by Medicago sativa L. (Alfalfa) (Case study: Sarcheshmeh porphyry copper mine, SE of Iran) [Volume 8, Issue 3, 2017, Pages 419-431]

  • Biogeography-Based Optimization Algorithm Use of artificial intelligence techniques to predict distribution of heavy metals in groundwater of Lakan lead-zinc mine in Iran [Volume 8, Issue 1, 2017, Pages 35-48]

  • Bioleaching Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching [Volume 8, Issue 4, 2017, Pages 523-537]

  • Bioleaching Comparison of Copper Dissolution in Chalcopyrite Concentrate Bioleaching with Acidianus Brierleyi in Different Initial pH Values [Volume 11, Issue 3, 2020, Pages 753-764]

  • Biomass Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium [Volume 1, Number 1, 2010]

  • Biosorption Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium [Volume 1, Number 1, 2010]

  • Bishop and Janbu methods Investigation of Bishop’s and Janbu’s Models Capabilities on Slope Stability Problems with Special Consideration to Open-Pit Mining Operations [Volume 11, Issue 1, 2020, Pages 161-170]

  • Bit Nozzle Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]

  • Blakely Algorithm AN-EUL method for automatic interpretation of potential field data in unexploded ordnances (UXO) detection [Volume 5, Issue 2, 2014, Pages 67-77]

  • Blast block size Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]

  • Blast-Induced Vibration Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm [Volume 8, Issue 2, 2017, Pages 291-304]

  • Blasting Monitoring and assessment of pollutants resulting from bench-blasting operations [Volume 7, Issue 1, 2016, Pages 109-118]

  • Blasting Numerical analysis of energy transmission through discontinuities and fillings in Kangir Dam [Volume 7, Issue 2, 2016, Pages 251-259]

  • Blasting Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm [Volume 8, Issue 2, 2017, Pages 291-304]

  • Blasting A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]

  • Blasting Investigating and Ranking Blasting Patterns to Reduce Ground Vibration using Soft Computing Approaches and MCDM Technique [Volume 11, Issue 3, 2020, Pages 881-897]

  • Blasting Sensitivity analysis of stress and cracking in rock mass blasting using numerical modelling [(Articles in Press)]

  • Blasting Cost Prediction of Blasting Cost in Limestone Mines Using Gene Expression Programming Model and Artificial Neural Networks [Volume 11, Issue 1, 2020, Pages 281-300]

  • Blasting Evaluation A quantitative model for evaluation and classification of blastings in open-pit mines [Volume 9, Issue 1, 2018, Pages 127-141]

  • Blasting optimization Blast Design for Improved Productivity using a Modified Available Energy Method [Volume 11, Issue 3, 2020, Pages 643-659]

  • Blasting Results A quantitative model for evaluation and classification of blastings in open-pit mines [Volume 9, Issue 1, 2018, Pages 127-141]

  • Blast operations Predicting peak particle velocity by artificial neural networks and multivariate regression analysis - Sarcheshmeh copper mine, Kerman, Iran [Volume 4, Issue 2, 2013, Pages 125-132]

  • Blast Vibration Magnitude of vibration triggering component determines safety of structures [Volume 5, Issue 1, 2014, Pages 35-46]

  • Blind Mineralization Prediction of mineral deposit model and identification of mineralization trend in depth using frequency domain of surface geochemical data in Dalli Cu-Au porphyry deposit [Volume 6, Issue 2, 2015, Pages 225-236]

  • Block Economic Value Robust production scheduling in open-pit mining under uncertainty: a box counterpart approach [Volume 8, Issue 2, 2017, Pages 255-267]

  • Block-Flexural Toppling Numerical Modeling of Rock Slopes with a Potential of Block-Flexural Toppling Failure [Volume 11, Issue 1, 2020, Pages 247-259]

  • Block Sequencing Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects [Volume 11, Issue 2, 2020, Pages 577-586]

  • Block size determination A Hybrid Fuzzy MCDM Approach to Determine an Optimal Block Size in Open-Pit Mine Modeling: a Case Study [Volume 11, Issue 2, 2020, Pages 611-627]

  • Boosting and Bagging Strategies Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]

  • Bouguer Anomaly Subsurface modeling of mud volcanoes, using density model and analysis of seismic velocity [Volume 6, Issue 1, 2015, Pages 31-39]

  • Bound Constraint 3D gravity data-space inversion with sparseness and bound constraints [Volume 8, Issue 2, 2017, Pages 227-235]

  • Bourgoyne and Young Model Determination of constant coefficients of Bourgoyne and Young drilling rate model using a novel evolutionary algorithm [Volume 8, Issue 4, 2017, Pages 693-702]

  • Brazilian Tensile Strength Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties [Volume 10, Issue 4, 2019, Pages 917-928]

  • Breakage Function Determination Software Effect of thermal treatment on specific rate of breakage of manganese ore [Volume 9, Issue 2, 2018, Pages 339-348]

  • Brittleness Index A new brittleness index for estimation of rock fracture toughness [Volume 8, Issue 1, 2017, Pages 83-91]

  • Building stone Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]

C

  • Cable Bolt Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]

  • Cable Bolts An experimental study of axial load transfer mechanisms of cable bolts using axially split embedment apparatus [Volume 8, Issue 2, 2017, Pages 131-137]

  • Cadmium Estimation of Cadmium and Uranium in a stream sediment from Eshtehard region in Iran using an Artificial Neural Network [Volume 7, Issue 1, 2016, Pages 97-107]

  • C-A fractal A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]

  • Cake formation rate Effects of Flocculant, Surfactant, Coagulant, and Filter Aid on Efficiency of Filtration Processing of Copper Concentrate: Mechanism and Optimization [Volume 11, Issue 1, 2020, Pages 119-141]

  • Calcrete Investigation of blind massive sulphide deposit signatures in the calcrete layers as a geochemical barrier: A case study of Areachap, Kantienpan and Copperton deposits [Volume 2, Issue 2, 2011, Pages 86-101]

  • Canister Effect of air column in transport canisters on measured gas contents of coal [Volume 8, Issue 1, 2017, Pages 1-9]

  • Capacity Optimal production strategy of bimetallic deposits under technical and economic uncertainties using stochastic chance-constrained programming [Volume 8, Issue 3, 2017, Pages 475-485]

  • Carbonate Rocks Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]

  • Carbon emissions Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]

  • Casing damage The impact of poor cementing casing damage: A numerical simulation study [Volume 6, Issue 1, 2015, Pages 41-53]

  • Catastrophic Events Method of Grading Subway Stations Based on Evacuation Capability: A Quantitative Method [Volume 11, Issue 2, 2020, Pages 587-609]

  • Cavability assessment Physical modelling of caving propagation process and damage profile ahead of the cave-back [(Articles in Press)]

  • Cavability Index Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]

  • Caved Material System Long-term stability analysis of goaf area in longwall mining using minimum potential energy theory [Volume 9, Issue 1, 2018, Pages 169-182]

  • Cave mining Physical modelling of caving propagation process and damage profile ahead of the cave-back [(Articles in Press)]

  • Cavern Closure Feasibility study of underground salt caverns in Western Newfoundland: experimental and finite element investigation of creep-induced damage [Volume 6, Issue 2, 2015, Pages 205-224]

  • Caving Zone (CZ) Extension of Excavation Damaged Zone Due to Longwall Working Effect [Volume 7, Issue 1, 2016, Pages 13-24]

  • CCWSIM Algorithm A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]

  • Cd2+ Box-Behnken Design of Experiments Investigation forAdsorption of Cd2+ onto carboxymethyl Chitosan Magnetic Nanoparticles [Volume 3, Issue 1, 2012, Pages 51-59]

  • Cd2+ Removal Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]

  • CDS Processing a multifold ground penetration radar data using common-diffraction-surface stack method [Volume 10, Issue 3, 2019, Pages 777-785]

  • Cement Company Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm [Volume 8, Issue 2, 2017, Pages 291-304]

  • Cementing Job The impact of poor cementing casing damage: A numerical simulation study [Volume 6, Issue 1, 2015, Pages 41-53]

  • Centrifugal modeling Influence of modeling material on undercut slope failure mechanism [Volume 8, Issue 4, 2017, Pages 645-662]

  • Cerchar Abrasion Test Determination of scratching energy index for Cerchar abrasion test [Volume 9, Issue 1, 2018, Pages 73-89]

  • CERCHAR Abrasivity Index Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties [Volume 10, Issue 4, 2019, Pages 917-928]

  • Cerrusite Implementation of flotation and gravity separation, to process Changarzeh sulfide-oxide lead ore [Volume 3, Issue 2, 2012, Pages 79-87]

  • CFD Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution [Volume 9, Issue 3, 2018, Pages 547-557]

  • CFD Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]

  • CFD Simulation DPM flow pattern of LHD in underground mines with different ventilation conditions [Volume 10, Issue 2, 2019, Pages 315-326]

  • Chadormalu Mine A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]

  • Chah Gaz Detection of Zones Based on Ore and Gangue Using Fractal and Multivariate Analysis in Chah Gaz Iron Ore Deposit, Central Iran [Volume 11, Issue 2, 2020, Pages 453-466]

  • Chain Saw Machine Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]

  • Chalcocite Collectorless flotation of Chalcocite by controlling redox potential [Volume 3, Issue 2, 2012, Pages 99-102]

  • Chalcocite Kinetics of chemical leaching of chalcocite from low-grade copper ore: size-distribution behavior [Volume 6, Issue 1, 2015, Pages 109-118]

  • Chalcocite Geochemistry, petrology, and mineralization in volcanic rocks located in south Neyshabour, NE Iran [Volume 8, Issue 2, 2017, Pages 139-154]

  • Chalcopyrite Exploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study [Volume 9, Issue 4, 2018, Pages 1009-1018]

  • Chalcopyrite Comparison of Copper Dissolution in Chalcopyrite Concentrate Bioleaching with Acidianus Brierleyi in Different Initial pH Values [Volume 11, Issue 3, 2020, Pages 753-764]

  • Chan Fa Machine Operational dynamics of “Galamsey” within eleven selected districts of western region of Ghana [Volume 8, Issue 1, 2017, Pages 11-34]

  • Chein’s Equation A New Approach for Obtaining Settling Velocity in a Thickener Using Statistical Regression: A Case Study [Volume 7, Issue 1, 2016, Pages 47-56]

  • Chemorex CP-150 Solvent extraction of copper from an industrial sulfate liquor using Chemorex CP-150 [Volume 9, Issue 4, 2018, Pages 905-916]

  • Cheshmeh-Konan Copper Deposit Metal(loid) uptake of Sonchus oleraceus grown around Cheshmeh-Konan copper deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 517-528]

  • Chloride Comparative and Competitive Study of LDH/Diatomite and Chitosan/Diatomite for Adsorptive Removal of Chloride Ion from Aqueous Solution [Volume 11, Issue 1, 2020, Pages 261-279]

  • Choghart Deposit Ant colony algorithm as a high-performance method in resource estimation using LVA field; A case study: Choghart Iron ore deposit [Volume 10, Issue 3, 2019, Pages 667-678]

  • Choghart Iron Ore Mine Rock mass structural data analysis using image processing techniques (Case study: Choghart iron ore mine northern slopes) [Volume 8, Issue 1, 2017, Pages 61-74]

  • Choqart Iron Waste Concentration and recycling of rare earth elements (REEs) from iron mine waste using a combination of physical separation methods [Volume 7, Issue 2, 2016, Pages 195-203]

  • Chromite Processing Plant Selection of chromite processing plant site using fuzzy analytic hierarchy process (FAHP) [Volume 8, Issue 2, 2017, Pages 155-162]

  • Circuit Design Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]

  • Circular diamond saw wear Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process [Volume 10, Issue 3, 2019, Pages 559-574]

  • Circular hole rock sample and FLAC3D Study of Damaged Zone around Circular Opening Using Acoustic Emission Technique [Volume 11, Issue 2, 2020, Pages 433-451]

  • Circular opening Study of Damaged Zone around Circular Opening Using Acoustic Emission Technique [Volume 11, Issue 2, 2020, Pages 433-451]

  • Circular Tunnel On Analytic Solutions of Elastic Net Displacements around a Circular Tunnel [Volume 11, Issue 2, 2020, Pages 419-432]

  • Classification Modelling of the kaolin deposits and reserve classification challenges of Charentes Basin, France [Volume 1, Number 1, 2010]

  • Classification A quantitative model for evaluation and classification of blastings in open-pit mines [Volume 9, Issue 1, 2018, Pages 127-141]

  • Classification A Comparative Study of SVM and RF Methods for Classification of Alteration Zones Using Remotely Sensed Data [Volume 11, Issue 1, 2020, Pages 49-61]

  • Classification Assessment of Terrain and Land Use/Land Cover Change of Mine Sites Using Geospatial Techniques in Plateau State, Nigeria [(Articles in Press)]

  • Classification System A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]

  • Clay Minerals Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]

  • Clay Soil Mechanical Properties of Low Plasticity Clay Soil Stabilized with Iron Ore Mine Tailing and Portland Cement [Volume 11, Issue 3, 2020, Pages 837-853]

  • Cleaning Stage Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade [Volume 8, Issue 4, 2017, Pages 539-544]

  • Closed and Open Number System Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]

  • Clustering Investigating and Ranking Blasting Patterns to Reduce Ground Vibration using Soft Computing Approaches and MCDM Technique [Volume 11, Issue 3, 2020, Pages 881-897]

  • Clustering algorithm Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]

  • CMRR Improvement of coal mine roof rating classification using fuzzy type-2 [Volume 9, Issue 3, 2018, Pages 691-701]

  • C–North deposit Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]

  • Co Dissolution of Nickel and Cobalt from Iron-Rich Laterite Ores Using Different Organic Acids [Volume 11, Issue 3, 2020, Pages 779-797]

  • CO2 sequestration Wellbore associated problems due to gas injection into non-horizontal structures [Volume 3, Issue 2, 2012, Pages 113-119]

  • Coal Impacts of coal shrinkage, permeability and petrography on gas regime in mines Case study: Tahmoor coal mine, NSW, Australia [Volume 1, Number 1, 2010]

  • Coal Effect of air column in transport canisters on measured gas contents of coal [Volume 8, Issue 1, 2017, Pages 1-9]

  • Coal Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]

  • Coal Distribution of trace elements in coal and coal fly ash and their recovery with mineral processing practices: A review [Volume 9, Issue 3, 2018, Pages 641-655]

  • Coal A review of simultaneous ultrasound-assisted coal flotation [Volume 9, Issue 3, 2018, Pages 679-689]

  • Coal Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]

  • Coal Comparing ordinary kriging and advanced inverse distance squared methods based on estimating coal deposits; case study: East-Parvadeh deposit, central Iran [Volume 9, Issue 3, 2018, Pages 753-760]

  • Coal A programming method to estimate proximate parameters of coal beds from well-logging data using a sequential solving of linear equation systems [Volume 10, Issue 3, 2019, Pages 633-647]

  • Coalbed Methane (CBM) Evaluation of coalbed methane potential in Parvadeh IV coal deposit in central Iran using a combination of MARS modeling and Kriging [Volume 8, Issue 2, 2017, Pages 305-319]

  • Coal Bed Methane (CBM) Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]

  • Coal field Application of Schmidt rebound number for estimating rock strength under specific geological conditions [Volume 1, Number 2, 2010]

  • Coal Flotation An investigation of the particle size effect on coal flotation kinetics using multivariable regression [Volume 1, Number 1, 2010]

  • Coal Flotation Effects of operating parameters on time-dependent ash entrainment behaviour of a sample coal flotation [Volume 8, Issue 3, 2017, Pages 337-357]

  • Coal Intrinsic Characteristics Studying Relationship between Coal Intrinsic Characteristics in Spontaneous Combustion of Coal Potential Using Crossing Point Temperature Test Method [Volume 11, Issue 1, 2020, Pages 315-333]

  • Coal mine Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]

  • Coal Mine Design Fundamentals of 3D modelling and resource estimation in coal mining [Volume 9, Issue 3, 2018, Pages 623-639]

  • Coal Mines Improvement of coal mine roof rating classification using fuzzy type-2 [Volume 9, Issue 3, 2018, Pages 691-701]

  • Coal Mines DPM flow pattern of LHD in underground mines with different ventilation conditions [Volume 10, Issue 2, 2019, Pages 315-326]

  • Coal mining A three dimensional geometrical model for calculation of induced stresses surrounding longwall working [Volume 9, Issue 3, 2018, Pages 727-740]

  • Coal Seam Modelling Fundamentals of 3D modelling and resource estimation in coal mining [Volume 9, Issue 3, 2018, Pages 623-639]

  • Coal tailings Processing of Alborz Markazi coal tailings using column flotation [Volume 2, Issue 1, 2011]

  • Coal Washing Plant Using Trifolium Alexanderium for Phytoremediation of some heavy metals in tailings dam in Anjir-Tange coal washing plant, Mazandaran, Iran [Volume 6, Issue 2, 2015, Pages 141-150]

  • Coal waste Probabilistic prediction of acid mine drainage generation risk based on pyrite oxidation process in coal washery rejects - A Case Study [(Articles in Press)]

  • Cohesion Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]

  • Coke Making Ranking and comparing of traditional and industrial coke making by TOPSIS technique in Shahrood Simin Coke Company [Volume 7, Issue 2, 2016, Pages 165-173]

  • Coking Coal Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]

  • Colloidal Aphrons (CAs) An applied comparison between conventional pre-dispersed solvent extraction (PDSE) contactors and new dissolved nitrogen PDSE (DNPDSE) ones [Volume 6, Issue 2, 2015, Pages 159-168]

  • Combustible Material Recovery Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]

  • Commodity Price Uncertainty Commodity price uncertainty propagation in open-pit mine production planning by Latin hypercube sampling method [Volume 7, Issue 2, 2016, Pages 215-227]

  • Complexity Bayesian Data Fusion: a Reliable Approach for Descriptive Modeling of Ore Deposits [Volume 11, Issue 1, 2020, Pages 63-76]

  • Compositional Data Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]

  • Compound Roof Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]

  • Compression Ratio Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]

  • Computational Fluid dynamics Airflow inside tunnel boring machine: A numerical study and an experimental verification [Volume 10, Issue 3, 2019, Pages 623-632]

  • Concentration-Area Fractal Model Determination of geochemical anomalies and gold mineralized stages based on litho-geochemical data for Zarshuran Carlin-like gold deposit (NW Iran) utilizing multi-fractal modeling and stepwise factor analysis [Volume 8, Issue 4, 2017, Pages 593-610]

  • Concentration-Number (C-N) fractal model Identification of Geochemical Anomalies Using Fractal and LOLIMOT Neuro-Fuzzy modeling in Mial Area, Central Iran [Volume 11, Issue 1, 2020, Pages 99-117]

  • Concentration-Volume Application of fractal modeling to delineate alteration zones and lithological units in Masjed-Daghi Cu-Au porphyry deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 339-356]

  • Concentration-Volume (C-V) fractal model Detection of Zones Based on Ore and Gangue Using Fractal and Multivariate Analysis in Chah Gaz Iron Ore Deposit, Central Iran [Volume 11, Issue 2, 2020, Pages 453-466]

  • Concentration–Volume (C–V) Fractal Model Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]

  • Concentration- Volume Fractal Model Delineation of alteration zones based on artificial neural networks and concentration-volume fractal methods in the hypogene zone of porphyry copper-gold deposit, Masjed-Daghi, East Azerbaijan Province, Iran [Volume 10, Issue 4, 2019, Pages 883-901]

  • Concrete Confinement Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]

  • Conditional probability A GIS-based weights-of-evidence model for mineral potential mapping of hydrothermal gold deposits in Torbat-e-Heydarieh area [Volume 5, Issue 2, 2014, Pages 79-89]

  • Confining pressure Effects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone) [Volume 9, Issue 2, 2018, Pages 379-391]

  • Confining Stress Numerical assessment of influence of confining stress on Kaiser effect using distinct element method [Volume 8, Issue 2, 2017, Pages 215-226]

  • Consumption Estimating the function of copper consumption in Iran between 1991- 2011 using Johansen model [Volume 6, Issue 2, 2015, Pages 183-189]

  • Contaminated Soils Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]

  • Contamination index Identification of groundwater contamination sources of Lakan lead and zinc mine, Khomain, Iran [Volume 3, Issue 2, 2012, Pages 121-134]

  • Contamination indices Assessment of Heavy Metal Contamination in Waters due to Mineral Salts Company from Mighan playa/lake, Arak, Iran [Volume 11, Issue 1, 2020, Pages 171-184]

  • Continuous Data A new chart-independent method for fast identification of control level of industrial processes using continuous data [Volume 8, Issue 2, 2017, Pages 203-213]

  • Continuous Flow Configuration Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]

  • Continuous weighting Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]

  • Control Chart A new chart-independent method for fast identification of control level of industrial processes using continuous data [Volume 8, Issue 2, 2017, Pages 203-213]

  • Convergence Confinement Method Study of convergence confinement method curves considering pore-pressure effect [Volume 10, Issue 2, 2019, Pages 479-492]

  • Convergence-Confinement Method (CCM) Analytical analysis of ultimate ground pressure on tunnel support system [Volume 6, Issue 2, 2015, Pages 151-157]

  • Copper Estimating the function of copper consumption in Iran between 1991- 2011 using Johansen model [Volume 6, Issue 2, 2015, Pages 183-189]

  • Copper Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching [Volume 8, Issue 4, 2017, Pages 523-537]

  • Copper Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]

  • Copper Copper Price Prediction using Wave Count with Contribution of Elliott Waves [Volume 11, Issue 3, 2020, Pages 825-835]

  • Copper extraction Solvent extraction of copper from an industrial sulfate liquor using Chemorex CP-150 [Volume 9, Issue 4, 2018, Pages 905-916]

  • Copper metallurgical factories Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review [Volume 11, Issue 2, 2020, Pages 517-537]

  • Copper price Forecasting copper price using gene expression programming [Volume 9, Issue 2, 2018, Pages 349-360]

  • Copper recovery Copper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study [Volume 10, Issue 4, 2019, Pages 1013-1029]

  • Copper Slags Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district [Volume 6, Issue 2, 2015, Pages 237-249]

  • Correlation Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]

  • CP-150 Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]

  • C++ programming Application of spectrum-volume fractal modeling for detection of mineralized zones [Volume 9, Issue 2, 2018, Pages 371-378]

  • CPU Time A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]

  • Crack Coalescence A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [Volume 6, Issue 1, 2015, Pages 73-93]

  • Cracked Brazilian Disc (CBD) Extended finite element simulation of crack propagation in cracked Brazilian disc [Volume 6, Issue 1, 2015, Pages 95-102]

  • Crack Extension Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]

  • Crack interference Numerical investigation of effect of crack geometrical parameters on hydraulic fracturing process of hydrocarbon reservoirs [Volume 7, Issue 2, 2016, Pages 205-214]

  • Crack Propagation Numerical investigation of effect of crack geometrical parameters on hydraulic fracturing process of hydrocarbon reservoirs [Volume 7, Issue 2, 2016, Pages 205-214]

  • Crack Propagation Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]

  • Cramer-Von-Mises Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]

  • CRBM Application of continuous restricted Boltzmann machine to detect multivariate anomalies from stream sediment geochemical data, Korit, East of Iran [Volume 8, Issue 4, 2017, Pages 673-682]

  • Creep Coefficients Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]

  • Creep Test Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]

  • Critical Strain Analytical analysis of ultimate ground pressure on tunnel support system [Volume 6, Issue 2, 2015, Pages 151-157]

  • Crossing Point Temperature Test Method Studying Relationship between Coal Intrinsic Characteristics in Spontaneous Combustion of Coal Potential Using Crossing Point Temperature Test Method [Volume 11, Issue 1, 2020, Pages 315-333]

  • CRS Processing a multifold ground penetration radar data using common-diffraction-surface stack method [Volume 10, Issue 3, 2019, Pages 777-785]

  • Cuckoo Optimization Determination of constant coefficients of Bourgoyne and Young drilling rate model using a novel evolutionary algorithm [Volume 8, Issue 4, 2017, Pages 693-702]

  • Cuckoo search Integrating Geophysical Attributes with New Cuckoo Search Machine-Learning Algorithm to Estimate Silver Grade Values–Case Study: Zarshouran Gold Mine [Volume 11, Issue 3, 2020, Pages 865-879]

  • Cultivated hyperaccumulators Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review [Volume 11, Issue 2, 2020, Pages 517-537]

  • Cultural Algorithm (CA) Predicting tensile strength of rocks from physical properties based on support vector regression optimized by cultural algorithm [Volume 8, Issue 3, 2017, Pages 467-474]

  • Cu Mineralization A comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran [Volume 9, Issue 4, 2018, Pages 917-940]

  • Cu Mineralization Identification of geochemical anomalies associated with Cu mineralization by applying spectrum-area multi-fractal and wavelet neural network methods in Shahr-e-Babak mining area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 49-73]

  • Cu mineralized zones Application of spectrum-volume fractal modeling for detection of mineralized zones [Volume 9, Issue 2, 2018, Pages 371-378]

  • Cut-and-Fill Method A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]

  • Cut-off Grade The effect of price changes on optimum cut-off grade of different open-pit mines [Volume 3, Issue 1, 2012, Pages 61-68]

  • Cut-off Grade Comparison of golden section search method and imperialist competitive algorithm for optimization cut-off grade- case study: Mine No. 1 of Golgohar [Volume 6, Issue 1, 2015, Pages 63-71]

  • Cut-off grade-price relationship The effect of price changes on optimum cut-off grade of different open-pit mines [Volume 3, Issue 1, 2012, Pages 61-68]

  • Cut Point A parametric model for predicting cut point of hydraulic classifiers [Volume 5, Issue 1, 2014, Pages 47-54]

  • Cut Point Use of density tracers in evaluating performance of Tri-Flo circuits Case study: Tabas (Iran) coal preparation plant [Volume 10, Issue 2, 2019, Pages 441-450]

  • Cut set Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]

  • Cutting force A Numerical Investigation for TBM Disc Cutter Life Prediction in Hard Rocks [(Articles in Press)]

  • Cutting Rate Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]

  • Cutting Rate A Modified Schimazek’s F-abrasiveness Factor for Evaluating Abrasiveness of Andesite Rocks in Rock Sawing Process [Volume 11, Issue 2, 2020, Pages 563-575]

  • Cyanex272 Investigation of performances of solvents D2EHPA, Cyanex272, and their mixture system in separation of some rare earth elements from a Nitric Acid solution [Volume 7, Issue 2, 2016, Pages 143-148]

  • Cyanidation Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill [Volume 5, Issue 2, 2014, Pages 121-128]

  • Cyanide Consumption Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]

D

  • D2EHPA Investigation of performances of solvents D2EHPA, Cyanex272, and their mixture system in separation of some rare earth elements from a Nitric Acid solution [Volume 7, Issue 2, 2016, Pages 143-148]

  • D2EHPA Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]

  • Damage profile Physical modelling of caving propagation process and damage profile ahead of the cave-back [(Articles in Press)]

  • Damage zone Study of Damaged Zone around Circular Opening Using Acoustic Emission Technique [Volume 11, Issue 2, 2020, Pages 433-451]

  • Data Assimilation Bayesian Data Fusion: a Reliable Approach for Descriptive Modeling of Ore Deposits [Volume 11, Issue 1, 2020, Pages 63-76]

  • Data Fusion Fractal-wavelet-fusion-based re-ranking of joint roughness coefficients [Volume 10, Issue 4, 2019, Pages 1121-1133]

  • Data-Space Inversion 3D gravity data-space inversion with sparseness and bound constraints [Volume 8, Issue 2, 2017, Pages 227-235]

  • Decision factors Selection of the best strategy for Iran's quarries: SWOT-FAHP method [Volume 3, Issue 1, 2012, Pages 1-13]

  • Decision Making Ranking and comparing of traditional and industrial coke making by TOPSIS technique in Shahrood Simin Coke Company [Volume 7, Issue 2, 2016, Pages 165-173]

  • Decision Making Bayesian Data Fusion: a Reliable Approach for Descriptive Modeling of Ore Deposits [Volume 11, Issue 1, 2020, Pages 63-76]

  • Decision-Making Fuzzy tonnage-average grade model based on extension principle [Volume 10, Issue 3, 2019, Pages 659-666]

  • Decision-Making Fractal-wavelet-fusion-based re-ranking of joint roughness coefficients [Volume 10, Issue 4, 2019, Pages 1121-1133]

  • Decision-Making Method Evaluation of Mine Reclamation Criteria Using Delphi-Fuzzy Approach [(Articles in Press)]

  • Decision-Making Trial and Evaluation Laboratory (DEMATEL) Technique Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]

  • Decomposition Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]

  • Decorrelation A new method to consider spatial risk assessment of cross-correlated heavy metals using geo-statistical simulation [Volume 8, Issue 3, 2017, Pages 373-391]

  • Deformation modulus Estimating the deformation modulus of jointed rock mass under multilateral loading condition using analytical methods [Volume 2, Issue 2, 2011, Pages 146-156]

  • Delphi-Fuzzy Method Evaluation of Mine Reclamation Criteria Using Delphi-Fuzzy Approach [(Articles in Press)]

  • DEM Combined DEM and SPH simulation of ball milling [Volume 10, Issue 1, 2019, Pages 151-161]

  • DEM model calibration Back-calculation of mechanical parameters of shell and balls materials from discrete element method simulations [Volume 3, Issue 1, 2012, Pages 33-40]

  • DEM simulation An Investigation on Effect of Shell Liner Type on Performance of Industrial SAG Mills Using DEM [Volume 11, Issue 2, 2020, Pages 387-404]

  • DEM simulation Investigation of Effect of Number of Lifters on Performance of Pilot-Scale SAG Mills Using Discrete Element Method [Volume 11, Issue 3, 2020, Pages 675-693]

  • DEM simulation validation Back-calculation of mechanical parameters of shell and balls materials from discrete element method simulations [Volume 3, Issue 1, 2012, Pages 33-40]

  • DEM-SPH Coupling Combined DEM and SPH simulation of ball milling [Volume 10, Issue 1, 2019, Pages 151-161]

  • Density Tracer Use of density tracers in evaluating performance of Tri-Flo circuits Case study: Tabas (Iran) coal preparation plant [Volume 10, Issue 2, 2019, Pages 441-450]

  • Descriptive Analytical Survey Negative impacts of mine exploitations on rural regions of Tekab Township [Volume 7, Issue 1, 2016, Pages 57-66]

  • Design Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel) [Volume 8, Issue 1, 2017, Pages 111-130]

  • Design of experiment Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]

  • Desilication Investigation of parameters affecting desilication of diasporic bauxite in Jajarm mine by thermo-chemical treatment [Volume 8, Issue 1, 2017, Pages 75-81]

  • Desulfurization Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]

  • Development Heading Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]

  • DFT An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]

  • Diamond Wire Saw Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]

  • Diatomite Comparative and Competitive Study of LDH/Diatomite and Chitosan/Diatomite for Adsorptive Removal of Chloride Ion from Aqueous Solution [Volume 11, Issue 1, 2020, Pages 261-279]

  • Diesel-Operated LHD DPM flow pattern of LHD in underground mines with different ventilation conditions [Volume 10, Issue 2, 2019, Pages 315-326]

  • Digestion efficiency Modelling and optimization of digestion efficiency of bauxite in Bayer process: Iran Alumina company [Volume 10, Issue 3, 2019, Pages 799-809]

  • DIGHEM Inverse modeling of HEM data using a new inversion algorithm [Volume 1, Number 2, 2010]

  • Digital Image Analysis Rock mass structural data analysis using image processing techniques (Case study: Choghart iron ore mine northern slopes) [Volume 8, Issue 1, 2017, Pages 61-74]

  • Digital Photogrammetry A field investigation of application of digital terrestrial photogrammetry to characterize geometric properties of discontinuities in open-pit slopes [Volume 8, Issue 3, 2017, Pages 455-465]

  • Dilatancy Envelope Feasibility study of underground salt caverns in Western Newfoundland: experimental and finite element investigation of creep-induced damage [Volume 6, Issue 2, 2015, Pages 205-224]

  • Dilution risk Dilution risk ranking in underground metal mines using Multi-Attributive Approximation area Comparison (MABAC) [(Articles in Press)]

  • Dimension Fractal-wavelet-fusion-based re-ranking of joint roughness coefficients [Volume 10, Issue 4, 2019, Pages 1121-1133]

  • Dimensional Analysis Dimensionality analysis of subsurface structures in magnetotellurics using different methods (a case study: oil field in Southwest of Iran) [Volume 7, Issue 1, 2016, Pages 119-126]

  • Dimensional Analysis Estimation of penetration rate of tunnel boring machines using Monte-Carlo simulation method [Volume 7, Issue 2, 2016, Pages 175-184]

  • Dimensional Features Geostatistical simulation of dyke systems in Sungun porphyry copper deposit, Iran [Volume 6, Issue 1, 2015, Pages 1-10]

  • Dimensional Stone Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]

  • Dimension Stone Ranking sawability of dimension stone using PROMETHEE method [Volume 6, Issue 2, 2015, Pages 263-271]

  • Dimension Stone Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]

  • Dip Fault orientation modeling of Sonda- Jherruck coalfield, Pakistan [Volume 10, Issue 2, 2019, Pages 305-313]

  • Dip Direction Fault orientation modeling of Sonda- Jherruck coalfield, Pakistan [Volume 10, Issue 2, 2019, Pages 305-313]

  • Dipole-dipole array Karstic water exploration using the Schlumberger VES and dipole–dipole resistivity profiling surveys in the Tepal area, west of Shahrood, Iran [Volume 5, Issue 1, 2014, Pages 1-12]

  • Directional Features Geostatistical simulation of dyke systems in Sungun porphyry copper deposit, Iran [Volume 6, Issue 1, 2015, Pages 1-10]

  • Direct Sequential Simulation A new stochastic 3D seismic inversion using direct sequential simulation and co-simulation in a genetic algorithm framework [Volume 8, Issue 3, 2017, Pages 321-335]

  • Disc cutter wear A Numerical Investigation for TBM Disc Cutter Life Prediction in Hard Rocks [(Articles in Press)]

  • Discontinuity Prediction of the deformation modulus of rock masses using Artificial Neural Networks and Regression methods [Volume 4, Issue 1, 2013, Pages 35-43]

  • Discontinuity Numerical analysis of energy transmission through discontinuities and fillings in Kangir Dam [Volume 7, Issue 2, 2016, Pages 251-259]

  • Discontinuity Sensitivity analysis of stress and cracking in rock mass blasting using numerical modelling [(Articles in Press)]

  • Discrete Element Method Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]

  • Discrete Fracture Network Stability analysis of support systems using a coupled FEM-DFN model (Case study: a diversion tunnel at Lorestan dam site, Iran) [Volume 9, Issue 2, 2018, Pages 485-497]

  • Discrete Fracture Network Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]

  • Dispatch A Mathematical Model to Optimize Allocation Sequence in Dispatching Problem [Volume 11, Issue 1, 2020, Pages 185-192]

  • Dispersed Mineralization Zones Prediction of dispersed mineralization zone in depth using frequency domain of surface geochemical data [Volume 8, Issue 3, 2017, Pages 433-446]

  • Displacement Calculation of tunnel behavior in viscoelastic rock mass [Volume 4, Issue 1, 2013, Pages 27-33]

  • Displacement Discontinuity Method (DDM) A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [Volume 6, Issue 1, 2015, Pages 73-93]

  • Dissolution Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]

  • Dissolved Nitrogen Pre-Dispersed Solvent Extraction (DNPDSE) Contractor An applied comparison between conventional pre-dispersed solvent extraction (PDSE) contactors and new dissolved nitrogen PDSE (DNPDSE) ones [Volume 6, Issue 2, 2015, Pages 159-168]

  • Distinct Element Method Numerical Modeling of Rock Slopes with a Potential of Block-Flexural Toppling Failure [Volume 11, Issue 1, 2020, Pages 247-259]

  • Distinct Element Method Sensitivity analysis of stress and cracking in rock mass blasting using numerical modelling [(Articles in Press)]

  • D-optimal experimental design Copper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study [Volume 10, Issue 4, 2019, Pages 1013-1029]

  • Dowex 21K Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]

  • Downtime Introducing hard rock TBMs’ downtime analysis model with reference to past case histories’ data [Volume 9, Issue 2, 2018, Pages 457-472]

  • DPM DPM flow pattern of LHD in underground mines with different ventilation conditions [Volume 10, Issue 2, 2019, Pages 315-326]

  • Drillability A laboratory study of rock properties affecting the penetration rate of pneumatic top hammer drills [Volume 5, Issue 1, 2014, Pages 25-34]

  • Drilling 3D model construction of induced polarization and resistivity data with quantifying uncertainties using geostatistical methods and drilling (Case study: Madan Bozorg, Iran) [Volume 9, Issue 4, 2018, Pages 857-872]

  • Drilling Operation Development of a mechanical earth model in an Iranian off-shore gas field [Volume 7, Issue 1, 2016, Pages 37-46]

  • Drilling Parameters Determination of constant coefficients of Bourgoyne and Young drilling rate model using a novel evolutionary algorithm [Volume 8, Issue 4, 2017, Pages 693-702]

  • Drilling Rate Estimation Determination of constant coefficients of Bourgoyne and Young drilling rate model using a novel evolutionary algorithm [Volume 8, Issue 4, 2017, Pages 693-702]

  • Drilling Simulator Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]

  • Drilling Specific Energy Studying empirical correlation between drilling specific energy and geo-mechanical parameters in an oil field in SW Iran [Volume 8, Issue 3, 2017, Pages 393-401]

  • Drop weight test Development of a New Experimental Technique for Dynamic Fracture Toughness Measurement of Rocks using Drop Weight Test [Volume 11, Issue 3, 2020, Pages 909-920]

  • Dryer Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]

  • Ductile Failure New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]

  • Dust Monitoring and assessment of pollutants resulting from bench-blasting operations [Volume 7, Issue 1, 2016, Pages 109-118]

  • Dyke System Geostatistical simulation of dyke systems in Sungun porphyry copper deposit, Iran [Volume 6, Issue 1, 2015, Pages 1-10]

  • Dynamic allocation A Mathematical Model to Optimize Allocation Sequence in Dispatching Problem [Volume 11, Issue 1, 2020, Pages 185-192]

  • Dynamic fracture toughness Development of a New Experimental Technique for Dynamic Fracture Toughness Measurement of Rocks using Drop Weight Test [Volume 11, Issue 3, 2020, Pages 909-920]

  • Dynamic Fracturing Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]

  • Dynamic Slope Stability A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]

E

  • Earthquake A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]

  • Earthquake-Induced Displacements A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]

  • Eastern Alborz Coal Mines Semi-quantitative environmental impact assessment and sustainability level determination of coal mining using a mathematical model [Volume 7, Issue 2, 2016, Pages 185-193]

  • Eastern Alborz Coal Mines Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]

  • East-Parvadeh Comparing ordinary kriging and advanced inverse distance squared methods based on estimating coal deposits; case study: East-Parvadeh deposit, central Iran [Volume 9, Issue 3, 2018, Pages 753-760]

  • Economic Development Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Economic Geology Bayesian Data Fusion: a Reliable Approach for Descriptive Modeling of Ore Deposits [Volume 11, Issue 1, 2020, Pages 63-76]

  • Edge-preserved Algorithm Enhancing magnetic signals in unexploded ordnances (UXO) detection based on edge-preserved stable downward continuation method [Volume 5, Issue 1, 2014, Pages 13-24]

  • EDS line profile analyses X-Ray mapping and the mineralogy pattern of nickel laterite ore: Bavanat, Fars, Iran [Volume 10, Issue 3, 2019, Pages 811-820]

  • Effect Factor A programming method to estimate proximate parameters of coal beds from well-logging data using a sequential solving of linear equation systems [Volume 10, Issue 3, 2019, Pages 633-647]

  • Elastic Medium On Analytic Solutions of Elastic Net Displacements around a Circular Tunnel [Volume 11, Issue 2, 2020, Pages 419-432]

  • Electrical Chargeability Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]

  • Electrical Chargeability Geostatistical Modeling of Electrical Resistivity Tomography for Imaging Porphyry Cu Mineralization in Takht-e-Gonbad Deposit, Iran [Volume 11, Issue 1, 2020, Pages 143-159]

  • Electrical resistivity Approximate resistivity and susceptibility mapping from airborne electromagnetic and magnetic data, a case study for a geologically plausible porphyry copper unit in Iran [Volume 4, Issue 2, 2013, Pages 133-146]

  • Electrical resistivity Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]

  • Electrical resistivity Geostatistical Modeling of Electrical Resistivity Tomography for Imaging Porphyry Cu Mineralization in Takht-e-Gonbad Deposit, Iran [Volume 11, Issue 1, 2020, Pages 143-159]

  • Electrical Resistivity Tomography (ERT) Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method [Volume 8, Issue 1, 2017, Pages 103-110]

  • Electrocoagulation/Flotation Copper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study [Volume 10, Issue 4, 2019, Pages 1013-1029]

  • Electromagnetic and Magnetic data Approximate resistivity and susceptibility mapping from airborne electromagnetic and magnetic data, a case study for a geologically plausible porphyry copper unit in Iran [Volume 4, Issue 2, 2013, Pages 133-146]

  • Elliott Waves Copper Price Prediction using Wave Count with Contribution of Elliott Waves [Volume 11, Issue 3, 2020, Pages 825-835]

  • Ellipticity Dimensionality analysis of subsurface structures in magnetotellurics using different methods (a case study: oil field in Southwest of Iran) [Volume 7, Issue 1, 2016, Pages 119-126]

  • Emissions Pollution problems in the metallurgical industry: A review [Volume 2, Issue 1, 2011, Pages 17-26]

  • Emissions Optimal Earthmoving Fleet Size for Minimising Emissions and Cost [(Articles in Press)]

  • Empirical criteria New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]

  • Empirical Equations Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]

  • Empirical Methods Numerical modelling of the underground roadways in coal mines– uncertainties caused by use of empirical-based downgrading methods and in situ stresses [Volume 9, Issue 3, 2018, Pages 593-604]

  • Encapsulating Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects [Volume 11, Issue 2, 2020, Pages 577-586]

  • Encome Modelvision Underground contour (UGC) mapping using potential field, well log and comparing with seismic interpretation in Lavarestan area [Volume 6, Issue 1, 2015, Pages 55-62]

  • Energy Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills [Volume 2, Issue 1, 2011]

  • Energy Efficiency A developed approach based on grinding time to determine ore comminution properties [Volume 4, Issue 2, 2013, Pages 105-112]

  • Energy Methods Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]

  • Enrichment Factor Geochemical and environmental assessment of heavy metals in soils and sediments of Forumad Chromite mine, NE of Iran [Volume 6, Issue 2, 2015, Pages 251-261]

  • Enrichment Factor Evaluation of stream sediment contamination by potentially toxic elements around mining and farming areas (SE Nigeria) [Volume 10, Issue 4, 2019, Pages 833-851]

  • Entrainment Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]

  • Entrainment Factor Effects of operating parameters on time-dependent ash entrainment behaviour of a sample coal flotation [Volume 8, Issue 3, 2017, Pages 337-357]

  • Environment Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]

  • Environment Evaluation of background geochemical speciation of heavy metals in overburden topsoil of bituminous sand deposit area, Ondo state, Nigeria [Volume 10, Issue 4, 2019, Pages 869-882]

  • Environment A Safe and Sustainable Development in a Hygiene and Healthy Company Using Decision Matrix Risk Assessment Technique: a case study [Volume 11, Issue 2, 2020, Pages 363-373]

  • Environmental and Social Impact Assessment Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Environmental Assessment Geochemical and environmental assessment of heavy metals in soils and sediments of Forumad Chromite mine, NE of Iran [Volume 6, Issue 2, 2015, Pages 251-261]

  • Environmental Conditions (Covariates) Maintainability measure based on operating environment, a case study: Sungun copper mine [Volume 8, Issue 3, 2017, Pages 511-521]

  • Environmental Impact Assessment Environmental Impact Assessment of Coal Washing Plant (Alborz- Sharghi –Iran) [Volume 3, Issue 2, 2012, Pages 69-77]

  • Environmental Impact Assessment (EIA) Semi-quantitative environmental impact assessment and sustainability level determination of coal mining using a mathematical model [Volume 7, Issue 2, 2016, Pages 185-193]

  • Environmental Pollution Estimation of Cadmium and Uranium in a stream sediment from Eshtehard region in Iran using an Artificial Neural Network [Volume 7, Issue 1, 2016, Pages 97-107]

  • Environmental stresses Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review [Volume 11, Issue 2, 2020, Pages 517-537]

  • EPB-TBM Numerical Modelling of Backfill Grouting Approaches in EPB Tunneling [Volume 11, Issue 1, 2020, Pages 301-314]

  • Equivalent Shape Factor A New Approach for Obtaining Settling Velocity in a Thickener Using Statistical Regression: A Case Study [Volume 7, Issue 1, 2016, Pages 47-56]

  • Esfordi Phosphate Concentrate Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]

  • Estimation Precision Improvement Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]

  • Evacuation Capability Method of Grading Subway Stations Based on Evacuation Capability: A Quantitative Method [Volume 11, Issue 2, 2020, Pages 587-609]

  • Excavation A state-of-the-art review of mechanical rock excavation technologies [Volume 1, Number 1, 2010]

  • Excavation Damaged Zone (EDZ) Extension of Excavation Damaged Zone Due to Longwall Working Effect [Volume 7, Issue 1, 2016, Pages 13-24]

  • Excavation machine The use of analytic hierarchy process in the selection of suitable excavation machine for Dez - Qomroud water conveyance tunnel (lot 1&2), Iran [Volume 2, Issue 1, 2011]

  • Experimental Model Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]

  • Experimental Study An experimental study of axial load transfer mechanisms of cable bolts using axially split embedment apparatus [Volume 8, Issue 2, 2017, Pages 131-137]

  • Exploration Targets Selection of new exploration targets using lithogeochemical data obtained for Taknar deposit located in NE of Iran [Volume 6, Issue 1, 2015, Pages 11-20]

  • Extended Finite Element Method Numerical modeling of hydraulic fracturing in carbonate rocks of Bangestan reservoir [Volume 9, Issue 1, 2018, Pages 117-126]

  • Extended Finite Element Method Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]

  • Extended Finite Element Method (X-FEM) Extended finite element simulation of crack propagation in cracked Brazilian disc [Volume 6, Issue 1, 2015, Pages 95-102]

  • Extraction Equipment Determination of a suitable extraction equipment in mechanized longwall mining in steeply inclined coal seams using fuzzy analytical hierarchy method (Case study: Hamkar coal mine, Iran) [Volume 8, Issue 3, 2017, Pages 487-499]

F

  • Face Fundamental understanding of goaf gas displacement in longwall goaf [Volume 6, Issue 2, 2015, Pages 191-203]

  • Factor analysis Detection of Zones Based on Ore and Gangue Using Fractal and Multivariate Analysis in Chah Gaz Iron Ore Deposit, Central Iran [Volume 11, Issue 2, 2020, Pages 453-466]

  • Factor of Safety Prediction of slope stability using adaptive neuro-fuzzy inference system based on clustering methods [Volume 8, Issue 2, 2017, Pages 163-177]

  • Factor Ratio A new chart-independent method for fast identification of control level of industrial processes using continuous data [Volume 8, Issue 2, 2017, Pages 203-213]

  • Failure Reliability-based maintenance scheduling of powered supports in Tabas mechanized coal mine [Volume 5, Issue 2, 2014, Pages 113-120]

  • Failure Modes A new approach for assessing stability of rock slopes considering centroids of weak zones [Volume 9, Issue 1, 2018, Pages 1-18]

  • Falling Location Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]

  • Fault Orientation Fault orientation modeling of Sonda- Jherruck coalfield, Pakistan [Volume 10, Issue 2, 2019, Pages 305-313]

  • Fault-Related Fractures 3D stochastic rock fracture modeling related to strike-slip faults [Volume 6, Issue 2, 2015, Pages 169-181]

  • FCMRR Improvement of coal mine roof rating classification using fuzzy type-2 [Volume 9, Issue 3, 2018, Pages 691-701]

  • Features Number Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]

  • Feed Chute Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]

  • Feed Forward Neural Network Application of Artificial Neural Networks and Support Vector Machines for carbonate pores size estimation from 3D seismic data [Volume 4, Issue 1, 2013, Pages 1-14]

  • FEM Feasibility study of underground salt caverns in Western Newfoundland: experimental and finite element investigation of creep-induced damage [Volume 6, Issue 2, 2015, Pages 205-224]

  • Ferrous and nonferrous industries Pollution problems in the metallurgical industry: A review [Volume 2, Issue 1, 2011, Pages 17-26]

  • Feyz-Abad Comparison of various knowledge-driven and logistic-based mineral prospectivity methods to generate Cu and Au exploration targets Case study: Feyz-Abad area (North of Lut block, NE Iran) [Volume 8, Issue 4, 2017, Pages 611-629]

  • FFTA Risk assessment of flyrock in surface mines using FFTA-MCDMs combination [(Articles in Press)]

  • Filling Numerical analysis of energy transmission through discontinuities and fillings in Kangir Dam [Volume 7, Issue 2, 2016, Pages 251-259]

  • Filter-Based Algorithms A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]

  • FILTERSIM Algorithm A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]

  • Finite Difference Method A boundary element/finite difference analysis of subsidence phenomenon due to underground structures [Volume 8, Issue 2, 2017, Pages 237-253]

  • Finite Difference Method Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]

  • Finite element The impact of poor cementing casing damage: A numerical simulation study [Volume 6, Issue 1, 2015, Pages 41-53]

  • Finite Element Method Stability analysis of support systems using a coupled FEM-DFN model (Case study: a diversion tunnel at Lorestan dam site, Iran) [Volume 9, Issue 2, 2018, Pages 485-497]

  • Finite Element Method A finite element model to simulate magnetic field distribution and laboratory studies in wet low-intensity magnetic separator [Volume 10, Issue 3, 2019, Pages 717-727]

  • Finite Element Method A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]

  • Finite Element Method Numerical analysis of slide-head-toppling failure [Volume 10, Issue 4, 2019, Pages 1001-1011]

  • Finite Element Model An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]

  • Finite Element Modeling Stability Analysis of Salt Cavern Gas Storage Using 2D Thermo-Hydro-Mechanical Finite-Element Software [Volume 11, Issue 1, 2020, Pages 77-97]

  • Flac3D Numerical Modelling of Backfill Grouting Approaches in EPB Tunneling [Volume 11, Issue 1, 2020, Pages 301-314]

  • Flac3D A 3D Finite-Difference Analysis of Interaction between a Newly-Driven Large Tunnel with Twin Tunnels in Urban Areas [Volume 11, Issue 3, 2020, Pages 809-823]

  • Fleet size Optimal Earthmoving Fleet Size for Minimising Emissions and Cost [(Articles in Press)]

  • Floating cone method A new algorithm for optimum open pit design: Floating cone method III [Volume 2, Issue 2, 2011, Pages 118-125]

  • Floating cone method II A new algorithm for optimum open pit design: Floating cone method III [Volume 2, Issue 2, 2011, Pages 118-125]

  • Floating cone method III A new algorithm for optimum open pit design: Floating cone method III [Volume 2, Issue 2, 2011, Pages 118-125]

  • Flotaion reagents Implementation of flotation and gravity separation, to process Changarzeh sulfide-oxide lead ore [Volume 3, Issue 2, 2012, Pages 79-87]

  • Flotation Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district [Volume 6, Issue 2, 2015, Pages 237-249]

  • Flotation Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]

  • Flotation A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]

  • Flotation A review of simultaneous ultrasound-assisted coal flotation [Volume 9, Issue 3, 2018, Pages 679-689]

  • Flotation Evaluation of effects of operating parameters on combustible material recovery in coking coal flotation process using artificial neural networks [Volume 10, Issue 2, 2019, Pages 429-440]

  • Flotation Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]

  • Flotation Comparison between Helical and Elliptical Static Mixers Performance in Column Flotation of Sungun Copper Plant [Volume 11, Issue 1, 2020, Pages 221-230]

  • Flotation Circuit Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade [Volume 8, Issue 4, 2017, Pages 539-544]

  • Flotation Circuit Modification Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade [Volume 8, Issue 4, 2017, Pages 539-544]

  • Flotation kinetics An investigation of the particle size effect on coal flotation kinetics using multivariable regression [Volume 1, Number 1, 2010]

  • Flow Sheet Mineralogical and physical beneficiation studies for iron extraction from Bardaskan titanomagnetite placer deposit [Volume 8, Issue 2, 2017, Pages 191-201]

  • Fluorapatite Concentration and recycling of rare earth elements (REEs) from iron mine waste using a combination of physical separation methods [Volume 7, Issue 2, 2016, Pages 195-203]

  • Fly Ash Distribution of trace elements in coal and coal fly ash and their recovery with mineral processing practices: A review [Volume 9, Issue 3, 2018, Pages 641-655]

  • Fly Ash Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash [Volume 9, Issue 2, 2018, Pages 319-330]

  • Flyrock Risk assessment of flyrock in surface mines using FFTA-MCDMs combination [(Articles in Press)]

  • Forecasting Forecasting copper price using gene expression programming [Volume 9, Issue 2, 2018, Pages 349-360]

  • Formation interface Formation interface detection using Gamma Ray log: A novel approach [Volume 3, Issue 1, 2012, Pages 41-50]

  • Forward Selection Estimation of Cadmium and Uranium in a stream sediment from Eshtehard region in Iran using an Artificial Neural Network [Volume 7, Issue 1, 2016, Pages 97-107]

  • Fourier Transform Enhancing magnetic signals in unexploded ordnances (UXO) detection based on edge-preserved stable downward continuation method [Volume 5, Issue 1, 2014, Pages 13-24]

  • Fourier Transformation Prediction of dispersed mineralization zone in depth using frequency domain of surface geochemical data [Volume 8, Issue 3, 2017, Pages 433-446]

  • Fractal Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]

  • Fractal Parameter Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]

  • Fractured Reservoir Permeability upscaling in fractured reservoirs using different optimized mother wavelets at each level [Volume 7, Issue 2, 2016, Pages 239-250]

  • Fracture Mechanics Simulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method [Volume 9, Issue 4, 2018, Pages 999-1008]

  • Fracture toughness Effects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone) [Volume 9, Issue 2, 2018, Pages 379-391]

  • Freeze-Thaw Cycle Effect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study) [Volume 10, Issue 1, 2019, Pages 257-270]

  • Freeze-Thaw Cycle Effects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar [Volume 10, Issue 4, 2019, Pages 967-978]

  • Frequency Domain (FD) Prediction of mineral deposit model and identification of mineralization trend in depth using frequency domain of surface geochemical data in Dalli Cu-Au porphyry deposit [Volume 6, Issue 2, 2015, Pages 225-236]

  • Frequency Domain of Geochemical Data Prediction of dispersed mineralization zone in depth using frequency domain of surface geochemical data [Volume 8, Issue 3, 2017, Pages 433-446]

  • Friction Angle Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]

  • Frother type Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]

  • Froth Flotation Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]

  • Froth Flotation Investigation of Mechanism of Adsorption of Xanthate and Hydroxamate on Malachite [Volume 11, Issue 3, 2020, Pages 921-933]

  • FT-IR Spectroscopy Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]

  • Fuzzy AHP Selection of the best strategy for Iran's quarries: SWOT-FAHP method [Volume 3, Issue 1, 2012, Pages 1-13]

  • Fuzzy AHP Selection of chromite processing plant site using fuzzy analytic hierarchy process (FAHP) [Volume 8, Issue 2, 2017, Pages 155-162]

  • Fuzzy Analytical Hierarchy Process Determination of a suitable extraction equipment in mechanized longwall mining in steeply inclined coal seams using fuzzy analytical hierarchy method (Case study: Hamkar coal mine, Iran) [Volume 8, Issue 3, 2017, Pages 487-499]

  • Fuzzy C-means clustering method A New Method for Predicting Indirect Tensile Strength of Sandstone Rock Samples [Volume 11, Issue 3, 2020, Pages 899-908]

  • Fuzzy Delphi AHP A Hybrid Fuzzy MCDM Approach to Determine an Optimal Block Size in Open-Pit Mine Modeling: a Case Study [Volume 11, Issue 2, 2020, Pages 611-627]

  • Fuzzy Inference System Estimation of groundwater inflow situation using fuzzy logic: a case study (Beheshtabad water conveying tunnel, Iran) [Volume 7, Issue 2, 2016, Pages 229-238]

  • Fuzzy Inference System Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]

  • Fuzzy Inference System Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]

  • Fuzzy logic method GIS modelling for Au-Pb-Zn potential mapping in Torud-Chah Shirin area-Iran [Volume 1, Number 1, 2010]

  • Fuzzy MOORA A Hybrid Fuzzy MCDM Approach to Determine an Optimal Block Size in Open-Pit Mine Modeling: a Case Study [Volume 11, Issue 2, 2020, Pages 611-627]

  • Fuzzy Type-2 Improvement of coal mine roof rating classification using fuzzy type-2 [Volume 9, Issue 3, 2018, Pages 691-701]

G

  • Galamsey Operational dynamics of “Galamsey” within eleven selected districts of western region of Ghana [Volume 8, Issue 1, 2017, Pages 11-34]

  • Galena Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]

  • Gallium Gallium extraction from Jajarm Bayer process liquor using micro-emulsions [Volume 8, Issue 2, 2017, Pages 269-276]

  • Game Theory Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]

  • GAMS Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]

  • Gang Saw Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]

  • Gangue Detection of Zones Based on Ore and Gangue Using Fractal and Multivariate Analysis in Chah Gaz Iron Ore Deposit, Central Iran [Volume 11, Issue 2, 2020, Pages 453-466]

  • Gap Statistics Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]

  • Gardner Equation Subsurface modeling of mud volcanoes, using density model and analysis of seismic velocity [Volume 6, Issue 1, 2015, Pages 31-39]

  • Gas Content Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]

  • Gas Contents Effect of air column in transport canisters on measured gas contents of coal [Volume 8, Issue 1, 2017, Pages 1-9]

  • Gasoline Impact of gasoline contamination on mechanical behavior of sandy clay soil [Volume 10, Issue 2, 2019, Pages 389-399]

  • Gauss Newton A new method for 3-D magnetic data inversion with physical bound [Volume 8, Issue 3, 2017, Pages 501-510]

  • Gazestan Deposit Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]

  • Gene Expression Prediction of Blasting Cost in Limestone Mines Using Gene Expression Programming Model and Artificial Neural Networks [Volume 11, Issue 1, 2020, Pages 281-300]

  • Gene expression programming Forecasting copper price using gene expression programming [Volume 9, Issue 2, 2018, Pages 349-360]

  • Gene expression programming Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties [Volume 10, Issue 4, 2019, Pages 917-928]

  • Generalized Effective-Medium Theory of Induced Polarization Using a combination of genetic algorithm and particle swarm optimization algorithm for GEMTIP modeling of spectral-induced polarization data [Volume 10, Issue 2, 2019, Pages 493-505]

  • Generalized Kelvin model Calculation of tunnel behavior in viscoelastic rock mass [Volume 4, Issue 1, 2013, Pages 27-33]

  • Genetic Algorithm Application of artificial neural network and genetic algorithm to modelling the groundwater inflow to an advancing open pit mine [Volume 6, Issue 1, 2015, Pages 21-30]

  • Genetic Algorithm A new stochastic 3D seismic inversion using direct sequential simulation and co-simulation in a genetic algorithm framework [Volume 8, Issue 3, 2017, Pages 321-335]

  • Genetic Algorithm Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm [Volume 8, Issue 2, 2017, Pages 291-304]

  • Genetic Algorithm Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process [Volume 10, Issue 3, 2019, Pages 559-574]

  • Genetic Algorithm Using a combination of genetic algorithm and particle swarm optimization algorithm for GEMTIP modeling of spectral-induced polarization data [Volume 10, Issue 2, 2019, Pages 493-505]

  • Genetic Algorithm Predicting Unconfined Compressive Strength of Intact Rock Using New Hybrid Intelligent Models [Volume 11, Issue 1, 2020, Pages 231-246]

  • Genetic Algorithm A Mathematical Model to Optimize Allocation Sequence in Dispatching Problem [Volume 11, Issue 1, 2020, Pages 185-192]

  • Geoaccumulation index Evaluation of stream sediment contamination by potentially toxic elements around mining and farming areas (SE Nigeria) [Volume 10, Issue 4, 2019, Pages 833-851]

  • Geochemical Geochemical and environmental assessment of heavy metals in soils and sediments of Forumad Chromite mine, NE of Iran [Volume 6, Issue 2, 2015, Pages 251-261]

  • Geochemical Anomaly A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]

  • Geochemical Anomaly Identification of geochemical anomalies associated with Cu mineralization by applying spectrum-area multi-fractal and wavelet neural network methods in Shahr-e-Babak mining area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 49-73]

  • Geochemical Elements Estimation Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]

  • Geochemical Mapping Anomaly delineation of porphyry copper deposits of Hanza Region through geochemical data analyses and multispectral remote sensing [Volume 10, Issue 3, 2019, Pages 747-762]

  • Geochemical Mineralization Prospectivity Index Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]

  • Geochemical modeling Predicting Arsenic Behavior in the Wastewater of Mouteh Gold Plant by Geochemical Modeling [Volume 4, Issue 1, 2013, Pages 57-65]

  • Geochemistry Data Local multivariate outliers as geochemical anomaly halos indicators, a case study: Hamich area, Southern Khorasan, Iran [Volume 8, Issue 2, 2017, Pages 179-189]

  • Geographic Information System Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]

  • Geographic Information System Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]

  • Geographic Information System (GIS) A GIS-based weights-of-evidence model for mineral potential mapping of hydrothermal gold deposits in Torbat-e-Heydarieh area [Volume 5, Issue 2, 2014, Pages 79-89]

  • Geological strength index A Preliminary Assessment of Rock Slope Stability in Tropical Climates: A Case Study at Lafarge Quarry, Perak, Malaysia [Volume 11, Issue 3, 2020, Pages 661-673]

  • Geological Structure Fault orientation modeling of Sonda- Jherruck coalfield, Pakistan [Volume 10, Issue 2, 2019, Pages 305-313]

  • Geological structures Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]

  • Geo-Mechanical Properties Studying empirical correlation between drilling specific energy and geo-mechanical parameters in an oil field in SW Iran [Volume 8, Issue 3, 2017, Pages 393-401]

  • Geomechanics Wellbore associated problems due to gas injection into non-horizontal structures [Volume 3, Issue 2, 2012, Pages 113-119]

  • Geophysical Method Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]

  • Geophysical Model Geostatistical estimation to delineate oxide and sulfide zones using geophysical data; a case study of Chahar Bakhshi vein-type gold deposit, NE Iran [Volume 10, Issue 3, 2019, Pages 679-694]

  • Geospatial Assessment of Terrain and Land Use/Land Cover Change of Mine Sites Using Geospatial Techniques in Plateau State, Nigeria [(Articles in Press)]

  • Geostatistical Simulation Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]

  • Geostatistical Simulation A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]

  • Geostatistical Simulation Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]

  • Geostatistical Simulation Application of Sequential Gaussian Conditional Simulation to Underground Mine Design Under Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 695-709]

  • Geostatistical Simulation Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]

  • Geo-Statistical Simulation A new method to consider spatial risk assessment of cross-correlated heavy metals using geo-statistical simulation [Volume 8, Issue 3, 2017, Pages 373-391]

  • Geostatistics Modelling of the kaolin deposits and reserve classification challenges of Charentes Basin, France [Volume 1, Number 1, 2010]

  • Geostatistics Evaluation of coalbed methane potential in Parvadeh IV coal deposit in central Iran using a combination of MARS modeling and Kriging [Volume 8, Issue 2, 2017, Pages 305-319]

  • Geostatistics A GIS-aided resource estimation of coalfields in Kangal basin, Sivas province, Turkey [Volume 9, Issue 3, 2018, Pages 581-591]

  • Geostatistics Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]

  • Geostatistics 3D model construction of induced polarization and resistivity data with quantifying uncertainties using geostatistical methods and drilling (Case study: Madan Bozorg, Iran) [Volume 9, Issue 4, 2018, Pages 857-872]

  • Geostatistics Fuzzy tonnage-average grade model based on extension principle [Volume 10, Issue 3, 2019, Pages 659-666]

  • Geostatistics Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]

  • Geostatistics Geostatistical Modeling of Electrical Resistivity Tomography for Imaging Porphyry Cu Mineralization in Takht-e-Gonbad Deposit, Iran [Volume 11, Issue 1, 2020, Pages 143-159]

  • Geothermal Field Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]

  • GIS GIS modelling for Au-Pb-Zn potential mapping in Torud-Chah Shirin area-Iran [Volume 1, Number 1, 2010]

  • GIS A GIS-aided resource estimation of coalfields in Kangal basin, Sivas province, Turkey [Volume 9, Issue 3, 2018, Pages 581-591]

  • Goaf Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution [Volume 9, Issue 3, 2018, Pages 547-557]

  • Goal Programming Development of a goal programming model for optimization of truck allocation in open pit mines [Volume 8, Issue 3, 2017, Pages 359-371]

  • Gohar Zamin Iron Ore Mine Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]

  • Gold Prediction of recovery of gold thiosulfate on activated carbon using artificial neural networks [Volume 5, Issue 1, 2014, Pages 55-66]

  • Gold Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill [Volume 5, Issue 2, 2014, Pages 121-128]

  • Gold Gold, Silver and Iron in Iron Oxy-hydroxide Precipitate Formed in Process of Acid Mine Drainage [Volume 11, Issue 2, 2020, Pages 335-346]

  • Gold Deposits Impact of mining on groundwater quality in SW Ashanti, Ghana: a preliminary study [Volume 7, Issue 1, 2016, Pages 81-95]

  • Gold Deposits Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]

  • Golden Section Search (GSS) Method Comparison of golden section search method and imperialist competitive algorithm for optimization cut-off grade- case study: Mine No. 1 of Golgohar [Volume 6, Issue 1, 2015, Pages 63-71]

  • Gold mineralization A GIS-based weights-of-evidence model for mineral potential mapping of hydrothermal gold deposits in Torbat-e-Heydarieh area [Volume 5, Issue 2, 2014, Pages 79-89]

  • Gol-E-Gohar Iron Ore Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]

  • Goodness-of-fit Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]

  • Grade Optimal production strategy of bimetallic deposits under technical and economic uncertainties using stochastic chance-constrained programming [Volume 8, Issue 3, 2017, Pages 475-485]

  • Grain size Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]

  • Gravity Concentration Implementation of flotation and gravity separation, to process Changarzeh sulfide-oxide lead ore [Volume 3, Issue 2, 2012, Pages 79-87]

  • Gravity Data Estimation of 3D density distribution of chromites deposit using gravity data [Volume 4, Issue 2, 2013, Pages 97-104]

  • Gravity Data 3D gravity data-space inversion with sparseness and bound constraints [Volume 8, Issue 2, 2017, Pages 227-235]

  • Gravity Data Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]

  • Gravity Separator Prediction of effect of fine particle removal on efficiency of a spiral circuit by size-by-size partition curves [Volume 8, Issue 4, 2017, Pages 567-571]

  • Gravity thickening A new approach to define batch settling curves for analyzing the sedimentation characteristics [Volume 3, Issue 2, 2012, Pages 103-111]

  • Green Malachite dye An innovative application of (NiXZnX–X Fe2O4) Mineral nanoparticles for adsorption of Malachite green dye from wastewater effluents [Volume 9, Issue 1, 2018, Pages 143-152]

  • Grey A new model for mining method selection based on grey and TODIM methods [Volume 8, Issue 1, 2017, Pages 49-60]

  • Grinding Application of perfect mixing model for simulation of vertical roller mills [Volume 8, Issue 4, 2017, Pages 545-553]

  • Grinding Kinetics Effect of thermal treatment on specific rate of breakage of manganese ore [Volume 9, Issue 2, 2018, Pages 339-348]

  • Grinding Time Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district [Volume 6, Issue 2, 2015, Pages 237-249]

  • GR log Formation interface detection using Gamma Ray log: A novel approach [Volume 3, Issue 1, 2012, Pages 41-50]

  • Ground conditions Evaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2) [Volume 3, Issue 2, 2012, Pages 89-98]

  • Ground Penetrating Radar (GPR) Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]

  • Ground Penetration Radar Processing a multifold ground penetration radar data using common-diffraction-surface stack method [Volume 10, Issue 3, 2019, Pages 777-785]

  • Ground Pressure Analytical analysis of ultimate ground pressure on tunnel support system [Volume 6, Issue 2, 2015, Pages 151-157]

  • Ground Reaction Curve Study of convergence confinement method curves considering pore-pressure effect [Volume 10, Issue 2, 2019, Pages 479-492]

  • Ground Vibration Investigating and Ranking Blasting Patterns to Reduce Ground Vibration using Soft Computing Approaches and MCDM Technique [Volume 11, Issue 3, 2020, Pages 881-897]

  • Groundwater A comparative study of performance of K-nearest neighbors and support vector machines for classification of groundwater [Volume 7, Issue 2, 2016, Pages 149-164]

  • Groundwater Impact of mining on groundwater quality in SW Ashanti, Ghana: a preliminary study [Volume 7, Issue 1, 2016, Pages 81-95]

  • Groundwater Use of artificial intelligence techniques to predict distribution of heavy metals in groundwater of Lakan lead-zinc mine in Iran [Volume 8, Issue 1, 2017, Pages 35-48]

  • Groundwater Conditions Estimation of groundwater inflow situation using fuzzy logic: a case study (Beheshtabad water conveying tunnel, Iran) [Volume 7, Issue 2, 2016, Pages 229-238]

  • Groundwater inflow Application of artificial neural network and genetic algorithm to modelling the groundwater inflow to an advancing open pit mine [Volume 6, Issue 1, 2015, Pages 21-30]

  • Group Method of Data Handling Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]

  • Gustafson-Kessel Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]

H

  • Haft-Savaran Application of alteration index and zoning for Pb-Znexploration in Haft-Savaran area, Khomein, Iran [Volume 9, Issue 1, 2018, Pages 229-242]

  • Hamich Local multivariate outliers as geochemical anomaly halos indicators, a case study: Hamich area, Southern Khorasan, Iran [Volume 8, Issue 2, 2017, Pages 179-189]

  • Hararan District Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]

  • Harmonic Source An improvement in RTM method to image steep dip petroleum bearing structures and its superiority to other methods [Volume 8, Issue 4, 2017, Pages 573-578]

  • Harmony Search Algorithm Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]

  • Harmony Search Algorithm A New Method for Forecasting Uniaxial Compressive Strength of Weak Rocks [Volume 11, Issue 2, 2020, Pages 505-515]

  • Head Height An Investigation on Effect of Shell Liner Type on Performance of Industrial SAG Mills Using DEM [Volume 11, Issue 2, 2020, Pages 387-404]

  • Head Height Investigation of Effect of Number of Lifters on Performance of Pilot-Scale SAG Mills Using Discrete Element Method [Volume 11, Issue 3, 2020, Pages 675-693]

  • Heat resistance Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]

  • Heavy Metal Contaminations Geochemical and environmental assessment of heavy metals in soils and sediments of Forumad Chromite mine, NE of Iran [Volume 6, Issue 2, 2015, Pages 251-261]

  • Heavy Metals Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium [Volume 1, Number 1, 2010]

  • Heavy Metals Use of artificial intelligence techniques to predict distribution of heavy metals in groundwater of Lakan lead-zinc mine in Iran [Volume 8, Issue 1, 2017, Pages 35-48]

  • Heavy Metals Heavy metal pollution and identification of their sources in soil over Sangan iron-mining region, NE Iran [Volume 8, Issue 2, 2017, Pages 277-289]

  • Height bench A new technical and economic model to calculate specific charge and specific drilling using hole diameter, height bench, uniaxial compressive strength, and joint set orientation [(Articles in Press)]

  • Height of Destressed Zone Long-term stability analysis of goaf area in longwall mining using minimum potential energy theory [Volume 9, Issue 1, 2018, Pages 169-182]

  • HEM data inversion Inverse modeling of HEM data using a new inversion algorithm [Volume 1, Number 2, 2010]

  • Higher order elements A boundary element/finite difference analysis of subsidence phenomenon due to underground structures [Volume 8, Issue 2, 2017, Pages 237-253]

  • History Matching A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]

  • Histosols Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]

  • Hole diameter A new technical and economic model to calculate specific charge and specific drilling using hole diameter, height bench, uniaxial compressive strength, and joint set orientation [(Articles in Press)]

  • Hole-Effect Geostatistical simulation of dyke systems in Sungun porphyry copper deposit, Iran [Volume 6, Issue 1, 2015, Pages 1-10]

  • Holguin Ore Deposit Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]

  • Homogenization Application of stochastic programming for iron ore quality control [Volume 9, Issue 2, 2018, Pages 331-338]

  • Horizontal Directional Drilling Bayesian prediction of rotational torque to operate horizontal drilling [Volume 10, Issue 2, 2019, Pages 507-515]

  • Horizontal strain A boundary element/finite difference analysis of subsidence phenomenon due to underground structures [Volume 8, Issue 2, 2017, Pages 237-253]

  • Hybrid Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash [Volume 9, Issue 2, 2018, Pages 319-330]

  • Hybrid Model Application of artificial neural network and genetic algorithm to modelling the groundwater inflow to an advancing open pit mine [Volume 6, Issue 1, 2015, Pages 21-30]

  • Hydraulic Fracture Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]

  • Hydraulic Fracturing On the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method [Volume 2, Issue 1, 2011]

  • Hydraulic Fracturing Numerical investigation of effect of crack geometrical parameters on hydraulic fracturing process of hydrocarbon reservoirs [Volume 7, Issue 2, 2016, Pages 205-214]

  • Hydraulic Fracturing Numerical modeling of hydraulic fracturing in carbonate rocks of Bangestan reservoir [Volume 9, Issue 1, 2018, Pages 117-126]

  • Hydraulic Fracturing Propagation Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]

  • Hydrogeology Determination of ground water quality associated with lignite mining in arid climate [Volume 1, Number 1, 2010]

  • Hydrothermal A fuzzy-based prognosis of ore mineralization potentials in Ramand region (Qazvin province) [Volume 8, Issue 3, 2017, Pages 403-418]

  • Hydrothermal Alteration Adaptive Neuro-Fuzzy Inference System application for hydrothermal alteration mapping using ASTER data [Volume 4, Issue 2, 2013, Pages 83-96]

  • Hydrothermal Alteration Sub-pixel classification of hydrothermal alteration zones using a kernel-based method and hyperspectral data; A case study of Sarcheshmeh Porphyry Copper Mine and surrounding area, Kerman, Iran [Volume 8, Issue 4, 2017, Pages 555-565]

  • Hydrothermal Alteration Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]

  • Hydrothermal Alteration Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]

  • Hyperion Data Role of smile correction in mineral detection on hyperion data [Volume 7, Issue 2, 2016, Pages 261-272]

  • Hyperion Data Investigating Alteration Zone Mapping Using EO-1 Hyperion Imagery and Airborne Geophysics Data [Volume 11, Issue 2, 2020, Pages 405-417]

  • Hyperspectral imagery Investigating Alteration Zone Mapping Using EO-1 Hyperion Imagery and Airborne Geophysics Data [Volume 11, Issue 2, 2020, Pages 405-417]

  • Hyperspectral Remote Sensing Sub-pixel classification of hydrothermal alteration zones using a kernel-based method and hyperspectral data; A case study of Sarcheshmeh Porphyry Copper Mine and surrounding area, Kerman, Iran [Volume 8, Issue 4, 2017, Pages 555-565]

  • Hypothetical extraction model Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]

I

  • IGDT A practical approach to open-pit mine planning under price uncertainty using information gap decision theory [Volume 9, Issue 2, 2018, Pages 527-537]

  • Ilmenite Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]

  • Image Analysis of Thin Sections Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]

  • Image Processing Limestone chemical components estimation using image processing and pattern recognition techniques [Volume 2, Issue 2, 2011, Pages 126-135]

  • Impact zone length An Investigation on Effect of Shell Liner Type on Performance of Industrial SAG Mills Using DEM [Volume 11, Issue 2, 2020, Pages 387-404]

  • Impact zone length Investigation of Effect of Number of Lifters on Performance of Pilot-Scale SAG Mills Using Discrete Element Method [Volume 11, Issue 3, 2020, Pages 675-693]

  • Impeller speed Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]

  • Imperialist Competitive Algorithm A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]

  • Imperilist Competitive Algorithm (ICA) Comparison of golden section search method and imperialist competitive algorithm for optimization cut-off grade- case study: Mine No. 1 of Golgohar [Volume 6, Issue 1, 2015, Pages 63-71]

  • Index overlay Comparison of various knowledge-driven and logistic-based mineral prospectivity methods to generate Cu and Au exploration targets Case study: Feyz-Abad area (North of Lut block, NE Iran) [Volume 8, Issue 4, 2017, Pages 611-629]

  • Indirect boundary element method A boundary element/finite difference analysis of subsidence phenomenon due to underground structures [Volume 8, Issue 2, 2017, Pages 237-253]

  • Induced Polarization 3D model construction of induced polarization and resistivity data with quantifying uncertainties using geostatistical methods and drilling (Case study: Madan Bozorg, Iran) [Volume 9, Issue 4, 2018, Pages 857-872]

  • Induced stress A three dimensional geometrical model for calculation of induced stresses surrounding longwall working [Volume 9, Issue 3, 2018, Pages 727-740]

  • Induced stress Wellbore Trajectory Optimization of an Iranian Oilfield Based on Mud Pressure and Failure Zone [Volume 11, Issue 1, 2020, Pages 193-220]

  • Industrial ecosystem Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review [Volume 11, Issue 2, 2020, Pages 517-537]

  • Industrialization Intensity Estimating the function of copper consumption in Iran between 1991- 2011 using Johansen model [Volume 6, Issue 2, 2015, Pages 183-189]

  • Industrial Process A new chart-independent method for fast identification of control level of industrial processes using continuous data [Volume 8, Issue 2, 2017, Pages 203-213]

  • Industrial SAG mills An Investigation on Effect of Shell Liner Type on Performance of Industrial SAG Mills Using DEM [Volume 11, Issue 2, 2020, Pages 387-404]

  • Initial pH Comparison of Copper Dissolution in Chalcopyrite Concentrate Bioleaching with Acidianus Brierleyi in Different Initial pH Values [Volume 11, Issue 3, 2020, Pages 753-764]

  • Initial Settled Density Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]

  • Input-output model Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]

  • In Situ Stresses Numerical modelling of the underground roadways in coal mines– uncertainties caused by use of empirical-based downgrading methods and in situ stresses [Volume 9, Issue 3, 2018, Pages 593-604]

  • Installation Roadway Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]

  • Instantaneous Cutting Rate Development of a site-specific regression model for assessment of road-header cutting performance of Tabas coal mine based on rock properties [Volume 8, Issue 4, 2017, Pages 663-672]

  • Intact rock Predicting Unconfined Compressive Strength of Intact Rock Using New Hybrid Intelligent Models [Volume 11, Issue 1, 2020, Pages 231-246]

  • Intact rock 3D Characterization of Uniaxial Compressive Strength of Transversely-Isotropic Intact Rocks [Volume 11, Issue 2, 2020, Pages 629-641]

  • Intelligent Classifiers Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]

  • Interaction between tunnels A 3D Finite-Difference Analysis of Interaction between a Newly-Driven Large Tunnel with Twin Tunnels in Urban Areas [Volume 11, Issue 3, 2020, Pages 809-823]

  • Interaction Effect Investigation of parameters affecting desilication of diasporic bauxite in Jajarm mine by thermo-chemical treatment [Volume 8, Issue 1, 2017, Pages 75-81]

  • Interface friction A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]

  • Interior Friction Angles A new approach for assessing stability of rock slopes considering centroids of weak zones [Volume 9, Issue 1, 2018, Pages 1-18]

  • Internal Dilution Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]

  • Internal Forces Effect of segmental joint stiffness on tunnel lining internal forces under static conditions [Volume 10, Issue 4, 2019, Pages 1031-1043]

  • Internal Forces Effect of Segmental Joint on Internal Forces in Tunnel Lining under Seismic Loading by Numerical Method [Volume 11, Issue 3, 2020, Pages 737-751]

  • Intersection Lines and Points A new approach for assessing stability of rock slopes considering centroids of weak zones [Volume 9, Issue 1, 2018, Pages 1-18]

  • Inverse Modelling Underground contour (UGC) mapping using potential field, well log and comparing with seismic interpretation in Lavarestan area [Volume 6, Issue 1, 2015, Pages 55-62]

  • Inverse Problem Enhancing magnetic signals in unexploded ordnances (UXO) detection based on edge-preserved stable downward continuation method [Volume 5, Issue 1, 2014, Pages 13-24]

  • Inverse Problem Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]

  • Inversion Estimation of 3D density distribution of chromites deposit using gravity data [Volume 4, Issue 2, 2013, Pages 97-104]

  • Inversion A new method for 3-D magnetic data inversion with physical bound [Volume 8, Issue 3, 2017, Pages 501-510]

  • Inversion Geostatistical Modeling of Electrical Resistivity Tomography for Imaging Porphyry Cu Mineralization in Takht-e-Gonbad Deposit, Iran [Volume 11, Issue 1, 2020, Pages 143-159]

  • Inza (Canada) Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]

  • Ionic Liquid Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]

  • IP/RS attributes Integrating Geophysical Attributes with New Cuckoo Search Machine-Learning Algorithm to Estimate Silver Grade Values–Case Study: Zarshouran Gold Mine [Volume 11, Issue 3, 2020, Pages 865-879]

  • Iran Identification of groundwater contamination sources of Lakan lead and zinc mine, Khomain, Iran [Volume 3, Issue 2, 2012, Pages 121-134]

  • Iran Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method [Volume 8, Issue 1, 2017, Pages 103-110]

  • Iran Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]

  • Iron Mineralogical and physical beneficiation studies for iron extraction from Bardaskan titanomagnetite placer deposit [Volume 8, Issue 2, 2017, Pages 191-201]

  • Iron Gold, Silver and Iron in Iron Oxy-hydroxide Precipitate Formed in Process of Acid Mine Drainage [Volume 11, Issue 2, 2020, Pages 335-346]

  • Iron(III) Oxide Nanoparticles Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]

  • Iron Ore Mine Application of stochastic programming for iron ore quality control [Volume 9, Issue 2, 2018, Pages 331-338]

  • Iron Ore Mine Tailing Mechanical Properties of Low Plasticity Clay Soil Stabilized with Iron Ore Mine Tailing and Portland Cement [Volume 11, Issue 3, 2020, Pages 837-853]

  • Iron ore tailing Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]

  • Iron oxidation Comparison of Copper Dissolution in Chalcopyrite Concentrate Bioleaching with Acidianus Brierleyi in Different Initial pH Values [Volume 11, Issue 3, 2020, Pages 753-764]

  • Iron Removal Iron leaching from bauxite ore in hydrochloric acid using response surface methodology [Volume 6, Issue 1, 2015, Pages 103-108]

  • Iron-rich laterites Dissolution of Nickel and Cobalt from Iron-Rich Laterite Ores Using Different Organic Acids [Volume 11, Issue 3, 2020, Pages 779-797]

  • Isotherm Evaluating performance of natural sepiolite and zeolite nanoparticles for nickel, antimony, and arsenic removal from synthetic wastewater [Volume 9, Issue 4, 2018, Pages 1049-1064]

J

  • Jajarm Gallium extraction from Jajarm Bayer process liquor using micro-emulsions [Volume 8, Issue 2, 2017, Pages 269-276]

  • Jajrood Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method [Volume 8, Issue 1, 2017, Pages 103-110]

  • Jarosite precipitation Comparison of Copper Dissolution in Chalcopyrite Concentrate Bioleaching with Acidianus Brierleyi in Different Initial pH Values [Volume 11, Issue 3, 2020, Pages 753-764]

  • Johansen Model Estimating the function of copper consumption in Iran between 1991- 2011 using Johansen model [Volume 6, Issue 2, 2015, Pages 183-189]

  • Joint Behavior of a Tunnel and its Neighboring Joint with and without Presence of Rock Bolt under Biaxial Loads; Particle Flow Code Approach [Volume 11, Issue 3, 2020, Pages 855-864]

  • Jointed rock mass Numerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: A case study of Bakhtiary Dam of Iran [Volume 4, Issue 1, 2013, Pages 15-26]

  • Joint Inversion Joint inversion of ReMi dispersion curves and refraction travel times using particle swarm optimization algorithm [Volume 7, Issue 1, 2016, Pages 67-79]

  • Joint Mapping Rock mass structural data analysis using image processing techniques (Case study: Choghart iron ore mine northern slopes) [Volume 8, Issue 1, 2017, Pages 61-74]

  • Joints Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel) [Volume 8, Issue 1, 2017, Pages 111-130]

  • Joint set orientation A new technical and economic model to calculate specific charge and specific drilling using hole diameter, height bench, uniaxial compressive strength, and joint set orientation [(Articles in Press)]

K

  • Kahang Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]

  • Kaiser Effect Numerical assessment of influence of confining stress on Kaiser effect using distinct element method [Volume 8, Issue 2, 2017, Pages 215-226]

  • Kangal Lignite Basin A GIS-aided resource estimation of coalfields in Kangal basin, Sivas province, Turkey [Volume 9, Issue 3, 2018, Pages 581-591]

  • Kangan and Dalan Formations Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]

  • Kaolin Modelling of the kaolin deposits and reserve classification challenges of Charentes Basin, France [Volume 1, Number 1, 2010]

  • Karaj water conveyance tunnel Evaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2) [Volume 3, Issue 2, 2012, Pages 89-98]

  • Karstic water Karstic water exploration using the Schlumberger VES and dipole–dipole resistivity profiling surveys in the Tepal area, west of Shahrood, Iran [Volume 5, Issue 1, 2014, Pages 1-12]

  • Karstification Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]

  • Kelex 100 Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]

  • Kelvin model Calculation of tunnel behavior in viscoelastic rock mass [Volume 4, Issue 1, 2013, Pages 27-33]

  • Kenticha Tantalite Ore Mine Green extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid [Volume 9, Issue 4, 2018, Pages 785-794]

  • Kerman Cenozoic Magmatic Arc Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]

  • Kernel A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]

  • Kernel Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]

  • Kernel Functions A comparative study of performance of K-nearest neighbors and support vector machines for classification of groundwater [Volume 7, Issue 2, 2016, Pages 149-164]

  • Keywords: Oxide ore Implementation of flotation and gravity separation, to process Changarzeh sulfide-oxide lead ore [Volume 3, Issue 2, 2012, Pages 79-87]

  • Keywords Waste Rock Dumping Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects [Volume 11, Issue 2, 2020, Pages 577-586]

  • Kinematic analysis A Preliminary Assessment of Rock Slope Stability in Tropical Climates: A Case Study at Lafarge Quarry, Perak, Malaysia [Volume 11, Issue 3, 2020, Pages 661-673]

  • Kinetic Evaluating performance of natural sepiolite and zeolite nanoparticles for nickel, antimony, and arsenic removal from synthetic wastewater [Volume 9, Issue 4, 2018, Pages 1049-1064]

  • Kinetics Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]

  • Kinetic Study Kinetics of chemical leaching of chalcocite from low-grade copper ore: size-distribution behavior [Volume 6, Issue 1, 2015, Pages 109-118]

  • Kirchhoff and WEM Migration An improvement in RTM method to image steep dip petroleum bearing structures and its superiority to other methods [Volume 8, Issue 4, 2017, Pages 573-578]

  • K-means A new approach for assessing stability of rock slopes considering centroids of weak zones [Volume 9, Issue 1, 2018, Pages 1-18]

  • KMPCDEM© Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]

  • K-Nearest Neighbors A comparative study of performance of K-nearest neighbors and support vector machines for classification of groundwater [Volume 7, Issue 2, 2016, Pages 149-164]

  • Korit Application of continuous restricted Boltzmann machine to detect multivariate anomalies from stream sediment geochemical data, Korit, East of Iran [Volume 8, Issue 4, 2017, Pages 673-682]

  • Kriging Evaluation of coalbed methane potential in Parvadeh IV coal deposit in central Iran using a combination of MARS modeling and Kriging [Volume 8, Issue 2, 2017, Pages 305-319]

  • Kriging Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]

  • Kriging Ant colony algorithm as a high-performance method in resource estimation using LVA field; A case study: Choghart Iron ore deposit [Volume 10, Issue 3, 2019, Pages 667-678]

L

  • Lagrangian relaxation A Comprehensive Study of Several Meta-Heuristic Algorithms for Open-Pit Mine Production Scheduling Problem Considering Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 721-736]

  • Lakan Pb and Zn mine Identification of groundwater contamination sources of Lakan lead and zinc mine, Khomain, Iran [Volume 3, Issue 2, 2012, Pages 121-134]

  • Lake Environmental Hazards Associated With Mining Activities in the Vicinity of Bolivian Poopó Lake [Volume 3, Issue 1, 2012, Pages 15-26]

  • Lanczos Bidiagonalization 3D gravity data-space inversion with sparseness and bound constraints [Volume 8, Issue 2, 2017, Pages 227-235]

  • Landsat-8 Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]

  • Large Blocks Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]

  • Large Cross-Section Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]

  • Laterites X-Ray mapping and the mineralogy pattern of nickel laterite ore: Bavanat, Fars, Iran [Volume 10, Issue 3, 2019, Pages 811-820]

  • Latin Hypercube Sampling Commodity price uncertainty propagation in open-pit mine production planning by Latin hypercube sampling method [Volume 7, Issue 2, 2016, Pages 215-227]

  • Lattice Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]

  • Lavarestan Underground contour (UGC) mapping using potential field, well log and comparing with seismic interpretation in Lavarestan area [Volume 6, Issue 1, 2015, Pages 55-62]

  • LCPC test A Correlation for Estimating LCPC Abrasivity Coefficient using Rock Properties [Volume 11, Issue 3, 2020, Pages 799-808]

  • Leaching Investigation on selective rhenium leaching from molybdenite roasting flue dusts [Volume 4, Issue 2, 2013, Pages 77-82]

  • Leaching Iron leaching from bauxite ore in hydrochloric acid using response surface methodology [Volume 6, Issue 1, 2015, Pages 103-108]

  • Leaching Kinetics of chemical leaching of chalcocite from low-grade copper ore: size-distribution behavior [Volume 6, Issue 1, 2015, Pages 109-118]

  • Leaching Kinetics of Sphalerite Leaching by Sodium Nitrate in Sulfuric Acid [Volume 7, Issue 1, 2016, Pages 1-12]

  • Leaching Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]

  • Leaching Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]

  • Leaching Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]

  • Leaching Dissolution of Nickel and Cobalt from Iron-Rich Laterite Ores Using Different Organic Acids [Volume 11, Issue 3, 2020, Pages 779-797]

  • Leaching Kinetics Investigation of leaching kinetics of zinc from a low-grade ore in organic and inorganic acids [Volume 8, Issue 4, 2017, Pages 579-591]

  • Lead Flotation Plant Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]

  • Learning phase TBM Tunneling Construction Time with Respect to Learning Phase Period and Normal Phase Period [Volume 11, Issue 2, 2020, Pages 539-554]

  • LHD Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]

  • Liberation Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]

  • Liberation Degree Mineralogical and physical beneficiation studies for iron extraction from Bardaskan titanomagnetite placer deposit [Volume 8, Issue 2, 2017, Pages 191-201]

  • Lignite Determination of ground water quality associated with lignite mining in arid climate [Volume 1, Number 1, 2010]

  • Limestone Mine Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm [Volume 8, Issue 2, 2017, Pages 291-304]

  • Limestone Mines Prediction of Blasting Cost in Limestone Mines Using Gene Expression Programming Model and Artificial Neural Networks [Volume 11, Issue 1, 2020, Pages 281-300]

  • Linear Elastic Fracture Mechanics (LEFM) Theory A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [Volume 6, Issue 1, 2015, Pages 73-93]

  • Linear elasticity On Analytic Solutions of Elastic Net Displacements around a Circular Tunnel [Volume 11, Issue 2, 2020, Pages 419-432]

  • Linear Superposition Method Blast vibration modeling using linear superposition method [Volume 6, Issue 2, 2015, Pages 125-140]

  • Liner Life Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]

  • Litho-Geochemical Anomaly Determination of geochemical anomalies and gold mineralized stages based on litho-geochemical data for Zarshuran Carlin-like gold deposit (NW Iran) utilizing multi-fractal modeling and stepwise factor analysis [Volume 8, Issue 4, 2017, Pages 593-610]

  • Lithogeochemical Exploration Selection of new exploration targets using lithogeochemical data obtained for Taknar deposit located in NE of Iran [Volume 6, Issue 1, 2015, Pages 11-20]

  • LIX984N Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching [Volume 9, Issue 2, 2018, Pages 393-402]

  • Loader-truck operation Optimal Earthmoving Fleet Size for Minimising Emissions and Cost [(Articles in Press)]

  • Local Linear Model Tree (LOLIMOT) Identification of Geochemical Anomalies Using Fractal and LOLIMOT Neuro-Fuzzy modeling in Mial Area, Central Iran [Volume 11, Issue 1, 2020, Pages 99-117]

  • Locally Varying Anisotropy Ant colony algorithm as a high-performance method in resource estimation using LVA field; A case study: Choghart Iron ore deposit [Volume 10, Issue 3, 2019, Pages 667-678]

  • Local Multivariate Outlier Local multivariate outliers as geochemical anomaly halos indicators, a case study: Hamich area, Southern Khorasan, Iran [Volume 8, Issue 2, 2017, Pages 179-189]

  • Longitudinal Deformation Profile Study of convergence confinement method curves considering pore-pressure effect [Volume 10, Issue 2, 2019, Pages 479-492]

  • Long-term creep Development of a new creep testing equipment to obtain long-term deformation parameters of salt rocks [Volume 3, Issue 1, 2012, Pages 27-32]

  • Longwall Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]

  • Longwall A three dimensional geometrical model for calculation of induced stresses surrounding longwall working [Volume 9, Issue 3, 2018, Pages 727-740]

  • Longwall Mining Long-term stability analysis of goaf area in longwall mining using minimum potential energy theory [Volume 9, Issue 1, 2018, Pages 169-182]

  • Longwall Mining Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]

  • Longwall Mining Applying a technical-economic approach to calculation of optimum panel width in longwall mining method [(Articles in Press)]

  • Longwall Top Coal Caving (LTCC) Analysis of a possible root cause and mechanism for Soma mine disaster [Volume 10, Issue 1, 2019, Pages 1-26]

  • Longwall Working Extension of Excavation Damaged Zone Due to Longwall Working Effect [Volume 7, Issue 1, 2016, Pages 13-24]

  • Low-Grade Iron Ore Beneficiation of a low-grade iron ore by combination of wet low-intensity magnetic separation and reverse flotation methods [Volume 10, Issue 1, 2019, Pages 197-212]

  • Low-Grade Oxide Ore Investigation of leaching kinetics of zinc from a low-grade ore in organic and inorganic acids [Volume 8, Issue 4, 2017, Pages 579-591]

  • L-REM An improvement in RTM method to image steep dip petroleum bearing structures and its superiority to other methods [Volume 8, Issue 4, 2017, Pages 573-578]

  • Lubby 2 Model Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]

  • LULC Assessment of Terrain and Land Use/Land Cover Change of Mine Sites Using Geospatial Techniques in Plateau State, Nigeria [(Articles in Press)]

M

  • MABAC approach Dilution risk ranking in underground metal mines using Multi-Attributive Approximation area Comparison (MABAC) [(Articles in Press)]

  • Machine learning A Comparative Study of SVM and RF Methods for Classification of Alteration Zones Using Remotely Sensed Data [Volume 11, Issue 1, 2020, Pages 49-61]

  • Machine-Learning Integrating Geophysical Attributes with New Cuckoo Search Machine-Learning Algorithm to Estimate Silver Grade Values–Case Study: Zarshouran Gold Mine [Volume 11, Issue 3, 2020, Pages 865-879]

  • Magnetic Data A new method for 3-D magnetic data inversion with physical bound [Volume 8, Issue 3, 2017, Pages 501-510]

  • Magnetic Field Sources Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]

  • Magnetic Nano Minerals Magnetic Nano mineral and acid mine drainage interaction: An experimental study [Volume 8, Issue 3, 2017, Pages 447-453]

  • Magnetic Separation Concentration and recycling of rare earth elements (REEs) from iron mine waste using a combination of physical separation methods [Volume 7, Issue 2, 2016, Pages 195-203]

  • Magnetic Separation A finite element model to simulate magnetic field distribution and laboratory studies in wet low-intensity magnetic separator [Volume 10, Issue 3, 2019, Pages 717-727]

  • Magnetic susceptibility Approximate resistivity and susceptibility mapping from airborne electromagnetic and magnetic data, a case study for a geologically plausible porphyry copper unit in Iran [Volume 4, Issue 2, 2013, Pages 133-146]

  • Magnetic susceptibility Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]

  • Magnetite Mineralogical and physical beneficiation studies for iron extraction from Bardaskan titanomagnetite placer deposit [Volume 8, Issue 2, 2017, Pages 191-201]

  • Magnetite Ore Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]

  • Magnetotellurics Dimensionality analysis of subsurface structures in magnetotellurics using different methods (a case study: oil field in Southwest of Iran) [Volume 7, Issue 1, 2016, Pages 119-126]

  • Main Caving Span Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]

  • Maingate (MG) Fundamental understanding of goaf gas displacement in longwall goaf [Volume 6, Issue 2, 2015, Pages 191-203]

  • Maingate Roadway Extension of Excavation Damaged Zone Due to Longwall Working Effect [Volume 7, Issue 1, 2016, Pages 13-24]

  • Maintainability Maintainability measure based on operating environment, a case study: Sungun copper mine [Volume 8, Issue 3, 2017, Pages 511-521]

  • Maintainability Analysis of reliability and maintainability for multiple repairable units (Case study: Sungun copper mine) [Volume 10, Issue 4, 2019, Pages 1045-1059]

  • Maintenance Reliability-based maintenance scheduling of powered supports in Tabas mechanized coal mine [Volume 5, Issue 2, 2014, Pages 113-120]

  • Malachite Investigation of Mechanism of Adsorption of Xanthate and Hydroxamate on Malachite [Volume 11, Issue 3, 2020, Pages 921-933]

  • MANFIS Use of artificial intelligence techniques to predict distribution of heavy metals in groundwater of Lakan lead-zinc mine in Iran [Volume 8, Issue 1, 2017, Pages 35-48]

  • Manganese Ore Effect of thermal treatment on specific rate of breakage of manganese ore [Volume 9, Issue 2, 2018, Pages 339-348]

  • MARS Modeling Evaluation of coalbed methane potential in Parvadeh IV coal deposit in central Iran using a combination of MARS modeling and Kriging [Volume 8, Issue 2, 2017, Pages 305-319]

  • Masjed-Daghi Copper Deposit Application of fractal modeling to delineate alteration zones and lithological units in Masjed-Daghi Cu-Au porphyry deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 339-356]

  • Masjed-Daghi porphyry copper deposit Delineation of alteration zones based on artificial neural networks and concentration-volume fractal methods in the hypogene zone of porphyry copper-gold deposit, Masjed-Daghi, East Azerbaijan Province, Iran [Volume 10, Issue 4, 2019, Pages 883-901]

  • Material Extraction Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]

  • Mathematical model A new approach to define batch settling curves for analyzing the sedimentation characteristics [Volume 3, Issue 2, 2012, Pages 103-111]

  • Mathematical Modeling Determination of the largest pit with the non-negative net profit in the open pit mines [Volume 1, Number 2, 2010]

  • Mathematical Modeling A New Mathematical Model for Production Scheduling in Sub-level Caving Mining Method [Volume 11, Issue 3, 2020, Pages 765-778]

  • Mathematical Programming Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]

  • Maximum Energy Consumption (MEC) Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms [Volume 10, Issue 2, 2019, Pages 543-557]

  • Maxwell model Calculation of tunnel behavior in viscoelastic rock mass [Volume 4, Issue 1, 2013, Pages 27-33]

  • Mazinu Coal Mine Determination of an optimum interface between open pit and underground mining activities in Mazinu coal mine of Tabas power plant [(Articles in Press)]

  • McCabe-Thiele Diagram Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]

  • MCDM Risk assessment of flyrock in surface mines using FFTA-MCDMs combination [(Articles in Press)]

  • MCDM Investigating and Ranking Blasting Patterns to Reduce Ground Vibration using Soft Computing Approaches and MCDM Technique [Volume 11, Issue 3, 2020, Pages 881-897]

  • Mechanical Activation Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]

  • Mechanical Activation Studying ilmenite dissolution using mechanical activation method [Volume 10, Issue 3, 2019, Pages 763-776]

  • Mechanical Earth Model Development of a mechanical earth model in an Iranian off-shore gas field [Volume 7, Issue 1, 2016, Pages 37-46]

  • Mechanical flotation cell Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]

  • Mechanical rock cutting A state-of-the-art review of mechanical rock excavation technologies [Volume 1, Number 1, 2010]

  • Median Absolute Deviation method Anomaly delineation of porphyry copper deposits of Hanza Region through geochemical data analyses and multispectral remote sensing [Volume 10, Issue 3, 2019, Pages 747-762]

  • Median Indicator Kriging Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]

  • Mesozoic refractory sand Introducing Mesozoic siliciclastic-rich refractory sand levels based on geochemical and physical properties in Iran [Volume 9, Issue 2, 2018, Pages 361-369]

  • Meta-Heuristic Optimization A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]

  • Meta-heuristics Methods A Comprehensive Study of Several Meta-Heuristic Algorithms for Open-Pit Mine Production Scheduling Problem Considering Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 721-736]

  • Metal Bio-Accumulation Metal(loid) uptake of Sonchus oleraceus grown around Cheshmeh-Konan copper deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 517-528]

  • Metal Extraction An applied comparison between conventional pre-dispersed solvent extraction (PDSE) contactors and new dissolved nitrogen PDSE (DNPDSE) ones [Volume 6, Issue 2, 2015, Pages 159-168]

  • Metallurgical industries Pollution problems in the metallurgical industry: A review [Volume 2, Issue 1, 2011, Pages 17-26]

  • Metal Price Prediction Copper Price Prediction using Wave Count with Contribution of Elliott Waves [Volume 11, Issue 3, 2020, Pages 825-835]

  • Methane Impacts of coal shrinkage, permeability and petrography on gas regime in mines Case study: Tahmoor coal mine, NSW, Australia [Volume 1, Number 1, 2010]

  • Methylene Blue Experimental Studies, Response Surface Methodology and Molecular Modeling for Optimization and Mechanism Analysis of Methylene Blue Dye Removal by Different Clays [(Articles in Press)]

  • Methylene blue dye Pre-treatment of toxic element and cationic dye onto natural biomass: characterization and optimization [Volume 10, Issue 3, 2019, Pages 649-658]

  • Mial Identification of Geochemical Anomalies Using Fractal and LOLIMOT Neuro-Fuzzy modeling in Mial Area, Central Iran [Volume 11, Issue 1, 2020, Pages 99-117]

  • Micro-Cracks A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [Volume 6, Issue 1, 2015, Pages 73-93]

  • Micro-Emulsion Gallium extraction from Jajarm Bayer process liquor using micro-emulsions [Volume 8, Issue 2, 2017, Pages 269-276]

  • Microwave Radiation Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]

  • Miduk Porphyry Copper Deposit Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]

  • Mighan Assessment of Heavy Metal Contamination in Waters due to Mineral Salts Company from Mighan playa/lake, Arak, Iran [Volume 11, Issue 1, 2020, Pages 171-184]

  • Migration Velocity Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]

  • Milloieh Application of Power-Law Frequency Fractal Model for Recognition of Vertical Cu Distribution in Milloieh Porphyry Deposit, SE Iran [Volume 11, Issue 2, 2020, Pages 555-562]

  • Mill shell liner type An Investigation on Effect of Shell Liner Type on Performance of Industrial SAG Mills Using DEM [Volume 11, Issue 2, 2020, Pages 387-404]

  • Mineable Block Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]

  • Mine dewatering Formation of a deep pit lake: case study of Aguas Claras, Brazil [Volume 1, Number 1, 2010]

  • Mine Exploitations Negative impacts of mine exploitations on rural regions of Tekab Township [Volume 7, Issue 1, 2016, Pages 57-66]

  • Mine Fire Analysis of a possible root cause and mechanism for Soma mine disaster [Volume 10, Issue 1, 2019, Pages 1-26]

  • Mine No. 1 of Golgohar Comparison of golden section search method and imperialist competitive algorithm for optimization cut-off grade- case study: Mine No. 1 of Golgohar [Volume 6, Issue 1, 2015, Pages 63-71]

  • Mine Pit Application of artificial neural network and genetic algorithm to modelling the groundwater inflow to an advancing open pit mine [Volume 6, Issue 1, 2015, Pages 21-30]

  • Mineral exploration Adaptive Neuro-Fuzzy Inference System application for hydrothermal alteration mapping using ASTER data [Volume 4, Issue 2, 2013, Pages 83-96]

  • Mineral Exploration by Fry Analysis Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]

  • Mineralization A fuzzy-based prognosis of ore mineralization potentials in Ramand region (Qazvin province) [Volume 8, Issue 3, 2017, Pages 403-418]

  • Mineralization Trend Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]

  • Mineralogical Mapping Role of smile correction in mineral detection on hyperion data [Volume 7, Issue 2, 2016, Pages 261-272]

  • Mineralogy Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]

  • Mineralogy X-Ray mapping and the mineralogy pattern of nickel laterite ore: Bavanat, Fars, Iran [Volume 10, Issue 3, 2019, Pages 811-820]

  • Mineral Potential Map Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]

  • Mineral Potential Mapping A GIS-based weights-of-evidence model for mineral potential mapping of hydrothermal gold deposits in Torbat-e-Heydarieh area [Volume 5, Issue 2, 2014, Pages 79-89]

  • Mineral Potential Mapping A comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran [Volume 9, Issue 4, 2018, Pages 917-940]

  • Mineral Prospectivity Mapping Comparison of various knowledge-driven and logistic-based mineral prospectivity methods to generate Cu and Au exploration targets Case study: Feyz-Abad area (North of Lut block, NE Iran) [Volume 8, Issue 4, 2017, Pages 611-629]

  • Mineral Prospectivity Mapping Random forests algorithm in podiform chromite prospectivity mapping in Dolatabad area, SE Iran [Volume 9, Issue 2, 2018, Pages 403-416]

  • Mineral Resource Estimation Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]

  • Mineral Resources Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Mineral Salts Company Assessment of Heavy Metal Contamination in Waters due to Mineral Salts Company from Mighan playa/lake, Arak, Iran [Volume 11, Issue 1, 2020, Pages 171-184]

  • Mineral surface An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]

  • Mine Reclamation Evaluation of Mine Reclamation Criteria Using Delphi-Fuzzy Approach [(Articles in Press)]

  • Mine Tailings Metal extraction competence of plants on waste dumps of magnesite mine, Salem District, South India [Volume 4, Issue 2, 2013, Pages 113-124]

  • Mine Tailings Phytoextraction-based process of metal absorption from soil in mining areas (tailing dams) by Medicago sativa L. (Alfalfa) (Case study: Sarcheshmeh porphyry copper mine, SE of Iran) [Volume 8, Issue 3, 2017, Pages 419-431]

  • Mine Ventilation Network Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]

  • Mine water quality Assessment of water quality due to Wolfram mining in Portugal [Volume 1, Number 2, 2010]

  • Minimum/Maximum Auto-Correlation Factors Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]

  • Minimum Potential Energy Long-term stability analysis of goaf area in longwall mining using minimum potential energy theory [Volume 9, Issue 1, 2018, Pages 169-182]

  • Mining Environmental Hazards Associated With Mining Activities in the Vicinity of Bolivian Poopó Lake [Volume 3, Issue 1, 2012, Pages 15-26]

  • Mining Impact of mining on groundwater quality in SW Ashanti, Ghana: a preliminary study [Volume 7, Issue 1, 2016, Pages 81-95]

  • Mining Mining and Environmental Degradation: a Gift Brings Grief Scenario for Mining Communities in Sierra Leone [Volume 11, Issue 2, 2020, Pages 347-361]

  • Mining and Quarrying Calculating inter-sectoral carbon flows of a mining sector via hypothetical extraction method [Volume 10, Issue 4, 2019, Pages 853-867]

  • Mining industry Copper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study [Volume 10, Issue 4, 2019, Pages 1013-1029]

  • Mining Method Selection A new model for mining method selection based on grey and TODIM methods [Volume 8, Issue 1, 2017, Pages 49-60]

  • Mining Operation Index A quantitative model for evaluation and classification of blastings in open-pit mines [Volume 9, Issue 1, 2018, Pages 127-141]

  • Mining Pit Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]

  • Mining Policy Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Min/Max Autocorrelation Factor A new method to consider spatial risk assessment of cross-correlated heavy metals using geo-statistical simulation [Volume 8, Issue 3, 2017, Pages 373-391]

  • MINTEQ software Predicting Arsenic Behavior in the Wastewater of Mouteh Gold Plant by Geochemical Modeling [Volume 4, Issue 1, 2013, Pages 57-65]

  • Mixed-Mode Extended finite element simulation of crack propagation in cracked Brazilian disc [Volume 6, Issue 1, 2015, Pages 95-102]

  • Mixture System Investigation of performances of solvents D2EHPA, Cyanex272, and their mixture system in separation of some rare earth elements from a Nitric Acid solution [Volume 7, Issue 2, 2016, Pages 143-148]

  • Mobrun 3D gravity data-space inversion with sparseness and bound constraints [Volume 8, Issue 2, 2017, Pages 227-235]

  • Mode II Effects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone) [Volume 9, Issue 2, 2018, Pages 379-391]

  • Modelling Modelling and optimization of digestion efficiency of bauxite in Bayer process: Iran Alumina company [Volume 10, Issue 3, 2019, Pages 799-809]

  • Modified Available Energy Blast Design for Improved Productivity using a Modified Available Energy Method [Volume 11, Issue 3, 2020, Pages 643-659]

  • Mogi-Coulomb Failure Criterion Development of a mechanical earth model in an Iranian off-shore gas field [Volume 7, Issue 1, 2016, Pages 37-46]

  • Moisture content Effects of Flocculant, Surfactant, Coagulant, and Filter Aid on Efficiency of Filtration Processing of Copper Concentrate: Mechanism and Optimization [Volume 11, Issue 1, 2020, Pages 119-141]

  • Molecular Modeling Experimental Studies, Response Surface Methodology and Molecular Modeling for Optimization and Mechanism Analysis of Methylene Blue Dye Removal by Different Clays [(Articles in Press)]

  • Monitoring Monitoring and assessment of pollutants resulting from bench-blasting operations [Volume 7, Issue 1, 2016, Pages 109-118]

  • Monte-Carlo (MC) Simulation Estimation of penetration rate of tunnel boring machines using Monte-Carlo simulation method [Volume 7, Issue 2, 2016, Pages 175-184]

  • Monte Carlo Simulation Probabilistic analysis of stability of chain pillars in Tabas coal mine in Iran using Monte Carlo simulation [Volume 7, Issue 1, 2016, Pages 25-35]

  • Monte Carlo Simulation A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]

  • Monte Carlo Simulation A New Stability Approach using Probabilistic Profile along Direction of Excavation [Volume 11, Issue 1, 2020, Pages 1-20]

  • Monte Carlo Simulation Probabilistic prediction of acid mine drainage generation risk based on pyrite oxidation process in coal washery rejects - A Case Study [(Articles in Press)]

  • Morphological Changes Exploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study [Volume 9, Issue 4, 2018, Pages 1009-1018]

  • MT Inverse modeling of HEM data using a new inversion algorithm [Volume 1, Number 2, 2010]

  • Mud Volcano Subsurface modeling of mud volcanoes, using density model and analysis of seismic velocity [Volume 6, Issue 1, 2015, Pages 31-39]

  • Multi-Criteria Decision Macking Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]

  • Multi-Criteria Decision-Making Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]

  • Multi-Criteria Decision-Making Methods A new model for mining method selection based on grey and TODIM methods [Volume 8, Issue 1, 2017, Pages 49-60]

  • Multi-Fractal Model Geostatistical and multi-fractal modeling of geological and geophysical characteristics in Ghalandar Skarn-Porphyry Cu Deposit, Iran [Volume 10, Issue 4, 2019, Pages 1061-1081]

  • Multiple Indicator Kriging Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]

  • Multiple Non-Linear Regression A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]

  • Multiple-Point Simulation A comprehensive benchmark between two filter-based multiple-point simulation algorithms [Volume 10, Issue 1, 2019, Pages 139-149]

  • Multiple Repairable units Analysis of reliability and maintainability for multiple repairable units (Case study: Sungun copper mine) [Volume 10, Issue 4, 2019, Pages 1045-1059]

  • Multi-resolution Up-scaling A new 2D block ordering system for wavelet-based multi-resolution up-scaling [Volume 9, Issue 4, 2018, Pages 817-828]

  • Multivariable regression An investigation of the particle size effect on coal flotation kinetics using multivariable regression [Volume 1, Number 1, 2010]

  • Multivariate Regression Studying empirical correlation between drilling specific energy and geo-mechanical parameters in an oil field in SW Iran [Volume 8, Issue 3, 2017, Pages 393-401]

  • Multivariate regression analysis Predicting peak particle velocity by artificial neural networks and multivariate regression analysis - Sarcheshmeh copper mine, Kerman, Iran [Volume 4, Issue 2, 2013, Pages 125-132]

N

  • Nano Bubbles Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]

  • Natural depression Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]

  • Negative Impacts Negative impacts of mine exploitations on rural regions of Tekab Township [Volume 7, Issue 1, 2016, Pages 57-66]

  • NE Iran Geochemistry, petrology, and mineralization in volcanic rocks located in south Neyshabour, NE Iran [Volume 8, Issue 2, 2017, Pages 139-154]

  • Net displacements On Analytic Solutions of Elastic Net Displacements around a Circular Tunnel [Volume 11, Issue 2, 2020, Pages 419-432]

  • Net Present Value The effect of price changes on optimum cut-off grade of different open-pit mines [Volume 3, Issue 1, 2012, Pages 61-68]

  • Net Present Value A New Mathematical Model for Production Scheduling in Sub-level Caving Mining Method [Volume 11, Issue 3, 2020, Pages 765-778]

  • Network Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]

  • Neural network Support vector regression for prediction of gas reservoirs permeability [Volume 2, Issue 1, 2011]

  • Neural network Limestone chemical components estimation using image processing and pattern recognition techniques [Volume 2, Issue 2, 2011, Pages 126-135]

  • Neural network Prediction of ultimate strength of shale using artificial neural network [Volume 9, Issue 1, 2018, Pages 91-105]

  • Neural network Estimation of geochemical elements using a hybrid neural network-Gustafson-Kessel algorithm [Volume 9, Issue 2, 2018, Pages 499-511]

  • Neural network Porosity classification from thin sections using image analysis and neural networks including shallow and deep learning in Jahrum formation [Volume 9, Issue 2, 2018, Pages 513-525]

  • New Geometrical Model Extension of Excavation Damaged Zone Due to Longwall Working Effect [Volume 7, Issue 1, 2016, Pages 13-24]

  • Neyshbour Geochemistry, petrology, and mineralization in volcanic rocks located in south Neyshabour, NE Iran [Volume 8, Issue 2, 2017, Pages 139-154]

  • Ni Dissolution of Nickel and Cobalt from Iron-Rich Laterite Ores Using Different Organic Acids [Volume 11, Issue 3, 2020, Pages 779-797]

  • Nickel X-Ray mapping and the mineralogy pattern of nickel laterite ore: Bavanat, Fars, Iran [Volume 10, Issue 3, 2019, Pages 811-820]

  • Ni(II) ions Pre-treatment of toxic element and cationic dye onto natural biomass: characterization and optimization [Volume 10, Issue 3, 2019, Pages 649-658]

  • Nitric Acid Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]

  • Non-Linear Multivariable Regression Analysis Development of a site-specific regression model for assessment of road-header cutting performance of Tabas coal mine based on rock properties [Volume 8, Issue 4, 2017, Pages 663-672]

  • Nonlinear Multivariate Regression Prediction of Blasting Cost in Limestone Mines Using Gene Expression Programming Model and Artificial Neural Networks [Volume 11, Issue 1, 2020, Pages 281-300]

  • Non-Linear Regression Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]

  • Non-Uniform Design Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]

  • Normalized Weighted Index Dimensionality analysis of subsurface structures in magnetotellurics using different methods (a case study: oil field in Southwest of Iran) [Volume 7, Issue 1, 2016, Pages 119-126]

  • Normal phase TBM Tunneling Construction Time with Respect to Learning Phase Period and Normal Phase Period [Volume 11, Issue 2, 2020, Pages 539-554]

  • NPV Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects [Volume 11, Issue 2, 2020, Pages 577-586]

  • Number of Lifters Investigation of Effect of Number of Lifters on Performance of Pilot-Scale SAG Mills Using Discrete Element Method [Volume 11, Issue 3, 2020, Pages 675-693]

  • Numerical Analysis Effect of segmental joint stiffness on tunnel lining internal forces under static conditions [Volume 10, Issue 4, 2019, Pages 1031-1043]

  • Numerical method Effect of Segmental Joint on Internal Forces in Tunnel Lining under Seismic Loading by Numerical Method [Volume 11, Issue 3, 2020, Pages 737-751]

  • Numerical methods Integrating Geophysical Attributes with New Cuckoo Search Machine-Learning Algorithm to Estimate Silver Grade Values–Case Study: Zarshouran Gold Mine [Volume 11, Issue 3, 2020, Pages 865-879]

  • Numerical Modeling Numerical assessment of influence of confining stress on Kaiser effect using distinct element method [Volume 8, Issue 2, 2017, Pages 215-226]

  • Numerical Modeling Numerical modeling of hydraulic fracturing in carbonate rocks of Bangestan reservoir [Volume 9, Issue 1, 2018, Pages 117-126]

  • Numerical Modeling Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]

  • Numerical Modeling Numerical analysis of slide-head-toppling failure [Volume 10, Issue 4, 2019, Pages 1001-1011]

  • Numerical Modeling Numerical Modeling of Rock Slopes with a Potential of Block-Flexural Toppling Failure [Volume 11, Issue 1, 2020, Pages 247-259]

  • Numerical Modeling A Numerical Investigation for TBM Disc Cutter Life Prediction in Hard Rocks [(Articles in Press)]

  • Numerical Modelling Numerical modelling of the underground roadways in coal mines– uncertainties caused by use of empirical-based downgrading methods and in situ stresses [Volume 9, Issue 3, 2018, Pages 593-604]

  • Numerical Modelling A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]

  • Numerical Modelling Sensitivity analysis of stress and cracking in rock mass blasting using numerical modelling [(Articles in Press)]

  • Numerical Simulation Development of a New Experimental Technique for Dynamic Fracture Toughness Measurement of Rocks using Drop Weight Test [Volume 11, Issue 3, 2020, Pages 909-920]

  • Numerical Simulations Hydraulic fracture propagation: analytical solutions versus Lattice simulations [Volume 10, Issue 2, 2019, Pages 451-464]

O

  • Oil Estimating the function of copper consumption in Iran between 1991- 2011 using Johansen model [Volume 6, Issue 2, 2015, Pages 183-189]

  • Oil-Water Contact Application of Bayesian decision making tool in detecting oil-water contact in a carbonate reservoir [Volume 5, Issue 2, 2014, Pages 91-97]

  • Open cut mining Determination of ground water quality associated with lignite mining in arid climate [Volume 1, Number 1, 2010]

  • Open-Pit A practical approach to open-pit mine planning under price uncertainty using information gap decision theory [Volume 9, Issue 2, 2018, Pages 527-537]

  • Open-Pit Investigation of Bishop’s and Janbu’s Models Capabilities on Slope Stability Problems with Special Consideration to Open-Pit Mining Operations [Volume 11, Issue 1, 2020, Pages 161-170]

  • Open-Pit Mine The effect of price changes on optimum cut-off grade of different open-pit mines [Volume 3, Issue 1, 2012, Pages 61-68]

  • Open-Pit Mine Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]

  • Open-Pit Mine Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]

  • Open-Pit Mine A Comprehensive Study of Several Meta-Heuristic Algorithms for Open-Pit Mine Production Scheduling Problem Considering Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 721-736]

  • Open-Pit Mine Production Planning Commodity price uncertainty propagation in open-pit mine production planning by Latin hypercube sampling method [Volume 7, Issue 2, 2016, Pages 215-227]

  • Open-Pit Mine Production Scheduling Robust production scheduling in open-pit mining under uncertainty: a box counterpart approach [Volume 8, Issue 2, 2017, Pages 255-267]

  • Open-pit mines A Hybrid Fuzzy MCDM Approach to Determine an Optimal Block Size in Open-Pit Mine Modeling: a Case Study [Volume 11, Issue 2, 2020, Pages 611-627]

  • Open pit mining A new algorithm for optimum open pit design: Floating cone method III [Volume 2, Issue 2, 2011, Pages 118-125]

  • Open pit mining Determination of an optimum interface between open pit and underground mining activities in Mazinu coal mine of Tabas power plant [(Articles in Press)]

  • Open-Pit Mining UPL determination of multi-element deposits with grade uncertainty using a new block economic value calculation approach [Volume 9, Issue 1, 2018, Pages 61-72]

  • Open Pitting A field investigation of application of digital terrestrial photogrammetry to characterize geometric properties of discontinuities in open-pit slopes [Volume 8, Issue 3, 2017, Pages 455-465]

  • Operating Factors Effects of operating parameters on time-dependent ash entrainment behaviour of a sample coal flotation [Volume 8, Issue 3, 2017, Pages 337-357]

  • Operational Parameters Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]

  • Operational Parameters Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]

  • Operation Research (OR) Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]

  • Opportunity Cost The effect of price changes on optimum cut-off grade of different open-pit mines [Volume 3, Issue 1, 2012, Pages 61-68]

  • Optimization Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill [Volume 5, Issue 2, 2014, Pages 121-128]

  • Optimization Iron leaching from bauxite ore in hydrochloric acid using response surface methodology [Volume 6, Issue 1, 2015, Pages 103-108]

  • Optimization Comparison of golden section search method and imperialist competitive algorithm for optimization cut-off grade- case study: Mine No. 1 of Golgohar [Volume 6, Issue 1, 2015, Pages 63-71]

  • Optimization Permeability upscaling in fractured reservoirs using different optimized mother wavelets at each level [Volume 7, Issue 2, 2016, Pages 239-250]

  • Optimization Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching [Volume 8, Issue 4, 2017, Pages 523-537]

  • Optimization Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]

  • Optimization Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]

  • Optimization Modelling and optimization of digestion efficiency of bauxite in Bayer process: Iran Alumina company [Volume 10, Issue 3, 2019, Pages 799-809]

  • Optimization Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines [Volume 10, Issue 4, 2019, Pages 903-916]

  • Optimization Copper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study [Volume 10, Issue 4, 2019, Pages 1013-1029]

  • Optimization Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]

  • Optimization Use of a mixed integer programming model to achieve an optimum size of blast block in open-pit mining with regard to size of mineable block using fuzzy logic approach [Volume 10, Issue 4, 2019, Pages 1095-1104]

  • Optimization Modeling and Optimization of Truck-Shovel Allocation to Mining Faces in Cement Quarry [Volume 11, Issue 1, 2020, Pages 21-30]

  • Optimization Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects [Volume 11, Issue 2, 2020, Pages 577-586]

  • Optimization A New Mathematical Model for Production Scheduling in Sub-level Caving Mining Method [Volume 11, Issue 3, 2020, Pages 765-778]

  • Optimum mining interface Determination of an optimum interface between open pit and underground mining activities in Mazinu coal mine of Tabas power plant [(Articles in Press)]

  • Optimum panel width Applying a technical-economic approach to calculation of optimum panel width in longwall mining method [(Articles in Press)]

  • Optimum threshold Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]

  • Ordinary Kriging On the reduction of the ordinary kriging smoothing effect [Volume 2, Issue 2, 2011, Pages 102-117]

  • Ordinary Kriging Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]

  • Ordinary Kriging Application of fractal modeling to delineate alteration zones and lithological units in Masjed-Daghi Cu-Au porphyry deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 339-356]

  • Ordinary Kriging Geostatistical estimation to delineate oxide and sulfide zones using geophysical data; a case study of Chahar Bakhshi vein-type gold deposit, NE Iran [Volume 10, Issue 3, 2019, Pages 679-694]

  • Ordinary Kriging Delineation of alteration zones based on artificial neural networks and concentration-volume fractal methods in the hypogene zone of porphyry copper-gold deposit, Masjed-Daghi, East Azerbaijan Province, Iran [Volume 10, Issue 4, 2019, Pages 883-901]

  • Ordinary Kriging (OK) Comparing ordinary kriging and advanced inverse distance squared methods based on estimating coal deposits; case study: East-Parvadeh deposit, central Iran [Volume 9, Issue 3, 2018, Pages 753-760]

  • Ordinary Kriging (OK) Delineation of alteration zones based on kriging, artificial neural networks, and concentration–volume fractal modelings in hypogene zone of Miduk porphyry copper deposit, SE Iran [Volume 10, Issue 3, 2019, Pages 575-595]

  • Ore Detection of Zones Based on Ore and Gangue Using Fractal and Multivariate Analysis in Chah Gaz Iron Ore Deposit, Central Iran [Volume 11, Issue 2, 2020, Pages 453-466]

  • Organic Soil Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]

  • Overall risk rate A Safe and Sustainable Development in a Hygiene and Healthy Company Using Decision Matrix Risk Assessment Technique: a case study [Volume 11, Issue 2, 2020, Pages 363-373]

  • Overburden Topsoil Evaluation of background geochemical speciation of heavy metals in overburden topsoil of bituminous sand deposit area, Ondo state, Nigeria [Volume 10, Issue 4, 2019, Pages 869-882]

  • Oxide and Sulfide Zones Geostatistical estimation to delineate oxide and sulfide zones using geophysical data; a case study of Chahar Bakhshi vein-type gold deposit, NE Iran [Volume 10, Issue 3, 2019, Pages 679-694]

P

  • Panaqueira mine Assessment of water quality due to Wolfram mining in Portugal [Volume 1, Number 2, 2010]

  • Panel Fundamental understanding of goaf gas displacement in longwall goaf [Volume 6, Issue 2, 2015, Pages 191-203]

  • Particle Flow Code Numerical assessment of influence of confining stress on Kaiser effect using distinct element method [Volume 8, Issue 2, 2017, Pages 215-226]

  • Particle Flow Code A 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks [Volume 11, Issue 2, 2020, Pages 467-480]

  • Particle size An investigation of the particle size effect on coal flotation kinetics using multivariable regression [Volume 1, Number 1, 2010]

  • Particle size Interactional effects of bubble size, particle size, and collector dosage on bubble loading in column flotation [Volume 9, Issue 1, 2018, Pages 107-116]

  • Particle size Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles [Volume 9, Issue 2, 2018, Pages 539-546]

  • Particle Swarm Optimization Joint inversion of ReMi dispersion curves and refraction travel times using particle swarm optimization algorithm [Volume 7, Issue 1, 2016, Pages 67-79]

  • Particle Swarm Optimization A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]

  • Particle Swarm Optimization Using a combination of genetic algorithm and particle swarm optimization algorithm for GEMTIP modeling of spectral-induced polarization data [Volume 10, Issue 2, 2019, Pages 493-505]

  • Particle Swarm Optimization Predicting Unconfined Compressive Strength of Intact Rock Using New Hybrid Intelligent Models [Volume 11, Issue 1, 2020, Pages 231-246]

  • Parvadeh-I coal mine Applying a technical-economic approach to calculation of optimum panel width in longwall mining method [(Articles in Press)]

  • Parvadeh IV Tabas Evaluation of coalbed methane potential in Parvadeh IV coal deposit in central Iran using a combination of MARS modeling and Kriging [Volume 8, Issue 2, 2017, Pages 305-319]

  • Pattern Recognition Prediction of mineral deposit model and identification of mineralization trend in depth using frequency domain of surface geochemical data in Dalli Cu-Au porphyry deposit [Volume 6, Issue 2, 2015, Pages 225-236]

  • Pattern Recognition Prediction of dispersed mineralization zone in depth using frequency domain of surface geochemical data [Volume 8, Issue 3, 2017, Pages 433-446]

  • Pattern Recognition Detection of Mo geochemical anomaly in depth using a new scenario based on spectrum–area fractal analysis [Volume 10, Issue 3, 2019, Pages 695-704]

  • Pb(II) Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium [Volume 1, Number 1, 2010]

  • Pb-Zn mineralization Application of alteration index and zoning for Pb-Znexploration in Haft-Savaran area, Khomein, Iran [Volume 9, Issue 1, 2018, Pages 229-242]

  • Peak particle velocity Predicting peak particle velocity by artificial neural networks and multivariate regression analysis - Sarcheshmeh copper mine, Kerman, Iran [Volume 4, Issue 2, 2013, Pages 125-132]

  • Peak particle velocity Numerical analysis of energy transmission through discontinuities and fillings in Kangir Dam [Volume 7, Issue 2, 2016, Pages 251-259]

  • Peak particle velocity (PPV) Blast vibration modeling using linear superposition method [Volume 6, Issue 2, 2015, Pages 125-140]

  • Peatland Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]

  • Pelletizing Plant Increasing drying efficiency by modifying the design of feed chute of the Gol-e-Gohar pelletizing plant ball mill [Volume 10, Issue 1, 2019, Pages 213-221]

  • Penetration Rate Estimation of penetration rate of tunnel boring machines using Monte-Carlo simulation method [Volume 7, Issue 2, 2016, Pages 175-184]

  • Perfect Mixing Model Application of perfect mixing model for simulation of vertical roller mills [Volume 8, Issue 4, 2017, Pages 545-553]

  • Performance Study An applied comparison between conventional pre-dispersed solvent extraction (PDSE) contactors and new dissolved nitrogen PDSE (DNPDSE) ones [Volume 6, Issue 2, 2015, Pages 159-168]

  • Permeability Impacts of coal shrinkage, permeability and petrography on gas regime in mines Case study: Tahmoor coal mine, NSW, Australia [Volume 1, Number 1, 2010]

  • Permeability Support vector regression for prediction of gas reservoirs permeability [Volume 2, Issue 1, 2011]

  • Permeability Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]

  • PFC2D Behavior of a Tunnel and its Neighboring Joint with and without Presence of Rock Bolt under Biaxial Loads; Particle Flow Code Approach [Volume 11, Issue 3, 2020, Pages 855-864]

  • PFC2D Numerical investigation of the effect of rock bolt angle on the shear behavior of rock bridge [(Articles in Press)]

  • Phanerochaete chrysosporium Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium [Volume 1, Number 1, 2010]

  • Phillips Mathematical Model Semi-quantitative environmental impact assessment and sustainability level determination of coal mining using a mathematical model [Volume 7, Issue 2, 2016, Pages 185-193]

  • Physical and Mechanical Properties A laboratory study of rock properties affecting the penetration rate of pneumatic top hammer drills [Volume 5, Issue 1, 2014, Pages 25-34]

  • Physical Bound A new method for 3-D magnetic data inversion with physical bound [Volume 8, Issue 3, 2017, Pages 501-510]

  • Physical Modeling Effect of large blocks position on stability analysis of block-in-matrix slopes [Volume 10, Issue 2, 2019, Pages 465-477]

  • Physical modelling Physical modelling of caving propagation process and damage profile ahead of the cave-back [(Articles in Press)]

  • Physical Properties Predicting tensile strength of rocks from physical properties based on support vector regression optimized by cultural algorithm [Volume 8, Issue 3, 2017, Pages 467-474]

  • Physical Properties A New Method for Predicting Indirect Tensile Strength of Sandstone Rock Samples [Volume 11, Issue 3, 2020, Pages 899-908]

  • Phytoextraction Phytoextraction-based process of metal absorption from soil in mining areas (tailing dams) by Medicago sativa L. (Alfalfa) (Case study: Sarcheshmeh porphyry copper mine, SE of Iran) [Volume 8, Issue 3, 2017, Pages 419-431]

  • Phytoremediation Metal extraction competence of plants on waste dumps of magnesite mine, Salem District, South India [Volume 4, Issue 2, 2013, Pages 113-124]

  • Phytoremediation Using Trifolium Alexanderium for Phytoremediation of some heavy metals in tailings dam in Anjir-Tange coal washing plant, Mazandaran, Iran [Volume 6, Issue 2, 2015, Pages 141-150]

  • Pilot Scale SAG Mill Investigation of Effect of Number of Lifters on Performance of Pilot-Scale SAG Mills Using Discrete Element Method [Volume 11, Issue 3, 2020, Pages 675-693]

  • Piper diagram Determination of ground water quality associated with lignite mining in arid climate [Volume 1, Number 1, 2010]

  • Pit lake Formation of a deep pit lake: case study of Aguas Claras, Brazil [Volume 1, Number 1, 2010]

  • Pit limits UPL determination of multi-element deposits with grade uncertainty using a new block economic value calculation approach [Volume 9, Issue 1, 2018, Pages 61-72]

  • Playa/lake Assessment of Heavy Metal Contamination in Waters due to Mineral Salts Company from Mighan playa/lake, Arak, Iran [Volume 11, Issue 1, 2020, Pages 171-184]

  • Podiform Chromite Deposits Random forests algorithm in podiform chromite prospectivity mapping in Dolatabad area, SE Iran [Volume 9, Issue 2, 2018, Pages 403-416]

  • Podiform-type chromite Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]

  • Pollution Indices Metal(loid) uptake of Sonchus oleraceus grown around Cheshmeh-Konan copper deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 517-528]

  • Poroelastic Formations Behavior of a hydraulic fracture in permeable formations [Volume 9, Issue 4, 2018, Pages 893-904]

  • Porphyry Exploration of Kahang porphyry copper deposit using advanced integration of geological, remote sensing, geochemical, and magnetics data [Volume 9, Issue 1, 2018, Pages 19-39]

  • Porphyry copper A Comparative Study of SVM and RF Methods for Classification of Alteration Zones Using Remotely Sensed Data [Volume 11, Issue 1, 2020, Pages 49-61]

  • Porphyry copper Development of Geometallurgical Indices for Semi-Autogenous Grinding at Sarcheshmeh Porphyry Copper Mine [Volume 11, Issue 2, 2020, Pages 375-385]

  • Porphyry Copper Deposit Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]

  • Porphyry Copper Deposits Anomaly delineation of porphyry copper deposits of Hanza Region through geochemical data analyses and multispectral remote sensing [Volume 10, Issue 3, 2019, Pages 747-762]

  • Porphyry copper unit Approximate resistivity and susceptibility mapping from airborne electromagnetic and magnetic data, a case study for a geologically plausible porphyry copper unit in Iran [Volume 4, Issue 2, 2013, Pages 133-146]

  • Porphyry Cu Geostatistical Modeling of Electrical Resistivity Tomography for Imaging Porphyry Cu Mineralization in Takht-e-Gonbad Deposit, Iran [Volume 11, Issue 1, 2020, Pages 143-159]

  • Portland Cement Mechanical Properties of Low Plasticity Clay Soil Stabilized with Iron Ore Mine Tailing and Portland Cement [Volume 11, Issue 3, 2020, Pages 837-853]

  • Post-Collision Volcanic Rocks Geochemistry, petrology, and mineralization in volcanic rocks located in south Neyshabour, NE Iran [Volume 8, Issue 2, 2017, Pages 139-154]

  • Potassium Amyl Xanthate Exploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study [Volume 9, Issue 4, 2018, Pages 1009-1018]

  • Potential ecological risk Evaluation of stream sediment contamination by potentially toxic elements around mining and farming areas (SE Nigeria) [Volume 10, Issue 4, 2019, Pages 833-851]

  • Potential Field Data An improved method for geological boundary detection of potential field anomalies [Volume 1, Number 2, 2010]

  • Potential Field Data AN-EUL method for automatic interpretation of potential field data in unexploded ordnances (UXO) detection [Volume 5, Issue 2, 2014, Pages 67-77]

  • Potential Field Data Underground contour (UGC) mapping using potential field, well log and comparing with seismic interpretation in Lavarestan area [Volume 6, Issue 1, 2015, Pages 55-62]

  • Potentially toxic elements Evaluation of stream sediment contamination by potentially toxic elements around mining and farming areas (SE Nigeria) [Volume 10, Issue 4, 2019, Pages 833-851]

  • Power-law frequency fractal model Application of Power-Law Frequency Fractal Model for Recognition of Vertical Cu Distribution in Milloieh Porphyry Deposit, SE Iran [Volume 11, Issue 2, 2020, Pages 555-562]

  • Power Spectrum Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]

  • Power Spectrum–Area Fractal Analysis Detection of Mo geochemical anomaly in depth using a new scenario based on spectrum–area fractal analysis [Volume 10, Issue 3, 2019, Pages 695-704]

  • PPV Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm [Volume 8, Issue 2, 2017, Pages 291-304]

  • Prediction Risk prediction based on a time series case study: Tazareh coal mine [Volume 7, Issue 1, 2016, Pages 127-134]

  • Prediction Limestone chemical components estimation using image processing and pattern recognition techniques [Volume 2, Issue 2, 2011, Pages 126-135]

  • Prediction Bayesian prediction of rotational torque to operate horizontal drilling [Volume 10, Issue 2, 2019, Pages 507-515]

  • Prediction A review of Rock Burst’s Experimental Progress, Warning, Prediction, Control and Damage Potential Measures [Volume 11, Issue 1, 2020, Pages 31-48]

  • Prediction Map Estimation of coal seams gas content for evaluating potential use of methane drainage system in Tabas coal mine [Volume 9, Issue 3, 2018, Pages 667-677]

  • Pre-Dispersed Solvent Extraction (PDSE) Contractor An applied comparison between conventional pre-dispersed solvent extraction (PDSE) contactors and new dissolved nitrogen PDSE (DNPDSE) ones [Volume 6, Issue 2, 2015, Pages 159-168]

  • Pregnant leach solution Solvent extraction of copper from an industrial sulfate liquor using Chemorex CP-150 [Volume 9, Issue 4, 2018, Pages 905-916]

  • Pressure Calculation of tunnel behavior in viscoelastic rock mass [Volume 4, Issue 1, 2013, Pages 27-33]

  • Pressure Tunnel An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]

  • Pretension Loads Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]

  • Preventive maintenance Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]

  • Price Estimating the function of copper consumption in Iran between 1991- 2011 using Johansen model [Volume 6, Issue 2, 2015, Pages 183-189]

  • Price Optimal production strategy of bimetallic deposits under technical and economic uncertainties using stochastic chance-constrained programming [Volume 8, Issue 3, 2017, Pages 475-485]

  • Primary and Secondary Concentrations Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]

  • Principal Component Analysis Prediction of mineral deposit model and identification of mineralization trend in depth using frequency domain of surface geochemical data in Dalli Cu-Au porphyry deposit [Volume 6, Issue 2, 2015, Pages 225-236]

  • Principal Component Analysis Prediction of dispersed mineralization zone in depth using frequency domain of surface geochemical data [Volume 8, Issue 3, 2017, Pages 433-446]

  • Principal Component Analysis Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]

  • Principal Component Analysis Detection of Mo geochemical anomaly in depth using a new scenario based on spectrum–area fractal analysis [Volume 10, Issue 3, 2019, Pages 695-704]

  • Probabilistic Analysis A new brittleness index for estimation of rock fracture toughness [Volume 8, Issue 1, 2017, Pages 83-91]

  • Probabilistic Method Probabilistic analysis of stability of chain pillars in Tabas coal mine in Iran using Monte Carlo simulation [Volume 7, Issue 1, 2016, Pages 25-35]

  • Processing Plant Application of stochastic programming for iron ore quality control [Volume 9, Issue 2, 2018, Pages 331-338]

  • Process Monitoring A new chart-independent method for fast identification of control level of industrial processes using continuous data [Volume 8, Issue 2, 2017, Pages 203-213]

  • Production Optimization Development of a goal programming model for optimization of truck allocation in open pit mines [Volume 8, Issue 3, 2017, Pages 359-371]

  • Production Rate Ranking sawability of dimension stone using PROMETHEE method [Volume 6, Issue 2, 2015, Pages 263-271]

  • Production Rate Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models [Volume 10, Issue 4, 2019, Pages 1105-1119]

  • Production Scheduling A New Mathematical Model for Production Scheduling in Sub-level Caving Mining Method [Volume 11, Issue 3, 2020, Pages 765-778]

  • PROMETHEE Method Ranking sawability of dimension stone using PROMETHEE method [Volume 6, Issue 2, 2015, Pages 263-271]

  • Proportional Repair Model (PRM) Maintainability measure based on operating environment, a case study: Sungun copper mine [Volume 8, Issue 3, 2017, Pages 511-521]

  • Proximate Parameters A programming method to estimate proximate parameters of coal beds from well-logging data using a sequential solving of linear equation systems [Volume 10, Issue 3, 2019, Pages 633-647]

  • Purolite A170 Studying effects of ion exchange resin structure and functional groups on Re(VII) adsorption onto Purolite A170 and Dowex 21K [Volume 9, Issue 1, 2018, Pages 243-254]

Q

  • Qolqoleh Gold Deposit Investigation of linear and non-linear estimation methods in highly-skewed gold distribution [Volume 9, Issue 4, 2018, Pages 967-979]

  • Qomroud tunnel The use of analytic hierarchy process in the selection of suitable excavation machine for Dez - Qomroud water conveyance tunnel (lot 1&2), Iran [Volume 2, Issue 1, 2011]

  • Quarry Selection of the best strategy for Iran's quarries: SWOT-FAHP method [Volume 3, Issue 1, 2012, Pages 1-13]

  • Quickbird Hydrothermal alterations mapping using Quickbird and Landsat-8 data, a case study from Babbiduyeh, Kerman province, Iran [Volume 9, Issue 1, 2018, Pages 41-52]

  • Quiescent zone Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]

R

  • Radiation Counter Assessment of radioactive contamination in water bodies around mine workings using radiation counter [Volume 9, Issue 4, 2018, Pages 795-806]

  • Radioactive Trace Elements Assessment of radioactive contamination in water bodies around mine workings using radiation counter [Volume 9, Issue 4, 2018, Pages 795-806]

  • Radioactivity Assessment of radioactive contamination in water bodies around mine workings using radiation counter [Volume 9, Issue 4, 2018, Pages 795-806]

  • Ramand A fuzzy-based prognosis of ore mineralization potentials in Ramand region (Qazvin province) [Volume 8, Issue 3, 2017, Pages 403-418]

  • Random Forest A Comparative Study of SVM and RF Methods for Classification of Alteration Zones Using Remotely Sensed Data [Volume 11, Issue 1, 2020, Pages 49-61]

  • Random Forests Random forests algorithm in podiform chromite prospectivity mapping in Dolatabad area, SE Iran [Volume 9, Issue 2, 2018, Pages 403-416]

  • Ranking Dilution risk ranking in underground metal mines using Multi-Attributive Approximation area Comparison (MABAC) [(Articles in Press)]

  • Rare Earth Elements Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint [Volume 10, Issue 2, 2019, Pages 373-388]

  • Rare Earth Elements Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]

  • Rare Earth Elements (REEs) Investigation of performances of solvents D2EHPA, Cyanex272, and their mixture system in separation of some rare earth elements from a Nitric Acid solution [Volume 7, Issue 2, 2016, Pages 143-148]

  • Rare Earth Elements (REEs) Concentration and recycling of rare earth elements (REEs) from iron mine waste using a combination of physical separation methods [Volume 7, Issue 2, 2016, Pages 195-203]

  • Reaction Kinetics Kinetics of Sphalerite Leaching by Sodium Nitrate in Sulfuric Acid [Volume 7, Issue 1, 2016, Pages 1-12]

  • Rear Shaft Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution [Volume 9, Issue 3, 2018, Pages 547-557]

  • Reclamation Criteria Evaluation of Mine Reclamation Criteria Using Delphi-Fuzzy Approach [(Articles in Press)]

  • Recovery Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district [Volume 6, Issue 2, 2015, Pages 237-249]

  • Red Mud Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash [Volume 9, Issue 2, 2018, Pages 319-330]

  • Regression Analysis Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method [Volume 9, Issue 3, 2018, Pages 717-726]

  • Regression method Prediction of the deformation modulus of rock masses using Artificial Neural Networks and Regression methods [Volume 4, Issue 1, 2013, Pages 35-43]

  • Regularization A new method for 3-D magnetic data inversion with physical bound [Volume 8, Issue 3, 2017, Pages 501-510]

  • Regularization Parameter Automatic estimation of regularization parameter by active constraint balancing method for 3D inversion of gravity data [Volume 10, Issue 2, 2019, Pages 357-364]

  • Regulators Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution [Volume 9, Issue 3, 2018, Pages 547-557]

  • Reinforced Concrete Lining An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]

  • Reliability Reliability-based maintenance scheduling of powered supports in Tabas mechanized coal mine [Volume 5, Issue 2, 2014, Pages 113-120]

  • Reliability Estimation of reliability-based maintenance time intervals of Load-Haul-Dumper in an underground coal mine [Volume 9, Issue 3, 2018, Pages 761-770]

  • Reliability Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]

  • Reliability Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]

  • Reliability Analysis of reliability and maintainability for multiple repairable units (Case study: Sungun copper mine) [Volume 10, Issue 4, 2019, Pages 1045-1059]

  • Reliability analysis Probabilistic analysis of stability of chain pillars in Tabas coal mine in Iran using Monte Carlo simulation [Volume 7, Issue 1, 2016, Pages 25-35]

  • Remediation technologies Application of Phytoremediation to Reduce Environmental Pollution of Copper Smelting and Refinery Factories: a Review [Volume 11, Issue 2, 2020, Pages 517-537]

  • Remi Joint inversion of ReMi dispersion curves and refraction travel times using particle swarm optimization algorithm [Volume 7, Issue 1, 2016, Pages 67-79]

  • Reservoir Characterization Improving reservoir rock classification in heterogeneous carbonates using boosting and bagging strategies: A case study of early Triassic carbonates of coastal Fars, south Iran [Volume 9, Issue 4, 2018, Pages 839-855]

  • Residence Time Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade [Volume 8, Issue 4, 2017, Pages 539-544]

  • Resistivity 3D model construction of induced polarization and resistivity data with quantifying uncertainties using geostatistical methods and drilling (Case study: Madan Bozorg, Iran) [Volume 9, Issue 4, 2018, Pages 857-872]

  • Resistivity Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]

  • Resistivity profiling Karstic water exploration using the Schlumberger VES and dipole–dipole resistivity profiling surveys in the Tepal area, west of Shahrood, Iran [Volume 5, Issue 1, 2014, Pages 1-12]

  • Resource Estimation A GIS-aided resource estimation of coalfields in Kangal basin, Sivas province, Turkey [Volume 9, Issue 3, 2018, Pages 581-591]

  • Resource Estimation Fundamentals of 3D modelling and resource estimation in coal mining [Volume 9, Issue 3, 2018, Pages 623-639]

  • Resource Estimation Ant colony algorithm as a high-performance method in resource estimation using LVA field; A case study: Choghart Iron ore deposit [Volume 10, Issue 3, 2019, Pages 667-678]

  • Resource Recycling Production of artificial stone slabs using waste granite and marble stone sludge samples [Volume 7, Issue 1, 2016, Pages 135-141]

  • Response Surface Experimental Studies, Response Surface Methodology and Molecular Modeling for Optimization and Mechanism Analysis of Methylene Blue Dye Removal by Different Clays [(Articles in Press)]

  • Response Surface Methodology (RSM) Iron leaching from bauxite ore in hydrochloric acid using response surface methodology [Volume 6, Issue 1, 2015, Pages 103-108]

  • Reverse Flotation Beneficiation of a low-grade iron ore by combination of wet low-intensity magnetic separation and reverse flotation methods [Volume 10, Issue 1, 2019, Pages 197-212]

  • Reverse Flotation Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]

  • Rigid Plastic Model Analytical analysis of ultimate ground pressure on tunnel support system [Volume 6, Issue 2, 2015, Pages 151-157]

  • Risk Risk prediction based on a time series case study: Tazareh coal mine [Volume 7, Issue 1, 2016, Pages 127-134]

  • Risk Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]

  • RMR Evaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2) [Volume 3, Issue 2, 2012, Pages 89-98]

  • Road-Header Machine Development of a site-specific regression model for assessment of road-header cutting performance of Tabas coal mine based on rock properties [Volume 8, Issue 4, 2017, Pages 663-672]

  • Robust Counterpart Optimization Robust production scheduling in open-pit mining under uncertainty: a box counterpart approach [Volume 8, Issue 2, 2017, Pages 255-267]

  • Rock Numerical assessment of influence of confining stress on Kaiser effect using distinct element method [Volume 8, Issue 2, 2017, Pages 215-226]

  • Rock Abrasivity Determination of scratching energy index for Cerchar abrasion test [Volume 9, Issue 1, 2018, Pages 73-89]

  • Rock Abrasivity A Modified Schimazek’s F-abrasiveness Factor for Evaluating Abrasiveness of Andesite Rocks in Rock Sawing Process [Volume 11, Issue 2, 2020, Pages 563-575]

  • Rock Abrasivity Index Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties [Volume 10, Issue 4, 2019, Pages 917-928]

  • Rock breakage A state-of-the-art review of mechanical rock excavation technologies [Volume 1, Number 1, 2010]

  • Rock Engineering Systems (RES) Determination and assessment of coal bed methane potential using rock engineering systems [Volume 9, Issue 3, 2018, Pages 605-621]

  • Rock Failure Numerical modelling of the underground roadways in coal mines– uncertainties caused by use of empirical-based downgrading methods and in situ stresses [Volume 9, Issue 3, 2018, Pages 593-604]

  • Rock foundations A 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks [Volume 11, Issue 2, 2020, Pages 467-480]

  • Rock fracture mechanics On the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method [Volume 2, Issue 1, 2011]

  • Rock Fracture Toughness A new brittleness index for estimation of rock fracture toughness [Volume 8, Issue 1, 2017, Pages 83-91]

  • Rock-Like Specimens A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [Volume 6, Issue 1, 2015, Pages 73-93]

  • Rock mass classification A Preliminary Assessment of Rock Slope Stability in Tropical Climates: A Case Study at Lafarge Quarry, Perak, Malaysia [Volume 11, Issue 3, 2020, Pages 661-673]

  • Rock Mass Explosion Discrete element modeling of explosion-induced fracture extension in jointed rock masses [Volume 10, Issue 1, 2019, Pages 125-138]

  • Rock mass modulus Prediction of the deformation modulus of rock masses using Artificial Neural Networks and Regression methods [Volume 4, Issue 1, 2013, Pages 35-43]

  • Rock mass rating A Preliminary Assessment of Rock Slope Stability in Tropical Climates: A Case Study at Lafarge Quarry, Perak, Malaysia [Volume 11, Issue 3, 2020, Pages 661-673]

  • Rock Mass Structure A field investigation of application of digital terrestrial photogrammetry to characterize geometric properties of discontinuities in open-pit slopes [Volume 8, Issue 3, 2017, Pages 455-465]

  • Rock Material A laboratory study of rock properties affecting the penetration rate of pneumatic top hammer drills [Volume 5, Issue 1, 2014, Pages 25-34]

  • Rock Properties A state-of-the-art review of mechanical rock excavation technologies [Volume 1, Number 1, 2010]

  • Rock Properties Development of a site-specific regression model for assessment of road-header cutting performance of Tabas coal mine based on rock properties [Volume 8, Issue 4, 2017, Pages 663-672]

  • Rock Properties Effect of temperature as well as heating and cooling cycles on rock properties [Volume 8, Issue 4, 2017, Pages 631-644]

  • Rock Properties A Correlation for Estimating LCPC Abrasivity Coefficient using Rock Properties [Volume 11, Issue 3, 2020, Pages 799-808]

  • Rock Salt Presenting an experimental creep model for rock salt [Volume 9, Issue 2, 2018, Pages 441-456]

  • Rock sawing process A Modified Schimazek’s F-abrasiveness Factor for Evaluating Abrasiveness of Andesite Rocks in Rock Sawing Process [Volume 11, Issue 2, 2020, Pages 563-575]

  • Rock Slopes Numerical analysis of slide-head-toppling failure [Volume 10, Issue 4, 2019, Pages 1001-1011]

  • Rock Slopes Numerical Modeling of Rock Slopes with a Potential of Block-Flexural Toppling Failure [Volume 11, Issue 1, 2020, Pages 247-259]

  • Rock strength New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]

  • Roof rock Application of Schmidt rebound number for estimating rock strength under specific geological conditions [Volume 1, Number 2, 2010]

  • Rotational Torque Bayesian prediction of rotational torque to operate horizontal drilling [Volume 10, Issue 2, 2019, Pages 507-515]

  • RSM Dissolution of Nickel and Cobalt from Iron-Rich Laterite Ores Using Different Organic Acids [Volume 11, Issue 3, 2020, Pages 779-797]

  • RTM An improvement in RTM method to image steep dip petroleum bearing structures and its superiority to other methods [Volume 8, Issue 4, 2017, Pages 573-578]

S

  • Sabalan Determining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach [Volume 8, Issue 1, 2017, Pages 93-101]

  • Sabzevar Ophiolite Complex (SOC) Geochemical and environmental assessment of heavy metals in soils and sediments of Forumad Chromite mine, NE of Iran [Volume 6, Issue 2, 2015, Pages 251-261]

  • SAG Mill Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills [Volume 2, Issue 1, 2011]

  • SAG Mill Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]

  • Salt Cavern Feasibility study of underground salt caverns in Western Newfoundland: experimental and finite element investigation of creep-induced damage [Volume 6, Issue 2, 2015, Pages 205-224]

  • Salt Cavern Stability Analysis of Salt Cavern Gas Storage Using 2D Thermo-Hydro-Mechanical Finite-Element Software [Volume 11, Issue 1, 2020, Pages 77-97]

  • Saltwater Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method [Volume 8, Issue 1, 2017, Pages 103-110]

  • SAM algorithm Investigating Alteration Zone Mapping Using EO-1 Hyperion Imagery and Airborne Geophysics Data [Volume 11, Issue 2, 2020, Pages 405-417]

  • S-A Multi-Fractal A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]

  • Sandstone Effects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone) [Volume 9, Issue 2, 2018, Pages 379-391]

  • Sandstone Effect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study) [Volume 10, Issue 1, 2019, Pages 257-270]

  • Sangan Determination of unstable tectonic zones in C–North deposit, Sangan, NE Iran using GPR method: importance of structural geology [Volume 10, Issue 1, 2019, Pages 177-195]

  • Sangan Mine Heavy metal pollution and identification of their sources in soil over Sangan iron-mining region, NE Iran [Volume 8, Issue 2, 2017, Pages 277-289]

  • Sarcheshmeh Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]

  • Sarcheshmeh, comminution Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills [Volume 2, Issue 1, 2011]

  • Sarcheshmeh Copper Mine Phytoextraction-based process of metal absorption from soil in mining areas (tailing dams) by Medicago sativa L. (Alfalfa) (Case study: Sarcheshmeh porphyry copper mine, SE of Iran) [Volume 8, Issue 3, 2017, Pages 419-431]

  • Sar-Cheshmeh Copper Mine Blast vibration modeling using linear superposition method [Volume 6, Issue 2, 2015, Pages 125-140]

  • Saturated Zone Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method [Volume 8, Issue 1, 2017, Pages 103-110]

  • Sawability Ranking Ranking sawability of dimension stone using PROMETHEE method [Volume 6, Issue 2, 2015, Pages 263-271]

  • Schimazek’s F-abrasiveness factor A Modified Schimazek’s F-abrasiveness Factor for Evaluating Abrasiveness of Andesite Rocks in Rock Sawing Process [Volume 11, Issue 2, 2020, Pages 563-575]

  • Schlumberger array Karstic water exploration using the Schlumberger VES and dipole–dipole resistivity profiling surveys in the Tepal area, west of Shahrood, Iran [Volume 5, Issue 1, 2014, Pages 1-12]

  • Schmidt number Application of Schmidt rebound number for estimating rock strength under specific geological conditions [Volume 1, Number 2, 2010]

  • Scratching Energy Index Determination of scratching energy index for Cerchar abrasion test [Volume 9, Issue 1, 2018, Pages 73-89]

  • Seals Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution [Volume 9, Issue 3, 2018, Pages 547-557]

  • Sedimentary Rock Mass Quality Index Efficiency of seismic wave velocity and electrical resistivity in estimation of limestone rock mass quality indices (Q, Qsrm) (Case study: Asmari formation, SW Iran) [Volume 10, Issue 2, 2019, Pages 529-541]

  • Sediment Transport Experimental study on appropriate location of river material mining pits regarding extraction and utilization [Volume 10, Issue 1, 2019, Pages 163-175]

  • Seepage Control An optimal method to design reinforced concrete lining of pressure tunnels [Volume 9, Issue 4, 2018, Pages 829-837]

  • Segmental Lining Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel) [Volume 8, Issue 1, 2017, Pages 111-130]

  • Segmental Lining A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]

  • Segmental Lining Effect of segmental joint stiffness on tunnel lining internal forces under static conditions [Volume 10, Issue 4, 2019, Pages 1031-1043]

  • Segmental Lining Effect of Segmental Joint on Internal Forces in Tunnel Lining under Seismic Loading by Numerical Method [Volume 11, Issue 3, 2020, Pages 737-751]

  • Segmental lining joint A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]

  • Seismic A new stochastic 3D seismic inversion using direct sequential simulation and co-simulation in a genetic algorithm framework [Volume 8, Issue 3, 2017, Pages 321-335]

  • Seismic Attributes Application of Artificial Neural Networks and Support Vector Machines for carbonate pores size estimation from 3D seismic data [Volume 4, Issue 1, 2013, Pages 1-14]

  • Seismic design A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]

  • Seismic Hazard Analysis A comparison between effects of earthquake and blasting on stability of mine slopes: a case study of Chadormalu open-pit mine [Volume 10, Issue 1, 2019, Pages 223-240]

  • Seismic Imaging Subsurface modeling of mud volcanoes, using density model and analysis of seismic velocity [Volume 6, Issue 1, 2015, Pages 31-39]

  • Seismic Inversion Application of Artificial Neural Networks and Support Vector Machines for carbonate pores size estimation from 3D seismic data [Volume 4, Issue 1, 2013, Pages 1-14]

  • Seismic Loading Effect of Segmental Joint on Internal Forces in Tunnel Lining under Seismic Loading by Numerical Method [Volume 11, Issue 3, 2020, Pages 737-751]

  • Selective Sequential Extraction Using selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system [Volume 9, Issue 2, 2018, Pages 473-484]

  • Selenium Extraction Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]

  • Semi-infinite problems A boundary element/finite difference analysis of subsidence phenomenon due to underground structures [Volume 8, Issue 2, 2017, Pages 237-253]

  • Sensitivity Analysis Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]

  • Sensitivity Analysis A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]

  • Sensitivity Analysis Stability Analysis of Salt Cavern Gas Storage Using 2D Thermo-Hydro-Mechanical Finite-Element Software [Volume 11, Issue 1, 2020, Pages 77-97]

  • Separation Efficiency Prediction of effect of fine particle removal on efficiency of a spiral circuit by size-by-size partition curves [Volume 8, Issue 4, 2017, Pages 567-571]

  • Separation Efficiency Use of density tracers in evaluating performance of Tri-Flo circuits Case study: Tabas (Iran) coal preparation plant [Volume 10, Issue 2, 2019, Pages 441-450]

  • Separation Factor Investigation of performances of solvents D2EHPA, Cyanex272, and their mixture system in separation of some rare earth elements from a Nitric Acid solution [Volume 7, Issue 2, 2016, Pages 143-148]

  • Sepiolite and Zeolite Nanoparticles Evaluating performance of natural sepiolite and zeolite nanoparticles for nickel, antimony, and arsenic removal from synthetic wastewater [Volume 9, Issue 4, 2018, Pages 1049-1064]

  • Sequential Extraction Potential of OM of Iranian peat and swamp and characterization of physico-chemical properties of organic soils [Volume 10, Issue 2, 2019, Pages 401-416]

  • Sequential Gaussian Simulation Spatial modelling of zonality elements based on compositional nature of geochemical data using geostatistical approach: a case study of Baghqloom area, Iran [Volume 9, Issue 1, 2018, Pages 153-167]

  • Sequential Gaussian Simulation Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]

  • Sequential Indicator Simulation Assessment of an ore body internal dilution based on multivariate geostatistical simulation using exploratory drill hole data [Volume 10, Issue 1, 2019, Pages 271-286]

  • Settlement Numerical Modelling of Backfill Grouting Approaches in EPB Tunneling [Volume 11, Issue 1, 2020, Pages 301-314]

  • Settling Velocity A new approach to define batch settling curves for analyzing the sedimentation characteristics [Volume 3, Issue 2, 2012, Pages 103-111]

  • Settling Velocity A New Approach for Obtaining Settling Velocity in a Thickener Using Statistical Regression: A Case Study [Volume 7, Issue 1, 2016, Pages 47-56]

  • Shahr-e-Babak A comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran [Volume 9, Issue 4, 2018, Pages 917-940]

  • Shahr-e-Babak Identification of geochemical anomalies associated with Cu mineralization by applying spectrum-area multi-fractal and wavelet neural network methods in Shahr-e-Babak mining area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 49-73]

  • Shaking Table Concentration and recycling of rare earth elements (REEs) from iron mine waste using a combination of physical separation methods [Volume 7, Issue 2, 2016, Pages 195-203]

  • Shear failure mechanism A 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks [Volume 11, Issue 2, 2020, Pages 467-480]

  • Shear Testing Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]

  • Shear Wave Joint inversion of ReMi dispersion curves and refraction travel times using particle swarm optimization algorithm [Volume 7, Issue 1, 2016, Pages 67-79]

  • Shell Liner Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]

  • Short time Fourier transform Formation interface detection using Gamma Ray log: A novel approach [Volume 3, Issue 1, 2012, Pages 41-50]

  • Shrinkage Limit Density Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]

  • Shrinking Core Model Investigation of leaching kinetics of zinc from a low-grade ore in organic and inorganic acids [Volume 8, Issue 4, 2017, Pages 579-591]

  • Shrinking Core Model (SCM) Kinetics of chemical leaching of chalcocite from low-grade copper ore: size-distribution behavior [Volume 6, Issue 1, 2015, Pages 109-118]

  • Sierra Leone Mining and Environmental Degradation: a Gift Brings Grief Scenario for Mining Communities in Sierra Leone [Volume 11, Issue 2, 2020, Pages 347-361]

  • Simple Kriging Application of fractal modeling to delineate alteration zones and lithological units in Masjed-Daghi Cu-Au porphyry deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 339-356]

  • Simulated annealing Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines [Volume 10, Issue 4, 2019, Pages 903-916]

  • Simulation Modelling of the kaolin deposits and reserve classification challenges of Charentes Basin, France [Volume 1, Number 1, 2010]

  • Simulation Application of perfect mixing model for simulation of vertical roller mills [Volume 8, Issue 4, 2017, Pages 545-553]

  • Simulation Prediction of effect of fine particle removal on efficiency of a spiral circuit by size-by-size partition curves [Volume 8, Issue 4, 2017, Pages 567-571]

  • Simulation Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]

  • Simulation Combined DEM and SPH simulation of ball milling [Volume 10, Issue 1, 2019, Pages 151-161]

  • Simulation A Mathematical Model to Optimize Allocation Sequence in Dispatching Problem [Volume 11, Issue 1, 2020, Pages 185-192]

  • Simultaneous Ultrasonic Treatment A review of simultaneous ultrasound-assisted coal flotation [Volume 9, Issue 3, 2018, Pages 679-689]

  • SIS Geostatistical simulation of dyke systems in Sungun porphyry copper deposit, Iran [Volume 6, Issue 1, 2015, Pages 1-10]

  • Sistan and Baluchestan Province Selection of chromite processing plant site using fuzzy analytic hierarchy process (FAHP) [Volume 8, Issue 2, 2017, Pages 155-162]

  • Size-by-Size Partition Curve Prediction of effect of fine particle removal on efficiency of a spiral circuit by size-by-size partition curves [Volume 8, Issue 4, 2017, Pages 567-571]

  • Slide-Head-Toppling Numerical analysis of slide-head-toppling failure [Volume 10, Issue 4, 2019, Pages 1001-1011]

  • Slopes A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes [Volume 9, Issue 4, 2018, Pages 959-966]

  • Slope Stability Prediction of slope stability using adaptive neuro-fuzzy inference system based on clustering methods [Volume 8, Issue 2, 2017, Pages 163-177]

  • Slope Stability A field investigation of application of digital terrestrial photogrammetry to characterize geometric properties of discontinuities in open-pit slopes [Volume 8, Issue 3, 2017, Pages 455-465]

  • Slope Stability Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]

  • Slope Stability Investigation of Bishop’s and Janbu’s Models Capabilities on Slope Stability Problems with Special Consideration to Open-Pit Mining Operations [Volume 11, Issue 1, 2020, Pages 161-170]

  • Slope Stability A Preliminary Assessment of Rock Slope Stability in Tropical Climates: A Case Study at Lafarge Quarry, Perak, Malaysia [Volume 11, Issue 3, 2020, Pages 661-673]

  • Smile Correction Role of smile correction in mineral detection on hyperion data [Volume 7, Issue 2, 2016, Pages 261-272]

  • SNESIM Algorithm, MCDM, Sungun Porphyry-Cu Deposit An Optimum Selection of Simulated Geological Models by Multi-Point Geostatistics and Multi-Criteria Decision-Making Approaches; a Case Study in Sungun Porphyry-Cu deposit, Iran [Volume 11, Issue 2, 2020, Pages 481-503]

  • Soft Classification Sub-pixel classification of hydrothermal alteration zones using a kernel-based method and hyperspectral data; A case study of Sarcheshmeh Porphyry Copper Mine and surrounding area, Kerman, Iran [Volume 8, Issue 4, 2017, Pages 555-565]

  • Soft ground tunneling A 3D Finite-Difference Analysis of Interaction between a Newly-Driven Large Tunnel with Twin Tunnels in Urban Areas [Volume 11, Issue 3, 2020, Pages 809-823]

  • Soil arching Influence of modeling material on undercut slope failure mechanism [Volume 8, Issue 4, 2017, Pages 645-662]

  • Soil Contamination Heavy metal pollution and identification of their sources in soil over Sangan iron-mining region, NE Iran [Volume 8, Issue 2, 2017, Pages 277-289]

  • Soil material properties Influence of modeling material on undercut slope failure mechanism [Volume 8, Issue 4, 2017, Pages 645-662]

  • Soil Stabilization Mechanical Properties of Low Plasticity Clay Soil Stabilized with Iron Ore Mine Tailing and Portland Cement [Volume 11, Issue 3, 2020, Pages 837-853]

  • Solid liquid separation A new approach to define batch settling curves for analyzing the sedimentation characteristics [Volume 3, Issue 2, 2012, Pages 103-111]

  • Solvent extraction Gallium extraction from Jajarm Bayer process liquor using micro-emulsions [Volume 8, Issue 2, 2017, Pages 269-276]

  • Solvent extraction Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]

  • Solvent extraction Solvent extraction of copper from an industrial sulfate liquor using Chemorex CP-150 [Volume 9, Issue 4, 2018, Pages 905-916]

  • Solvent extraction and stripping Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]

  • Soma Mine Analysis of a possible root cause and mechanism for Soma mine disaster [Volume 10, Issue 1, 2019, Pages 1-26]

  • Sonchus Oleraceus L Metal(loid) uptake of Sonchus oleraceus grown around Cheshmeh-Konan copper deposit, NW Iran [Volume 10, Issue 2, 2019, Pages 517-528]

  • Sophisticated Geological Units An Optimum Selection of Simulated Geological Models by Multi-Point Geostatistics and Multi-Criteria Decision-Making Approaches; a Case Study in Sungun Porphyry-Cu deposit, Iran [Volume 11, Issue 2, 2020, Pages 481-503]

  • Sorption Evaluation of background geochemical speciation of heavy metals in overburden topsoil of bituminous sand deposit area, Ondo state, Nigeria [Volume 10, Issue 4, 2019, Pages 869-882]

  • Southern Khorasan Local multivariate outliers as geochemical anomaly halos indicators, a case study: Hamich area, Southern Khorasan, Iran [Volume 8, Issue 2, 2017, Pages 179-189]

  • Southern part of Iran The impact of poor cementing casing damage: A numerical simulation study [Volume 6, Issue 1, 2015, Pages 41-53]

  • Sparging system Comparison between Helical and Elliptical Static Mixers Performance in Column Flotation of Sungun Copper Plant [Volume 11, Issue 1, 2020, Pages 221-230]

  • Sparseness Constraint 3D gravity data-space inversion with sparseness and bound constraints [Volume 8, Issue 2, 2017, Pages 227-235]

  • Spatial cross-correlation Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]

  • Specialization Stage specialization for design and analysis of flotation circuits [Volume 10, Issue 1, 2019, Pages 37-47]

  • Speciation Leaching of gold ores with high cyanicides: a physico-chemical modeling approach [Volume 10, Issue 1, 2019, Pages 87-94]

  • Speciation Evaluation of background geochemical speciation of heavy metals in overburden topsoil of bituminous sand deposit area, Ondo state, Nigeria [Volume 10, Issue 4, 2019, Pages 869-882]

  • Specific Charge and specific Drilling A new technical and economic model to calculate specific charge and specific drilling using hole diameter, height bench, uniaxial compressive strength, and joint set orientation [(Articles in Press)]

  • Specific drilling Blast Design for Improved Productivity using a Modified Available Energy Method [Volume 11, Issue 3, 2020, Pages 643-659]

  • Specific rate of Breakage Effect of thermal treatment on specific rate of breakage of manganese ore [Volume 9, Issue 2, 2018, Pages 339-348]

  • Spectral Angle Mapper Evaluating the effect of using different reference spectra on SAM classification results: an implication for hydrothermal alteration mapping [Volume 9, Issue 4, 2018, Pages 981-997]

  • Spectral-Induced Polarization Using a combination of genetic algorithm and particle swarm optimization algorithm for GEMTIP modeling of spectral-induced polarization data [Volume 10, Issue 2, 2019, Pages 493-505]

  • Spectral Unmixing Sub-pixel classification of hydrothermal alteration zones using a kernel-based method and hyperspectral data; A case study of Sarcheshmeh Porphyry Copper Mine and surrounding area, Kerman, Iran [Volume 8, Issue 4, 2017, Pages 555-565]

  • Spectrum-Area Multi-Fractal Model Identification of geochemical anomalies associated with Cu mineralization by applying spectrum-area multi-fractal and wavelet neural network methods in Shahr-e-Babak mining area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 49-73]

  • Spectrum-Volume Fractal Model Application of spectrum-volume fractal modeling for detection of mineralized zones [Volume 9, Issue 2, 2018, Pages 371-378]

  • SPH Combined DEM and SPH simulation of ball milling [Volume 10, Issue 1, 2019, Pages 151-161]

  • SPI Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills [Volume 2, Issue 1, 2011]

  • SPI Development of Geometallurgical Indices for Semi-Autogenous Grinding at Sarcheshmeh Porphyry Copper Mine [Volume 11, Issue 2, 2020, Pages 375-385]

  • Spiral Separator Prediction of effect of fine particle removal on efficiency of a spiral circuit by size-by-size partition curves [Volume 8, Issue 4, 2017, Pages 567-571]

  • Spontaneous Combustion of Coal Studying Relationship between Coal Intrinsic Characteristics in Spontaneous Combustion of Coal Potential Using Crossing Point Temperature Test Method [Volume 11, Issue 1, 2020, Pages 315-333]

  • SPSS software A Correlation for Estimating LCPC Abrasivity Coefficient using Rock Properties [Volume 11, Issue 3, 2020, Pages 799-808]

  • Sr And Nd Isotopes Geochemistry, petrology, and mineralization in volcanic rocks located in south Neyshabour, NE Iran [Volume 8, Issue 2, 2017, Pages 139-154]

  • SRTM Assessment of Terrain and Land Use/Land Cover Change of Mine Sites Using Geospatial Techniques in Plateau State, Nigeria [(Articles in Press)]

  • SSE differential Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]

  • Stability analysis Stability Analysis of Salt Cavern Gas Storage Using 2D Thermo-Hydro-Mechanical Finite-Element Software [Volume 11, Issue 1, 2020, Pages 77-97]

  • Stability Time Long-term stability analysis of goaf area in longwall mining using minimum potential energy theory [Volume 9, Issue 1, 2018, Pages 169-182]

  • Stabilizer Using an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency [Volume 10, Issue 2, 2019, Pages 417-428]

  • Staged Factor Analysis Delineation of podiform-type chromite mineralization using geochemical mineralization prospectivity index and staged factor analysis in Balvard area (SE Iran) [Volume 10, Issue 3, 2019, Pages 705-715]

  • Staged Factor Analysis Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]

  • Standardized Hyperspectral Processing Methodology Role of smile correction in mineral detection on hyperion data [Volume 7, Issue 2, 2016, Pages 261-272]

  • Start-Up Fundamental understanding of goaf gas displacement in longwall goaf [Volume 6, Issue 2, 2015, Pages 191-203]

  • Statistical analyses Probabilistic prediction of acid mine drainage generation risk based on pyrite oxidation process in coal washery rejects - A Case Study [(Articles in Press)]

  • Statistical Analysis A new brittleness index for estimation of rock fracture toughness [Volume 8, Issue 1, 2017, Pages 83-91]

  • Statistical Analysis A Correlation for Estimating LCPC Abrasivity Coefficient using Rock Properties [Volume 11, Issue 3, 2020, Pages 799-808]

  • Statistical Moments Method Probabilistic analysis of stability of chain pillars in Tabas coal mine in Iran using Monte Carlo simulation [Volume 7, Issue 1, 2016, Pages 25-35]

  • Statistical Regression A New Approach for Obtaining Settling Velocity in a Thickener Using Statistical Regression: A Case Study [Volume 7, Issue 1, 2016, Pages 47-56]

  • Steady-State Creep Model Feasibility study of underground salt caverns in Western Newfoundland: experimental and finite element investigation of creep-induced damage [Volume 6, Issue 2, 2015, Pages 205-224]

  • Steeply Inclined Coal Seams Determination of a suitable extraction equipment in mechanized longwall mining in steeply inclined coal seams using fuzzy analytical hierarchy method (Case study: Hamkar coal mine, Iran) [Volume 8, Issue 3, 2017, Pages 487-499]

  • Stepwise factor analysis Determination of geochemical anomalies and gold mineralized stages based on litho-geochemical data for Zarshuran Carlin-like gold deposit (NW Iran) utilizing multi-fractal modeling and stepwise factor analysis [Volume 8, Issue 4, 2017, Pages 593-610]

  • Stereomodel A field investigation of application of digital terrestrial photogrammetry to characterize geometric properties of discontinuities in open-pit slopes [Volume 8, Issue 3, 2017, Pages 455-465]

  • Stereonet 3D Characterization of Uniaxial Compressive Strength of Transversely-Isotropic Intact Rocks [Volume 11, Issue 2, 2020, Pages 629-641]

  • Stochastic Programming Application of stochastic programming for iron ore quality control [Volume 9, Issue 2, 2018, Pages 331-338]

  • Stochastic Seismic Inversion A new stochastic 3D seismic inversion using direct sequential simulation and co-simulation in a genetic algorithm framework [Volume 8, Issue 3, 2017, Pages 321-335]

  • Stope Unplanned Dilution Index A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]

  • Strain Softening Behavior Study of convergence confinement method curves considering pore-pressure effect [Volume 10, Issue 2, 2019, Pages 479-492]

  • Strata Control Analysis of a possible root cause and mechanism for Soma mine disaster [Volume 10, Issue 1, 2019, Pages 1-26]

  • Strategy Selection of the best strategy for Iran's quarries: SWOT-FAHP method [Volume 3, Issue 1, 2012, Pages 1-13]

  • Stratified Cox Regression Method (SCRM) Maintainability measure based on operating environment, a case study: Sungun copper mine [Volume 8, Issue 3, 2017, Pages 511-521]

  • Stream sediment Application of continuous restricted Boltzmann machine to detect multivariate anomalies from stream sediment geochemical data, Korit, East of Iran [Volume 8, Issue 4, 2017, Pages 673-682]

  • Stream sediment Evaluation of stream sediment contamination by potentially toxic elements around mining and farming areas (SE Nigeria) [Volume 10, Issue 4, 2019, Pages 833-851]

  • Strength Parameters Effect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study) [Volume 10, Issue 1, 2019, Pages 257-270]

  • Stress-dependent permeability, fracture dip angle Relationship between fracture dip angle, aperture and fluid flow in the fractured rock masses [Volume 2, Issue 2, 2011, Pages 136-145]

  • Stress Intensity Factor (SIF) Extended finite element simulation of crack propagation in cracked Brazilian disc [Volume 6, Issue 1, 2015, Pages 95-102]

  • Strike-Slip Faults 3D stochastic rock fracture modeling related to strike-slip faults [Volume 6, Issue 2, 2015, Pages 169-181]

  • Stripping Solvent extraction of copper from an industrial sulfate liquor using Chemorex CP-150 [Volume 9, Issue 4, 2018, Pages 905-916]

  • Sub-level Caving A New Mathematical Model for Production Scheduling in Sub-level Caving Mining Method [Volume 11, Issue 3, 2020, Pages 765-778]

  • Sub-Ore Gradient Anomaly Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]

  • Subsidence A boundary element/finite difference analysis of subsidence phenomenon due to underground structures [Volume 8, Issue 2, 2017, Pages 237-253]

  • Subsidence Analysis of a possible root cause and mechanism for Soma mine disaster [Volume 10, Issue 1, 2019, Pages 1-26]

  • Subtractive clustering method A New Method for Predicting Indirect Tensile Strength of Sandstone Rock Samples [Volume 11, Issue 3, 2020, Pages 899-908]

  • Subway Station Method of Grading Subway Stations Based on Evacuation Capability: A Quantitative Method [Volume 11, Issue 2, 2020, Pages 587-609]

  • Sulfate Ion Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]

  • Sulfide Ores Kinetics of Sphalerite Leaching by Sodium Nitrate in Sulfuric Acid [Volume 7, Issue 1, 2016, Pages 1-12]

  • Sulfur Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design [Volume 9, Issue 3, 2018, Pages 657-665]

  • Sungun Application of spectrum-volume fractal modeling for detection of mineralized zones [Volume 9, Issue 2, 2018, Pages 371-378]

  • Sungun and Astamal (Iran) Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]

  • Sungun Copper Mine Maintainability measure based on operating environment, a case study: Sungun copper mine [Volume 8, Issue 3, 2017, Pages 511-521]

  • Sungun Copper Mine Analysis of reliability and maintainability for multiple repairable units (Case study: Sungun copper mine) [Volume 10, Issue 4, 2019, Pages 1045-1059]

  • Sungun Copper plant Comparison between Helical and Elliptical Static Mixers Performance in Column Flotation of Sungun Copper Plant [Volume 11, Issue 1, 2020, Pages 221-230]

  • Support Vector Machine Support vector regression for prediction of gas reservoirs permeability [Volume 2, Issue 1, 2011]

  • Support Vector Machine Prediction of ultimate strength of shale using artificial neural network [Volume 9, Issue 1, 2018, Pages 91-105]

  • Support Vector Machine A Comparative Study of SVM and RF Methods for Classification of Alteration Zones Using Remotely Sensed Data [Volume 11, Issue 1, 2020, Pages 49-61]

  • Support Vector Machines A comparative study of performance of K-nearest neighbors and support vector machines for classification of groundwater [Volume 7, Issue 2, 2016, Pages 149-164]

  • Support Vector Regression (SVR) Sub-pixel classification of hydrothermal alteration zones using a kernel-based method and hyperspectral data; A case study of Sarcheshmeh Porphyry Copper Mine and surrounding area, Kerman, Iran [Volume 8, Issue 4, 2017, Pages 555-565]

  • Support Vector Regression (SVR) Predicting tensile strength of rocks from physical properties based on support vector regression optimized by cultural algorithm [Volume 8, Issue 3, 2017, Pages 467-474]

  • Supra-Ore Gradient Anomaly Application of concentration gradient coefficients in mining geochemistry: A comparison of copper mineralization in Iran and Canada [Volume 9, Issue 1, 2018, Pages 277-292]

  • Surface Mining Monitoring and assessment of pollutants resulting from bench-blasting operations [Volume 7, Issue 1, 2016, Pages 109-118]

  • Surface Mining Optimal Earthmoving Fleet Size for Minimising Emissions and Cost [(Articles in Press)]

  • Surface reactivity An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]

  • Surface roughness Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]

  • Surface species An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]

  • Surface Wettability Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena [Volume 10, Issue 3, 2019, Pages 787-797]

  • Sustainable Development Semi-quantitative environmental impact assessment and sustainability level determination of coal mining using a mathematical model [Volume 7, Issue 2, 2016, Pages 185-193]

  • Sustainable Development Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]

  • Sustainable Development Sustainable development and environmental challenges in Cameroon’s mining sector: A review [Volume 9, Issue 2, 2018, Pages 293-309]

  • Sustainable Development A Safe and Sustainable Development in a Hygiene and Healthy Company Using Decision Matrix Risk Assessment Technique: a case study [Volume 11, Issue 2, 2020, Pages 363-373]

  • SUTHEM Inverse modeling of HEM data using a new inversion algorithm [Volume 1, Number 2, 2010]

  • SW Ashanti Impact of mining on groundwater quality in SW Ashanti, Ghana: a preliminary study [Volume 7, Issue 1, 2016, Pages 81-95]

  • SWOT Selection of the best strategy for Iran's quarries: SWOT-FAHP method [Volume 3, Issue 1, 2012, Pages 1-13]

  • Synergism Investigation of Mechanism of Adsorption of Xanthate and Hydroxamate on Malachite [Volume 11, Issue 3, 2020, Pages 921-933]

  • Synthetic Data Application of Artificial Neural Networks and Support Vector Machines for carbonate pores size estimation from 3D seismic data [Volume 4, Issue 1, 2013, Pages 1-14]

  • System of Equations A programming method to estimate proximate parameters of coal beds from well-logging data using a sequential solving of linear equation systems [Volume 10, Issue 3, 2019, Pages 633-647]

T

  • Tabas Coal-fired power plant Determination of an optimum interface between open pit and underground mining activities in Mazinu coal mine of Tabas power plant [(Articles in Press)]

  • Tabas Coal Mine Development of a site-specific regression model for assessment of road-header cutting performance of Tabas coal mine based on rock properties [Volume 8, Issue 4, 2017, Pages 663-672]

  • Tabas Parvadeh Coal Mines Studying Relationship between Coal Intrinsic Characteristics in Spontaneous Combustion of Coal Potential Using Crossing Point Temperature Test Method [Volume 11, Issue 1, 2020, Pages 315-333]

  • Tagouchi Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill [Volume 5, Issue 2, 2014, Pages 121-128]

  • Tail gap Numerical Modelling of Backfill Grouting Approaches in EPB Tunneling [Volume 11, Issue 1, 2020, Pages 301-314]

  • Tailgate (TG) Fundamental understanding of goaf gas displacement in longwall goaf [Volume 6, Issue 2, 2015, Pages 191-203]

  • Tailings Using Trifolium Alexanderium for Phytoremediation of some heavy metals in tailings dam in Anjir-Tange coal washing plant, Mazandaran, Iran [Volume 6, Issue 2, 2015, Pages 141-150]

  • Tailing Storage Facility Clay sedimentation and consolidation behaviour in tailing storage facilities over mine lifetime [Volume 10, Issue 1, 2019, Pages 113-124]

  • Taknar Deposit Selection of new exploration targets using lithogeochemical data obtained for Taknar deposit located in NE of Iran [Volume 6, Issue 1, 2015, Pages 11-20]

  • TBM Estimation of penetration rate of tunnel boring machines using Monte-Carlo simulation method [Volume 7, Issue 2, 2016, Pages 175-184]

  • TBM Introducing hard rock TBMs’ downtime analysis model with reference to past case histories’ data [Volume 9, Issue 2, 2018, Pages 457-472]

  • TBM TBM Tunneling Construction Time with Respect to Learning Phase Period and Normal Phase Period [Volume 11, Issue 2, 2020, Pages 539-554]

  • TBM downtimes Evaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2) [Volume 3, Issue 2, 2012, Pages 89-98]

  • TBM Utilization Introducing hard rock TBMs’ downtime analysis model with reference to past case histories’ data [Volume 9, Issue 2, 2018, Pages 457-472]

  • Tekab Township Negative impacts of mine exploitations on rural regions of Tekab Township [Volume 7, Issue 1, 2016, Pages 57-66]

  • Tellurium Extraction Removal of Te and Se anions in alkaline media in presence of cyanide by quaternary ammonium salts [Volume 9, Issue 2, 2018, Pages 311-317]

  • Temperature Effect of temperature as well as heating and cooling cycles on rock properties [Volume 8, Issue 4, 2017, Pages 631-644]

  • Temperature Effects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone) [Volume 9, Issue 2, 2018, Pages 379-391]

  • Tendon Technology Innovative approach to strata reinforcement in coal mines with reference to evaluation cable bolts shear strength [Volume 9, Issue 3, 2018, Pages 703-715]

  • Tensile Strength (TS) of Rocks Predicting tensile strength of rocks from physical properties based on support vector regression optimized by cultural algorithm [Volume 8, Issue 3, 2017, Pages 467-474]

  • Theoretical Analysis Deformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof [Volume 9, Issue 3, 2018, Pages 771-784]

  • Thermal Treatment Effect of thermal treatment on specific rate of breakage of manganese ore [Volume 9, Issue 2, 2018, Pages 339-348]

  • Thermo-Chemical Investigation of parameters affecting desilication of diasporic bauxite in Jajarm mine by thermo-chemical treatment [Volume 8, Issue 1, 2017, Pages 75-81]

  • Thiosulfate Prediction of recovery of gold thiosulfate on activated carbon using artificial neural networks [Volume 5, Issue 1, 2014, Pages 55-66]

  • Threshold Discriminating copper geochemical anomalies and assessment of their reliability using a combination of sequential Gaussian simulation and gap statistic methods in Hararan area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 75-86]

  • Time Sequence Effects of operating parameters on time-dependent ash entrainment behaviour of a sample coal flotation [Volume 8, Issue 3, 2017, Pages 337-357]

  • Titanomagnetite Mineralogical and physical beneficiation studies for iron extraction from Bardaskan titanomagnetite placer deposit [Volume 8, Issue 2, 2017, Pages 191-201]

  • TODIM A new model for mining method selection based on grey and TODIM methods [Volume 8, Issue 1, 2017, Pages 49-60]

  • Tool Wear Determination of scratching energy index for Cerchar abrasion test [Volume 9, Issue 1, 2018, Pages 73-89]

  • TOPSIS Risk management in urban tunnels using methods of game theory and multi-criteria decision-making [Volume 10, Issue 3, 2019, Pages 597-611]

  • TOPSIS Investigating and Ranking Blasting Patterns to Reduce Ground Vibration using Soft Computing Approaches and MCDM Technique [Volume 11, Issue 3, 2020, Pages 881-897]

  • Torud-Chah Shiran area GIS modelling for Au-Pb-Zn potential mapping in Torud-Chah Shirin area-Iran [Volume 1, Number 1, 2010]

  • Toxic Elements Evaluating performance of natural sepiolite and zeolite nanoparticles for nickel, antimony, and arsenic removal from synthetic wastewater [Volume 9, Issue 4, 2018, Pages 1049-1064]

  • Toxic Gases Monitoring and assessment of pollutants resulting from bench-blasting operations [Volume 7, Issue 1, 2016, Pages 109-118]

  • Trace Elements Metal extraction competence of plants on waste dumps of magnesite mine, Salem District, South India [Volume 4, Issue 2, 2013, Pages 113-124]

  • Trace Elements Impact of mining on groundwater quality in SW Ashanti, Ghana: a preliminary study [Volume 7, Issue 1, 2016, Pages 81-95]

  • Trace Elements Distribution of trace elements in coal and coal fly ash and their recovery with mineral processing practices: A review [Volume 9, Issue 3, 2018, Pages 641-655]

  • Traditional and Industrial Ovens Ranking and comparing of traditional and industrial coke making by TOPSIS technique in Shahrood Simin Coke Company [Volume 7, Issue 2, 2016, Pages 165-173]

  • Training Image An Optimum Selection of Simulated Geological Models by Multi-Point Geostatistics and Multi-Criteria Decision-Making Approaches; a Case Study in Sungun Porphyry-Cu deposit, Iran [Volume 11, Issue 2, 2020, Pages 481-503]

  • Translocation factor Field study on Re and heavy metal phytoextraction and phytomining potentials by native plant species growing at Sarcheshmeh copper mine tailings, SE Iran [Volume 9, Issue 1, 2018, Pages 183-194]

  • Translocation Factor (TF) Phytoextraction-based process of metal absorption from soil in mining areas (tailing dams) by Medicago sativa L. (Alfalfa) (Case study: Sarcheshmeh porphyry copper mine, SE of Iran) [Volume 8, Issue 3, 2017, Pages 419-431]

  • Transportation Development of a goal programming model for optimization of truck allocation in open pit mines [Volume 8, Issue 3, 2017, Pages 359-371]

  • Transversely-isotropic 3D Characterization of Uniaxial Compressive Strength of Transversely-Isotropic Intact Rocks [Volume 11, Issue 2, 2020, Pages 629-641]

  • Travel Time Joint inversion of ReMi dispersion curves and refraction travel times using particle swarm optimization algorithm [Volume 7, Issue 1, 2016, Pages 67-79]

  • Triaxial Compressive Strength Effect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study) [Volume 10, Issue 1, 2019, Pages 257-270]

  • Tri-Flo Use of density tracers in evaluating performance of Tri-Flo circuits Case study: Tabas (Iran) coal preparation plant [Volume 10, Issue 2, 2019, Pages 441-450]

  • Trifolium Alexanderium Using Trifolium Alexanderium for Phytoremediation of some heavy metals in tailings dam in Anjir-Tange coal washing plant, Mazandaran, Iran [Volume 6, Issue 2, 2015, Pages 141-150]

  • Tromp curve Multiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics [Volume 4, Issue 1, 2013, Pages 67-76]

  • Truck Allocation Development of a goal programming model for optimization of truck allocation in open pit mines [Volume 8, Issue 3, 2017, Pages 359-371]

  • Truck Allocation Software Development of a goal programming model for optimization of truck allocation in open pit mines [Volume 8, Issue 3, 2017, Pages 359-371]

  • Truck-Shovel allocation Modeling and Optimization of Truck-Shovel Allocation to Mining Faces in Cement Quarry [Volume 11, Issue 1, 2020, Pages 21-30]

  • Tunnel Calculation of tunnel behavior in viscoelastic rock mass [Volume 4, Issue 1, 2013, Pages 27-33]

  • Tunnel Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel) [Volume 8, Issue 1, 2017, Pages 111-130]

  • Tunnel Introducing hard rock TBMs’ downtime analysis model with reference to past case histories’ data [Volume 9, Issue 2, 2018, Pages 457-472]

  • Tunnel Behavior of a Tunnel and its Neighboring Joint with and without Presence of Rock Bolt under Biaxial Loads; Particle Flow Code Approach [Volume 11, Issue 3, 2020, Pages 855-864]

  • Tunnel Boring machine Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]

  • Tunnel Boring machine A comparative study of two meta-heuristic algorithms in optimizing cost of reinforced concrete segmental lining [Volume 10, Issue 1, 2019, Pages 95-112]

  • Tunnel Boring machine Airflow inside tunnel boring machine: A numerical study and an experimental verification [Volume 10, Issue 3, 2019, Pages 623-632]

  • Tunnel Boring Machines A state-of-the-art review of mechanical rock excavation technologies [Volume 1, Number 1, 2010]

  • Tunneling Boring Machine A Numerical Investigation for TBM Disc Cutter Life Prediction in Hard Rocks [(Articles in Press)]

  • Tunnel Stability Analysis Stability analysis of support systems using a coupled FEM-DFN model (Case study: a diversion tunnel at Lorestan dam site, Iran) [Volume 9, Issue 2, 2018, Pages 485-497]

  • Tunnel support systems A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading [Volume 10, Issue 4, 2019, Pages 979-999]

  • Turbulence Effect of impeller speed on properties of quiescent zone and entrainment in mechanical flotation cells [Volume 9, Issue 4, 2018, Pages 807-816]

  • Two and Three Dimensional Effects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods [Volume 9, Issue 4, 2018, Pages 941-957]

U

  • UCS 3D Characterization of Uniaxial Compressive Strength of Transversely-Isotropic Intact Rocks [Volume 11, Issue 2, 2020, Pages 629-641]

  • UDEC Numerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: A case study of Bakhtiary Dam of Iran [Volume 4, Issue 1, 2013, Pages 15-26]

  • Ultimate pit limit Determination of the largest pit with the non-negative net profit in the open pit mines [Volume 1, Number 2, 2010]

  • Ultimate pit limit A new algorithm for optimum open pit design: Floating cone method III [Volume 2, Issue 2, 2011, Pages 118-125]

  • Ultrasonic Pre-treatment A review of simultaneous ultrasound-assisted coal flotation [Volume 9, Issue 3, 2018, Pages 679-689]

  • Ultrasound A review of simultaneous ultrasound-assisted coal flotation [Volume 9, Issue 3, 2018, Pages 679-689]

  • Uncertainties 3D model construction of induced polarization and resistivity data with quantifying uncertainties using geostatistical methods and drilling (Case study: Madan Bozorg, Iran) [Volume 9, Issue 4, 2018, Pages 857-872]

  • Uncertainty Robust production scheduling in open-pit mining under uncertainty: a box counterpart approach [Volume 8, Issue 2, 2017, Pages 255-267]

  • Uncertainty Optimal production strategy of bimetallic deposits under technical and economic uncertainties using stochastic chance-constrained programming [Volume 8, Issue 3, 2017, Pages 475-485]

  • Uncertainty Fuzzy tonnage-average grade model based on extension principle [Volume 10, Issue 3, 2019, Pages 659-666]

  • Uncertainty Fractal-wavelet-fusion-based re-ranking of joint roughness coefficients [Volume 10, Issue 4, 2019, Pages 1121-1133]

  • Uncertainty modeling Characterization of rare earth elements by coupling multivariate analysis, factor analysis, and geostatistical simulation; case-study of Gazestan deposit, central Iran [Volume 10, Issue 4, 2019, Pages 929-945]

  • Uncertainty Propagation Commodity price uncertainty propagation in open-pit mine production planning by Latin hypercube sampling method [Volume 7, Issue 2, 2016, Pages 215-227]

  • Uncertainty Reduction Bayesian Data Fusion: a Reliable Approach for Descriptive Modeling of Ore Deposits [Volume 11, Issue 1, 2020, Pages 63-76]

  • Unconfined compressive strength Predicting Unconfined Compressive Strength of Intact Rock Using New Hybrid Intelligent Models [Volume 11, Issue 1, 2020, Pages 231-246]

  • Undercut slopes Influence of modeling material on undercut slope failure mechanism [Volume 8, Issue 4, 2017, Pages 645-662]

  • Underground Contour Map Underground contour (UGC) mapping using potential field, well log and comparing with seismic interpretation in Lavarestan area [Volume 6, Issue 1, 2015, Pages 55-62]

  • Underground metal mine Dilution risk ranking in underground metal mines using Multi-Attributive Approximation area Comparison (MABAC) [(Articles in Press)]

  • Underground Mines Determining optimal distance from outlet of auxiliary forcing ventilation system to development of heading in underground mines [Volume 10, Issue 4, 2019, Pages 821-832]

  • Underground Mining Operational dynamics of “Galamsey” within eleven selected districts of western region of Ghana [Volume 8, Issue 1, 2017, Pages 11-34]

  • Underground Mining Structural analysis of impacting factors of sustainable development in underground coal mining using DEMATEL method [Volume 9, Issue 3, 2018, Pages 567-579]

  • Underground Mining A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]

  • Underground Mining Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]

  • Underground Mining Application of Sequential Gaussian Conditional Simulation to Underground Mine Design Under Grade Uncertainty [Volume 11, Issue 3, 2020, Pages 695-709]

  • Underground Mining A New Mathematical Model for Production Scheduling in Sub-level Caving Mining Method [Volume 11, Issue 3, 2020, Pages 765-778]

  • Underground Mining Determination of an optimum interface between open pit and underground mining activities in Mazinu coal mine of Tabas power plant [(Articles in Press)]

  • Unexploded Ordnance Enhancing magnetic signals in unexploded ordnances (UXO) detection based on edge-preserved stable downward continuation method [Volume 5, Issue 1, 2014, Pages 13-24]

  • Uniaxial compressive strength Application of Schmidt rebound number for estimating rock strength under specific geological conditions [Volume 1, Number 2, 2010]

  • Uniaxial compressive strength A New Method for Forecasting Uniaxial Compressive Strength of Weak Rocks [Volume 11, Issue 2, 2020, Pages 505-515]

  • Uniaxial compressive strength A new technical and economic model to calculate specific charge and specific drilling using hole diameter, height bench, uniaxial compressive strength, and joint set orientation [(Articles in Press)]

  • Uniaxial Creep Test Development of a new creep testing equipment to obtain long-term deformation parameters of salt rocks [Volume 3, Issue 1, 2012, Pages 27-32]

  • Uniaxial Creep Test Feasibility study of underground salt caverns in Western Newfoundland: experimental and finite element investigation of creep-induced damage [Volume 6, Issue 2, 2015, Pages 205-224]

  • Unplanned Dilution A new classification system for evaluation and prediction of unplanned dilution in cut-and-fill stoping method [Volume 9, Issue 4, 2018, Pages 873-892]

  • Upgradation Reprocessing of Sangan iron ore tailings by flotation [Volume 10, Issue 3, 2019, Pages 729-745]

  • Upgrading Beneficiation of a low-grade iron ore by combination of wet low-intensity magnetic separation and reverse flotation methods [Volume 10, Issue 1, 2019, Pages 197-212]

  • Upscaling Permeability upscaling in fractured reservoirs using different optimized mother wavelets at each level [Volume 7, Issue 2, 2016, Pages 239-250]

  • Upscaling Determination of optimal bandwidth in upscaling process of reservoir data using kernel function bandwidth [Volume 10, Issue 3, 2019, Pages 613-621]

  • Uranium Estimation of Cadmium and Uranium in a stream sediment from Eshtehard region in Iran using an Artificial Neural Network [Volume 7, Issue 1, 2016, Pages 97-107]

  • U-statistic A comparative study of fractal models and U-statistic method to identify geochemical anomalies; case study of Avanj porphyry system, Central Iran [Volume 9, Issue 1, 2018, Pages 209-227]

  • Utilization Evaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2) [Volume 3, Issue 2, 2012, Pages 89-98]

  • Utilization Simulation of tunnel boring machine utilization: A case study [Volume 9, Issue 1, 2018, Pages 53-60]

  • Utilization Distribution of trace elements in coal and coal fly ash and their recovery with mineral processing practices: A review [Volume 9, Issue 3, 2018, Pages 641-655]

  • UXO detection AN-EUL method for automatic interpretation of potential field data in unexploded ordnances (UXO) detection [Volume 5, Issue 2, 2014, Pages 67-77]

V

  • Vacuum filter Effects of Flocculant, Surfactant, Coagulant, and Filter Aid on Efficiency of Filtration Processing of Copper Concentrate: Mechanism and Optimization [Volume 11, Issue 1, 2020, Pages 119-141]

  • Vanadium Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology [Volume 10, Issue 1, 2019, Pages 241-255]

  • Variogram Geostatistical simulation of dyke systems in Sungun porphyry copper deposit, Iran [Volume 6, Issue 1, 2015, Pages 1-10]

  • Variogram Multivariate geostatistical estimation using minimum spatial cross-correlation factors (Case study: Cubuk Andesite quarry, Ankara, Turkey) [Volume 9, Issue 1, 2018, Pages 255-275]

  • Vein-Type Gold Deposit Geostatistical estimation to delineate oxide and sulfide zones using geophysical data; a case study of Chahar Bakhshi vein-type gold deposit, NE Iran [Volume 10, Issue 3, 2019, Pages 679-694]

  • Velocity Analysis Subsurface modeling of mud volcanoes, using density model and analysis of seismic velocity [Volume 6, Issue 1, 2015, Pages 31-39]

  • Velocity of Longitudinal Wave Effect of temperature as well as heating and cooling cycles on rock properties [Volume 8, Issue 4, 2017, Pages 631-644]

  • Ventilation Airflow inside tunnel boring machine: A numerical study and an experimental verification [Volume 10, Issue 3, 2019, Pages 623-632]

  • Ventilation Application of cut set method to reliability evaluation of mine ventilation networks [Volume 10, Issue 4, 2019, Pages 947-966]

  • Ventilation layout Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution [Volume 9, Issue 3, 2018, Pages 547-557]

  • VENTSIM 3D Application of VENTSIM 3D and mathematical programming to optimize underground mine ventilation network: A case study [Volume 9, Issue 3, 2018, Pages 741-752]

  • Vertical distribution Application of Power-Law Frequency Fractal Model for Recognition of Vertical Cu Distribution in Milloieh Porphyry Deposit, SE Iran [Volume 11, Issue 2, 2020, Pages 555-562]

  • Vertical electrical sounding (VES) Karstic water exploration using the Schlumberger VES and dipole–dipole resistivity profiling surveys in the Tepal area, west of Shahrood, Iran [Volume 5, Issue 1, 2014, Pages 1-12]

  • Vertical Roller Mill Application of perfect mixing model for simulation of vertical roller mills [Volume 8, Issue 4, 2017, Pages 545-553]

  • VHMS Geochemical and mineralogical characteristic of the VHMS alteration pipe, major elements variations and peraluminous ratio, in high grade metamorphosed rocks [Volume 1, Number 2, 2010]

  • VHMS Investigation of blind massive sulphide deposit signatures in the calcrete layers as a geochemical barrier: A case study of Areachap, Kantienpan and Copperton deposits [Volume 2, Issue 2, 2011, Pages 86-101]

  • Vibration Simulation Blast vibration modeling using linear superposition method [Volume 6, Issue 2, 2015, Pages 125-140]

  • Viscoelastic body Calculation of tunnel behavior in viscoelastic rock mass [Volume 4, Issue 1, 2013, Pages 27-33]

W

  • Wall's Rotational Invariant Measure Dimensionality analysis of subsurface structures in magnetotellurics using different methods (a case study: oil field in Southwest of Iran) [Volume 7, Issue 1, 2016, Pages 119-126]

  • Waste Stone Sludge Production of artificial stone slabs using waste granite and marble stone sludge samples [Volume 7, Issue 1, 2016, Pages 135-141]

  • Wastewater Predicting Arsenic Behavior in the Wastewater of Mouteh Gold Plant by Geochemical Modeling [Volume 4, Issue 1, 2013, Pages 57-65]

  • Wastewater Application of non-linear regression and soft computing techniques for modeling process of pollutant adsorption from industrial wastewaters [Volume 10, Issue 2, 2019, Pages 327-337]

  • Wastewater Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash [Volume 9, Issue 2, 2018, Pages 319-330]

  • Wastewater Assessment of Heavy Metal Contamination in Waters due to Mineral Salts Company from Mighan playa/lake, Arak, Iran [Volume 11, Issue 1, 2020, Pages 171-184]

  • Wastewater Comparative and Competitive Study of LDH/Diatomite and Chitosan/Diatomite for Adsorptive Removal of Chloride Ion from Aqueous Solution [Volume 11, Issue 1, 2020, Pages 261-279]

  • Wastewater Treatment Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium [Volume 1, Number 1, 2010]

  • Wastewater Treatment Magnetic Nano mineral and acid mine drainage interaction: An experimental study [Volume 8, Issue 3, 2017, Pages 447-453]

  • Wastewater Treatment An innovative application of (NiXZnX–X Fe2O4) Mineral nanoparticles for adsorption of Malachite green dye from wastewater effluents [Volume 9, Issue 1, 2018, Pages 143-152]

  • Water Study of convergence confinement method curves considering pore-pressure effect [Volume 10, Issue 2, 2019, Pages 479-492]

  • Water Inflow Estimation of groundwater inflow situation using fuzzy logic: a case study (Beheshtabad water conveying tunnel, Iran) [Volume 7, Issue 2, 2016, Pages 229-238]

  • Water quality Formation of a deep pit lake: case study of Aguas Claras, Brazil [Volume 1, Number 1, 2010]

  • Water quality Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]

  • Water Recovery Effects of operating parameters on time-dependent ash entrainment behaviour of a sample coal flotation [Volume 8, Issue 3, 2017, Pages 337-357]

  • Water Recovery Effects of Flocculant, Surfactant, Coagulant, and Filter Aid on Efficiency of Filtration Processing of Copper Concentrate: Mechanism and Optimization [Volume 11, Issue 1, 2020, Pages 119-141]

  • Water uses Formation of a deep pit lake: case study of Aguas Claras, Brazil [Volume 1, Number 1, 2010]

  • Wavelet Neural Network Identification of geochemical anomalies associated with Cu mineralization by applying spectrum-area multi-fractal and wavelet neural network methods in Shahr-e-Babak mining area, Kerman, Iran [Volume 10, Issue 1, 2019, Pages 49-73]

  • Wavelet Transform Formation interface detection using Gamma Ray log: A novel approach [Volume 3, Issue 1, 2012, Pages 41-50]

  • Wavelet Transform Permeability upscaling in fractured reservoirs using different optimized mother wavelets at each level [Volume 7, Issue 2, 2016, Pages 239-250]

  • Wear Profile Evolution of AG mill shell liner design at Gol-E-Gohar concentration plant [Volume 8, Issue 4, 2017, Pages 683-691]

  • Wear Profiles Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling [Volume 10, Issue 2, 2019, Pages 365-372]

  • Wear Rate Application of harmony search algorithm to evaluate performance of diamond wire saw [Volume 10, Issue 1, 2019, Pages 27-36]

  • Wedge failures A New Stability Approach using Probabilistic Profile along Direction of Excavation [Volume 11, Issue 1, 2020, Pages 1-20]

  • Weight of evidence method GIS modelling for Au-Pb-Zn potential mapping in Torud-Chah Shirin area-Iran [Volume 1, Number 1, 2010]

  • Weights-of-evidence model A GIS-based weights-of-evidence model for mineral potential mapping of hydrothermal gold deposits in Torbat-e-Heydarieh area [Volume 5, Issue 2, 2014, Pages 79-89]

  • Wellbore Instability Development of a mechanical earth model in an Iranian off-shore gas field [Volume 7, Issue 1, 2016, Pages 37-46]

  • Wellborn stability New empirical failure criterion for shale [Volume 10, Issue 1, 2019, Pages 287-304]

  • Well design Wellbore associated problems due to gas injection into non-horizontal structures [Volume 3, Issue 2, 2012, Pages 113-119]

  • Well Logging Studying empirical correlation between drilling specific energy and geo-mechanical parameters in an oil field in SW Iran [Volume 8, Issue 3, 2017, Pages 393-401]

  • Well-Logging A programming method to estimate proximate parameters of coal beds from well-logging data using a sequential solving of linear equation systems [Volume 10, Issue 3, 2019, Pages 633-647]

  • Well Stimulation Numerical investigation of effect of crack geometrical parameters on hydraulic fracturing process of hydrocarbon reservoirs [Volume 7, Issue 2, 2016, Pages 205-214]

  • Wet Low-Intensity Magnetic Separation Beneficiation of a low-grade iron ore by combination of wet low-intensity magnetic separation and reverse flotation methods [Volume 10, Issue 1, 2019, Pages 197-212]

  • WHO standard Identification of groundwater contamination sources of Lakan lead and zinc mine, Khomain, Iran [Volume 3, Issue 2, 2012, Pages 121-134]

  • Window Size Evaluation of effective factors in window optimization of fry analysis to identify mineralization pattern: Case study of Bavanat region, Iran [Volume 9, Issue 1, 2018, Pages 195-208]

  • Wolfram mine Assessment of water quality due to Wolfram mining in Portugal [Volume 1, Number 2, 2010]

  • Work Index A developed approach based on grinding time to determine ore comminution properties [Volume 4, Issue 2, 2013, Pages 105-112]

  • Work Index Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district [Volume 6, Issue 2, 2015, Pages 237-249]

X

  • Xanthate Investigation of effect of sulfate ion on xanthate consumption in galena flotation based on thermodynamic diagrams [Volume 9, Issue 4, 2018, Pages 1035-1048]

  • Xanthate collector An insight into effect of surface functional groups on reactivity of Sphalerite (110) surface with Xanthate collector: a DFT study [Volume 9, Issue 2, 2018, Pages 431-439]

  • XRF XRF analysis of coal bioleaching by chemolithoheterotrophic Alicyclobacillus HRM5 and chemolithoautotrophic Acidithiobacillus ferrooxidans [Volume 9, Issue 3, 2018, Pages 559-566]

Y

  • Yield Use of density tracers in evaluating performance of Tri-Flo circuits Case study: Tabas (Iran) coal preparation plant [Volume 10, Issue 2, 2019, Pages 441-450]

Z

  • Zarshouran Bio-accumulation of major, trace, and rare earth elements by two Astragalus species grown on Agh-Dareh and Zarshouran gold deposits, Takab, NW Iran [Volume 9, Issue 2, 2018, Pages 417-429]

  • Zarshouran Deposit Integrating Geophysical Attributes with New Cuckoo Search Machine-Learning Algorithm to Estimate Silver Grade Values–Case Study: Zarshouran Gold Mine [Volume 11, Issue 3, 2020, Pages 865-879]

  • Zarshuran Determination of geochemical anomalies and gold mineralized stages based on litho-geochemical data for Zarshuran Carlin-like gold deposit (NW Iran) utilizing multi-fractal modeling and stepwise factor analysis [Volume 8, Issue 4, 2017, Pages 593-610]

  • Zinc and Lead Oxide Minerals A comparative study of two-stage flotation of Zn and Pb oxide minerals using anionic, cationic, and mixed (cationic/anionic) collectors [Volume 9, Issue 4, 2018, Pages 1019-1033]

  • Zinc Recovery Investigation of leaching kinetics of zinc from a low-grade ore in organic and inorganic acids [Volume 8, Issue 4, 2017, Pages 579-591]

  • Zn(II) Biosorption of Lead (II) and Zinc (II) ions by pre-treated biomass of phanerochaete chrysosporium [Volume 1, Number 1, 2010]

  • Zn-Mn-Cd ions Solvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities [Volume 10, Issue 4, 2019, Pages 1083-1093]